FCIL, Noida

ABSTRACT OF COST

DSR -2018 NON-DSR TOTAL

S.NO DESCRIPTION AMOUNT AMOUNT AMOUNT

[A] BUILDING WORK

[B] INTERNAL & EXTERNAL PLUMBING WORKS

3 SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING) 1,41,447.75 25,33,664.00 26,75,111.75

4 SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES) 19,68,345.24 16,92,018.03 36,60,363.27

6 SUB HEAD - V - (SEWERAGE AND DRAINAGE) 8,99,878.88 1,26,941.00 10,26,819.88

7 SUB HEAD - VI - EXTERNAL WATER SUPPLY 2,67,635.35 1,80,438.00 4,48,073.35

[C] WTP & BOREWELL

8 SUB HEAD - I - WATER SUPPLY, DRAINAGE, PUMPS & EQUIPMENT 20,75,623.00 20,75,623.00

9 SUB HEAD - II - PLUMBING PANEL 34,012.00 1,09,019.00 1,43,031.00

10 SUB HEAD - III- TUBEWELLS WITH SUBMERSIBLE PUMP 2,37,118.70 4,05,874.00 6,42,992.70

[D] RAIN WATER HARVESTING

11 SUBHEAD-I- MODULAR RAIN WATER HARVESTING PIT 1,33,400.53 8,22,799.18 9,56,199.71

12 SECTION - 1 - SEWAGE TREATMENT PLANT 14,54,504.00 14,54,504.00

Signature of Bidder 1 Signature

Digitally signed of

GAURAV RAVINDRA GAIKWAD

RAVINDRA Date: 2022.02.04 14:56:11

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Proposed Office Building for The Fertilizer Corporation of India Limited (FCIL) at sector 1, Noida, Uttar Pradesh

ABSTRACT OF COST

DSR -2018 NON-DSR TOTAL

S.NO DESCRIPTION AMOUNT AMOUNT AMOUNT

[F] INTERNAL & EXTERNAL ELECTRICAL WORKS

13 INTERNAL ELECTRICAL WORKS 1,10,40,274.00 55,81,470.00 1,66,21,744.00

15 SOLAR SYSTEM WORKS 16,22,880.00 16,22,880.00

17 CAR STACK PARKING 66,67,133.00 66,67,133.00

[G] FIRE FIGHTING WORKS

18 SUB HEAD - I (WET RISER SYSTEM - PUMPING EQUIPMENTS) 59,778.00 22,87,897.00 23,47,675.00

19 SUB HEAD - II - (PIPING, VALVES AND ACCESSORIES) 59,26,639.00 1,83,922.00 61,10,561.00

20 SUB HEAD - III - (HYDRANTS SYSTEM) 23,54,939.50 23,54,939.50

21 SUB HEAD - IV - (FIRE EXTINGUISHERS) 3,61,028.00 91,074.00 4,52,102.00

[H] FIRE ALARM & PUBLIC ADDRESS 74,91,500.00 2,09,460.00 77,00,960.00

Signature of Bidder 2 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Proposed Office Building for The Fertilizer Corporation of India Limited (FCIL) at sector 1, Noida, Uttar Pradesh

ABSTRACT OF COST

DSR -2018 NON-DSR TOTAL

S.NO DESCRIPTION AMOUNT AMOUNT AMOUNT

25 Subhead-I: Data & Telephone Network 28,35,302.00 28,35,302.00

26 Subhead-II: EPABX System 10,85,114.00 10,85,114.00

27 Subhead-III: Video Surveillance System(IP CCTV) 18,21,756.00 18,21,756.00

28 Subhead-IV: ACCESS CONTROL SYSTEM 4,63,897.00 4,63,897.00

29 Subhead-V: Boom Barrier 3,80,426.00 3,80,426.00

30 Subhead-VI: Audio-Visual System in Meeting Room (16 Seater) 27,10,503.00 27,10,503.00

[K] BUILDING MANAGEMENT SYSTEM

31 SUBHEAD-I: BUIDING MANAGEMENT SYSTEM 51,79,702.00 51,79,702.00

[L] EXTERNAL DEVELOPMENT WORKS

[M] MAINTENANCE OFFICE

37 MAINTENANCE OFFICE 10,00,000.00 10,00,000.00

(N) DSR Rate with indicies 2,19,90,847.78

Signature of Bidder 3 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Proposed Office Building for The Fertilizer Corporation of India Limited (FCIL) at sector 1, Noida, Uttar Pradesh

ABSTRACT OF COST

DSR -2018 NON-DSR TOTAL

S.NO DESCRIPTION AMOUNT AMOUNT AMOUNT

Estimated cost put to tender 33,12,85,471.98 20,10,81,458.28 53,23,66,930.26

GRAND TOTAL COST OF PROJECT 53,23,66,930.26

GRAND TOTAL COST OF PROJECT 53,23,66,930.26

Signature of Bidder 4 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Proposed Office Building for The Fertilizer Corporation of India Limited (FCIL) at sector 1, Noida, Uttar Pradesh

SUMMARY OF COST FOR CIVIL WORK

S.NO NAME OF SUB-HEAD AMOUNT (in Rs.)

DSR-2018 NON-DSR

A EARTH WORK 1,19,85,171.35

B PLAIN CONCRETE WORKS 42,85,427.20

C REINFORCED CEMENT CONCRETE WORK 14,59,56,789.36

D BRICK WORK 88,27,619.90

E CLADDING WORK 40,04,237.55

F WOOD WORK 8,20,746.95

G STEEL WORK 4,65,359.55

H FLOORING 1,76,53,732.95

I ROOFING 99,85,496.22

J FINISHING 1,14,17,855.52

K ALUMIINIUM WORK 11,79,594.40

L WATER PROOFING 28,17,475.21

M STRUCTURE GLAZING WORK 1,99,42,477.75

K NON-SCHEDULE ITEMS 9,28,08,710.07

GRAND TOTAL CIVIL WORKS 33,21,50,693.98

GRAND TOTAL CIVIL WORKS 33,21,50,693.98

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

1 2.6 width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

2.6.1 All kinds of soil Cum 378.00 181.85 68,739.30

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and

watering of the earth in layers not exceeding 20 cm in trenches, plinth,

sides of foundation etc. complete.

Signature of Bidder 5 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Carriage of material including earth or sand etc. by mechanical transport

3 1.1.2 including loading , unloading and stacking

A Beyond 5 km upto 10 km Per kM 2,665.00 15.20 40,508.00

B beyond 10 kM upto 20 KM Per km 2,665.00 12.63 33,658.95

Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

4 2.25 each deposited layer by ramming and watering, for all lead and lift upto Cum 378.00 219.65 83,027.70

Extra for every additional lift of 1.5 m or part thereof in excavation

/banking excavated or stacked materials.

2.26.1 All kinds of soil

Supplying chemical emulsion in sealed containers including delivery as

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 45.00 200.85 9,038.25

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-

termite treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emul sion @ one

litre per hole, 300 mm apart including drilling 12 mm diameter holes and

2.35.3 plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match

the existing floor:

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 2,219.00 227.05 5,03,823.95

4 CONCRETE WORKS

Signature of Bidder 6 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying in position cement concrete of specified grade

8 4.1 excluding the cost of centering and shuttering - All work up to plinth level

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40

mm nominal size)

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,

9 4.2 abutments, pillars, posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,

sunken floor etc., up to floor five level, excluding the cost of centering,

shuttering and finishing:

1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20

mm nominal size)

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement

: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal

10 4.17 size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well Sqm 132.00 614.05 81,054.60

rammed and consolidated and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top smooth

Extra for concrete work in superstructure above floor V level for each four

floors or part thereof.

5 REINFORCED CEMENT CONCRETE WORK

Extra for additional height in centering, shuttering where ever required

with adequate bracing, propping etc., including cost of de-shuttering and

12 5.11 decentering at all levels, over a height of 3.5 m, for every additional

height of 1 metre or part thereof (Plan area to be measured).

Suspended floors, roofs, landing, beams and balconies (Plan area to be

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 3,84,577.00 83.50 3,21,12,179.50

Signature of Bidder 7 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 3,48,019.00 83.50 2,90,59,586.50

Add for plaster drip course/ groove in plastered surface or moulding to

R.C.C. projections.

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

16 5.33 recommended proportions as per IS: 9103 to accelerate, retard setting of

concrete, improve workability without impairing strength and durability as

per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/

less cement used as per design mix is payable/recoverable separately).

5.33.1 All works upto plinth level Cum 10.00 7,997.30 79,973.00

5.33.2 All works Above plinth level Cum 10.00 9,400.85 94,008.50

Providing and laying in position ready mixed M-25 grade concrete for

reinforced cement concrete work, using cement content as per approved

design mix, manufactured in fully automatic batching plant and

transported to site of work in transit mixer for all leads, having continuous

agitated mixer, manufactured as per mix design of specified grade for

17 5.37 reinforced cement concrete work, including pumping of R.M.C. from

transit mixer to site of laying , excluding the cost of centering, shuttering

finishing and reinforcement, including cost of admixtures in recommended

proportions as per IS : 9103 to accelerate/ retard setting of concrete,

improve workability without impairing strength and durability as per

direction of the Engineer-in-charge.

5.37.1 All works upto plinth level Cum 4,066.00 8,398.65 3,41,48,910.90

5.37.2 All works Above plinth level Cum 2,863.00 9,802.20 2,80,63,698.60

Signature of Bidder 8 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Extra for providing richer mixes at all floor levels.

Note:- Excess/less cement over the specified cement content used is

payable /recoverable separately.

Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. (Note:-

5.34.1 Cement content considered in M-30 is @ 340 kg/cum) Cum 3,633.00 69.75 2,53,401.75

Providing M-35 grade concrete instead of M-25 grade BMC/ RMC. (Note :

5.34.2 Cement content considered in M-35 is @ 350 kg/ cum) Cum 501.00 139.45 69,864.45

Providing M-40 grade concrete instead of M-25 grade BMC/ RMC.(Note :

5.34.3 Cement content considered in M-40 is @ 360 kg/ cum) Cum 914.00 209.20 1,91,208.80

Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four

floors or part thereof.

Centering and shuttering including strutting, propping etc. and removal of

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 562.00 284.85 1,60,085.70

Walls (any thickness) including attached pilasters, butteresses,

plinth and string courses etc.

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 10,433.00 693.05 72,30,590.65

Lintels, beams, plinth beams, girders, bressumers and

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 5,914.00 733.70 43,39,101.80

5.9.7 Stairs, (excluding landings) except spiral-staircases Sqm 307.00 622.35 1,91,061.45

5.9.4 Shelves (Cast in situ) Sqm 33.00 693.05 22,870.65

Small lintels not exceeding 1.5 m clear span, moulding as in cornices,

5.9.18 window sills, string courses, bands, copings, bed plates, anchor blocks and Sqm 56.00 284.85 15,951.60

5.9.16 Edges of slabs and breaks in floors and walls

5.9.19 Weather shade, Chajjas, corbels etc., including edges Sqm 10.00 766.75 7,667.50

Signature of Bidder 9 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing parallel threaded couplers conforming to IS code on

“Reinforcement Couplers for Mechanical Splices of Bars for Concrete

21 5.42 Reinforcement - Specification”, to reinforcement bars including threading,

enlargement at connection by forging, protecting the prepared

reinforcement bars and related operations as required to complete the

works per direction of Engineer- in-Charge.

5.42.2 Coupler for 20 mm diameter reinforcement bar Nos 200.00 135.30 27,060.00

6 MASONARY WORK:

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 376.00 6,157.45 23,15,201.20

Brick work with common burnt clay F.P.S. (non modular) bricks of class

23 6.4 designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 95.00 7,590.45 7,21,092.75

Extra for brick work / AAC block masonry / Tile brick masonry in

superstructure above floor V level, for each four floors or part thereof by

mechanical means.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

25 6.13 class designation 7.5 in superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 876.00 932.10 8,16,519.60

Extra for half brick masonry in superstructure, above floor V level for

every four floors or part thereof by mechanical means.

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at

27 6.15 every third course of half brick masonry. sqm 500.00 80.10 40,050.00

Signature of Bidder 10 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying autoclaved aerated cement blocks masonry with 100

mm thick AAC blocks in super structure above plinth level up to floor V

28 6.38 level in cement mortar 1:4 (1 cement : 4 coarse sand ). The rate includes cum 35.00 8,227.35 2,87,957.25

providing and placing in position 2 Nos 6 mm dia M.S. bars at every third

course of masonry work.

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above plinth

29 6.47 level up to floor V level with RCC band at sill level and lintel level cum 688.00 6,636.95 45,66,221.60

with approved block laying polymer modified adhesive mortar all complete

as per direction of Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for seperately).

8 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

30 8.2 approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at

Area of slab over 0.50 sqm - Steel Grey Granite - Polished or

Extra for fixing marble /granite stone, over and above corresponding basic

31 8.4 item, in facia and drops of width upto 150 mm with epoxy resin based MTR 66.00 434.25 28,660.50

adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/

kitchen sink in kitchen platform, vanity counter and similar location in

32 8.5 marble/ Granite/ stone work, including necessary holes for pillar taps etc. Each 51.00 734.55 37,462.05

including moulding, rubbing and polishing of cut edges etc. complete.

Signature of Bidder 11 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing stone slab with table rubbed, edges rounded and

polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions

by cutting a chase of appropriate width with chase cutter and embedding

33 8.10 the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

as per direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade Sqm 10.00 3,216.90 32,169.00

Providing and fixing stainless steel cramps of required size and shape for

anchoring stone wall lining to the backing or securing adjacent stones in

34 8.15 stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), Kg 347.00 612.60 2,12,572.20

including making the necessary chases in stone and holes in walls

wherever required.

Providing and fixing adjustable stainless steel cramps of approved quality,

required shape and size, adjustable with stainless steel nuts, bolts and

35 8.22 washer (total weight not less than 260 gms), for dry stone cladding fixed each 3,271.00 327.00 10,69,617.00

on frame work at suitable location, including making necessary recesses in

stone slab, drilling required holes etc complete as per direction of the

Engineer-in-charge.

Signature of Bidder 12 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing structural steel frame (for dry cladding with 30 mm

thick gang saw cut with machine cut edges sand stone) on walls at all

heights using M.S. square/ rectangular tube in the required pattern as per

architectural drawing, including cost of cutting, bending, welding etc. The

frame work shall be fixed to the wall with the help of M.S. brackets/ lugs

of angle iron/ flats etc. which shall be welded to the frame and embedded

in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand

:4 graded stone aggregate 20 mm nominal size) of size 300x230x300

mm, including cost of necessary centring and shuttering and with

36 8.21 approved expansion hold fasteners on CC/RCC surface, including drilling Kg 9,690.00 183.35 17,76,661.50

necessary holes. Approved cramps/ pins etc. shall be welded to the frame

work to support stone cladding, the steel work will be given a priming coat

of Zinc primer as approved by Engineer in-charge and painted with two

or more coats of epoxy paint (Shop drawings shall be submitted by the

contractor to the Engineer-in-charge for approval before execution). The

frame work shall be fixed in true horizontal & vertical lines/planes. (Only

structural steel frame work shall be measured for the purpose of payment,

stainless steel cramps shall be paid for separately and nothing extra shall

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as

37 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, Sqm 511.00 1,030.30 5,26,483.30

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

9 WOOD & PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

9.1.1 Second Class teak wood Cum 2.00 1,30,183.05 2,60,366.10

Signature of Bidder 13 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

39 9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

40 9.23 minimum depth on all edges of flush door shutters (over all area of door Sqm. 87.00 401.40 34,921.80

shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame

with 10 mm diameter bolts, nuts and wooden plugs and embedding in

42 9.53 cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand each 856.00 179.20 1,53,395.20

: 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

Providing and fixing bright finished brass handles with necessary screws

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

46 9.84 embossed on the body, door weight upto 36 kg to 80 kg and door width each 34.00 851.60 28,954.40

from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete

Signature of Bidder 14 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming to

IS : 2046 Type S, including cost of adhesive of approved quality

Providing and fixing carbon steel galvanised ( minimum coating 5 micron)

dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480

48 10.27 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame , concrete/ masonry, etc.

as per direction of Engineer-in-charge.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and corners,

all necessary fittings complete, including applying a priming coat of

approved steel primer.

Using M.S. angles 40x40x6 mm for diagonal braces - For Plumbing

& HVAC Shaft door

11 FLOORING WORK

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate) finished with a floating coat of neat cement, including

cement slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sqm 863.00 498.35 4,30,076.05

51 11.24 Extra for pre finished nosing to treads of steps of marble stone. MTR 747.00 530.25 3,96,096.75

Extra for marble stone flooring in treads of steps and risers using single

length up to 2.00 metre.

Signature of Bidder 15 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Kota stone slab flooring over 20 mm (average) thick base laid over and

jointed with grey cement slurry mixed with pigment to match the shade of

the slab, including rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3

54 11.27 coarse sand) and jointed with grey cement slurry mixed with pigment to Sqm 141.00 1,810.05 2,55,217.05

match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS

: 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bottle green, black of any

55 11.37A size as approved by Engineer-in-Charge in skirting, risers of steps and Sqm 87.00 927.90 80,727.30

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades,

56 11.41 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the

joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Signature of Bidder 16 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying Vitrified tiles in different sizes (thickness to be

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

57 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joint with white cement & matching pigments etc.

All Tiles ( Wall & Floor) shall be laid with Spacer of 3-5 mm and fillied with

matching groute as per the discreation of the consultant.

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

58 11.56 over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing

, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

Polished Granite stone slab P. White , Crystal gold or equivalent.

Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be laid and

finished with screed board vibrator , vacuum dewatering process and

finally finished by floating, brooming with wire brush etc. complete as per

59 16.75 specifications and directions of Engineer-incharge. (The panel shuttering Cum 403.00 8,663.05 34,91,209.15

work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330 kg/cum.

Excess/less cement used as per design mix is payable/ recoverable

60 5.26 Providing and filling in position, blown bitumen in expansion joints. Cum 1.00 61,509.80 61,509.80

Signature of Bidder 17 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 stone aggregate 10 mm and down gauge), including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

12.21. In 75x75mm deep chase

Note - For All Type of False Celing

Note : i) Rate to be included for all kinds of profiles and cut outs

required for light fixtures, Speakers, Smoke detector, trap doors

and AC grill in the ceiling. Provision

for light fittings, AC grills and diffusers have to be made at no

extra cost supported with tees, Angles, etc. suitably fixed all

complete as per drawing and direction. The area of these cutouts

which is less than 0.5 sqmt for one unit will not be deducted while

measuring the ceiling area. ii) The contractor must co-ordinate

with electrical & AC contractor for working out various levels for

the false ceiling & make the marking on the walls / columns

before starting the false ceiling work.

Signature of Bidder 18 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with intermediate G.I.

hannels 45x15x0.9 mm running at the spacing of 1200 mm centre to

centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x

62 12.45 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered and square

edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer suitable for board, all as per

manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, Trapdoor , cutouts made with

frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the

cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-

(Part I) : 2011 (Board with BIS certification marks)

Signature of Bidder 19 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should

have Humidity Resistance (RH) of 99%, Light Reflectance > 85%,

Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per

(BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid

of hot dipped all round galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T runners of 15x32 mm of

63 26.27 length 3000 mm, cross T of size 15x32mm of length 1200 mm and

secondary intermediate cross T of size 15x32 mm of length 600 mm to

form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer

diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up

to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,

spaced at 1200 mm centre to centre along main ‘T’.

The system should rest on periphery walls /partitions with the help of GI

perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick

sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm

centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom

portion of all T-sections used in false ceiling support system shall be pre-

painted with polyester baked paint, for all heights. The work shall be

carried out as per specifications, drawings and as per directions of the

engineer-in charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55

Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a

height of 5 m above floor level, over first class kail wood strips 25x6 mm

with 10 mm gap in between and reinforced with rabbit wire mesh fixed to

wooden frame (frame work to be paid separately):

Signature of Bidder 20 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing tiled false ceiling of specified materials of size

595x595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and

cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet,

1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 mm and secondary cross "T" of length 600 mm

and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form grids of 600x600

mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making, opening

for services like diffusers, grills, light fittings, fixtures, smoke detectors

etc. Main "T" runners to be suspended from ceiling using GI slotted cleats

of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50

mm long dash fasteners, 4 mm GI adjustable rods with galvanised

butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to

center along main T, bottom exposed width of 24 mm of all T-sections

shall be pre-painted with polyester paint, all complete for all heights as

per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size

595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet

12.52.1 having galvanizing of 100 gms/sqm (both sides inclusive) and electro sqm 269.00 1,504.45 4,04,697.05

statically polyester powder coated of thickness 60 microns (minimum),

including factory painted after bending.

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and

initial emittance > 0.75on waterproof and sloped surface of terrace, laid

on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4

66 12.55 coarse sand) and grouting the joints with mix of white cement & marble Sqm 1,718.00 1,374.10 23,60,703.80

powder in ratio of 1:1, including rubbing and polishing of the surface upto

3 cuts complete, including providing skirting upto 150 mm height along

the parapet walls in the same manner.

Signature of Bidder 21 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool

conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped

67 12.57 in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & Sqm 476.00 316.40 1,50,606.40

washers and held in position by criss crossing GI wire etc. complete as per

directions of Engineer-in-Charge.

Making khurras 45x45 cm with average minimum thickness of 5 cm

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

68 12.22 aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 No. 6.00 244.05 1,464.30

micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse

sand) and a coat of neat cement, rounding the edges and making and

finishing the outlet complete.

13 FINISHING WORK

69 13.4 12 mm cement plaster of mix :

15 mm cement plaster on rough side of single or half brick wall of mix:

71 13.16 6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

Extra for plastering exterior walls of height more than 10 m from ground

level for every additional height of 3 m or part thereof.

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete.

74 13.37 White washing with lime to give an even shade :

New work (three or more coats)

Signature of Bidder 22 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :

New work (two or more coats) over and including water thinnable priming

coat with cement primer

76 13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm)

13.45.1 over and including priming coat of exterior primer applied Sqm 874.00 232.00 2,02,768.00

@ 2.20kg/10 sqm

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work Sqm 3,504.00 128.65 4,50,789.60

Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade :

13.61.1 Two or more coats on new work Sqm 594.00 121.55 72,200.70

Providing and applying white cement based putty of average thickness 1

79 13.80 mm, of approved brand and manufacturer, over the plastered wall surface Sqm 874.00 115.15 1,00,641.10

to prepare the surface even and smooth complete.

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone

work by providing weather silicon sealant over backer rod of approved

quality as per architectural drawings and direction of Engineer-in-charge

21.8.1 Upto 5mm depth and 5 mm width Metre 2,924.00 79.45 2,32,311.80

Providing and fixing 12 mm thick frameless toughened glass door shutter

of approved brand and manufacture, including providing and fixing top &

81 21.18 bottom pivot & double action hydraulic floor spring type fixing SQM 194.00 4,447.90 8,62,892.60

arrangement and making necessary holes etc. for fixing required door

fittings, all complete as per direction of Engineer-in charge (Door handle,

lock and stopper etc.to be paid separately).

Signature of Bidder 23 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0

82 21.12 mm thick & 2100 mm long with SS screws etc .complete as per direction

of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium tubular handle

22 WATER PROOFING WORK:

Providing and laying water proofing treatment in sunken portion of WCs,

bathroom etc., by applying cement slurry mixed with water proofing

cement compound consisting of applying :

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water

proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to

air cure for 4 hours.

83 22.5 (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water Sqm 400.00 465.60 1,86,240.00

proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to

air cure for 4 hours followed with water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all

joints, corners, junctions of pipes and masonry with polymer mixed

Signature of Bidder 24 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with water proofing compound conforming to IS. 2645 and

approved by Engineer-in-charge over the RCC slab including adjoining

walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge to

required slope and treating similarly the adjoining walls upto 300 mm

84 22.7 height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge including

laying glass fibre cloth of approved quality in top layer of plaster and

finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All above

operations to be done in order and as directed and specified by the

Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as

Signature of Bidder 25 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1

(4.5 parts crystalline mortar : 1 part water) for the treatment of faulty

construction joints, cracks, tie rod holes and spalled & honeycombed

surface of RCC underground structures like basement,

85 22.25 water tanks, bridge deck etc. to ensure water tightness. The crystallie

mortar shall conform to the EN 1504-3 having compressive strength Class

R4 > 45 MPa and adhesive bond strength Class R3 > 1.5 MPa. The work

shall be carried out all complete as per specification and the direction of

the Engineer-In-Charge. The product performance

shall carry guarantee for 10 years against any leakage.

For sealing cracks and faulty construction joints, routed out/making U-

shape groove size 25x25mm and then primed the area with integral

crystalline slurry @0.05kg/ running metre and while the surface is tacky

22.25.1 filled the groove upto surface with crystalline mortar @1.50kg/ running RM 434.87 525.70 2,28,612.21

metre. Once crystalline mortar is touch dry then finally applied two coats

of integral crystalline slurry @0.05kg/running metre per coat.

STRUCTURAL GLAZING AND ALUMINIUM COMPOSITE PANEL

STRUCTURAL GLAZING

Providing and supplying aluminium extruded tubular and other

aluminium sections as per the architectural drawings and approved

shop drawings , the aluminium quality as per grade 6063 T5 or T6 as

86 25.1 per BS74,including super durable powder coating of 60-80 microns Kg 18,386.00 370.45 68,11,093.70

conforming to AAMA 2604 of required colour and shade as approved

by the Engineer-in-Charge. (The item includes cost of material such

as cleats, sleeves, screws etc. necessary for fabrication of extruded

aluminium frame work. Nothing extra shall be paid on this account).

Signature of Bidder 26 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Designing, fabricating, testing, protection, installing and fixing of

glass in position semi (grid) unitized system for linear as well as

curvilinear portions of the building for all heights and all levels,

a) Structural analysis & design and preparation of shop drawings for the

specified design loads conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind pressure without any

failure), including functional design of the aluminum sections for

fixing glazing panels of various thicknesses, aluminium cleats, sleeves and

splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc.,

structural and weather silicone sealants, flashings, fire stop (barrier)-cum-

87 25.2 smoke seals, microwave cured EPDM gaskets for water tightness, pressure

equalisation & drainage and protection against fire hazard including:

b) Fabricating and supplying serrated M.S. hot dip galvanised

/Aluminium alloy of 6005 T5 brackets of required sizes, sections and

profiles etc. to accommodate 3 Dimensional movement for achieving

perfect verticality and fixing structural glazing system rigidly to

the RCC/ masonry/structural steel framework of building structure using

stainless steel anchor fasteners/ bolts,

nylon separator to prevent bimetallic contacts with nuts and washers etc.

of stainless steel grade 316, of the required capacity and in required

Signature of Bidder 27 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

c) Providing and filling, two part pump filled, structural silicone

sealant and one part weather silicone sealant compatible with the

structural silicone sealant of required bite size in a clean and controlled

factory / work shop environment , including double sided spacer tape,

setting blocks and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design, within and all

around the perimeter for holding glass.

d) Providing and fixing in position flashings of solid aluminium sheet 1 mm

thick and of sizes, shapes and profiles, as required as per the site

conditions, to seal the gap between the building structure and all its

interfaces with curtain glazing to make it watertight.

e) Making provision for drainage of moisture/ water that enters the

curtain glazing system to make it watertight, by incorporating principles

of pressure equalization, providing suitable gutter profiles at bottom (if

required), making necessary holes of required sizes and of required

numbers etc. complete. This item includes cost of all inputs of designing,

labour for fabricating

and installation of aluminium grid, installation of glazed units, T&P,

scaffolding and other

Extra for openable side / top hung vision glass panels (IGUs) including

providing and supplying at site all accessories and hardwares for the

openable panels as specified and of the approved make such as heavy

duty stainless steel friction hinges, min 4 -point cremone locking sets with

88 25.4 stainless steel plates, handles, buffers etc. including necessary stainless Sqm 214.00 3,163.10 6,76,903.40

steel screws/ fasteners, nuts, bolts, washers etc. all complete as per

the Architectural drawings, as per the approved shop drawings, as

specified and as directed by the Engineer in- Charge.

Signature of Bidder 28 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing, fabricating and supplying shadow box of required size and

shape, for fixing in the spandrel portion of the structural glazing, in linear

as well as curvilinear portions of the building by providing semi -rigid,

inorganic, non-combustible fibre glass wool insulation 50 mm thick,

conforming to IS: 8183 and BS: 3958 Part 5. The insulation layer shall

89 25.5 have facing (factory bonded on surface # 1 of the fibre glass insulation Sqm 1,813.00 1,883.55 34,14,876.15

layer), of black non-woven fibre glass tissue of nominal thickness 0.5 mm

and nominal mass not less than 60 gm /sqm, made of randomly oriented

glass fibres distributed in a binder by a wet-lay process including fixing

1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement

board including SS rivets, nuts, bolts, washers etc complete.

TOTAL DSR ITEM i 23,93,41,983.91

90 23 N.S items

NS 1 SOIL RETENTION SYSTEM WITH CONTIGEOUS PILE

Contigeous Piles, Shot Concreting, HDPE Membrane Waterproofing & 100

mm RCC Skin wall

Step 1 Contigeous Pile Sqm 2,159.00 15,300.00 3,30,32,700

Design and build shoring system for stabilization of basement ,

stabilization with Contiguous Bored piling & Anchoring and stabilization

technique as mentioned below :

Design of Contigeous bored Piling shoring system & Approval from reputed

engineering Insitute.

Boring 600 mm dia Piles/as per design closely placed w.r.t soil conditions

designed depth with TMR machine as per design.

Supply, bending, binding & placing in position reinforcement steel as per

approved drawing including cost of all T & P, binding wire etc.

Supply and placing of concrete with tremie pipe of specified grade of

M30/As per Design.

Signature of Bidder 29 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Construction of pile cap beam including cost of centering shuttering, steel

e binding and casting with M30 grade concrete including cost of all materials

complete as per design.

Providing and installation of 50 MT inclined post tensioned anchor @ 3.0

m c/c spacing/ As per Design

g Cutting, fabrication, hoisting and erection of waler beam as per design.

Shotcrete the Pile facia in one layer to give vertical levelled surface ( min

25 mm thick on the pile and 75 mm thick between the piles)using (1

cement: 1.5 coarse sand: 3 pea sizes i.e., 6 mm downsize coarse

aggregates) including cost of cement, wire mesh, aggregate, Machine tool

and other additives for the work etc including all shuttering scafolding etc

as required upto the desired level of finish.

HDPE Waterproofing on Shot crete Wall & Under Raft Foundation

Membrane Waterproofing System

Basement Waterproofing System

Waterproofing under the Raft & Outside the Retaining wall

(Confined Areas)

Signature of Bidder 30 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Supplying and applying waterproofing of raft, footings etc. using Pre

Applied, pressure sensitive HDPE membrane as per specifications listed

below with guarantee period of 10 years: urface preparation: Horizontal

Surfaces - The substrate must be free of loose aggregate, slush, mud, sharp

protrusions and stagnated water. Ground water level needs to be kept

under the PCC level, continues dewatering to be done till completion of

concreting . The surface does not need to be dry, but standing water must

be removed. Vertical Surfaces - Use plum concrete/plywood for facing to

sheet piling to provide support to the membrane. HDPE membrane-

Supplying and installing 1.2 mm thick self adhesive HDPE membrane for

Base RCC slab/ basement raft conforming to BS 8102, IS 16471 Type I

standard for below ground structures, having puncture resistance of

around 1000 N (as per ASTM E 154) and hydrostatic head resistance around

60 m head (ASTM D 5385), tensile strength of around 25 Mpa (ASTM D

412), & elongation of around 500% (ASTM D 412), peel adhesion to

concrete of around 880 N/m (As per ASTM D 903 modified). The membrane

should be comprising of a min HDPE layer of 0.8 mm and a pressure

sensitive adhesive layer which is covered by a weather proof protective and

trafficable granular layer of sand or other equivalent material to protect

self adhesive polymer layer.

Signature of Bidder 31 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Horizontal application: Place the membrane HDPE film side to the substrate

with adhesive facing towards the concrete pour. End laps should be

staggered to avoid a build-up of layers. Leave the membrane loosely laid, in

position until overlap procedure is completed. Accurately position

succeeding sheets to overlap the previous sheet 75 mm along the marked

selvedge and edges shall be sealed. Ensure the underside of the succeeding

sheet is clean, dry and free from contamination before attempting to

overlap. At the end of each role, the grains should be removed by using

hot air shovel gun & the joint between two sheets should be sealed with

the help of approved tape having approx. 100mm width.

RETAINING WALL WATERPROOFING TREATMENT (

Retaining Wall (The Membrane shall be used in Confined condition,

CONFINED RETAINING WALL WATERPROOFING

Over the secant piling surface providing and applying

shotcreting/brickwall/plywood which will act as a sacrificial layer and give

a smooth surface for the HDPE membrane which will be fixed

temporarily.The HDPE membrane will be nailed in the surface at the edges

and then it will be covered by double side tape before overlapping the

other membrane. The HDPE membrane shall be also spot bonded with

double sided tape at intervals on the vertical surface.

Signature of Bidder 32 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

HDPE membrane-Supplying and installing 1.2 mm thick self adhesive

HDPE membrane for Base RCC slab/ basement raft conforming to BS

8102, IS 16471 Type I standard for below ground structures, having

puncture resistance of around 1000 N (as per ASTM E 154) and

hydrostatic head resistance not less than 60 m head (ASTM D 5385),

tensile strength of aorund 25 Mpa (ASTM D 412), & elongation of min

500% (ASTM D 412), peel adhesion to concrete of approx. 880 N/m (As

per ASTM D 903 modified). The membrane should be comprising of a min

HDPE layer of 0.8 mm and a pressure sensitive adhesive layer which is

covered by a weather proof protective and trafficable granular layer of

sand or equivalent to protect self adhesive polymer layer.

Placing of concrete and reinforcement for retaining wall: The

reinforcement steel should be placed between the HDPE membrane & the

single side shuttering and then concrete should be poured as per mix

Step 4 100mm Thk RCC skin wall cast in situ

Providing and laying in position ready mixed M-25 grade concrete for

reinforced cement concrete work and cement content as per approved

design mix, and manufactured in fully automatic batching plant and

transported to site of work in transit mixer for all leads, having continuous

agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work, including pumping of R.M.C. from transit

mixer to site of laying, excluding the cost of centering, shuttering, finishing

5.40 and reinforcement, including cost of admixtures in recommended

proportions as per IS : 9103 to accelerate / retard setting of concrete,

improve workability without impairing strength and durability as per

direction of the Engineer - in - charge.

NOTE- (1) Cement content considered in this item is @ 330 kg/cum. Excess/

less cement used as per design mix is payable/ recoverable separately.

5.40.1 All works upto plinth level Cum 205.00 8,398.65 17,21,723.25

Signature of Bidder 33 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 14,345.00 83.50 11,97,807.50

Centering and shuttering including strutting, propping etc. and removal of

Walls (any thickness) including attached pilasters, butteresses,

plinth and string courses etc.

Rebar with approved Hilti chemical including all labour, tools, plants etc at

all levels and for all elements

Granite work gang saw cut (polished and machine cut) of thickness 18

mm for wall lining (veneer work), backing filled with a grout of average 12

mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including

91 NS.4 pointing with white cement mortar 1:2 (1 white cement : 2 marble dust)

with an admixture of pigment to match the marble shade (To be secured

to the backing by means of cramps, which shall be paid for separately)

Lift Lobbies, Ground Floor Lobbies - Fox Brown Granite, R. Black or

equivalent in Leather Finish

Behind Ground Floor Reception Lobby - Nero Granite Stone with

CNC Work finish

Signature of Bidder 34 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing dry cladding with 25 mm thick Granite stone (Steel

Grey - Shot Blasted) with (machine cut edges) of uniform colour and

size upto 1mx1m & Finish as specifed in drawings, fixed to structural steel

frame work and/ or with the help of cramps, pins etc. and sealing the

92 NS.5 joints with approved weather sealant as per Architectural drawing Sqm 981.90 4,304.00 42,26,097.60

and direction of Engineer-in-charge. (The steel frame work, stainless steel

and pins etc. shall be paid for separately).

Providing and fixing of 9mm thk Eco Board acoustic panel of approved

make and color to be fixed with necessary adhesives on existing partition

/ wall surfaces as per details provided in the drawings fixed over 12mm

thick approved BWP marine ply backing as per details. Wooden level

adjusters shall be used in case of any imperfections in the wall surface.

Quoted rates shall include all operations as specified above at all heights

and levels, making openings / cutouts for Electrical fixtures, HVAC etc

93 NS.6 including all tools and hardware all complete as per drawings and as sqm 209.70 3,347.00 7,01,865.90

directed by the Engineer.

Composition : 100% PET (60% Recycled) with adhesive backing

Category : Panels

Dimensions : 1220x2440mm (+/-2mm)

Thickness : 9mm (+/-7%)

Sound Absorption : 0.70 NRC (No Air Gap)

Providing Anti skid Grooves of size 3mmx3mm in granite stone at

94 NS.7 locations as indicated in the drawing all complete at all heights and levels Metre 1,744.40 23.00 40,121.20

Providing and laying 8mm thick Laminated wooden flooring AC-4 grade of

approved make, colour, shade and patterns in approved plank sizes. Rates

shall be inclusive of all types of profiles, skirting, 2-3mm thick approved

95 NS.8 underlay material as per manufacturers recommendatons, all operations Sqm 724.92 2,549.00 18,47,821.08

as listed above at all heights and levels all complete as per drawings and

as directed by the Engineer-in-charge.

Signature of Bidder 35 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 25 mm thick stone slab

over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

96 NS.9 coarse sand) laid and jointed with cement slurry and pointing with white Sqm 784.80 3,244.00 25,45,891.20

cement slurry admixed with pigment of matching shade including rubbing

, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

Polished Granite stone slab

Lobby Flooring -Brown Pearl or equivalent.

Signature of Bidder 36 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Ground Floor Double Ht External False Celing

300 C - Aluminium Plain Ceiling for use in Exterior Application in WOOD

Supply & Installation of Green Pro Certified 300C Linear Panel Ceiling of

the Dimension of 300 mm wide x 30 mm deep x 0.7 mm thick with bevel

edge having panel length up to 6 meters coil coated on continuous paint

line, double baked and roll formed for higher strength and good roll

forming characteristics. The panel ends will be raised up to 29 mm. The

panels about each other with a narrow ‘W’ groove.

FOR INTERIOR Application Panel shall be clipped to a baked enamelled

aluminum carrier of 41.5 mm wide x 62 mm deep x 0.95 mm thick in

standard length of 5 meters, made of double of 300 mm closed at

distance 2.00 meters.

FOR EXTERIOR Application Panel carrier screwed directly on MS Tube

Section Frame as per the Hunter Douglas design Standard and in complete

as per specification, drawings and as directed by Architect / Engineering-

in-charge. The Avg. C/C Distance of the carrier will be 0.8 - 1 Mts.

The Linear Aluminum ceiling system should meet the required standards

for Green Pro certification and should qualify as green product as per Cll

green products and services council. The manufacturer should be ISO

9001:2015 Quality Management System Certifications compliant with in

house testing facility and should have their own manufacturing plant in

India. The coated coil is passed thru Six Hi configuration roller levelling

process to ensure the flatness of the coil. Metal ceiling Tested for Seismic

Zone V compliance as per IS 1893 part 1-2016.

Paint Finish : Aluminum panels shall be chromatised for maximum bond

between metal and paint enamel twice under high temperature, one side

with a full primer and finish coat, the other side (inner side) with a primer

coating and skin coat on a continuous paint line.

PANEL: Panels shall be cold rolled formed panels of 300 mm wide, 30 mm

deep and 0.7 mm thick with a5 mm beveled edge creating a 10 mm ‘V’

groove made from corrosion resistant Al- Mg Alloy AA300S’ The length of

each panel shall be 6000 mm the panels are recyclable, lightweight and

Signature of Bidder 37 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing Restroom Cubicles Systems comprising of the

MODLE TYPE - TITAN SS SERIES,

Thickness of Compact Laminate : 12 mm as per DRAWING,

Color of HPL Boards: Single Colour ,

Size of Cubicle : As per Drawing (W) X 1550mm (D) X 1980mm (H), Door

Size : 1765mm (H) X 610mm (W), Divider Seize: 1775mm (H),Overall

Height Of Cubicle : 1980 mm,(Including bottom Gap of 150mm),

98 NS.12 Accessories: Standard – Merino Make,Stainless Steel - 304 Grade Each 42.00 35,739.00 15,01,038.00

accessories),a) SS “U” Channel,b) SS "F" Channel (Only Corner Unit),c)

SS Top Rail,d) SS Coat Hook,e) SS Privacy Thumb turn c/w Occupancy

Indicator,f) SS Door Knob,g) SS Hinges with Cover,g) SS Hinges with

Cover,h) SS Adjustable Foot - 316 Grade,i) Rubber Lining for Groove,j)

S.S.Screws 304 G & P.V.C Wall Plugs,SPECIAL NOTE - Warpage Criteria is

3.0 mm/1000mm for MRS panels as per EN standard- 438 all complete as

per drawings and as per instructions of Engineering-in-charge

Providing and fixing fixed glass frameless partition with S/S patch fitting:

frameless partitions with 12 mm clear toughened glass of approved brand

and manufacturer with DORMA or approved equivalent Patch fittings / wall

connecting profiles such as top patch, bottom patch, central connector,

corner connector, side connector, glass to glass connector. The above

99 NS.13 work complete in all respect as per approved drawings and as per the SQM 319.00 4,507.00 14,37,733.00

directions of Engineer-incharge. Payment for glass door shall be made

under relevant subhead of the BoQ. The rates shall include the cost of

scaffolding, hardware, all tools, etc for working at all levels all complete

as per drawings and as per instructions of Engineering-in-charge

Providing and Fixing aluminium architectural feature with extruded

hollow tube (50X50X 3mm Thick) including galvanized MS insert of 2mm

thick in aluminium tube (Vertical) ,fixing with dash fasteners of required

100 NS.14 dia and size, including necessary filling up of gaps at junctions, as per Kg 1,829.00 945.00 17,28,405.00

the architectural and approved shop drawings with approved colour of

powder coating 60-70 micron .all complete as per drawings and as

directed by the Engineer-in-charge.

Signature of Bidder 38 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing, assembling and supplying Glazing system to be glazed with

double glazed unit of 6mm thick double silver coated Envision SKN 765

High performance toughened glass or equivalent on outside in blue shade

with tinted blue substrate + 12mm Air gap + 6mm thick toughened clear

Glass on inside of approved make with the assembled double glass units

(DGU) having properties as visible Light transmittance (VLT) 39 %, Light

reflection internal Max 10%, light reflection external Max 18 %, Solar

Heat Gain Coefficient (SHGC) Max 0.24 and Max.U value of 1.6 W/m2

degreeK etc. The glasses should be indigenous in make and should

confirm to European standards ( EN 1096, EN 1279, EN 12150, etc) for

manufacturing as well as coating. The performance values declared should

be third party tested. The thickness/ combination of the glass can vary as

per the architects/consultants suggestions after checking structural

stability of the finalized glass panel. silicone biteinsulated glass (double

glazed) vision panel units of size and shape as required and specified,

including primary seal and secondary seal (structural silicone sealant) etc.

all complete for the required performances, as per the Architectural

drawings, as per the approved shop drawings, as specified and as directed

by the Engineer-in-Charge. The IGUs shall be assembled in the factory/

workshop of the glass processor. (Payment for fixing of IGU Panels in the

curtain glazing is included in cost of item No. 25.2)For payment, only the

actual area of glass on face # 1 of the glass panels (excluding the areas of

the grooves and weather silicone sealant) provided and fixed in position,

shall be measured in sqm. The properties of performance glass shall be

decided by technical sanctioning authority as per the site requirement

Signature of Bidder 39 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Glazing System VS1

Providing, assembling and supplying VS 1 Glazing system to be glazed

with double glazed unit of 8mm thick single silver coated Cool lite

Planitherm Clear High performance toughened glass or equivalent on

outside in clear shade on clear substrate + 16mm Air gap + 8mm thick

toughened clear Glass on inside of approved make with the assembled

double glass units (DGU) having properties as visible Light transmittance

(VLT) 70 %, Light reflection internal Max 13%, light reflection external

Max 13 %, Solar Heat Gain Coefficient (SHGC) Max 0.56 and Max.U value

of 1.6 W/m2 degreeK etc. The glasses should be indigenous in make and

should confirm to European standards ( EN 1096, EN 1279, EN 12150,

etc) for manufacturing as well as coating. The performance values

declared should be third party tested. The thickness/ combination of the

glass can vary as per the architects/consultants suggestions after

checking structural stability of the finalized glass panel. Approved Make:

Saint Gobain, Pilklington, SeisicamFor payment, only the actual area of

glass on face # 1 of the glass panels (excluding the areas of the grooves

and weather silicone sealant) provided and fixed in position, shall be

measured in sqm. The properties of performance glass shall be decided by

technical sanctioning authority as per the site requirement

Signature of Bidder 40 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and supplying Spandrel Glass Panels to be glazed with Single

glazed unit of 6mm thick Antelio ST 767 High performance toughened

glass or equivalent in blue shade with tinted blue substrate having

properties as visible Light transmittance (VLT) 42 %, Light reflection

internal Max 20%, light reflection external Max 15 %, Solar Heat Gain

Coefficient (SHGC) Max 0.46 and Max.U value of 5.6 W/m2 degreeK etc.

The glasses should be indigenous in make and should confirm to European

standards ( EN 1096, EN 1279, EN 12150, etc) for manufacturing as well

as coating. The performance values declared should be third party tested.

The thickness/ combination of the glass can vary as per the

architects/consultants suggestions after checking structural stability of the

finalized glass panel. Approved Make: Saint Gobain, Pilklington,

Seisicam,all complete for the required performances as specified, as per

the Architectural drawings, as per the approved shop drawings, as

specified, and as directed by the Engineer- in Charge.

For payment, only the actual area of glass on face # 1 of the glass panels

(but excluding the area of grooves and weather silicone sealant) provided

and fixed in position, shall be measured in sqm. (Payment for fixing of

Spandrel Glass Panels in the curtain glazing is included in cost of relevent

Item*).The properties of performance glass shall be decided by technical

sanctioning authority as per the site requirement.

Signature of Bidder 41 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Design, Fabrication, Supply & Instalation of fully engineered VS-1_253

mm sysytem for glazed wall using custom built point supported mullions.

Extrusions out of 6005A-T6 or 6061-T6 alloy having minimum UTS 30 KSI

& YST 28 KSI. The point supported wall will be designed as per local

building codes, minimum designed Wind Pressure confirming to be 1.8KPA

and deflection limit L/240+6.35mm. All the visible surfaces shall have

Standard Durable Powder Coating with a minimum thickness of 60 to 80

microns as per approved standard RAL shade and wooden finish & metal

grain finish cost will be extra. The system shall be face sealed with

combination of silicone extruded gaskets & wet seal weather sealant (DS

991/995). The entire system will be design-built using VS-1 point

supported non drilled glass system using DGU glass unit. No steel (other

than proposed steel) is used as secondary structure/substucture to hold

the glazed system. Price includes post installed brackets. Prices for

preparation of VS1 Structural analysis, Shop drawing, Fabrication drawing

and Installation drawing are included. Rate shall include necessary

Aluminium bracket / Clamp, Aluminium U-channel at periphery, fastening

straps, Spacer Tapes, nuts, bolts, rivets and washers. Anchor fasteners

and other fastening materials shall be in stainless steel, all in line with

shop drawing. All End jamb closures & Door jamb closures are included in

the system cost. Door system, door glass, facade glass shall be paid under

relevant sub-head of BoQ. All complete at all heights and levels including

scaffolding, tools, plants, hardware etc as per drawings and as directed by

Engineer-in-charge

Providing, supplying and fixing of 4mm thick (0.5mm+3.0mm+0.5mm)

aluminium composite pannel at coping The standard panel size of ACP

shall be used as per the elevations as shown in drawings. The rate shall

105 NS.19 include all necessary frame work, tools and fixing / lifting equipments,

scaffolding, technical personal and as per technical specifications,

complete in all respect as per the direction of the Engineer-in-Charge.

Signature of Bidder 42 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Aluminium composite panel consisting of 3mm core of 100% virgin

LDPE core material sandwiched between two aluminium skins of 0.5mm

thickness with a mild edge, 4 mm (Aluminium coil: AA3105H16 / 5005 H-

24) total thickness with surface finish of fluocarbon protective colour

coating (poly vinyl dene Fluoride coating Kynar-500) of thickness 18-20

microns shade as approved by the Architect, details as shown in the

elevation, plan and cross section drawings alongwith labour element for

cutting stacking, carrying to heights and fixing to appropriate

locations in included in the rates.

Signature of Bidder 43 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

The alloy for the aluminium panel shall be confirming to BS 1475.

Composite panel shall have a minimum total thickness of 4mm. The panel

shall be reinforced behind to meet the required structural design and

deflection criteria. The panel shall be designed with the fixity to allow

temperature variance and surface temperature differentials due to

ambient temperature differential without causing any effect on flatness of

the panels. Extruded aluminium sections shall be of 63400 WP alloy with

chemical composition and mechanical properties as per IS: 733:1983 and

I.S. 1285:2002. The installed composite panel surface shall not have

irregularities such as oil canning, waves, Buckles, and other irregularities

when viewed at any position not less than 15 degrees to the true plane of

the panel. The ACP cladding system incuding the framework shall be

aligned for the entire height and width by lazer beam equipment to ensure

100 percent 'X' axis 'Y'axis. The fixing of the panels shall be designed in

such a way that they should come in plane with the glass panels and there

shall be no deflection is visible on the external face in elevation. All the

vertical and horizontal section grooves and peripheral gaps shall be sealed

with approved make & grade sealant Non Staining / Non Bleeding weather

silicone including backer rod etc. to make the entire system airtight and

watertight. The aluminium frame work behind ACP panel for cladding shall

be consisting of chromotise rectangular tubelar as main frame, shall be

fixed to the structure with hot dipped galvanised m.s. brackets using

shims of varous thickness for adjustment and line variation.The anchoring

/ bracing of the cladding to the RCC slab / beams / columns shall be done

with non-corrosive galvanised brackets of approved shape / design with

normal / extended bracket as per details enclosed, including providing

aluminium shims of various thickness to adjust the level variations, fixing

with structurally designed dash fasteners to have minimum anchoring

depth of 50-60 mm in the concrete and to withstand the dead load of the

acp panels cladding as well as stresses developed due to wind pressure

The fixing of the panels shall be designed in such a way that they come in

plane with the glass panels if required. The peel off foil from ACP panels

shall be removed after completion of project or as per instructions of

Engineer-In-Charge.

Signature of Bidder 44 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Cost of ACP panel cladding complete in all respect at all mentioned

locations including the labour element for cutting and fabrication of ACP

panel along with aluminium tube stiffner at back and Galvanised brackets

for stability, stacking, carrying to heights and fixing in appropriate Sqm 175.50 4,980.00 8,73,990.00

locations shall be included in the rates. ACP panels shall be fabricated out

of 1220mm wide standard sheet Only surface area of aluminium

composite panel alongwith its groove shall be measured for payment.

Providing and fixing 100.0mm thick Gypwall Classic partition consist of

(“Patented in India (325062)”) Metal framework partition having

maximum reachable height of 3400mm satisfying L/240 criterion at

200Pa, possessing fire rating of 60mins, tested in accordance to BS-476

Part 20 & 22 & sound insulation (Rw) of 49dB, tested in accordance to ISO

10140-2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-

106 NS.20 value of 0.49W/m²K & Severe duty rating as per BS 5234 part 2. Partition

comprises of double layer, tapered edge Gypsum Board, certified GreenPro

by CII & strategic location of manufacturing plants results in lower carbon

emissions. Partition includes double layer of 12.5mm thick Gypboard

PlainISI marked, conforming to IS 2095 Part 1:2011, having flexural

strength – {Longitudinal > 500N & transverse > 180N} on either side of

the framing. Metal frame work,

Signature of Bidder 45 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

designed in compliance with BS EN 14195 & manufactured using CR1

Grade Steel as per IS 513, having yield stress of 300MPa & tensile

strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397

& tested for 500hrs of salt spray test as per ASTM B117, includes

48x34x36x0.5mm C-Stud with lip of 6.5mm and H-cutout on web

enabling the services to pass, having moment of inertia 26627mm4 about

major axis, positioned at 610mm c/c in 50x32x32x0.5mm Floor Channel

& 50x32x32x0.5mm Ceiling Channel with flanges bend at 5° acute angle.

Floor & Ceiling Channel is anchored with Rawl plug Ø8x45mm having Pull

Out strength of

6.8KN or Nail**, fixed at 600mm c/c in Center. 48x40x40x0.5mm Noggin

Channel to be placed between the studs, behind the horizontal board joint.

Gypboard PlainBoard strip is placed between Ceiling Channel and soffit

when fire rating is more than 30mins. Inner & Outer layer of ® Boards to

be Screw fixed with ®Drywall Screw of 25mm with 12nos per m2 & 35mm

with 24nos per m2 at spacing of 600mm & 300mm respectively. 25mm

Glasswool of density 32kg/m3 shall be placed in Metal framework with the

help of holding Clip. Edges & joints to be finished with ® Pro-Fill JC

conforming to ASTM C475 & ®Paper tape. Periphery & cut-outs of the

partition to be treated with suitable Fire & Acoustic Sealant. All the

performance test are carried out at NABL accredited/ government

approved lab. ( BELOW FALSE CELING)

Signature of Bidder 46 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providng and fixing 75.0mm thick Gypwall Classic partition consist of

(“Patented in India (325062)”) Metal framework having maximum

reachable height of 2500mm satisfying L/240 criterion at 200Pa,

possessing fire rating of 30mins, tested in accordance to BS-476 Part 20 &

22 & sound insulation (Rw) of 40dB, tested in accordance to ISO 10140-

2/ASTM E90 & spectrum adaption term as per ISO 717-1, having U-value

of 0.645W/m²K & Medium duty rating as per BS 5234 part 2. Partition

comprises of single layer, tapered edge Gypsum Board, certified GreenPro

by CII & strategic location of manufacturing plants results in lower carbon

emissions. Partition includes single layer of 12.5mm thick Gypboard®Plain

ISI marked, conforming to IS 2095 Part 1:2011, having flexural strength

– {Longitudinal > 500N & transverse > 180N} on both side of framing.

Metal frame work, in compliance with BS EN 14195 & manufactured using

CR1 Grade Steel as per IS 513, having yield stress of 300MPa & tensile

strength of 340MPa with surface finish of AZ150 as per IS 15961/AS 1397

107 NS.21 & tested for 500hrs of salt spray test as per ASTM B117, includes Sqm 236.70 1,979.00 4,68,429.30

48x34x36x0.5mm C-Stud with lip of 6.5mm, having moment of inertia

26627mm4 about major axis, positioned at 610mm c/c in

50x32x32x0.5mm Floor Channel & 50x32x32x0.5mm Ceiling Channel

with flanges bend at 5° acute angle. Floor & Ceiling Channel is anchored

with Rawl plug Ø8x45mm having Pull Out strength of 6.8KN or Nail**,

fixed at 600mm c/c in Center. 48x40x40x0.5mm Noggin Channel to be

fitted at the horizontal joints of board. Boards to be Screw fixed with

Drywall Screw of 25mm with 30nos per m2 at 300mm at center and

150mm at periphery. 25mm Glasswool of density 32kg/m3 shall be placed

in Metal framework with the help of holding Clip. Edges & joints to be

finished with Pro Fill JC conforming to ASTM C475 & Paper tape.

Periphery & cut-outs of the partition to be treated with suitable Acoustic

Sealant. All the performance test are carried out at NABL accredited/

government approved lab. (ABOVE FALSE CELING)

Signature of Bidder 47 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Supply and fixing of Chain operated roller system utilizing a bidirectional,

wrap spring clutch. The system capable of smoothly raising and lowering

the blind to any desired height, and maintaining that height with no

slippage. Brackets: Heavy duty zinc plated MS of thickness 2mm size 59

mmx 74 mm suitable for wall mounting and ceiling mounting. Couple

Brackets weight of approx 200gm each set. Bracket Covers: Ivory Color

pvc material part to cover metal bracket ~1.5 mm thick. Clutch:

Operation side supported by hex- gears for smooth operation. End Plug:

108 NS.21 Bearing ball mechanism made of zinc plated MS of 9mm OD surrounded Metre 154.00 2,332.00 3,59,128.00

by bearing balls to support blinds at other end for long durability and

smooth operation. This polyester cord molded inside pvc beads of 4.5mm

OD pitch 6mm, spreaded in ratio 1:1. Roller tube of extruded aluminium.

Wall thickness of ~1.3 mm Tube diameter 38mm. Bottom bars of

extruded aluminum of wall thickness of minimum ~1.2 mm, with 19 mm

grooves in front and back. Fabric of blinds pasted in front groove. Bottom

side groove of 5mm. At top fabric should be hold using pvc sticks of dia

3.5mm and wall thickness of 1.2 mm. (Moisture free, Water resistant,

Washable and FR Grade)

Providing and applying Frosted 3M CRYSTAL Glass Finishes 7725 /

GARWARE Glass Film

Signature of Bidder 48 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

ALUMINUM LOUVERS - For DG Flue Pipes

Providing and fixing PVDF aluminum extruded single bank louvers

with AMCA certification complete. The louvers should have hidden

mullions and an insect screen and should be equivalent to C/S louver model

RS-1605. All work to be complete with extruded aluminum sub frame

extruded built up standard elliptical section conforming to IS

733 and IS 1285 fixed with raw plugs and stainless steel screws or with

fixing clip or with expansion hold fasteners including necessary filling up of

gaps at junctions at top bottom and sides with required PVC/neoprene felt

complete in all respect.Alumnium sections shall be smooth rust free,

straight as per architectural drawings and the direction of Engineer-in-

charge etc. All structural steel support frame work shall be paid

separatelythe rate includes necessary scaffolding for the same.

Filling in plinth with sand under floors, including watering, ramming,

consolidating and dressing complete. Exsisting Excavated Sand has to be

utilized for Filling. Contractor to make arrangements to store Excavated

FIRE DOOR As per IS 3614:2021

112 NS 26 Insulated Hollow metal fire doors

Providing and fixing of Medium Duty hollow metal fire rated doors as per

IS 3614: 2021, for 120min integrity & 30min. insulation. Pressed galvanized

steel confirming to IS 277 with the following specification. Recommended

fire door shall be tested as per IS/ISO 3008-1 & IS/ ISO 834-1, from CBRI

or equivalent approved lab. Labled fire doors shall be with fire rated

hardware and vision panel all as a complete assembly. Proper label

confirming the type of door and the hourly rating is mandatory.

Signature of Bidder 49 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Door frame shall be step rebate grooved profile of size 125 x 75mm made

out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames

shall be mitered and field assembled with self tabs. Frames to have inbuild

grooved sealing system for taking fire rated seals. All provision should be

mortised, drilled and tapped for receiving appropriate hardware. Frames

should be provided with back plate bracket and anchor fasteners for

installation on a finished plastered masonry wall opening. Frames shall be

filled with fire rated puff.

Door leaf shall be 60mm thick fully flush double skin step design door,

insulated with or without vision lite. Door leaf shall be manufactured from

1.2mm (18guage) minimum thick galvanised steel sheet. The internal

construction of the door should be rigid reinforcement pads for receiving

appropriate hardware. The infill material shall be 120kg high density mineral

wool insulation material. Intumescent seals 15 x 1.5mm to be provided. All

doors shall be factory prepped for receiving appropriate hardware and

provided with necessary reinforcement for hinges, locks, and door closers.

The edges should be interlocked with a bending radius of 1.4mm. For pair

of doors integrated astragals has to be provided on the meeting stile for

both active and inactive leaf. Vision lite wherever applicable should be

provided for 6mm clear borosilicate fire rated glass as per manufacturers

recommendation with a clipon arrangement.

Door and frames shall be finished Pure Polyster Powder coated and shall

have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame,shutter as a complete

1.1 assembly. All hardware, smoke seals & glass including tapes cost will be

paid extra as per the hardware schedule

Vision lite wherever applicable should be 6mm clear borosilicate fire rated

glass as per manufacturers recommendation with a clipon arrangement.

Signature of Bidder 50 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

120 Mins Fire Rated Door with 30 Mins Insulation FD1A Double leaf of size

2000 x 2450mm with vision panel 200 x 300mm with hardware set 3

120 Mins Fire Rated Door with 30 Mins Insulation FD1 Single leaf of size

1200 x 2450mm with vision panel 200 x 300mm with hardware set 1

113 NS 27 Un-Insulated Hollow metal fire doors

Providing and fixing of Medium Duty hollow metal fire rated doors as per

IS 3614: 2021, for 120min integrity only. Pressed galvanized steel

confirming to IS 277 with the following specification.Recommended fire door

shall be tested as per IS/ISO 3008 & IS/ ISO 834-1, from Exova/TBW/CBRI

approved lab.Labled fire doors shall be with fire rated hardware and vision

panel all as a complete assembly. Proper label confirming the type of door

and the hourly rating is mandatory.

Door frame shall be single rebate grooved profile of size 125 x 55mm

made out of 1.20mm (18gauge) minimum thick galvanized steel sheet.

Frames shall be mitered and field assembled with self tabs. Frames to have

inbuild grooved sealing system for taking fire rated seals. All provision

should be mortised, drilled and tapped for receiving appropriate hardware.

Frames should be provided with back plate bracket and anchor fasteners

for installation on a finished plastered masonry wall opening. Frames shall

be filled with fire rated puff.

Signature of Bidder 51 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Door leaf shall be 46mm thick fully flush double skin door, sandwiched

panel un-insulated with or without vision lite. Door leaf shall be

manufactured from 1.2mm (18guage) minimum thick galvanised steel

sheet. The internal construction of the door should be rigid reinforcement

pads for receiving appropriate hardware. The infill material shall be

honeycomb core. All doors shall be factory prepped for receiving

appropriate hardware and provided with necessary reinforcement for

hinges, locks, and door closers. The edges should be interlocked with a

bending radius of 1.4mm. For pair of doors integrated astragals has to be

provided on the meeting stile for both active and inactive leaf. Vision lite

wherever applicable should be provided for 6mm clear borosilicate fire

rated glass as per manufacturers recommendation with a clipon

Door and frames shall be finished Pure Polyster Powder coated and shall

have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame,shutter as a complete

assembly as mentioned in the door and hardware schedule. All hardware,

smoke seals & glass including tapes cost will be paid extra as per the

hardware schedule

Vision lite wherever applicable should be 6mm clear borosilicate fire rated

glass as per manufacturers recommendation with a clipon arrangement.

120 Mins Fire Rated Door FSD1 Single leaf of size 750 x 2450mm without

vision panel with hardware set 6

120 Mins Fire Rated Door FD1a Single leaf of size 1050 x 2450mm with

200 x 300mm vision panel with hardware set 4

120 Mins Fire Rated Door FD Single leaf of size 1200 x 2450mm with 200 x

300mm vision panel with hardware set 2

Signature of Bidder 52 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

120 Mins Fire Rated Door FD2 Double leaf of size 2000 x 2450mm with

200 x 300mm vision panel with hardware set 5

114 NS 28 Insulated glazed fire door & Partition (E/EW120, EI30)

Providing and fixing of insulated glazed fire door as per IS 16947 for

stability, integrity (E/EW 120) & Insulation (EI 30). Pressed galvanized steel

confirming to IS 277 with the following specification. Glazed door shall be

tested to IS/ISO 834-1, IS/ISO 3008-1 for integrity & insulation (E/EW 120).

Glazed door shall be tested from CBRI/ TBW / CERTIFIER for maximum

rating of 120mins with 30Mins Insulation. Test certificates should be made

available for max door size tested as a complete assembly. Proper label

confirming the type of door and the hourly rating is mandatory.

Door frames and partitions shall be single rebate frame profile of size 125

x 60mm made out of 1.60mm (16gauge) minimum thick galvanized steel

sheet. Frames shall be butted/mitered and with mandatory provision for

smoke seal and field assembled with self tabs. All transom profiles and side

panels shall be from similar profile and should be as per the tested

specimen. For partitions, Glass should be held in its place with 1.2mm GI

clip-on beading 19mm height. Screws shall be 8 x 19mm steel screws, self

tapping and concealed inside the beading at every 250 m c/c and a ceramic

tape of the cross section of 4 mm x 13mm as per the test evidence. Door

frames shall be with back plate bracket and anchor fasteners for installation

on a finished plastered masonry wall opening. The top support formounting

shall be included as per design requirement. Once frame installed should

be filled with PUF as recomended by the manufacturer or engineer.

Signature of Bidder 53 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Door leaf shall be fully glazed SH100 profile of size 60 x 100mm profile step

box section for taking glass elements. Door leaf shall be manufactured from

1.2mm (18guage) minimum thick galvanised steel sheet. Glass should be

held in its place with 1.2mm x 19mm GI clip-on beading. Screws shall be 8

x 19mm, self tapping and concealed inside the beading at every 250 m c/c

and a ceramic tape of the cross section of 4 mm x 13mm as per the test

evidence. Doors shall be 60mm thick and the internal construction of the

door should be rigid reinforcement pads for stability of profile & infill of high

density mineral wool. All provision should be mortised, drilled and tapped

for receiving appropriate hardware. For pair of doors integral astragals has

to be provided on the meeting stile. The glass shall be fire rated, ultra clear,

interlayered 11mm thick Pyran Fusion, for (E) 120 minutes integrity & (EI

30) 30minutes insulation with light transmission of minimum 89% as per

EN1363 and EN1364. Glass shall have a impact resistance of 1B1 as per

EN 12600 and sound insulation of 37db. Glazing kit to be provided along

with steel beeding and ceramic tape.

All doors and frames shall be finished Pure Polyster Powder coated and

shall have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame, shutter as a complete

120 Mins Fire Rated Glazed Door with 30 Mins Insulation FDG1 Double leaf

115 NS 29 Un-insulated glazed fire door & Partition (E120)

Signature of Bidder 54 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing of glazed uninsulated fire door as per IS 16947 for

stability and integrity (E120). Pressed galvanized steel confirming to IS 277

with the following specification. Glazed door shall be tested to IS/ISO 834-1

& IS/ISO 3008-1 for integrity (E120). Glazed door shall be tested from

CBRI/ TBW / CERTIFIER for maximum rating of 120mins, in latched

/unlatched condition (if used with deadbolts and pull handles). Test

certificates should be made available for max door size tested as a

complete assembly. Proper label confirming the type of door and the hourly

rating is mandatory.

Door frames and partitions shall be single rebate frame profile of size 125

x 60mm made out of 1.60mm (16gauge) minimum thick galvanized steel

sheet. Frames shall be butted/mitered and with mandatory provision for

smoke seal and field assembled with self tabs. All transom profiles and side

panels shall be from similar profile and should be as per the tested

specimen. For partitions, Glass should be held in its place with 1.2mm x

19mm GI clip-on beading. Screws shall be 8 x 19mm, self tapping and

concealed inside the beading at every 250 m c/c and a ceramic tape of the

cross section of 4 mm x 13mm as per the test evidence. Door frames shall

be with back plate bracket and anchor fasteners for installation on a

finished plastered masonry wall opening. The supports for mounting the

system from top shall be included as per design requirement. Once frame

installed should be filled with PUF as recomended by the manufacturer or

Signature of Bidder 55 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Door leaf shall be fully glazed SH100 profile of size 60 x 100mm profile step

box section for taking glass elements. Door leaf shall be manufactured from

1.2mm (18guage) minimum thick galvanised steel sheet. Glass should be

held in its place with 1.2mm x 19mm GI clip-on beading. Screws shall be 8

x 19mm, self tapping and concealed inside the beading at every 250 m c/c

and a ceramic tape of the cross section of 4 mm x 13mm as per the test

evidence. Doors shall be 60mm thick and the internal construction of the

door should be rigid reinforcement pads for stability of profile & infill of resin

bonded honycomb for rigidity. All provision should be mortised, drilled and

tapped for receiving appropriate hardware. For pair of doors integral

astragals has to be provided on the meeting stile. The glass should CE

rated minimum 10mm thick clear fire rated non-wired and toughened with

120 minutes stability, integrity and light transmission of minimum 90% in

accordance to EN1363 and EN1364. The glass should be compliant to

Class A category of Impact Resistance as per BS 6206: 1981 and 1(C)1

category of EN12600. Glazing kit to be provided along with steel beeding

and ceramic tape.

All doors and frames shall be finished Pure Polyster Powder coated and

shall have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame, shutter as a complete

assembly. Sq.mt

120 Mins Fire Rated Glazed Door with 30 Mins Insulation FDG1 Double leaf

of size 3000(400+2200+400 x 2450mm with hardware set 6

Fire Door Hard Ware Set for Each Type ( Cost to be included in

Basic Item) ( Rate included in Door item)

HS1 - Single leaf door (1200 x 2450mm) FD1

Signature of Bidder 56 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

FD120min + insulated Stair case

Ball bearing butt hinge, SS304, of size 100 x 89 x 3mm with screws sss finish - each 5

Single point surface panic latch, XDB5760SV, Silver finish each 1

External lever handle, 1185, with half cylinder, Silver Finish each 1

Surface door closer HDC 35, EN 3-5 with slide arm, Silver finish each 1

Intumescent seal 15 x 1.5mm for insulated door Rmt 7

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 7

HS2 - Single leaf door (1200 x 2450mm) FD1

5 Knl, Ball bearing hinges size 4"x3"x3mm, SSS each 4

Mortise Dead lock, H4, 55 BS/8mm, SSS finish each 1

Euro profile 5 pin cylinder 5702, 70mm Key x Key, NP finish. each 1

Escutheions 6612 for Europrofile cylinder SSS pair 1

Pull handle D type PD12, 25 dia, CTC 300mm, back to back, with extended spindle,

SS 304, SSS Finish

Surface door closer, HDC03, EN2/3 & 4 with standard arm, Silver finish each 1

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 7

HS3 - Double leaf door (2000 x 2400mm) FD1A

FD120min - Staircase

Ball bearing butt hinge, SS304, of size 100 x 89 x 3mm with screws sss finish - each 10

Single point surface panic latch, XDB5760SV, Silver finish each 1

Two point surface panic bolt, XDB5120SV, H=2600mm, Silver finish each 1

External lever handle, 1185, with half cylinder, Silver Finish each 1

Double door Strike Plate each 1

Surface door closer HDC 35, EN 3-5 with slide arm, Silver finish each 2

Door coordinator SR 390 surface mounted, Silver each 1

Intumescent seal 15 x 1.5mm for insulated door Rmt 10

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 7

HS4 - Single leaf door (1050 x 2450mm) FD1a

Signature of Bidder 57 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

FD120min - Electrical room

5 Knl, Ball bearing hinges size 4"x3"x3mm, SSS each 4

Mortise Dead lock, H4, 55 BS/8mm, SSS finish each 1

Euro profile 5 pin cylinder 5702, 70mm Key x Key, NP finish. each 1

Escutheions 6612 for Europrofile cylinder SSS pair 1

Pull handle D type PD12, 25 dia, CTC 300mm, back to back, with extended spindle,

SS 304, SSS Finish

Surface door closer, HDC03, EN2/3 & 4 with standard arm, Silver finish each 1

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 6

HS5 - Double leaf door (2000 x 2450mm) FD2

FD120min - Fire pump room

5 Knl, Ball bearing hinges size 4"x3"x3mm, SSS each 8

Mortise Dead lock, H4, 55 BS/8mm, SSS finish each 1

Euro profile 5 pin cylinder 5702, 70mm Key x Key, NP finish. each 1

Escutheions 6612 for Europrofile cylinder SSS pair 1

Pull handle D type PD12, 25 dia, CTC 300mm, back to back, with extended spindle,

SS 304, SSS Finish

Surface door closer HDC 35, EN 3-5 with slide arm, Silver finish each 2

RB10 Flush Bolt L=300mm each 1

RB10 Flush Bolt L=600mm each 1

Dust proof floor socket for flush bolt each 1

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 7

HS6 - Double leaf door (400+2200+400 x 2450mm) FGD1

FD120min Fully glazed - Main lift lobby

Ball bearing butt hinge, SS304, of size 100 x 89 x 3mm with screws sss finish - each 10

Narrow profile dead lock H6, 35 BS, 20 mm sq. forend, sss each 1

Euro profile 5 pin cylinder , 80mm Key x Key, NP finish. each 1

Narrow profile escutheions for Europrofile cylinder SSS pair 1

Pull handle D type (Offset), 32 dia, CTC 600mm, back to back, with with extended

spindle, SS 316, SSS finish

Surface door closer HDC 35, EN 3-5 with slide arm, Silver finish each 2

Signature of Bidder 58 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Door coordinator SR 390 surface mounted, Silver each 1

RB10 Flush Bolt L=300mm each 1

RB10 Flush Bolt L=600mm each 1

Dust proof floor socket for flush bolt each 1

HS7 - Double leaf door (2200 x 2450mm) FDG1

FD120min Fully glazed - Refuge area

Ball bearing butt hinge, SS304, of size 100 x 89 x 3mm with screws sss finish - each 20

Narrow profile dead lock H6, 35 BS, 20 mm sq. forend, sss each 2

Euro profile 5 pin cylinder , 80mm Key x Key, NP finish. each 2

Narrow profile escutheions for Europrofile cylinder SSS pair 2

Pull handle D type (Offset), 32 dia, CTC 600mm, back to back, with with extended

spindle, SS 316, SSS finish

Surface door closer HDC 35, EN 3-5 with slide arm, Silver finish each 4

Door coordinator SR 390 surface mounted, Silver each 2

RB10 Flush Bolt L=300mm each 2

RB10 Flush Bolt L=600mm each 2

Dust proof floor socket for flush bolt each 2

Intumescent seal 15 x 1.5mm for insulated door Rmt 20

HS8 - Single leaf door (750 x 2450mm) FSD1

FD120min - LV shaft

5 Knl, Ball bearing hinges size 4"x3"x3mm, SSS each 4

Mortise shaft lock, H7, 57 BS, SSS finish each 1

Flush pull handle CH 120S, 120mmx40mm, sss each 1

Fire rated seal for grooved frame profile C421 EPDM Black - Rmt 7

Signature of Bidder 59 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing stainless steel ( Grade 316) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

116 NS 30 with necessary accesDSRies & stainless steel dash fasteners , stainless Kg 2,496.36 516.00 12,88,121.76

steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-incharge,(for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accesDSRies such as nuts, bolts, fasteners

Providing & installing factory made wooded cabinets & shutters 18mm

thickness of approved shade made from HDMR boards, which are pre

laminated from inside and membane finish will be at the outer shutters,

exposed edges shall be sealed with edge banding of same shade and

colour. Shutters shall be fixed to the cabinets using Soft close hinges,

Channel & with necessary hardware, drawers etc as required.

Providing and fixing bright finished brass 100 mm mortice latch and lock

with 6 levers and a pair of lever handles of approved grade, design and

make with necessary screws etc. all complete as per drawings,schedule,

specifications and as directed by Architect.

Signature of Bidder 60 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

ParticularFRP Sculpture

MaterialIsopthalic Resin Fibre Glass casting with 6-10 mm thickness

Structural MaterialFRP with preper metal structure (MS square pipe of

reputed company) inside which can take wind pressure

Colour & TextureAs required

DetailsRealistic from all angles and the portrayal of face should bear a

BOQ for Fibreglass Abstract Artwork/ Relief Mural:

119 NS-34 Design Manufacture Supply and Installation of Abstract Artwork/ Relief Sq.Mtr. 1.05 1,41,702.00 1,48,787.10

Mural Fire Retardant Expanded Polystyrene coated with Polyurethane/

Isopthalic resin FRP with chopped strand glass mat 3-6 mm thickness,

paints and PU Lacquer, SS casting and other items, Paint with base and

exterior wall paints OIL / Ultima / Metallic as per equirement, in Office

Building Atrium as per design.

The executing agency would design, take the approval from NBCC/

Architect before execution and execute the design.

Provding & Fixing DORMAKABA BB 4330 or equivalent make, 5 Knuckle, 2

Ball bearing butt hinges size 4" x 3" x 3mm, in SS 304 and in SSS finish.

Suitable for door weights upto 120kgs. Template Drilled complete as per

direction of Engineer-in-charge

Provding & Fixing DORMAKABA pull Handle TGDI-D 300 or equivalent

make back to back with adjustable fixing for glass, wood and metal doors

121 NS-36 in satin stainless steel. The pull handles should have supporting washer pair 35.00 2,133.00 74,655.00

with raised bevelling on the outer surface. Length =300mm, 22mm dia, -

SS304 complete as per direction of Engineer-in-charge

Provding & Fixing DORMAKABA 706 or euivalent make Type 1 Package

with 55mm backset, 20mm square forend prepared for euro profile

122 NS-37 cylinder including strike plate. and EPC 60mm Length both side key Each 35.00 2,868.00 1,00,380.00

operation & Escutcheons in SSS Finish complete as per direction of

Engineer-in-charge

Signature of Bidder 61 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing & Fixing DORMAKABA rack and pinion door closer TS 68 EN or

euivalent make size 2/3/4, with std. arm and with two independent

123 NS-38 closing valves and latching speed adjustable by arm. Silver finish. As per Each 35.00 2,871.00 1,00,485.00

EN 1154 complete as per direction of Engineer-in-charge

Provding & Fixing DORMAKABA 3108 or equivalent make floor stop half

124 NS-39 dome with 45mm dia with fixing accessories, in satin Chrome complete as Each 35.00 328.00 11,480.00

per direction of Engineer-in-charge

Providing & Fixing DORMAKABA ITS 96, or euivalent concealed cam

action door closer with G 96 N slide channel arm with standard spindle,

125 NS-40 including cushioned limit stay, adjustable closing force EN 2-4 spring as Each 1 22,890.55 22,890.55

per EN 1154 and CE marked. Silver finish. Non-handed. complete as per

direction of Engineer-in-charge

Providing & Fixing DORMAKABA pull Handle TGDI-H 450 or equivalent

make, back to back with 350mm CTC, adjustable fixing for glass, wood

126 NS-41 and metal doors in satin stainless steel. The pull handles should have Pair 1 4,007.00 4,007.00

supporting washer with raised bevelling on the outer surface. Length

=450mm, 25mm dia, -SS304 complete as per direction of Engineer-in-

Providing & Fixing DORMAKABA 271 or equivalent make Sash lock with

Pure 8100 Lever Handle with 6501 Roses, 6612 Escutcheons, 8 mm

Spindle with Fixing Screws for door thickness 35-55 mm and EPC TTK Key

- 60 mm complete as per direction of Engineer-in-charge

Desigining, Fabricating & Installation in position Celing suspended Art

Installation at Ground Floor Reception Lobby in PVDF coated Aluminium

128 NS-43 Sheet in approved colour as shown below image, hanged with the help of

Multistand Steel Wires, including the cost of Fastners, Hooks designed to

hold the Weight of Art Installation complete as per direction of Architect

& Engineer - In - Charge

Approx Size of Art Installation ( 4.0 Mtrs x 4.0 Mtrs) Each 16 18000 288000

Signature of Bidder 62 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

TOTAL N.S ITEM FOR 1 NOS ii 9,28,08,710.07

Total DSR+N.S i+ii 33,21,50,693.98

BOUNDARY WALL & GATE

BILL OF QUANTITY (CIVIL WORK)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

1 2.6 width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

2.6.1 All kinds of soil Cum 477.00 181.85 86,742.45

Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

2 2.25 each deposited layer by ramming and watering, lead up to 50 m and lift Cum 384.00 219.65 84,345.60

4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

3 4.1 excluding the cost of centering and shuttering - All work up to plinth level

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40

mm nominal size)

Signature of Bidder 63 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,

4 4.2 abutments, pillars, posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,

sunken floor etc., up to floor five level, excluding the cost of centering,

shuttering and finishing:

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20

mm nominal size)

5 REINFORCED CEMENT CONCRETE WORK

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 5,883.00 83.50 4,91,230.50

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 2,042.00 83.50 1,70,507.00

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

7 5.33 recommended proportions as per IS: 9103 to accelerate, retard setting of

concrete, improve workability without impairing strength and durability as

per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/

less cement used as per design mix is payable/recoverable separately).

5.33.1 All works upto plinth level Cum 69.00 7,997.30 5,51,813.70

5.33.2 All works Above plinth level Cum 14.00 9,400.85 1,31,611.90

Centering and shuttering including strutting, propping etc. and removal of

Signature of Bidder 64 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 151.00 284.85 43,012.35

Lintels, beams, plinth beams, girders, bressumers and

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 283.00 733.70 2,07,637.10

6 MASONARY WORK:

Brick work with common burnt clay F.P.S. (non modular) bricks of class

9 6.4 designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 100.00 7,590.45 7,59,045.00

8 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

10 8.2 approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at

Providing edge moulding to 18 mm thick marble stone counters, Vanities

11 8.3 etc., including machine polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 249.00 376.25 93,686.25

Providing and fixing stainless steel cramps of required size and shape for

anchoring stone wall lining to the backing or securing adjacent stones in

12 8.15 stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), Kg 180.00 612.60 1,10,268.00

including making the necessary chases in stone and holes in walls

wherever required.

Signature of Bidder 65 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Steel work welded in built up sections/ framed work, including cutting,

13 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Providing and fixing carbon steel galvanised ( minimum coating 5 micron)

dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480

14 10.27 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame , concrete/ masonry, etc.

as per direction of Engineer-in-charge.

13 FINISHING WORK

15 mm cement plaster on rough side of single or half brick wall of mix:

16 13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm)

13.45.1 over and including priming coat of exterior primer applied Sqm 269.00 232.00 62,408.00

@ 2.20kg/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade :

13.61.1 Two or more coats on new work Sqm 44.00 121.55 5,348.20

Providing and applying white cement based putty of average thickness 1

18 13.80 mm, of approved brand and manufacturer, over the plastered wall surface Sqm 269.00 115.15 30,975.35

to prepare the surface even and smooth complete.

Signature of Bidder 66 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Total DSR ITEM 42,66,829.55

Granite stone slab 18 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3

19 NS.4 coarse sand ) and jointed with grey cement slurry mixed with pigment to Sqm 210.00 3,737.00 7,84,770.00

match the shade of the slab, including rubbing and polishing complete.

TOTAL N.S ITEM FOR 1 NOS ii 7,84,770.00

Total DSR+N.S i+ii 50,51,599.55

Guard room, VCB Room & Meter Room

BILL OF QUANTITY (CIVIL WORK)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Earth work in excavation by mechanical means (Hydraulic

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

1 2.6 width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

2.6.1 All kinds of soil Cum 95.00 181.85 17,275.75

Filling available excavated earth (excluding rock) in trenches, plinth, sides

of foundations etc. in layers not exceeding 20cm in depth, consolidating

2 2.25 each deposited layer by ramming and watering, lead up to 50 m and lift Cum 101.00 219.65 22,184.65

Supplying and filling in plinth with sand under floors, including watering,

ramming, consolidating and dressing complete.

Signature of Bidder 67 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Surface dressing of the ground including removing vegetation and

4 2.28 inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to

50 m and lift up to 1.5 m.

2.28.1 All Kinds of Soil. sqm 110.00 24.35 2,678.50

Supplying chemical emulsion in sealed containers including delivery as

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 3.00 200.85 602.55

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-

termite treatment (excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emul sion @ one

litre per hole, 300 mm apart including drilling 12 mm diameter holes and

plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match

the existing floor:

2.35.3.1 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration sqm 106.00 227.05 24,067.30

4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade

7 4.1 excluding the cost of centering and shuttering - All work up to plinth level

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40

mm nominal size)

Providing and laying cement concrete in retaining walls, return walls,

walls (any thickness) including attached pilasters, columns, piers,

8 4.2 abutments, pillars, posts, struts, buttresses, string or lacing courses,

parapets, coping, bed blocks, anchor blocks, plain window sills, fillets,

sunken floor etc., up to floor five level, excluding the cost of centering,

shuttering and finishing:

1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20

mm nominal size)

Signature of Bidder 68 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement

: 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal

9 4.17 size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well Sqm 60.00 614.05 36,843.00

rammed and consolidated and grouted with fine sand, including necessary

excavation, levelling & dressing & finishing the top smooth

5 REINFORCED CEMENT CONCRETE WORK

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 1,726.00 83.50 1,44,121.00

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. K.G 2,110.00 83.50 1,76,185.00

Providing and laying in position machine batched and machine mixed

design mix M-25 grade cement concrete for reinforced cement concrete

work, using cement content as per approved design mix, including

pumping of concrete to site of laying but excluding the cost of centering,

shuttering, finishing and reinforcement, including admixtures in

12 5.33 recommended proportions as per IS: 9103 to accelerate, retard setting of

concrete, improve workability without impairing strength and durability as

per direction of Engineer-in-charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/

less cement used as per design mix is payable/recoverable separately).

5.33.1 All works upto plinth level Cum 18.00 7,997.30 1,43,951.40

5.33.2 All works Above plinth level Cum 18.00 9,400.85 1,69,215.30

Centering and shuttering including strutting, propping etc. and removal of

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm 30.00 284.85 8,545.50

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 43.00 693.05 29,801.15

Signature of Bidder 69 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Lintels, beams, plinth beams, girders, bressumers and

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 66.00 733.70 48,424.20

5.9.4 Shelves (Cast in situ) Sqm 3.00 693.05 2,079.15

Small lintels not exceeding 1.5 m clear span, moulding as in cornices,

5.9.18 window sills, string courses, bands, copings, bed plates, anchor blocks and Sqm 2.00 284.85 569.70

5.9.16 Edges of slabs and breaks in floors and walls

6 MASONARY WORK:

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 5.00 6,157.45 30,787.25

Providing and laying autoclaved aerated cement blocks masonry with

150mm/230mm/300 mm thick AAC blocks in super structure above plinth

15 6.47 level up to floor V level with RCC band at sill level and lintel level cum 21.00 6,636.95 1,39,375.95

with approved block laying polymer modified adhesive mortar all complete

as per direction of Engineer-in-Charge. (The payment of RCC band and

reinforcement shall be made for seperately).

8 CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity

counters, window sills, facias and similar locations of required size,

16 8.2 approved shade, colour and texture laid over 20 mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at

8.2.2.2 Area of slab over 0.50 sqm Sqm 3.00 4,007.65 12,022.95

Signature of Bidder 70 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing edge moulding to 18 mm thick marble stone counters, Vanities

17 8.3 etc., including machine polishing to edge to give high gloss finish etc.

complete as per design approved by Engineer-in-Charge.

8.3.2 Granite work Metre 53.00 376.25 19,941.25

Extra for fixing marble /granite stone, over and above corresponding basic

18 8.4 item, in facia and drops of width upto 150 mm with epoxy resin based MTR 6.00 434.25 2,605.50

adhesive, including cleaning etc. complete.

Providing and fixing stainless steel cramps of required size and shape for

anchoring stone wall lining to the backing or securing adjacent stones in

19 8.15 stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), Kg 294.00 612.60 1,80,104.40

including making the necessary chases in stone and holes in walls

wherever required.

9 WOOD & PVC WORK

Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length ( hold fast lugs or dash

fastener shall be paid for separately).

9.1.1 Second Class teak wood Cum 1.00 1,30,183.05 1,30,183.05

Providing and fixing ISI marked flush door shutters conforming to IS :

2202 (Part I) non-decorative type, core of block board construction with

21 9.21 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges with

necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm

22 9.23 minimum depth on all edges of flush door shutters (over all area of door Sqm. 15.00 401.40 6,021.00

shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to

Signature of Bidder 71 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame

with 10 mm diameter bolts, nuts and wooden plugs and embedding in

24 9.53 cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand each 32.00 179.20 5,734.40

: 6 graded stone aggregate 20mm nominal size).

Providing and fixing bright finished brass tower bolts (barrel type) with

necessary screws etc. complete :

Providing and fixing bright finished brass handles with necessary screws

Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete

Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

28 9.84 embossed on the body, door weight upto 36 kg to 80 kg and door width each 6.00 851.60 5,109.60

from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete

Providing & Fixing decorative high pressure laminated sheet of plain /

wood grain in gloss / matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming to

IS : 2046 Type S, including cost of adhesive of approved quality

Steel work welded in built up sections/ framed work, including cutting,

30 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and

Signature of Bidder 72 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

31 10.28 with necessary accesDSRies & stainless steel dash fasteners , stainless Kg 260.00 575.45 1,49,617.00

steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-incharge,(for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accesDSRies such as nuts, bolts, fasteners

Providing and fixing carbon steel galvanised ( minimum coating 5 micron)

dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480

32 10.27 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6

grade sleeve, including drilling of hole in frame , concrete/ masonry, etc.

as per direction of Engineer-in-charge.

11 FLOORING WORK

33 11.24 Extra for pre finished nosing to treads of steps of marble stone. MTR 31.00 530.25 16,437.75

Extra for marble stone flooring in treads of steps and risers using single

length up to 2.00 metre.

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 mm thick stone slab

35 11.56 over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4

coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing

, curing and polishing etc. all complete as specified and as directed by the

Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown,

Cat Eye or equivalent.

Signature of Bidder 73 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 stone aggregate 10 mm and down gauge), including finishing

with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

12.21. In 75x75mm deep chase

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20

mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and

initial emittance > 0.75on waterproof and sloped surface of terrace, laid

on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4

37 12.55 coarse sand) and grouting the joints with mix of white cement & marble Sqm 44.00 1,374.10 60,460.40

powder in ratio of 1:1, including rubbing and polishing of the surface upto

3 cuts complete, including providing skirting upto 150 mm height along

the parapet walls in the same manner.

13 FINISHING WORK

38 13.4 12 mm cement plaster of mix :

39 13.16 6 mm cement plaster of mix :

1:3 (1 cement : 3 fine sand)

Providing and applying plaster of paris putty of 2 mm thickness over

plastered surface to prepare the surface even and smooth complete.

41 13.45 Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm)

13.45.1 over and including priming coat of exterior primer applied Sqm 10.00 232.00 2,320.00

@ 2.20kg/10 sqm

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work Sqm 159.00 128.65 20,455.35

Signature of Bidder 74 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Painting with synthetic enamel paint of approved brand and manufacture

to give an even shade :

13.61.1 Two or more coats on new work Sqm 10.00 121.55 1,215.50

Providing and applying white cement based putty of average thickness 1

44 13.80 mm, of approved brand and manufacturer, over the plastered wall surface Sqm 10.00 115.15 1,151.50

to prepare the surface even and smooth complete.

Providing and fixing glazing in aluminium door, window, ventilator

shutters and partitions etc. with EPDM rubber / neoprene gasket etc.

45 21.3 complete as per the architectural drawings and the directions of engineer-

in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone

work by providing weather silicon sealant over backer rod of approved

quality as per architectural drawings and direction of Engineer-in-charge

21.8.1 Upto 5mm depth and 5 mm width Metre 36.00 79.45 2,860.20

22 WATER PROOFING WORK:

Signature of Bidder 75 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Providing and laying integral cement based water proofing treatment

including preparation of surface as required for treatment of roofs,

balconies, terraces etc consisting of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement

admixed with water proofing compound conforming to IS. 2645 and

approved by Engineer-in-charge over the RCC slab including adjoining

walls upto 300 mm height including cleaning the surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to

115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand)

admixed with water proofing compound conforming to IS : 2645 and

approved by Engineer-in-charge over 20 mm thick layer of cement mortar

of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge to

required slope and treating similarly the adjoining walls upto 300 mm

47 22.7 height including rounding of junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement

slurry using 2.75 kg/ sqm of cement admixed with water proofing

compound conforming to IS : 2645 and approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix

1:4 (1 cement :4 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge including

laying glass fibre cloth of approved quality in top layer of plaster and

finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All above

operations to be done in order and as directed and specified by the

Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as

Total DSR ITEM 30,58,070.45

Signature of Bidder 76 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

DSR DESCRIPTION

Item UNIT QTY. RATE AMOUNT

Granite stone slab 18 mm thick in risers of steps, skirting, dado and

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3

48 NS.4 coarse sand ) and jointed with grey cement slurry mixed with pigment to Sqm 133.00 3,737.00 4,97,021.00

match the shade of the slab, including rubbing and polishing complete.

Providing Anti skid Grooves of size 3mmx3mm in granite stone at

49 NS.7 locations as indicated in the drawing all complete at all heights and levels Metre 92.00 23.00 2,116.00

TOTAL N.S ITEM FOR 1 NOS ii 4,99,137.00

Total DSR+N.S i+ii 35,57,207.45

Signature of Bidder 77 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

S.no CODE DESCRIPTION OF ITEM UNIT AL Rate(In Rs) Amount

Providing and fixing of signages,of various widths and lengths, to form

I suggested usages,made of Acrylic sheet of 5 mm , duly printed with

1 WFS Way finding Signs

a Way finding ceiling hung sign(both side) each 5,390.00

Way finding ceiling hung sign(both side) each 20 5,390.00 1,07,800.00

2 TOI Toilets

a G,L,H Gents ,Ladies & Handicap (Wall Projected(both side) each 8 733.00 5,864.00

3 NP Name plate

a Number plate (4 digits) each 625.00

Locker number plate each 625.00

b Room designation each 25 1,093.00 27,325.00

d Wall mounted over Door each 70 1,405.00 98,350.00

f Number plate Toilet each 16 625.00 10,000.00

g Staircase number plate each 20 1,562.00 31,240.00

7 14WL Waiting Lounge

a Wall mounted each 10 5,155.00 51,550.00

a Lifts (Elevators nos.) each 40 1,562.00 62,480.00

b Stairs Wall Projected(both side) each 1,405.00

c Door mounted each 625.00

f Drinking Water each 1,405.00

g Electric / AHU rooms each 10 1,405.00 14,050.00

1 DLL Directory at Lift Lobby

a Floor(levels) each 1,874.00

b Department each 1,874.00

3 10 Reg Registeration/Reception etc.

a B Behind Counter each 8 2,811.00 22,488.00

b C Ceiling hung over counter(both sides) each 2,811.00

4 DD Department Direction

a W Wall mounted each 2,811.00

5 13DN Department Name

a C Ceiling hung (both sides) each 7,655.00

6 14WL Waiting Lounge

a C Ceiling hung (both sides) each 7,655.00

Signature of Bidder 78 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

a Silent Zone each 1,405.00

b No Smoking each 10 1,403.00 14,030.00

Providing and fixing of edge lit ,emergency exit sign with 2 hrs power

back up, concealed in false ceiling,of approved makes

1 H LED SIGN with 2hr backup each 9,373.00

Providing and fixing of Photoluminescent, 1mm rigid pvc based sheet

containg lumingen 3, as base chemical,with high intensity luminous

glow capacity. each sign which is required to be mounted on wall

VI FES surface shall be MOUNTED ON 3MM ROUTER CUT Aluminium composite

panel with 25mm boarder all around over the size of photoluminescent

sign, ACP shall have rounded corners and fixed on wall surface as per

1 FH PHOTOLUMINESCENT , FIRE HOSE & Stairs each 20 1,249.00 24,980.00

4 FA PHOTOLUMINESCENT ,FIRE ALARM CALL POINT each 20 936.00 18,720.00

6 P&P PHOTOLUMINESCENT ,PULL AND PUSH each 20 390.00 7,800.00

Providing and fixing Main Directory made of Acrylic sheet of 5 mm with

XIII vinyl pasting shall be of size 1no. of 1200x900mm with proper fixing

arrangement on wall.

Main Directory each 11,717.00

Providing and fixing Main Directory made of Acrylic sheet of 5mm with

XIV vinyl pasting shall be of size 1no. of 1200x900mm with proper fixing

arrangement on wall.

Building Name & Logo each

Sub Total 4,97,535.00

Signature of Bidder 79 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Sr. No. PARTICULAR UNIT QTY RATE AMOUNT

Supply, installation, testing & commissioning of lift of following capacities and type

suitable for operation on 415 V, 3 phase, 50 Hz AC supply, having AC variable

voltage and variable frequency typel, without machine room, speed of 1.5

Mtr/sec, electromagnetic brake system, simple operations, operating control panel

1 1 with luminous buttons, overload warning indicator, battery operated alarm bell, LED

type emergency light, intercom suitable for hook up to EPABX, infrared ray sensing

door protection for full height, reverse phase relay on controller, fireman’s switch at

ground floor, ARD system and maintanance upto 1 year of sucessfull handover of the

Digital car positions indicator in car and at all positions indicator in car and at all

floors with Up/DOWN direction, all signal fixtures in stainless stell faceplates, light

fixtures, ventilation fan, etc complete with all accessories including automatic rescue

device in the event of power failure etc., Complete with necessary scaffolding,

electrical panel, logic control panel required for the erection of the elevators as

Machine Room Less (NSL) Type with the traction motor placed in machine room

at top (suitable for lift well size complete as per cpwd specification, simplex full

collective operation with/without attendant. Car/Hoistway Entrance, protected by

stainless steel Mirror polish doors and clear center opening min as per site. 10

Passanger Lift, suitable car size Inside dimensions and entrance at front side on all

the serving floors, provided with matt finish stainless steel panel on all four side

and ceiling, stretcher protection on three sides complete as per requirment. the lift

shall have to be with acessories for installign camera and should also have BMS

compatiable. the lift should be energy efficient.

08 stops & 08 openings ,Total travel height is approximately 40-45M, Speed 1.50

Machine Room Less (NSL) Type with the traction motor placed in machine room

at top (suitable for lift well size complete as per cpwd specification, simplex full

collective operation with/without attendant. Car/Hoistway Entrance, protected by

stainless steel hairline doors and clear center /side opening min as per site. 15

Passanger Service/Fire Lift, suitable car size Inside dimensions and entrance at

front side on all the serving floors, provided with matt finish stainless steel panel on

all four side and ceiling, stretcher protection on three sides complete as per

09 stops & 09 openings ,Total travel height is approximately 45-50M, Speed 1.00

Signature of Bidder 80 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Signature of Bidder 81 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

STACK PARKING BILL OF QUANTITIES

ITEM DESCRIPTION AMOUNT

S.NO. Item No. QTY INR)

Scope of Work In Figures

Supply & Installation of 2 Level Stack Parking System with Hydraulic based Technology

accommodating 2 Cars per module with car carrying capacity of 2000 kg on platform and Car

Dimension of 5000 mm length x 2000 mm height (SUV) at Ground level, with average

retrieval/parking time not more than 50 seconds. Power pack motor capacity of 1.5 KW, platform

thickness 1.5MM. Manufacturing standard; all welding should be TUV certified. One power Pack

connected to 5-7 Units

Having following safety features as

1. Mechanical locks at every 100MM from Ground to platform level.

2. Platform arrangement with support structure.

3. Mechanical locks at every 100MM from Ground to platform level.

4. All Hydraulic/Electrical pipe will be covered with pipe cover.

5. Hydraulic NRV value should be placed at ground level for easy rescue.

6. Chain Magnet Cover plate on each unit.

8. Tyre stopper

9. Vairous Platform Width as per site conditation i.e. 2100MM to 2400MM

10. Signage, electrical panel , earthing , channel, protction system etc. as required and approved by

Engineer In Charge

Supply installation testing commisioining complete etc. as required and approved by Engineer IN

Signature of Bidder 82 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

Maintenance office, Noida

Sr. No. Description Unit Qty Rate Amount

1) Maintenance Office

The Contractor shall construct site office (semi-permanent structure) for officers and staff as per the location

shown in the drawing attached with this BOQ, which should be equipped with all necessary equipment required

for functioning the office. The area of this office should not be less than 1000 Sqft with pantry, conference room,

toilets and other requisite facilities.

The office should have vitrified tiles in common areas and rooms with UPVC windows and laminated flush door

shutters. The toilet fixtures and specifications to be adopted as mentioned in this document for Office Block..

The Agency shall provide necessary Air Conditioners, lighting and fixtures, including all acessories to function an

office etc as required. The office furniture includes following items:

Articles Quantity

Executive table (wooden) with side racks Storage 1 Nos.

Executive Chair 2 Nos.

Visitor Chair for Executive room 2 Nos Job 1 1000000 1000000

2 Seater Sofa & coffee table 1 Set

Reception Table & Chair 1 Set

2 Single Seater Sofa & Peg Table 1 Set

Office Tables/ Workstation 7 Nos.

Office Chairs 10 Nos.

Steel Almirah for workstation area 3 Nos.

Conference table (for 8 seats) 1 Nos.

Conference chairs 8 Nos.

Conference Room Console 1 Nos.

Computer desktop with all necessary softwares etc. 5 Nos.

Colour Printer 1 Nos.

Black and white printer laserjet 1 nos.

Signature of Bidder 83 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

PROJECT: PROPOSED OFFICE BUILDING FOR THE FERTILIZER CORPORATION OF INDIA LIMITED (FCIL) AT

SECTOR -1, NOIDA, UTTAR PRADESH

SUMMARY OF PLUMBING WORKS

S. No. Description of Item DSR Amount

1 SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING) 1,41,447.75 25,33,664.00

2 SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES) 19,68,345.24 16,92,018.03

3 SUB HEAD - III - (WATER SUPPLY) 6,54,220.00 7,86,822.00

5 SUB HEAD - V - (SEWERAGE AND DRAINAGE) 8,99,878.88 1,26,941.00

6 SUB HEAD - VI - EXTERNAL WATER SUPPLY 2,67,635.35 1,80,438.00

TOTAL M.R. + DSR 92,51,410.25

Signature of Bidder 84 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

PROJECT: PROPOSED OFFICE BUILDING FOR THE FERTILIZER CORPORATION OF INDIA LIMITED (FCIL) AT SECTOR -1, NOIDA, UTTAR PRADESH

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

SUB HEAD - I - (SANITARY FIXTURES & INTERNAL

1 MR Providing, fixing, testing and commissioning of white vitreous china

wall mounted European water closet of size 355x585x410mm or

equivalent including providing & fixing CP bolts, nuts, anchor bolt

are required for hanging of WC, nuts, supporting arrangements,

bakelite/poly propylene seat & cover with CP hinges & rubber

buffers, WC pan connector (straight /offset type Macfit single body

push fit type WC pan connector with factory supplied spring loaded

seal guard with integral single mould sealing fins made of flexible

EVA body, including bush/adaptor for use with C.I. Pipe as supplied

with the pan connector) complete with all accessories. Including

cutting & making good the walls & floors wherever required.

Model:- JAQUAR (OPS-WHT-15951UF) or equivalent

2 MR Providing and fixing, testing and commissioning of concealed dual

flush type cistern with flow rate of 4/2 LPF comprising of actuator

button facia assembly including kombifix -designer line Tool free

series (chair bracket ,drainage pipe & wall mounting framing) brass

/ SS screws and washer complete, cutting and making good the

walls floors wherever required

Model:- JAQUAR (JCSWHT2400WS) or equivalent

Signature of Bidder 85 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

3 MR Providing, fixing, testing and commissioning of star white colour

vitreous china below / over counter Rectangular Wash Basin /

circular basin (Size 420x420x140 mm or as/architectural detail

drawing) with CP brass waste assembly complete including CI / MS

brackets duly painted, cutting and making good the walls floors

wherever required.

Model:- JAQUAR (OPS-WHT-15905) or equivalent

3.1 White Vitreous China Wash basin size 420x420x140 mm or

equivalent with a pair of 15 mm C.P. brass pillar taps 39 Each 5387.00 210093.00

4 MR Providing and fixing CP Brass 32mm size Bottle Trap of approved

quality & make and as per the direction of Engineer-in-charge.

Model:- JAQUAR (ALD-769L250x190) or equivalent

4.1 Bottle trap

5 MR Providing and fixing C.P. brass angular stop cock with wall flange

complete in all respect.

Model:- JAQUAR (OPP-15053PM) or equivalent 44 Each 682.00 30008.00

6 17.31 Providing and fixing 600 x 450mm beveled edge mirror of superior

glass (of approved quality) complete with 6 mm thick hard board

ground fixed to wooden cleats with C.P. brass screws and washers

complete in all respect. 39 Each 1283.05 50038.95

7 M.R. Providing and fixing unplasticised PVC connection pipe with brass

unions, 45 cm length.

7.1 15 mm dia nominal bore 53 Each 206.00 10918.00

Signature of Bidder 86 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

8 MR Providing and fixing CP liquid soap container Complete in all

9 M.R. Providing and fixing CP brass towel rail complete in all respect. 1 Each 1751.00 1751.00

10 M.R. Providing and fixing CP brass towel ring complete in all respect. 39 Each 648.00 25272.00

11 M.R. Providing and fixing toilet paper holder.

Model:- JAQUAR (AKP-35753PS) or equivalent

12 M.R. Providing and fixing CP brass twin coat hooks fixed on toilet

door/wall with CP brass screws, complete in all respect. 44 Each 442.00 19448.00

13 17.10 Providing and fixing stainless steel kitchen sink as per I.S.13983

with C.I brackets and stainless steel plug 40mm including painting

of fittings and brackets, cutting and making good the walls wherever

required complete in all respect.

13.1 17.10.1.3 Kitchen sink with drain board 510 x 1040 bowl depth 200 mm.

14 M.R. Providing & fixing of white vitreous china Janitor sink of size 450 x

300 x 150 mm deep supported CI/MS brackets duly painted, CP

cast brass bottle flange, union, CP brass chain rubber plug

complete as required. 6 Each 4520.00 27120.00

15 M.R. Providing, fixing, testing and commissioning of C.P. brass single

hole sink mixer with CP wall flange, swinging spout complete as

required and making good.

15.1 M.R. 15 mm nominal dia. 6 Each 3529.00 21174.00

Signature of Bidder 87 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

16 M.R. Providing and fixing C.P Single lever Shower mixer with spout for

bath and shower with Button at Top complete as directed by

Engineer‐in‐charge. 1 Each 4632.00 4632.00

17 M.R. Providing and Fixing Shower Head:

Over head Rose shower with revolving joint (with body rotation) &

115 mm long shower arm complete as directed by

Engineer‐in‐charge.

18 M.R. Providing, fixing, testing and commissioning of white glazed

vitreous china semi-stall lipped Urinal of size- 480x300x740mm CI

hangers CP spreader, 32/40 mm CP brass domical waste and pipe

to wall with CP flange, automatic flushing system with concealed

type electic operated, waterproof compact model solenoid valve

with built in strainer, flow control mechnaism, stainless steel outer

case, pre flush and main flush function and low battery indication,

for individual urinals to ensure flushing only when in use,

comprising of all plumbing & any other item required to provide

satisfactory functioning as approved by the Architects complete

including cutting and making good the walls and floors where

required. (The gap between fixture and wall to be filled up with

approved type poly sulphide sealant) Set of One urinal with flushing

Urinal flushing rate shall be maximum<=1 LPF

Model:- JAQUAR (URS-WHT-13255) or equivalent

Signature of Bidder 88 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

19 8.10 Providing and fixing stone slab with table rubbed, edges rounded

and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in

urinal partitions by cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with epoxy grout or

with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate 6 mm nominal size) as per direction of Engineer-in-

charge and finished smooth.

19.1 8.10.2 Granite Stone of approved shade 18 Each 3216.90 57904.20

20 M.R. Providing and Fixing, testing & commissioning of ABS Health

Faucet (complete with hook and flexible tube min. Length 1.0 m) as

required complete in all respect.

Health faucet flow rate shall be maximum<=4 LPF @ 3 bar

Model:- JAQUAR (ALD-577-GD) or equivalent

21 M.R. Providing & Fixing Aerosol Perfume Dispenser fixed to wall /door

with wooden cleats and C.P brass screws including cutting and

making good the walls wherever required complete in all respect.

22 M.R. Providing and Fixing, testing & commissioning of storage type water

cooler including angle valve and flexible connection piping of the

following capacity(including inbuilt RO System). It shall have C.P

brass push cock complete with inlet float valve (with angle valve)

with all plumbing and electrical accessories, inlet, outlet, overflow

and PVC drain out connection to F.D complete as required.

22.1 M.R. Storage capacity 80 Lts. 6 Each 105023.00 630138.00

Signature of Bidder 89 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

23 M.R. Providing and Fixing, testing & commissioning of position storage

type automatic electric water heater pressure/ non pressure type

thermostratically controlled, single phase, vertical/ horizontal wall

mounted of approved make ( to the approval of Engineer-in-charge)

with thermostats, inner container of stainless steel complete with 1

Mtr three core flexible cord with plug, non return valve and pressure

release valve complete including fixing and testing complete in all

23.1 25 litre capacity water heater 7 Each 7296.00 51072.00

24 M.R. Providing and Fixing, testing & commissioning of C.P. brass angle

valve for basin mixer and geyser points of approved quality

conforming to IS:8931.

24.1 15 mm nominal bore 53 Each 1069.00 56657.00

Handicap toilet :-

25 M.R. Providing and fixing of WB 46 x 36 with one pair mounting brackets,

EWC & Cistern complete with fittings & seat cover, one no. hinged

rail 76 cm & 4 nos. of grab rails 60 cm. 2 Each 25838.00 51676.00

Total Carried to Summary 141447.75 2533664.00

SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT

1 17.35 Providing and fixing soil, waste and vent pipes.

1.1.1 Cast Iron Hubless Pipes & Fittings as per IS:15905 50 Metre 859.55 42977.50

Signature of Bidder 90 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

1.2.1 Cast Iron Hubless Pipes & Fittings as per IS:15905 1310 Metre 1051.75 1377792.50

1.3 M.R. 150 mm dia.

Cast Iron Hubless Pipes & Fittings as per IS:15905 180 Metre 1265.00 227700.00

2 17.37 Providing and fixing M.S holder-bat clamps of approved design to

Sand Cast iron/ cast iron (spun) pipe embedded in and including

cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size)

including cost of cutting holes and making good the walls etc.

3 17.38 Providing and fixing bend of required degree with access door,

insertion rubber washer 3 mm thick, bolts and nuts complete.

3.1.1 Sand cast iron S&S as per IS-15905 26.2 Nos. 548.60 14373.32

3.2 M.R. For 150 mm dia. Pipe

Sand cast iron S&S as per IS-15905 3.6 Nos. 843.00 3034.80

4 17.39 Providing and fixing plain bend of required degree.

4.1.1 Sand cast iron S&S as per IS-15905 327.5 Nos. 343.90 112627.25

5 MR Providing and fixing heel rest sanitary bend.

Signature of Bidder 91 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

5.1 100 mm dia

5.1.1 sand cast iron S&S as per IS-15905 26.2 Nos. 275.00 7205.00

6 MR Providing and fixing double equal plain junction of required degree.

6.1.1 Sand cast iron S&S as per IS-15905 20 Nos. 607.00 12140.00

6.2.1 Sand cast iron S&S as per IS-15905 5 Nos. 1642.00 8210.00

7 17.43 Providing and fixing single equal plain junction of required degree

with access door, insertion rubber washer 3mm thick, bolts and

7.1.1 sand cast iron S&S as per IS-15905 104.8 Nos. 722.55 75723.24

8 17.44 Providing and fixing single equal plain junction of required degree

8.1.1 sand cast iron S&S as per IS-15905 66.81 Nos. 571.35 38171.89

8.2.1 sand cast iron S&S as per IS-15905 5.34 Nos. 1342.00 7166.28

9 17.47 Providing and fixing single unequal junction of required degree with

access door, insertion rubber washer 3mm thick, bolts and nuts

Signature of Bidder 92 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

9.1.1 sand cast iron S&S as per IS-15905 10.88 Nos. 916.55 9972.06

9.2.1 sand cast iron S&S as per IS-15905 2.98 Nos. 1482.00 4416.36

10 17.56 Providing and fixing terminal guard.

10.1.1 sand cast iron S&S as per IS-15905 21 Nos. 397.40 8345.40

11 MR Providing and fixing collar

11.1.1 Sand cast iron S&S as per IS-15905 60 Nos. 707.00 42420.00

11.2.1 Sand cast iron S&S as per IS-15905 436.6667 Nos. 327.00 142790.00

11.3.1 Sand cast iron S&S as per IS-15905 16.66667 Nos. 160.00 2666.67

12 17.59 Providing and fixing M.S. stays and clamps for sand cast iron /

centrifugally cast (spun) iron pipes of diameter :

13 17.6 Providing and fixing trap of self cleansing design with screwed

down or hinged grating with or without vent arm complete, including

cost of cutting and making good the walls and floors: (F.T. + U.T.)

Signature of Bidder 93 Signature of NBCC

Construction of office building for Fertilizer Corporation of India Ltd. (FCIL) at A-11, Sec - 1, Noida (UP)

ITEMS - PLUMBING

DSR Rate Market

Item no. DSR 2018 Description of Item Qty Unit Amount Amount

(Rs.) Rate (Rs.)

13.1 17.60.1.1 100 mm inlet and 100 mm outlet (Sand cast iron S&S as per IS:

14 17.65 Painting sand cast iron / centrifugally cast (spun) iron soil, waste