Repair Maint of security perimeter and street light SMC box and allied works at HQ GNA INS Gmk Jeevanti NIH Comcen and BLO and Repair Maint of Internal Wiring Fitting and fixtures Distr Boxes INHS Jeevanti HQ GNA Gomantak BLO under GE Gomantak

Amount

Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition seperately) and making good disturbed surface of walls, floors etc complete all as per the existing finish.

Material and labour for point wiring for modular suitches or normal switches complete as specified with 1100 V grade 1.5 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS, drawn through and including PVC casing and caping on walls or PVC conduiton underground (ISI Marked) with all accessories fixed on surfaces of wall, ceiling, including sunk pressed steel terminal boxes made out of 2 mm thick MS sheet concealed in walls with 3 mm thick laminated Hylem sheet top cover fixed with brass screws for housing switches, socket, regulator etc including one run of 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for the following:-

(a) One light/fan/exhaust fan point controlled by one switch.

(b) One light point controlled by two Nos two way switches.

(c) One bell/buzzer point controlled by one bell push.

(d) One 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

(e) One 5 pin switch socket outlet 5 Amps on same board controlled by one switch.

Material and labour for point wiring complete as specified with 1100 V grade 4 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS drawn through and including PVC casing and caping (ISI Marked) with all accessories fixed on surfaces of wall, ceiling, including sunk pressed steel terminal boxes concealed in walls with 3 mm thick laminated Hylem sheet top cover including 4 Sqmm one run of single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for one 6 pin switch socket outlet 15 Amps on independent board controlled by one switch.

Supply and fix in replacement of switch piano flush type single pole, one way 5 Amp.

Supply and fix in replacement of switch piano flush type single pole, two way 5 Amp.

Supply and fix in replacement of bell push, flush type, 5 Amps.

Supply and fix in replacement of Switch socket combination 2 in 1, 3 pin, 5 Amp type universal

Supply and fix in replacement of Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Supply and fix in replacement of Socket outlet 2 in 1, 3 pin, 5 Amp .

Supply and fix in replacement switch piano, flush type, single pole, one way, 15 Amps, 2 fixing holes complete all as specified and as directed.

Supply and fixing in replacement socket outlet 2-in-1, 3 pin ,6 and 16 Amps, flush type, with 2 fixing holes complete all as specified and as directed.

Supply and fix in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as existing site reqd.

Supply & Fixing in replacement of modular switch 1 way 6A, 1 module, 230 volts.

Supply & Fixing in replacement of modular switch one way 16 Amps, 1 module, 230 volts.

Supply & Fixing in replacement of modular bell push 6 Amps, 1 module, 230 volts.

Supply & Fixing in replacement of modular socket 6 Amps-2/3 pin combined, 2 module.

Supply & Fixing in replacement of modular socket 6A/16A-2/3 pin combined, 2 module.

Supply & Fixing in replacement of modular Fan step regulator, 120W - 2 module

Supply and fixing in replacement 16 Amp & 6 Amp, combined unit box, with Switch Socket Combination, complete all as specified and as directed.

Supply and fixing in replacement 6 Amp, 2-in-1, Switch Socket Combination, with box complete all as specified and as directed.

Supply and fix in replacement of bell Ding Dong AC, 230 volts, single pole.

Supply and fix in replacement of ceiling rose, surface bakelite, 65x50 mm, two to three terminals complete.

Supply & fixing in replacement PVC casing capping, size 20 mm, including all fittings such as tees, bends and fixing clips and accessories etc complete all as specified and as directed.

Supply and fix in replacement of sheet metal enclosure (DB) for MCB's, 4 way, single pole and neutral, 240 volts, double door complete.Make : Legrand / C&S/Havells

Supply and fix in replacement of sheet metal enclosure (DB) for MCB's, 8 way, single pole and neutral, 240 volts, double door complete.Make : Legrand /C&S/Havells

Supply and fix in replacement of sheet metal enclosure (DB) for MCB's, 16 way, single pole and neutral, 240 volts, double door complete.Make : Legrand /C&S/Havells

Supply and fix in replacement of sheet metal enclosure (DB) for MCBs, 4 way, triple pole and neutral, 415 Volts, double door complete.Make : Legrand/C&S/Havells

Supply and fix in replacement of sheet metal enclosure (DB) for MCBs, 8 way, triple pole and neutral, 415 Volts, double door with 200 Amps rated bus bars with IP 54- IK 09 complete.Make : Legrand/C&S/Havells

Supply and fix in replacement of sheet metal enclosure (DB) for MCCB (Suitable for 160 Amps), vertical type,4 way, triple pole and neutral, 415 volts, double door with 200 Amps rated bus bar with IP 54- IK 09 double door as per site requirement. Make : Legrand (Ekinox 3) or equivalent in C&S/Havells

Supply and fix in replacement of sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps,C series 240 Volts complete.

Supply and fix in replacement of sheet metal enclosure tripple pole and neutral with a three pin and earth plug and socket complete with and including one four pole MCB 32 Amps,C series 240 Volts complete.

Supply and fix in replacement of sheet metal enclosure tripple pole and neutral with a three pin and earth plug and socket complete with and including one four pole MCB 63 Amps,C series 240 Volts complete.

Supply and fix in replacement of MCB, single pole,16 Amp to 32 Amp, 240 Volts, 'C' Curve 10KA. Make: Legrand /C&S/Schneider /Havells/L&T

Supply and fix in replacement of MCB, single pole and neutral, 32 Amp, 240 Volts, 'C' Curve 10 KA. Make:Legrand /C&S/Schneider /Havells/L&T

Supply and fix in replacement of MCB, single pole and neutral, 40-63 Amp, 240 Volts, 'C' Curve 10 KA. Make:Legrand /C&S/Schneider /Havells/L&T

Supply and fix in replacement of MCB, Triple pole , 40 Amp, 415 Volts, 'C' series 10 KA. Make: Legrand /C&S/Schneider /Havells/L&T

Supply and fix in replacement of MCB, Triple pole and neutral , 63 Amp, 415 Volts, 'C' series 10 KA. Make: Legrand /C&S/Schneider /Havells/L&T

Supply and fix in replacement of MCCB 100A,4 pole ,breaking capacity 25 KA Make: Legrand /C&S/Schneider /Havells/L&T (note: MCCB should be suitable for VTPN)

Supply and fix in replacement of MCCB 125A,4 pole ,breaking capacity 25 KA Make: Legrand /C&S/Schneider /Havells/L&T (note: MCCB should be suitable for VTPN)

Supply and fix in replacement of MCCB 160A,4 pole ,breaking capacity 36 KA Make: Legrand /C&S/Schneider /Havells/L&T (note: MCCB should be suitable for VTPN)

Supply and fix in replacement of MCCB 400A,4 pole ,breaking capacity 36 KA Make: Legrand /C&S/Schneider /Havells/L&T

Material and Labour in replacement of sub main wiring with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables two run of 4 Sq mm multi stranded copper conductor drawn through and including 25 mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 4 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 4 sqmm cable and one run of PVC Caping casing not less than 25mm width shall be measured as one run.

Material and Labour in replacement of sub main wiring with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables two run of 6 Sq mm multi stranded copper conductor drawn through and including 25/32mm mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 6 sqmm cable and one run of PVC Caping casing 25/32mm width shall be measured as one run.

Material and Labourin replacement of sub main wiring with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables two run of 10 Sq mm multi stranded copper conductor drawn through and including 32mm mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 10 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : Three runs of 10 sqmm cable and one run of PVC Caping casing 32mm width shall be measured as one run.

Material and Labour for sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four runs of 6 Sq mm multi stranded copper conductor drawn through and including 32mm mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : five runs of 6 sqmm cable and one run of PVC Caping casing 32mm width shall be measured as one run.

Material and Labour in replacement of sub main wiring (three phase) with single core 1100 V grade conforming to relevant IS, PVC insulated unsheathed cables four run of 10 Sq mm multi stranded copper conductor drawn through and including 32mm mm wide non metallic PVC caping casing incl all accessories fixed on walls/roof/floors/ceiling etc with an earth wire of one run 10 sqmm copper wire earth continuity conductor connecting to existing main switch board \ Distribution Board and testing on completion etc including taking down old submain wiring of any type with conduit/cpaing casing and making good disturbed surfaces to match existing all as specified and directed. Note : five runs of 10 sqmm cable and one run of PVC Caping casing 32mm width shall be measured as one run.

Supply and fixing in replacement of lamp holder(angle/batten holders), PVC/Polycarbonate type internally pre-wired with suitable size and testing complete all as directed by Engr-in-charge.

Supply and fixing in replacement of Surface mounted round LED 18W downlight for soft diffused lighting complete with all accessories internally pre-wired and including connecting up with twin core cable with suitable size.Make :Bajaj/Havells/Wipro/Philips.

Supply and fixing in replacement of recess mounted square LED 24W downlight for soft diffused lighting complete with all accessories internally pre-wired and including connecting up with twin core cable with suitable size.Make : Bajaj/Havells/Wipro/Philips.

S&F in replacement of LED surface mounted batten for LED T-8 tube fitting 4 ft suitable for 1x20w pre-wired and electric connections complete all as specified and directed.(Make - Havells / philips/CG)

Supply & Fixing in replacement of Recess mounting LED fittings 36 watts , suitable for 600 mm x 600 mm (2ftx2ft) modular/POP/Gypsum ceiling, luminaire with white powder coated CRCA housing with LEDs. seamless front frame with fat white high transmission acrylic cover 230V, incl taking down old fitting of any type. Bajaj/Havells/Wipro/Philips.

Supply & Fixing in replacement of Sleek round or square recessed mounting LED downlight of 15/18 Watts (Cut out dia size 170mm) with AL die-cast body, finish with drop down PC diffuser with driver complete incl and taking down old fitting of any type as per site requirement. Bajaj/Havells/Wipro/Philips.

Supply & Fixing in replacement of Sleek round recessed mounting LED downlight of 9/10 Watts (Cut out dia size 130mm) with AL die-cast body, and taking down old fitting of any type. Bajaj/Havells/Wipro/Philips.

Supply & Fixing in replacement of Sleek round recessed mounting LED downlight of 6/7 Watts (Cut out dia size 100mm) with AL die-cast body, and taking down old fitting of any type. Bajaj/Havells/Wipro/Philips.

Taking down and servicing of ceiling fan 1200/1400 mm sweep at site and removing of old grease from bearing of ceiling fan and re-filling new grease including replacement of worn out nut bolt/ washer, rubber real bush, canopy and reassembling the fan complete and hanging on its original/ new position as directed by Engr-in-charge.Note: MS nut bolts with spilt pin, Ball bearing and Gun metal bush will be paid and measured seperately.

Taking down and servicing / cleaning of exhaust fan 230 to 300mm sweep at site and removing of old grease from bearing of exhaust fan and re-filling new grease including replacement of worn out nut bolt, rubber real bush, gun metal ball bearing, capacitor, split pin etc and re-assembling the fan complete all as directed by Engr-in-Charge

Servicing / cleaning of Pedestal fan of any Size at site and removing of old grease from bearing of exhaust fan and re-filling new grease including replacement of worn out nut bolt, rubber real bush, gun metal ball bearing, capacitor, split pin etc and re-assembling the fan complete all as directed by Engr-in-Charge

Supply & Fixing in replacement of MS Nut bolts with split pin as per sample and as directed by Engineer-in-Charge.

Supply & Fixing in replacement of Ball bearing suitable size of ceiling fan / pedastal and exhaust-fan of any type and size

Supply & fixing in replacement gun metal bush suitable for ceiling fan / pedastal and exhaust fan any type and size including removing old one.

Supply & Fixing in replacement of Rubber bush & clamps for ceiling fan 1200/1400 mm all as existing make and model ceiling fan.

Taking down and opening the body cover of ceiling fan any type and make and cutting the existing worn out winding with out damaging the stator removing the coil insulation and putting new insulation of polyster paper, winding with super enameled copper wire of suitable gauge with correct number of turns of auxillary and main winding and varnishing and backing complete including soldering new lead of copper wire testing complete including transportation to work shop and back all as directed .

(a) Ceiling fans 1200/1400 mm sweep

(b) Exhaust fan Upto 230 to 300mm sweep

(c) Wall mounted fan300/ 400mm sweep

Material & Labour for Preparation of old painted surface of ceiling fan/Wall fan and applying one coat of synthetic enamel paint with spraying paint on machine including making MES number on body of the fan including taking down, refixing, connecting and testing complete all as specified & directed by Engr-in- charge.

Supply & Fixing in repair fan capacitor 2.5 mfd 240 V AC supply.

Supply & Fixing in repair fan capacitor 3.15 mfd 240 V AC supply.

Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, 26 Watt includung connection rod as per existing size of length of GI pipe medium grade including dismantling of old one and depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Supply & fixing wall mount fan 400mm sweep (ISI marked) 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 230mm sweep (metal body), heavy duty, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 300mm sweep(metal body), heavy duty, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 200 mm sweep plastic body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 250 mm sweep plastic body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Supply & fixing exhaust fan 300 mm sweep plastic body, 230 volts including dismantling of old one depositing in MES store yard as per specified and directed by Engr-in-Charge. Make : Usha/Havells/Bajaj

Taking down carefully storage type water heater (Geyser) of 25/50 litres capactity after disconnecting inlet/outlet/vent pipes, electric/earth connections etc cleaning of the body inlet/outlet/vent pipes stop cocks non return valves etc leakage arresting of inner copper/steel tank by welding/brazing etc reassembling the geyser by replacing gaskets worn out nuts washers etc refixing the same in position by replacing mounting bolts and nuts reconnecting all inlet/outlet/vent pipes electric/earth connections and carrying out testing for proper functioning all as directed by Engineer-in-Charge. Note : Parts will be measured and paid seperately.

Supply & Fixing in replacement of heating element of 1.5 KW/2.0 KW capacity of storage type water heater of compatible type including making all connections by replacing inter connecting copper conductor cables and removal of old unserviceable elements all as directed by Engineer-in-Charge.

Supply & Fixing in replacement of thermostat suitable for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge.

Supply & Fixing in replacement of cut out for 25/50 litre capacity storage type water heater including removal of old unserviceable ones as directed by Engineer-in-Charge.

Supply & Fixing in replacement of non return valve (gun metal) of size 16/20mm including removal of old ones all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement of CPVC SDR 11 fittings union of size 16/20mm dia bore including taking down old u/s GI union

Supply & Fixing in replacement of CPVC pipes 16/20mm bore SDR 11 and plain CPVC SDR 11 fitting on wall/ ceiling or laying on floors complete all as specified including taking out old GI pipe.

Supply & installed storage type water heater (Geyser) capacity 25 Ltrs(Vertical/horizontal) five star rating GMV type prefixing and grouting work for mounting nuts,bolts and washer etc in wall and reconnecting all inlet/outlet/vent pipees electrical/earthing connections and carrying out testing for proper functioning including dismantling of old geyser and deposited in MES store yard all as per directed and specified by Engr-in-charge. Make : Havells/Bajaj/Venus

Supply & installed Instantaneous type water heater (Geyser) capacity 03 Ltrs prefixing and grouting work for mounting nuts,bolts and washer etc in wall and reconnecting all inlet/outlet/vent pipees electrical/earthing connections and carrying out testing for proper functioning including dismantling of old geyser and deposited in MES store yard all as per directed and specified by Engr-in-charge. Make : Havells/Bajaj/Venus

Supply & Fixing in replacement of flexible pipe connection suitable size with brass chromium plated coupling nut and PVC washers on both ends complete for cold/hot water inlet/outlet lines for geyser.

Supply & Fixing in replacement of indicator lamp assembly complete for water heater (geyser) suitable to work on AC 230 V supply and to match the existing size any type including disconnecting and removal of old ones.

Supply & Fixing in replacement of copper tank (inner) of 50 ltrs storage type water heater conforming to IS 2082-1978 suitable for vertical or horizontal type heaters including removal of old tanks of capacity.

Supply & Fixing in replacement of copper tank (inner) of 25 ltrs storage type water heater conforming to IS 2082-1978 suitable for vertical or horizontal type heaters including removal of old tanks of capacity.

Supply & Fixing in replacement of flame proof 2X16/20 watt LED tube light fitting with IP65 protection complete with all accessories ,internally pre-wired including conecting up with suitable size three core FRLS copper conductor including taking down old fitting complete all as directed . Make: Crompton/Bajaj/Sudhir/Havells

Supply and Fixing of flame proof rotory switch in LM-6 enclosed in and including aluminium body enclosure with threaded cover with toggal action switch operated by a shrouded knob single pole, 10 Amps with double entries through way suitable for 20mm dia ERW threaded rigid steel conduit and 01 No MS plug of 20 mm including taking down of old fitting complete all as directed. dia . Make- Make- Crompton/Bajaj/Sudhir/Havells

Supply & Fixing in replacement of LED Panel driver suiatble for fitting of 15-24 Watts by taking out old unserviceable driver complete all as directed.

Supply and fixing Supply & Fixing in replacement of LED Panel driver suiatble for fitting of 9-12 Watts by taking out old unserviceable driver complete all as directed.

Supply & Fixing in replacement of LED Panel driver suiatble for fitting of 36/40 Watts by taking out old unserviceable driver complete all as directed.

Supply & Fixing in replacement of Decorative, wall mounting, brushed nickle finish fixture with opal glass diffuser suitable for 4/7 W LED lamp E14 /E27 base including lamp complete all as directed.Make code of Havells(LHFOAIC1TZ1I040) or equivalent in Jaquar (JNL-NKL-WLBPGG001E27)/Wipro/Luker

Supply & Fixing in replacement of LED inverter batten fitiing of 18/20W working on AC supply in normal mode and DC supply in inverter mode,with in built battery backup of upto 4 hrs ,high efficiency , high lumens output complete all as specified and directed. Make :Shakti/luker/C&S/Wipro/Crompton

Supply & Fixing in replacement of LED inverter bulb of 9/10W with base B22/E27 working on AC supply in normal mode and DC supply in inverter mode,with in built battery backup of upto 4 hrs ,high efficiency , high lumens output complete all as specified and directed. Make :Shakti/luker/C&S/Wipro/Crompton

Supply & Fixing in replacement of LED bulb of 2.7/3 watt 3000k thread or pin type candle bulb as existing model complete all as specified and directed.

Supply & fixing in replacement single core, copper conductor cable, PVC insulated, unsheathed, FRLS, 1100 Volt grade, flexible, 1.5 Sqmm size, multistranded complete all as specified and as directed.

Supply & fixing in replacement single core, copper conductor cable, PVC insulated, unsheathed, FRLS, 1100 Volt grade, flexible, 4 Sqmm size, multistranded complete all as specified and as directed.

Supply & fixing in replacement single core, copper conductor cable, PVC insulated, unsheathed, FRLS, 1100 Volt grade, flexible, 2 x 1.5 Sqmm size, multistranded complete all as specified and as directed.

Supply & fixing in replacement Two core, copper conductor cable, PVC insulated, unsheathed, FRLS, 1100 Volt grade, flexible, 2x1.5 Sqmm size, multistranded complete all as specified and as directed.

Taking down existing defective led street/security/flood/post top light fittings of any description and type from pole/ walls of buildings of any height complete, after disconnecting the electrical connections and re-fixing the same in position after replacement of defective parts and accessories including connecting up and testing for satisfactory functioning, complete all as specified and directed.

Supply & fixing in replacement high energy efficent constant current electronic driver suitable for 230v,50hz, LED street light fitting 30-45 Watts LED luminaires, complete all as specified and directed.

Supply & fixing in replacement high energy efficent constant current electronic driver suitable for 230v,50hz, LED street light fitting 60-72 Watts LED luminaires, complete all as specified and directed.

Supply & fixing in replacement high energy efficent constant current electronic driver suitable for 230v,50hz, LED street light fitting 90-150 Watts LED luminaires, complete all as specified and directed.

Supply & fixing in replacement surge protection device for outdoor LED fittings of 10KV complete all as specified and directed.

S & F loop in- loop out fuse junction (SMC) box of internal dimension 250 x 250 x 150mm made out of FRP sheet and locking screw fitted with and incl 0.5 Amps MCB - 1 No, 20 Amps rated 4 way connectors for 3 phase and neutral incoming/out going, mounted in the box, fixing on any type of poles including necessary clamps, suitable glands,Connector , lugs and GI nut and bolts including taking down old unserviceable junction box complete all as specified and directed.Make : Sintex/ Hensel/OBO/National

All as per item No. 104 here in before but internal dimension 140 x 140 x 95mm complete all as specified and directed. Make : Sintex/Hensel/OBO/National

Supply and fix in repair 40mm bore GI pipe bracket bent to shape drilled welded made out of light grade GI Pipe 1.2 mtr long for fixing of street light fitting of any type and description including suitable size of MS clamps, nuts, bolts & washers including two coat of aluminium paint over one coat of red oxide primer after taking down old serviceable one complete all as specified & directed. complete all as specified & directed.Note Clamps & nut bolts will be measured and seperately under respective item.

All as per item No. 106 here in before but 32mm dia bore GI pipe bracket complete all as specified & directed.

Fixing only LED Street lights of any wattage on pole/ walls of buildings of any height complete, after disconnecting the electrical connections of old UNSV fitting and re-fixing the new LED Street light fitting in position including connecting up and testing for satisfactory functioning, complete all as specified and directed. Note : Item will be issued by the department under sch 'B'.

Fixing only LED flood lights of any wattage on pole/ walls of buildings of any height complete, after disconnecting the electrical connections of old UNSV fitting and re-fixing the new LED flood light fitting in position including connecting up and testing for satisfactory functioning, complete all as specified and directed. Note : Item will be issued by the department under sch 'B'.

S&F PVC sheathed 1100V grade three core multistranded stranded copper conductor of size 2.5sqmm including PVC conduit pipe 20mm of size complete all as specified. Make: Havells/Polycab/Finolex/Plaza/Anchor

Supply and fix high density polyethylene pipes of pressure rating 6 kgf/cm2 ( HDPE) of size 20 mm bore having pressure rating 6kgf/sqcm. (for street light cable protection from SMC box to LED fitting)

Supply and fix Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 1022mm x 279mm at bottom,class 10 incl dismantling old UNSV pole of any typecomplete all as specified and directed by Enge-in-charge.

Supply and fix cross arms, bracing, supports clamps and back plates fabricated from steel sections including nuts, bolts, washers, welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing coat of paint all as direcetd by Engr-in-Charge.

Supply and Fixing in replacement of UG LT cable XLPE insulated armoured heavy duty 1100 volts grade with aluminium conductor multistandarded including centre gland, lugs, jointing materials etc laid in trenches or fixed it to wall including dismantling of existing cable of following sizes:-

(a) 50 sqmm 3.5 core

(b) 35 Sqmm 3.5core

(c) 25 Sqmm 3.5 core

(d) 16 Sqmm 4core

(e) 10 Sqmm 4core

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil .

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in Soft/disintegrated rock -

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil and soft/disintegrated rock.

Removal of excavated material soil/rockl to a distance not exceeding 50 m and depositing where directed by Engr-in-charge.

Supply and fix high density polyethylene pipes of pressure rating 6 kgf/cm2 ( HDPE) of size 50 mm bore having pressure rating 6kgf/sqcm laying in trenches for LT cables complete all as specified.

S & F solar street light standalone type of 30W with IP 66 Protection,LED Luminous Efficacy 120Lm/W,Color Temperature 6000-6500 K,Lithium Battery, 3.2V 18AH,Charging Time 6-8 Hrs,Backup Time 8-12 Hrs,Solar Panel 10V/20W , MONOCRYSTALLINE ,Rated Life > 30,000 Hours complete all as specified and directed by Engr-in-Charge.Make luker/Bajaj/Crompton/Havells

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I of 2009 complete all as specified and directed. NOTE :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I. (ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M.

Supply & Fixing in replacement of Earth continuity conductor fixed to wall /ground of size 25x4 nn GI strip as site requirement.

Supply and fix GI tubing (light grade) with all fittings,laid in trenches/road, or fixed along with walls /poles,bore of pipe 50mm .

Supply , Install & testing of CPRI approved OEM main LT panel outdoor type made of modular polycarbonate thermoplastic enclosures of suitable for maintenance space including MCCB , indicating lamp and other accessories which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4; The panel should be anti acid and anti corrosive .Degree of protection against mechanical load IK 08 (5 joule) in accordance with IEC 62262. The manufacture shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane. The panel should have bottom cable entry with MS legs of not less than 60cm height including necessary earth/PCC work . The manufacture shall submit a copy of TESTREPORT of board made out of polycarbonate thermoplastic panel in accordance with IEC 60439-1.The LT panel shall include the following:- Incomer -250A FP 25KA MCCB -1 No. Outgoing – 125A FP 25KA MCCB – 3 Nos & 63A FP 25KA MCCB-02 Nos LED RYB Indicating lamp, Ammeter with CTs, Voltmeter, 500A capacity BUSBAR. and including MCCB speders etc Make - Hensel / Schneider./Sintex/National

M& L for disconnecting electrical connections of faulty bollard lights of 9/12/15 watts and opening it to replace the burnt UNSV driver to make it functional complete all as directed and specified by Engr-in-Charge.Note: The rate quoted rate deemed to be inclusive of cost of driver 9-15 watts.

Demolition of cement concrete(unreinforced) in ground floors and pavings or around poles of any thickness (below or above ground level).

M&L for plain cement concrete (1:3:6) Type C-2 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete including necessary form work complete all as specified and directed.

M & L cement concrete type C1 , 1:3:6 (using 20mm graded aggregate) as in post hole and coping incl necessary form work all as specified and as directed.

S & F LED 9/12 W bollard light with cast aluminium housing & polymer diffuser including PCC block made up of concrete of 1:3:6 type C1 20mm grade aggregate set in cement mortor 1:4 for mounting bollard lights and nut bolts complete all as specified and directed by Engr-in-Charge..Make- Shakti/Bajaj/Luker/Crompton

S&F 12 W LED (WH/blue/Green) bush and spike light /outdoor garden light for rugged outdoor usage with IP 65 protection & all necessary fixing arrengement including connecting up with weather proof copper conductor cable of suitable size including taking out old bush light of any wattage all as specified & directed by Engr-in-charge. Make: Cat part No.LSSPK5W of luker or equivalent in CG/ Phillips/Crompton/Halonixluker/Crompton/Havells

S&F 20 W LED (WH/blue/Green) bush and spike light /outdoor garden light for rugged outdoor usage with IP 65 protection & all necessary fixing arrengement including connecting up with weather proof copper conductor cable of suitable size including taking out old bush light of any wattage all as specified & directed by Engr-in-charge. Make: Cat part No.LODSP20 of luker or equivalent in CG/ Phillips/Crompton/Halonixluker/Crompton/Havells

Supply & Fixing Heritage type LED POST Top lanterns with warm light made in cast aluminium spigot housing with decorative clear acrylic diffuser and IP65 protection complete with 40 W LED light including making necessary electric connection to the fitting with suitable size flexible copper cable and taking out old unserviceable fittings.

Fixing only aluminium landscape luminaires (bollard lights) any watts including PCC block made up of concrete of 1:3:6 type C1 20mm grade aggregate set in cement mortor 1:4 for mounting bollard lights and nut bolts complete all as specified and directed by Engr-in-Charge. Note : Item will be issued by the department under sch 'B'.

add Note in PS : a) Contractor have to make the arrangement for repairing of street light at any height by his vehicle/ladder/aerial lift arrangement upto 24hrs and in case of failure to above said repairing a penalty of Rs 200/- per day per street light is deducted from contractors due and of same once again is bonded to repair without any extra cost. (b) The cables will be collected by the contractor from GE Gomanatak Store yard and the rate for transportation and loading / unloading the cable is deemed to be included in the rate quoted .

Star Freeze Service

Heat Control

sapna enterprises

OM SAI ELECTRICALS

S and G Constructions

CVS CONSTRUCTIONS