Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical GRAM NANEHA ASHA TEHSIL DEVBAND DISTRICT SAHARANPUR MOBILE 9927733433 | Accepted-Technical AS PER TENDER DOCUMENTS |
| 2 | Accepted-Technical | Accepted-Technical AS PER TENDER DOCUMENTS |
| 3 | Accepted-Technical | Accepted-Technical AS PER TENDER DOCUMENTS |
Tender Value
₹10.6 L
EMD Value
₹1.1 L
Closing Date
20 Apr 2026, 5:00 pmClosed
DDC RKUMPUP MEERUT
A3 DAMODAR COLONY GARH ROAD MEERUT
Repair work of Bitter Gourd Market Camp built on the first floor above the office building in the new flower and fruit vegetable market place in Noida.
2026_RKUMP_1130183_1
799/DDC Dt- 25.03.2026
Open Tender
Civil Works - Buildings
Percentage
60 days
Noida Mandi Noida
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,886
DDC RKUMPUP MEERUT
₹1.1 L
Yes
27 Apr 2026
28 Mar 2026
21 Apr 2026
28 Mar 2026
20 Apr 2026
28 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply & fixing of 4.5 cm thick C.P. teak wood part with fully panelled door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. SI-411 | |||||
| 2Distempering (First coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shede over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar deopping and other foreign matters and also sand papered smooth including supply of all materials, labour, tools & plants etc. required for proper completion of the work. SI 649 | |||||
| 312mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. (Chapter_13_Item_2) | |||||
| 4M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper competion of the work.' fixed panel SI 502 b-I | |||||
| 5Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. (Chapter_19_Item_2) | |||||
| 6Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore Chapter- (Chapter_23_Item_23) | |||||
| 7Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (Chapter_23_Item_25) | |||||
| 8Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore (Chapter- 23_Item_16) | |||||
| 9Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 15 mm nominal dia pipes (Chapter_ 23 _Item _1a) | |||||
| 10Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal dia pipes (Chapter_ 23 _Item _1b) | |||||
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.72 MB
BOQ_2109922.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .