PROVN OF SECURITY WALL WITH ALLIED INFRASTRUCTURE AT AP AT SUNDERBANI UNDER GE (NORTH) AKHNOOR

Amount

Surface dressing n exc 15cm deep in any type of soil, complete all as specified & directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation, laying of pipes, fdn of poles etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth in any type of soil and getting out, complete all as specified and as directed.

Excavation in trenches not exc. 1.5m wide and exc 1.5m depth but not exc. 3m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5m in depth but n exc 3m in depth in any type of soil and getting out, complete all as specified and as directed.

Excavation over areas not exc. 1.5m deep in any type of soil and getting out, complete all as specified and as directed

Returning, filling in soil including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removal of excavated material (soil) to a distance n exc 50m and deposting where directed at a level not exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-charge.

Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete, all as specified.

Plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete for stays, complete, all as specified.

Walling of random rubble uncoursed ,well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and as directed. Note:- Quantity of PCC bond stone shall be deducted from the stone masonry work.

Hand packing with broken stone or boulders (any thickness) at back of walls/over arches etc. and raising (or lowering) to the required level, complete, all as specified and directed.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified.

PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in coping, kneelers, apex stones, bed plates, bed blocks and the like including weathering, slightly rounded or chamfered angles as directed including necessary formwork and finishing the exposed surfaces, complete, all as specified.

Precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone agg) as in bonders for stone walling and similar articles with plain faces, and set in cement mortar 1:6 complete all as specified and as directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm of lime or sand stone to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought to course, complete, all as specified and as directed.

PVC pipe (SWR) single socketed 110 mm bore in any length in wall for weep holes, complete all as specified and as directed.

PVC pipe (SWR) single socketed 75 mm bore in any length in wall for weep holes, complete all as specified and as directed.

Filling approved earth from inside defence land, laid in layers not exc. 30cm thick where directed, spread, levelled and rolled/rammed including watering in layers not exc 15 cm deep, complete all as specified and as directed. Note:- Cost of bringing earth is deemed to be included in Srl item No 6 of BOQ here-in-before.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for fair finished surfaces of concrete, complete all as specified.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregates as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and as directed.

Mild steel TMT steel bars 10mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified.

Mild steel TMT steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips, complete, all as specified

Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete, all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry, etc., any section, including taking out embedded portion and making good disturbed ground, complete, all as specified.

Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified and as directed

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified. (each line wire to be measured)

Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer, complete, all as specified.

Concertina coil 600 mm dia, 56 loops, 2.5mm core wire, heavy gavanised (wire-275 GSM & strip-200 GSM), tensile strength of wire-1400-1500 N/Sqmm, weight 6-8Kg/coil, (+5%) stretchable length- 6m to 8m including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete, all as specified and as directed. Make: M/S Global Engg/ M/S Special steels Ltd/ M/S Super Fence or other equivalent make as approved by GE Note: Weight per RM of concertina coil shall be ascertained by B.O.O to be appointed by the CWE.

Taking up or down steel water tubing and connection from existing wall/floor/roofs/tenches of size 20mm bore, complete all as specified and as directed.

Taking up or down steel water tubing and connection from existing wall/floor/roofs/tenches of size 25mm bore, complete all as specified and as directed.

Taking up or down steel water tubing and connection from existing wall/floor/roofs/tenches of size 40mm bore, complete all as specified and as directed.

Taking up or down steel water tubing and connection from existing wall/floor/roofs/tenches of size 80mm bore, complete all as specifed and as directed.

Cutting GI tubing for addition/alteration and screwing existing steel tubing of 20mm bore, complete all as specified and as directed.

Cutting GI tubing for addition/alteration and screwing existing steel tubing of 25mm bore, complete all as specified and as directed.

Cutting GI tubing for addition/alteration and screwing existing steel tubing of 40mm bore, complete all as specified and as directed.

Cutting GI tubing for addition/alteration and screwing existing steel tubing of 80mm bore, complete all as specified and as directed.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches or under roads, bore of pipe 20mm, complete all as specified & directed.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches or under roads, bore of pipe 25mm, complete all as specified & directed.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches or under roads, bore of pipe 40mm, complete all as specified & directed.

GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in trenches or under roads, bore of pipe 80mm, complete all as specified & directed.

Stop valves (ISI Marked) , cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc.,of bore 20mm, complete all as specifed.

Construction of brick masonary valve pit of size 1200mmx1200mmx1200mm (Internal dimension of chamber) with follwing specifications :- Pit shall be underground with foundation in PCC (1:3:6) type-C2 brick work in CM (1:6), internally finished with 15mm thick cement plaster in CM 1:4 and externally flushed pointed as work proceeds. Flooring shall be 40mm thick PCC (1:2:4) type B-1 laid over 75mm thick hardcore. Cover shall be of 6mm thick MS black sheet fixed to angle iron frame made out of 25x25x6mm by friction hinges welded to frame and sheet. Angle iron frame will be grouted on masonry chamber with MS hold fasts. Locking device will be provided to lock MS sheet cover to angle iron frame. One handle made out of MS round bar 12mm dia D type 15cm long shall also be welded on MS sheet cover. The steel surfaces exposed to view shall be painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and as shown in drawing No. CEUZ/TD/1500/15 sheet 1/1 dt 12.01.2015

Dismantling of existing unserviceable steel tubular poles any size embedded in concrete, transporting to MES store and stacking as directed by Engr-in-Charge. Note: The rate quoted by the contractor is deemed to include taking out pole from conrete, transporting to MES store and stacking as directed.

Dismantling of cross arms of MS channel or angle iron etc., complete all as specified & directed.

Taking down old unserviceable insulator of any type, shape & size, complete all as specified & directed.

Taking down old unserviceable stay assembly of any type, shape and size, complete all as specified & directed.

Dismantling of unserviceable earth wire, complete all as specified & directed.

Dismantling of unserviceable ACSR or AAC conductors , complete all as specified & directed.

Dismantling of unserviceable House service bracket, any type & size, complete all as specified & directed.

Dismantling and taking down unserviceable street light fittings of any size/wattage for replacement, complete all as specified & directed.

Dismantling and taking down existing unserviceable street light bracket GI of any size after disconnecting electrical connection, complete all as specified & directed.

Sand cushioning to underground cables in trenches/ducts 8cm thick before laying the cable and 15 cm after laying and stretching the cable and punned to 18cm thick, complete all as specified. Note: Only punned depth shall be measured and paid.

Sub class ‘B brick, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and directed.

Steel tubular swaged pole complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-22 (8.5m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with white and black paint alternately on external surface above PCC benching including numbering with black paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed (PCC, earth work shall be measured & paid separately under respective items).

45 Watt, lP66 LED street light luminaries comprising of Die cast aluminium housing with weather proof gasket of lamp and driver compartment with 120 degree view angle, lumen output > 100 Lum/ watt, lumen maintenance> 70 % at 50000 hrs, color temp 5000-6500K, CRI > 70, THD < 15%, PF > 0.95 and LM 80 test compliance. The driver must be integrated APFC with short circuit protection, reverse polarity protection against 5KV high surges and comply with IEC 60598-1, IEC-61000-3-2, IEC 61547. The luminaire must have secondary optics with perfectly matched lens for better light control with and including brackets made of GI pipe of 40mm dia light grade, bend to shape at an angle of 65 degree not less than 1.2mtr long with 2 Nos. of M.S clamp fabricated out of MS flat of size 50 x 6 mm on pole, including nuts, bolts, washers etc and making electrical connections, complete all as. specified and as directed. Make: Crompton Cat Part No. LSTP-45-CDL or technically and commercially equivalent models of makes as specified in Appendix É' to particular specifications.

Loop in/loop out cable, juntion/terminal box for cable connection made out with thermoplastic of size 200mm x 160mm x 98mm along with 200 Amp rated bus bar and MCB SPN 6 Amps 230 Volts with provn of external fastening with metric knockouts for cable entry & outgoing for service connection to security light complete, all as specified and as directed. Make: Sintex /Hensel/Universal switch gear control

PVC insulated round twin core miltistranded copper conductor 1.5sqmm for connection to street light from junction box fixed on poles, complete all as specified and as directed.

GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with and including clamps FI 50x5mm made to shape with 12mm dia bolts, nuts and washers where required, bore of pipe 40mm, complete all as specified.

GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with and including clamps of FI 50x5mm made to shape with 12mm dia bolts, nuts and washers where required, bore of pipe 50mm, complete all as specified.

GI tubing (light grade) with all fittings, laid in trenches or under road crossing as protection pipe, or fixed alongwith walls/poles with and including clamps of FI 50x5mm made to shape with 12mm dia bolts, nuts and washers where required, bore of pipe 100mm, complete all as specified.

Earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 15mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 15mm bore up to 5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed .

Earthing complete with galvanized steel earth plate electrode 600mmx600mmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level connected with galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with 40mm dia GI light grade protection pipe, 20mm dia GI medium grade watering pipe with funnel including charcoal, dust, salt, PCC M-15 type B1 in pit with angle iron (25x25x3)mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways and 12mm dia MS fabricated handle, test point etc. in and including light grade GI protection pipe 40mm bore up to 5m length for drawing in earth lead wire, all as shown in electric plate No. 3 of SSR Part-I complete with necessary earth work in any type of soil, removal to a distance not exc. 50m, testing on completion complete all as specified & directed .

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 150 Sqmm 3.5 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 95 Sqmm 3.5 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 70 Sqmm 3.5 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 50 Sqmm 3.5 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm 2 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm 2 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 6 Sqmm 2 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of 4 Sqmm 2 core with required aluminium cable lugs, fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board all as specified and directed. Note:- Earth work, brick protection and sand cushioning shall be measured and paid for separately.

Time switch Astro type (Having longitude and latitude of Indian cities in memory) 250 V, single phase of 25 Amp rating with contactor fitted in and including sheet metal enclosure, complete all as specified and as directed.

Feeder Piller Box 440 volt AC 3 phase, 4 wire for out door installation " KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e., CRCA sheet 3.15mm thick, angle/channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard with phosphatised powder coating painting externally and internally to protect against corrosion. The panel shall be mounted on suitable size of channel section having ground clearance 60 cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories :- (i) Bus bar chamber with electrolytic grade aluminium strip with heat shrinkable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating min 37.50 Amps (ii) MCCB 4 pole 415 V AC, current rating 25 Amps breaking cap 10 KA at 415 volts= 01 No (Incoming) (iii) MCCB 4 pole 415 V AC, current rating 16 Amps breaking cap 10 KA at 415 volts= 02 No (outgoing) (iv) MCB SPN 16 Amps, 230 V= 03 Nos for existing Guard Post.

Feeder pillar box 440 volt AC 3 phase, 4 wire for out door installation " KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e., CRCA sheet 3.15mm thick, angle/channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard with phosphatised powder coating painting externally and internally to protect against corrosion. The panel shall be mounted on suitable size of channel section having ground clearance 60 cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories :- (i) Bus bar chamber with electrolytic grade aluminium strip with heat shrinkable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating min 24 Amps (ii) MCCB 4 pole 415 V AC, current rating 16 Amps breaking cap 10 KA at 415 volts= 01 No (Incoming) (iii) MCB SPN 16 Amps, 230 V= 02 Nos.

LT switch gear control panel board 440 volt AC 3 phase, 4 wire for out door installation " KIOSK TYPE" with sloping canopy fabricated out of steel sections i.e., CRCA sheet 3.15mm thick, angle/channel and flat iron sections of suitable size with opening on front, door in two halves fitted with handle and bolts for pad lock. The panel door shutters fixed with stainless steel hinges, heavy duty and with door stoppers. The door opening shall not be less than 150 degree. The construction of panel board shall be dust, vermin proof, IP 54 standard with phosphatised powder coating painting externally and internally to protect against corrosion. The panel shall be mounted on suitable size of channel section having ground clearance 60 cms from grouting bolts, conforming to IEC 60 439 complete duly incorporated with following accessories :- (i) Bus bar chamber with electrolytic grade aluminium strip with heat shrinkable sleeves with colour code supported on epoxy resin based insulators 4 strip of suitable length for current rating min 60 Amps (ii) MCCB 4 pole 415 VAC, current rating 40 Amps breaking cap 16 KA at 415 volts= 01 No (Incoming)

(Srl item 76 contd) (iii) MCCB 4 pole 415 VAC, current rating 16 Amps breaking cap 16 KA at 415 volts= 02 No (outgoing) (iv) MCB SPN 16 Amps, 230 V= 02 Nos (v) Voltmeter digital type 0-500 V, 96mm square flush panel mounting =01 No ( on incomming supply) (vi) Ammeter digital type 0-200 A, with CTs of suitable ratio, 96mm squre flush panel mounting=01 Nos (on main load) (vii) Indication pilot light to operate on direct supply 230 V AC with 2.4 watt bulb (R, Y, G) with smooth lens=03 Nos (vii) On load changeover (manual type) of capacity 63 Amp=01 No (viii) Current transformer (bar primary low tension) type CBF-0.6-D1 ratio 60/5, 15VA accuracy class-1 = 01 No (Set of three) (ix) Complete wiring of panel board with FRLS PVC insulated multistranded copper conductor cables of suitable current carrying capacity end terminated with lugs and bolts, nuts and washers.

Cable jointing kit for 1100 Volts grade cable for straight through joints complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cables of size 70sqmm to 95 Sqmm, outdoor type including testing and commissioning, complete all as specifed & directed.

Provisional Sum : Provide a provisional sum of Rs. 65000 for items of earth work in hard rock. Note : 1. Work order for carrying out work for items of earth work in hard rock shall be placed upon the lowest bidder by the GE and shall be priced at rates given in SSR part-II, 2010 subject to contractor's percentage.

CREDIT SCHEDULE: Deduct credit schedule worth Rs 2,79,185.00 (Minus) as listed in Schedule À' Part-II. Note: Tenderers will not quote against this item being a firm amount at present. Contract Sum will be worked out after deducting the credit schedule amount during acceptance of tender.

M/S KAPIL KUMAR KHATTAR

M/s Sekinder Paul Sharma

Gupta Construction Company

M/s Khajuria Construction Co.

JR CONSTRSTRUCTION CO.

Mehar Enterprises

M/s Ravinder Kapoor Engineers and Builders

bamral builder

M/S Inderjit Sharma and Co.