Day to day Complaints and Comprehensive maintanance and misc petty repairs to floor, plastering, joinery, plumbing, sanitary fitting, sunken flooring water proofing treatments and periodical services to OTM and Md Accn at 213 Transit camp UNDER GE NA

Amount

S & F in repairs, Fancy Type CP long body bib tap cast copper alloy with crutch or butterfly handle 15mm bore screwed down screwed for iron pipe (ISI marked) or equivalent as approved

S & F in repairs,Fancy type Bib tap, cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule (ISI marked) or equivalent as approved

S & F in repairs,Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 15mm-90 gms)

S & F in repairs,15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms

S & F in repairs,20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s.

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) PRAYAG (standard range) or equivalent as approved

Material and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails, cross sectional area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and as directed.

Supply and fix aluminium anodised snap grid ceiling of frame size 600 x 600mm, main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders complete all as specified and directed.

Supply and fix 6 mm thick non asbestos cement building boards ( Decorative E-Board), fixed to aluminium framework with screws in as ceiling complete all as specified and directed.

Rotational moulded polyethylene (three layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres all as specified in SSR Part-I.

All as per item No -10 here in before but 1000 litres.

S & F in repairs,15mm bore pillar taps (ISI marked), fancy type cast copper alloy with capstan head chromium plated screwed down high pressure

S & F in repairs,15mm bore CP brass angle stop valve/cock fancy type with long shanks and cup (concealed type) (ISI marked)

S & F in repairs,15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, and screwed both ends for iron pipe or for union. (ISI marked)

S & F in repairs,15mm bore CP brass stop cock (ISI marked) fancy type, chromium plated with iron shank and cup Concealed type

S & F in repairs,Waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 32mm bore.

S & F in repairs,Waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 40mm bore.

S & F in repairs,32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, PRAYAG (standard range) or equivalent as approved

S & F in repairs,PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete.

S & F in repairs,Wash basins, vitreous china white (flat back or angle back type) of size 550x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. Make : Cera/Parryware/Hindware.

S & F in repairs,Wash basins, vitreous china white (flat back or angle back type) of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed by Engr-in-Charge. Make : Cera/Parryware/Hindware.

Vitreous china squatting pan “Orrisa” pattern of size 580mm x 440mm “White” with integral foot rest & CI 100mm “P” trap (excluding flushing cistern and flush pipe) , connection to trap and to flushing pipe anti- syphonage pipe etc complete making good to floor including provn of glazed tiles complete all as specified and as directed by Engineer-in-charge

Stainless steel sink with drainage board made out of 1mm thick sheet for kitchen or laboratory with plug, washer, waste pipe etc including cast iron brackets, connecting union over all size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete

Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc complete all as specified and directed by Engineer-in-charge (including making good to floor and fixing in repairs)

S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device.

S & F in repairs,125 mm dia Fancy type shower rose with arm swivel type fixed to 15mm dia pipe all as spd.

15mm bore galvanized steel water tubing medium grade with all GI fittings (as union, tee, socket, nipple, elbow) including taking out old unserviceable pipes by cutting, screwing and altering the old pipe lines if any required at site including cutting chase, fixed in walls, ceiling and laid in floors complete all as specified and directed

All as per item No 46here in before but 20mm bore

Flush pipe of polyethylene of low or high density of PVC, 32mm dia for low level cistern fixed in repair

M & L for 12 mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed in wooden/aluminium frame work complete

S & F in repairs,125mm long safety type aluminium anodized hasp and staples complete

S & F in repairs,Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty

M & L for 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces

M & L for 19/20mm thick block board Grade I quality exterior grade, decorative type with decorative face veneers on one face for cupboard etc complete

M & L for 9mm thick plywood grade BWR type BB No of ply 5

M & L for Second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm complete all as spd.

Material only 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes all as spd

M & L for 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane

M & L for Wooden beading of teak wood, bull nosed ,chamfered or rounded fixed with screw to pre laminated board area exc 3 Sqcm and n.exc 6 Sqcm in section complete all as specified

S & F in repairs, 75 mm long Butt hinges, (ISI marked) medium weight cold rolled mild steel fixed with screws or welding fixed in repair including taking down shutter and refixing in same position

S & F in repairs, All as per item No 49 here in before but 100 mm long

S & F in repairs, Mild steel Helical door springs including roller plate complete of 150mm long

S & F in repairs, Floor door stopper 150MM of aluminium alloy body and tongue anodized with double rubber fixed in repair

M & L for, Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden/MS beads

Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed

M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough

Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as directed.

M&L of Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.

S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as spd and directed.

M & L for Glazed ceramic colored tiles 300mmx600mmx 6 to 7mm thick,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. including dismantaling/demolation/Taking down Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles

Glazed ceramic tiles coloured (Premier quality) in vertical surface of size 300mm x450 mm x 7mm thick jointing in neat cement slurry and pointing in colour cement to match including incl 10mm thick screed bed/bedding layers in cm 1:4

M & L for Virified Ceramic tiles 10 mmthick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm,as in patches in floors, set and jointed with cement slurry and pointed with white or coloured cement to match with tiles over and including 15mm thick screed bed in cement mortar 1:6 complete including dismantaling /demolation/Taking down Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles

M & L for 25 mm dia aluminium anodised dreproy rod powder coated teak wood textured finish and wall thickness 1mm complete designed and patterned as approved by Engr-In-Charge

S&F in repairs, CP brass mixer pillar cock 15mm bore with 02 Nos PVC connection all as directed by Engr-in-Charge.Make: L&K/Jaguar/Goldline

S&F in repairs, CP brass mixure for cold and hot water screwed down 15mm bore Make: L&K/ Jaguar/Goldline

Material and labour for repairing of PVC low level/high level flushing cistern by changing its internal fitting complete all as directed at site.

Supply and fixing in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site

Supply and fixing 125mm dia steel grating fixed in position complete

S & F in repairs, PVC cover/lid for PVC over head water tank suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity

Opening of air block/blockage of Gi pipe from outlet of water tank to all internal fitting to enable to smooth flow of water from bib tap/shower/WHB piller taps/stop cock complete by air pressure/water gravity pressure etc complete all as directed and specified.

Supply and fix for PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.

Supply and fix for factory made PVC door shutter 30mm thick (style) consisting of frame made out MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and as directed.

Supply and fix for factory made HDPE door shutter 30mm thick , HDF door shall be of Quality of Hihg Density Fiber (HDF) panel board doors includes High Quality Timber frame with machine filled Poly Urethane foam (PUF) core of minimum 45 Kg/Cum Density and 3.20 mm thick HDF facing layer, and jointed together with solvent cement complete all as specified and as directed.

Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Attending complaint for repair to easing of any type of Doors/window/cup board shutters incl Alu doors by tightening of hinges/handles/aldrop bolt/tower bolt/knobs, hasp and staple etc of any size/ any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including replacement of minimum defective item if required, complete all as specified and directed by Engr-in-Charge.

Petty repair to existing steel window/rolling shutters, pressed steel frame rat tails spring, steel almirah, mortise lock fitted in steel almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional (welding rod welding machine, small fittings such as windows handle, hinges etc will be provided by the contractor removing the steel window shutters from the frame and re-fixing after making serviceable complete in IHQ Camp and DGIS Area complete all as specified and directed by Engr-in-Charge.

Attending complaints related to plumber/ water supply and obtaining completion from user, this includes minor repair of taps by replacement of washer/jumpers, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc including materials like GI fittings of reqd size M.Seal, safeda, sootar and washers etc, (Replacement of taps, PVC connections/ face mohra's of any description & any other material shall be paid separately as supply only.)

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as spd and directed

Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles.

Brick work with sub class B (old size) brick straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified.

Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or conctete finished even and smooth without using extra cement all as specified.

Preparation of surfaces new plastered surfaces of wall incl and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-charge.

Dismantling Plin or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified

S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.

S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed of class VIII.

S & F in repairs Aluminium anodised handle extruded section and fixed of size 150mm all as specified and directed

Aluminium anodised barrel tower bolts extruded section and fixed in repairs of size 150 mm all as specified and directed

S & F in repair Floor door stopper of aluminium alloy body and tongue anodized with double rubber.

Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge including two coats of synthetic enamel paint over one coat of red oxide complete.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)

Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick

Preparation of old plastered surfces of wall and applying two coats of cement base paint over a coat of wall care putty 3mm thick

Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed

Preparation of old plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed

Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC bath room mirror cabinet fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and directed .

Supply and fixing 600mm x 750mm x 250mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement, complete all as specified and directed.

Supply and fixing soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as directed at site

Material and labour for repairing of existing floor trap by cleaning and refixing the same in cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate of size 100mm dia complete all as directed.

Cleaning of blocked WC/ bath rooms/ kitchen gully traps including and upto first manhole by removing all choked waste in the pipe complete all as directed at site

Opening of air block/blockage of Gi pipe from outlet of water tank to all internal fitting to enable to smooth flow of water from bib tap/shower/WHB piller taps/stop cock complete by air pressure/water gravity pressure etc complete all as directed and specified.

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m.

M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

Applying one coat of aluminium paint on top of APP membrane.

S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr.

PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed.

Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed

Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed

S & F 35mm thick plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as spd and directed (2nd class hard wood rail and stile) all as spd & directed.

S & F 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.2 (A) complete all as spd

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed

Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed

Aluminum anodized barrel tower bolt extruded section 150mm long

300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed

S & F in Aluminum anodized handles fabricated type of 150mm long all as specified.

Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately

Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS all as specified. Note:- Wire mesh and sheet glass shall be measured and paid separately

M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

18/19 mm thick solid PVC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed.

Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Make- Jinal Section,

M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..

M & L for 20mm thick screed screed bedding in cement mortar 1:4 as in sub base.

Chequered cement concrete tiles glossy finish coloured 20 to 22 mm thick of any size and pattern as approved by GE as in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over.

Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg aluminium extruded section body

Preparation of surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall incl cornices etc and applying one coat of white wash upto four storie build complete all as specified and directed by Engineer-in-charge.

All as per item No 133 here in before but applying two coats of white washing

All as per item No 133 here in before but applying one coats of white washing on ceiling.

All as per srl item No 133 here in before but applying one coat of cement base paint on walls.

All as per srl item No 133 here in before but applying two coat of cement base paint on walls.

All as per srl item No 1 33 here in before but applying one coat of oil bound distemper on wall.

All as per srl item No 1 here in before but applying two coat of oil bound distemper on wall.

All as per item No 133 here in before but applying one coat of exterior emulsion paint on plaster surfaces on chajjas/band/facia/balcony etc upto four storied bldg complete all as specified and directed Engineer-in-charge.

Complete removal of existing treatment from external surfaces (any number of coats) of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of oil emulsion distemper white or tined on wall upto three storie building complete all as specified. Note:- Shade of the OBD shall be approved by GE.

Complete removal of existing treatment from external surfaces of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of exterior emulsion paint with silicon based (first quality) on wall upto three storie building complete all as specified. Make:- Apex (Asian) or equivalent in approved make as approved by GE Note:- Shade of the paint shall be approved by GE.

Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.

Writing letters or figures (Block. Roman, Italic or Indian) exc. 15cm and n. exc. 30 cm high complete all as specified and directed

Preparation of previously treated wooden surfaces of any description not other wise described but not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Engineer-in-charge.

M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.

Preparation of Complete removal of existing trreatment preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick

Kalsi Engineers and contractors

Nitika electricals and engineers works

M/s Sunny Gupta

U K Engineering Works

AKSHAY CONSTRUCTION COMPANY

Bidder Name

Nitika electricals and engineers works

MAMTA ENTERPRISES

AKSHAY CONSTRUCTION COMPANY

U K Engineering Works

Kalsi Engineers and contractors

M/s Sunny Gupta