Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.1 Laccepted-aoc | ₹8.1 L | accepted-aoc |
Tender Value
₹9.7 L
EMD Value
₹24,175
Closing Date
25 Jun 2026, 11:00 pmClosed
Directorate of Municipal Administration
VIRUPAKSHI JE
Providing 5 HP submersible Pump Motor to Wells for supplying of water in w no 30 31 32 33 ballari city
DMA/2025-26/WS/WORK_INDENT56713/CALL-2
DMA/2025-26/WS/WORK_INDENT56713/CALL-2
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
DMA City Corporation Ballari
4 documents required · 4 mandatory
Banker Details
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2021-2022 to 2025-2026 Mandating satisfactory completion as a prime contractor for at least one similar work to an extent of 50percent of the cost of the work, for all works costing up to and Rs.100 lakh. Rs.4.83 Lakhs, wotk done certificate should include the tender indent number.
KPWD CONTRACTOR REGISTRATION CERTIFICATE
To qualify for award of this contract, each tenderer in its name should have in the last five years i.e. 2021-2022 to 2025-2026 Achieved in at least two financial years an average annual financial turnover of Rs.09.67 lakhs Certified turnover certificate issued by the Chartered accountant with UDIN Number
The contractor should have liquid assets and or availability of credit facilities of not less than Rs.2.90 lakhs Unconditional Credit line or Letter of credit or Certificates from Banks for meeting the fund requirement etc.,
₹500
₹24,175
25 Jun 2026
17 Jun 2026
29 Jun 2026
19 Jun 2026
Providing 5 HP submersible Pump Motor to Wells for supplying of water in w no 30 31 32 33 ballari city
MAINTENANCE WORKS :
Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers a...
Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump. 5 hp pump
Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x2.5...
Supply and delivery at site brand new best make starter/ control panel suitable for following HP centrifugal pump confirming with ISI mark and its latest amendments. Upto 7.5 HP centrifugal pump
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipments including providing cement concrete foundation bed etc., com...
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...
Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit.
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 o...
Supply and delivery at site delivery of best indigenous brand new MCB
(Miniature Circuit Breakers) of required capacity as per IS 88228/1978
and its latest amendments and with ISI Mark of 6/10/16/20/2...
gescom deposit charges ( receipts should be attached )
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
56713 kw1 others.doc
Tender Document • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .