Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹38.6 L+₹2.0 L (5.36%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹40.9 L+₹4.3 L (11.8%)Rejected-Finance H NO 279 SHAHEED NAGAR AGRA | AGRA | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹57.8 L+₹21.1 L (57.7%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹43.7 L
EMD Value
₹87,500
Closing Date
30 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Mathura
HQ CWE Mathura
As per Tender Documents
2022_MES_516324_1
CWE/MTR/BPR/ OF 2022-23
Open Tender
Civil Works
Item Rate
120 days
GE Bharatpur
As per NIT
7 documents required · 7 mandatory
₹500
GE Bharatpur
₹87,500
Yes
21 May 2022
2 Apr 2022
9 May 2022
2 Apr 2022
30 Apr 2022
16 Apr 2022
60 days
Amount
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft / loose soil complete all as specified and directed.
Scarifying or picking gravelled, macadam or bituminous macadam surface in area n exc 400 sqm & depth exc 50mm & n exc 100 mm all as specified and directed.
M&L 10cm thick (compacted thickness) WBM for disturbed portion of road with coarse aggregates (lime/sand stone, flint or quartzite) of grading one (90 to 40 mm size), spread, rolled and consolidated to gradient, camber and super elevation required to match with existing surface rolled with 8 to 10 tonne power roller applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required density complete all as specified and directed.
10cm thick (compacted thickness) WBM for disturbed portion of road (except material) with coarse aggregates (lime/sand stone, flint or quartzite) of grading one (90 to 40 mm size), spread, rolled and consolidated to gradient, camber and super elevation required to match with existing surface rolled with 8 to 10 tonne power roller complete all as specified and directed. Note : Material obtained from item No. 2 of this Sch 'A' shall be reused in this item.
M&L for applying evenly a tack coat with bituminous primer (Paving bitumen) VG-10 grade @ 10 Kg per 10 Sqm complete all as specified and directed.
M&L for preparing unsurfaced water bound macadam surfaces by brushing with steel wire brushes for removing caked / mud etc sweeping with brooms finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specefied and directed.
Preparing of existing black top surface by brushing with wire brushes for removing caked mud and bushes near road side etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc & applying evenly a priming tack coat with paving bitumen VG-10 @ 5 Kg per 10 Sqm complete all as specified and directed.
M&L for bituminous premix semi dense asphaltic concrete 40mm consolidate thickness with 5.5% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade as in filler material laid with mechanical paver rolled and compacted with 8 to 12 tonne power road roller to required camber and gradient complete all as specified and directed. Notes :- (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid / spread by means of mechanical paver. (ii) Filler for semi dense asphaltic concrete shall be Stone dust @ 2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 48.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items.
M&L for premix bituminous macadam with binder content @ 4 % of bitumen (Paving bitumen VG-30 graded) by the weight of total mix laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tonne power road roller complete all as specified and directed.
M&L for applying 2mm thick thermoplastic road marking compound of white/yellow of approved make, shade, for road marking of any width & girth & painting lines, dashes, arrows etc on bitumen road/pavement & on concrete surfaces using hot processor plant including removing old paint by paint remover of burning of blow lamps & cleaning with scrapers for removing all durt /dust & other foreign matters at site & managing traffic control etc complete all as specified and directed. Make: Apcotrack of Asian or equivalent in Shalimar/Berger lewis/Nerolac/Johnson & Nicholson.
S&F in repair road studs/cat eyes two way reflective panel amber or Red. Plastic body size 100 x 100 x 24 mm to give the maximum reflection whichenhances the visibility of the vehicles during dark and bad light condition complete all as specified and directed.
S&F in repair road studs/cat eyes two way reflective panel amber or Red. Plastic body size 132 x 122 x 12 mm to give the maximum reflection whichenhances the visibility of the vehicles during dark and bad light condition complete all as specified and directed. Make 3M or equivalient as approved by GE.
M&L Hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.
M&Lfor factory made machine pressed precast PCC solid block (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kerb stones of size as directed set in cement and sand mortar (1:4) complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade laid over and including sand cushioning not less than 25 mm thick and joints be filled with same sand complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in floor or paving and finish suface even and fair complete all as specified and directed.
Removing excavated soil / material to a distance exc 250m but n.exc 500m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed.
Rolling and consolidating formation surfaces with power roller Exc. 5 tonne and n. exc 8 tonne complete all as specified and directed.
Excavation in trenches in soft / loose soil rock not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick of soft / loose soil rock in trenches/pit complete all as specified and directed.
Removing excavated soil / material to a distance exc 250m but n.exc 500m and depositing where directed complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
Demolition of brick work or stone/bolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles and rubbish of premises complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks ( old size brick ) , straight or curved on plan exc 6 m mean radius , built in cement mortar (1:6) complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on other than fair face of brick walls/ concrete surfaces or on one side of lathing and finish surface fair and even complete all as specified and directed.
M&L for preparation of newly plastered surface and applying two coats of cement base paint of approved shade on walls complete all as specified and directed.
M/S MAMTA CONSTRUCTIONS
abhinav and company
Gupta Automobiles
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .