Upgradation of Girls Hostel with modern kitchen equipments, dining, common room, interior and exterior painting in Government Mohan Kumaramangalam Medical College at Salem in Salem District

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls

Chipping of concrete & roughening the surface

Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs

Pressed tiles & weathering course

Clean removal of cement plaster from walls

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.

Earth work open excavation by manual means in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.- Mixing by manual means

Brick work in Cement Mortar 1:5 (one cement five CS sand using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.- For Third floor

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. For Ground Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

Finishing the top of roof with one course of machine pressed tiles of size 230x230x16mm to 18mm approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Pointing the top of roof with one course of machine pressed tiles of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with best quality Double charged vitrified Tiles of size 600x600x8mm and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Kota stone slabs of size below 600 x 600 of 20mm thick with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., complete complying with standard speicification and as directed by the departmental officers.(The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Supplying and fixing cost of wind appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Manufacturing, supplying and fixing of cupboard shutter using country wood (kongu) frame of 100 mm x 32 mm thick for outer frame horizontal and vertical memebers. The shutter frame of size 75 x 32 mm of country wood scantling (Horizontal 3 nos., Vertical 2 nos., of reach shutter) with 12 mm thick both side prelaminated particle board (exterior grade) shutter.The shutter are fixed to the frame with requied 6 nos., o alumium hings 100 x 30 mm 2 nos., 'D' type alumium hadle 100 mm 2 nos., of aluminum tower bolts 75 x 10 mm 2 nos., of cupboard lock etc., the country wood frame shall be painted two coats with synthetic enamel paint over one coat of wood primer. The prelaminated particle board and furniture fittings used should be got approved by the Executive Engineer before use on works. The cost is inclusive of alumnum handle. tower bolts, piano type hingers, screws, nails, and required further fittings and painting the frame and inner side of prelaminate shutter etc., complete complying with standard specification.

Supplying and fixing of Plain Glass of 5.50 mm thick and including cost of labour and materials etc.,

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing the following sizes of 65mm dia GALVANISED IRON PIPES of approved quality (B.CLASS PIPE) and conforming to I.S.I. specification

Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers.

Supplying and laying of Interlocking Paver Block Stone 60mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Finishing the Existing spalled concrete portion to chip the deboned cover of concrete to expose the damaged reinforcement to remove the correction by applying rust removing liquid to clean the rust released reinforcement 'NITO ZINC PRIMER' mxing 1 part SBR : 1 part of cement to apply a tacky bond coat of NITO BOND SBR LATEX' mixing at the rate of 1 part of SBR : 1 part Of water :4 part of cement over entire chip off surface which is to receive subsequent micro concrete 'RENDEROC RG' to 25mm to 40mm to finish the surface smooth using trowel cost includes cement sand all chemicals application labour tools and tackles transportation of material in etc., complete

Distempering the old wall and ceiling one coat with best oil bound distember of approved quality including preparation of surface, the rate includes cost of brushes, high scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental officers.

Painting the old wall two coats with approved weather proof Exterior Emulsion paint over on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.

Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a complete form using coir and nails 1m run.

Painting old wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 5.5mm thick mirror of Size :600 x 450 mm, Shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position best approved of BIS quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as directed by the departmental officers

Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level.

50mm dia

40mm dia

Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level.

32mm dia

25mm dia

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements

50mm dia Elbow

40mm dia Elbow

32mm dia Elbow

25mm dia Elbow

50mm dia Tee

40mm dia Tee

32mm dia Tee

25mm dia Tee

50mm dia Bend

40mm dia Bend

32mm dia Bend

25mm dia Bend

32mm x 25mm dia Reducer

32mm x 40mm dia Reducer

40mm x 50mm dia Reducer

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm dia

75 mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

110 mm Elbow

110 mm Elbow door

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Supplying and fixing of The Semi-Automatic Roti (Chapati) Making Machine , stainless steel unit designed for efficient and consistent chapati production. Manufactured in India, this machine features a robust 1 HP electric motor with a speed of 1440 RPM, operating on a single-phase power supply. It supports a chapati size range of 3 to 9 inches (76.2 mm to 228.6 mm) with a compact overall size of 12.192 cm, making it ideal for both small and large-scale food production environments. With a production capacity of 850 to 950 chapatis per hour, this machine ensures fast output without compromising quality. The silver-finished stainless steel construction ensures durability, hygiene, and ease of maintenance. Powered electrically and designed for semi-automatic operation, it offers a reliable solution for commercial kitchens, restaurants, and food processing units.

Supplying and fixing of Hard Top Deep Freezer is a high-capacity, convertible cooling appliance designed for efficient commercial use. With a total capacity of 563 liters, it falls into the 500 L & above category, making it ideal for storage-heavy environments such as supermarkets, restaurants, and cold storage facilities. This standalone, double-door freezer features a hard top design and is built with compressor-based cooling technology, offering a temperature range of -18°C to -24°C for optimal preservation of frozen goods. The unit supports a convertible technology, allowing flexibility in usage based on cooling requirements. It comes in a sleek white finish with a vertical refrigerator configuration and is manufactured by Rockwell Industries Limited in India. The model's compact dimensions of 262 x 666 x 370 mm further enhance its usability in constrained spaces while maximizing storage efficiency.

supplying and fixing of standard single-door refrigerator designed for commercial or high-capacity domestic use. Manufactured by Blue Star Ltd., this model features a sleek white exterior and adjustable shelves, offering both functionality and flexibility in storage. It uses a compressor-based cooling system to maintain consistent internal temperatures, ideal for preserving perishables. The refrigerator measures 61 cm x 61.5 cm x 179 cm and weighs 30 kg, making it compact yet spacious. It is equipped with one memory stick slot (if this refers to digital control or logging), and operates at a voltage of 28V, though this value appears unusually low and may require verification. The VC325D model is designed with an emphasis on durability, energy efficiency, and user convenience—suitable for a range of professional or household cooling needs.

Supplying and fixing of this premium multi-compartment refrigerator offers a total capacity of 598 liters, with 399 liters for fresh food storage and 199 liters for freezer space. Designed with user convenience and efficiency in mind, it features 4 compartments, 4 drawers, and 5 toughened glass shelves, all protected by an anti-bacterial gasket for improved hygiene. Among its standout features are an 83% convertible fridge space, a Magic Convertible Zone, Expert Inverter Technology, and Magic Cooling with Deo Fresh Technology for consistent and odor-free cooling. It also includes a Jumbo Ice Maker and an external digital display for easy temperature control. Additional user-friendly elements include stabilizer-free operation (compatible with 110V–300V), a recess handle, easy-clean back, vegetable and fruit box, two freezer boxes, big bottle guard, LED lighting, and auto-connect to home inverter during power outages. The refrigerator has dimensions of 905 mm (W) x 1775 mm (H) x 697 mm (D) and weighs 108 kg. Included in the package are the refrigerator unit, egg tray, and ice tray, ensuring a complete and ready-to-use cooling solution.

WORK BENCH:Size: 60”x24”x18”hThe base frame under the SS top is made of sturdy MS Angles and Bench top is made of 16 gauge 304 grade SS Sheet and mounted on SS Tubular legs with nylon bullet feet.

SS STORAGE RACK: 4 Tier Size – 44”x18”x66”hThe rack is made of 18 gauge 304 grade SS Sheet and mounted on SS tubular legs with nylon bullet feet.

Supplying and fixing of a High-quality 32-liter Bain Marie designed for efficient food warming and serving in commercial kitchens, buffets, and catering environments. Constructed with heavy gauge stainless steel, the unit features a durable stainless steel outer body and includes 7 GN pans—a combination of 8L (32.5 x 26.5 cm) and 4L (26.5 x 16.3 cm) pans, compatible with 1/2 150 mm or 1/4 150 mm GN pans. It operates on 220V / 50Hz power with a total consumption of 1200W, delivered through dual 600W heating elements. Measuring 114.5 x 37.5 x 25 cm (or 45.07 x 14.76 x 9.84 inches), the unit weighs approximately 24 kg and is ideal for countertop use. Simple to operate, the setup involves placing the unit on a stable surface, filling the pots with food, adding water for heat conduction,

This automatic sanitary napkin incinerator offers a quick, hygienic, and user-friendly solution for sanitary waste disposal, ideal for schools, offices, hospitals, and other high-traffic areas. Designed for automatic operation, the unit shuts off on its own once the burning cycle is complete, ensuring both safety and energy efficiency. With a high burning capacity of 600–700 napkins per day, and the ability to burn 30–35 napkins in a single cycle, it ensures fast and effective disposal. The compact and versatile design supports both wall-mount and floor-mount installation, allowing easy integration into various room layouts. Its universal compatibility means it can accommodate sanitary napkins of any size. Powered entirely by electricity, it eliminates the need for manual handling, and its simple, user-friendly interface makes it easy to operate, even in public or shared spaces.

Supplying and commissionoing of Industrial Heavy Mixi motor with cocount scrapper 2 - litre with electrical arrangement including cost of all materials, Conveyance and labour etc.,

Supplying and fixing the Idly Cooking Plant 240 Nos Cap and it is fabricated by 304 grade SS Sheet. The outer chamber and idly trays, are made of 1.25 mm thick and the inner chamber of 1.6 mm thick. It is fitted with all accessories viz., Automatic steam control system. this equipments has two independent chambers. Each chamber contains five numbers of idly trays with idly stand. One tray contains 20 numbers of iddlies the rate including cost of ss less. The rate including cost of all materials, Conveyance and labour etc.,

GAS PIPE LINE FITTINGS. Having cylinders (5+5) Manifolding system with D.B.C. Clicking on H.P.regulator,regulator Connector, shut off valves,unit valves,with frame Connector and the cost of 1/2” x3/4” M.S.’c’ class pipeline pin Set clamps,etc,including the charges for pipe bending,Welding,painting,pressure testing and all connected labour Charges.

Supplying and fixing of 8 seater Dinning table (full ss) attached with seat of table top frame 32 mm SS 304 Grade square tube and top by 1.25 mm SS 304 Grade Sheet packed with 6 mm plywood for reinforcement. Legs are 40 mm SS 304 Grade round pipe and cross pipe 32 mm round pipe with fixed shetter. Shetter by SS readymade plate of size 96" x 36" x 30" the rates are inclusives of loading, unloading, transportaions, etc., Complete complying with standard spefications., (2.40x0.90x0.75m)

Supplying and fixing of GYM equpiments inclludings Dumbells, Bench Press, Wall mounted bar, Helipitical Machine, Cycling Equpiments, Kettles, etc complete stanadard specifiactions

S SHANKAR BABU (BID ID -1408212)

Sudhir constructions (BID ID -1408235)