REPAIR MAINT OLD DI GI PIPES AT DRONACHAL BHOPAL

Amount

Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth: for foundation etc or for manholes, laying of pipe lines,cables,pipes etc in any type of soil and getting out complete all as specified.

Returning filling in, including spreading, leveling watering & well rammng in layers not exc 25 cm thick complete all as specified and directed by EIC.

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & diected.

Taking out existing CI/DI pipe line, of any class including CI fitting with spigot and socket ends and lead joint including burning out lead joints recover in lead and to be relaying after cleaning / insertion of new CI pipes/CI fittings of any class/type of follwing sizes in safe condition for the following sizes :-

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

(e) 250mm bore

Refixing CI pipe including fittings with spigot and socketed end/ flanged end, centrifugally cast laid in trenches after cleaning internally and externally, drawing out forigen material/rust complete up to satisfaction of Engr in Charge of following sizes with and including new titon joint for fixing of pipe :- Note :- (i) Earth work , joints and CI Specials/fittings of the pipes shall be measured and paid separately under appropriate item.

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

(e) 250mm bore

Supply , laying and jointing DI iron pipes S/S class K 9 of standard length , internal cement mortar coating an external surface with bituminious paint of the following sizes ISI marked including nut bolt, packing material etc and making the joint leak proof complete all as specified and directed. Note :- (i) Earth work, joint and CI/DI specials/fittings of the pipes shall be measured and paid for separately under appropriate items of Schedule.

(a) 100 mm bore

(b) 150 mm bore

(c) 200 mm bore

(d) 250mm bore

S&F push on flexible rubber gasket (Tyton)joint suitable for following sizes :-

(a) 80MM bore

(b) 100MM bore

(c) 150MM bore

(d) 200 mm bore

(e) 250mm bore

Cutting of cast iron pipes in position for insertion of new tees , branches, etc for the following sizes complete all as specified and directed :-

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

(e) 250mm bore

S & F for CI/DI fittings i.e bend (any type, radius and angle) tapers any type, (straight bend including decreasing or double socket etc) Tee pieces single branch,'Y' junction, (all sockets or socket and spigot or flanged) collars, caps and plugs. for spigot socketed pipes Of upto 250vmm size.

M&L for run lead joint for spigot and socketed end CI pipe & fittings complete all as specified incl excavation, returning & refilling and directed by Engr in charge for following :-

(a) 80 mm bore

(b) 100 mm bore

(c) 150mm bore

(d) 200mm bore

(e) 250 mm bore

M&L for cocking of run lead joint for spigot and socketed pipes and fittings complete incl excavation, returning & refilling, all as specified and directed of following sizes :-

(a) 80mm bore

(b) 100 mm bore

(c) 150 mm bore

(d) 200 mm bore

(e) 250mm bore

Taking out,sluice valve top cover, repiaring of unserviceable spindle and unserviceable check nut by grinding, machining and putting extra material including complete lathe work and refixing of sluice valve parts after servicing including replacment of gland packing, rubber sheet, nut, bolt,Spindle ,check nut and washer of existing size complete all as specified and directed, of following size:-

(a) 80 mm bore

(b) 100 mm bore

(c) 150mm bore

(d) 200mm bore

(e) 250 mm bore

Taking out old UNSV Sluice valve & Supply and fix cast iron flanged sluice valve of class 1.6 PN, long body, ISI marked, conf to IS-14846 with stainless steel spindle and hand wheel including nut bolts, rubber gasket complete for installation of valve all as specified and directed by EIC of following size:

(a) 80mm dia

(b) 100 mm bore

(c) 150 mm bore

(d) 200mm bore

(e) 250mm bore

Taking up or down (from wall/trenches/floor) existing GI steel tubing and connections, including cleaning for refixing or removal to store of following sizes:-

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

Refixing of old steel tubing and connections in new or old position including cleaning internally and externally, any grade/make in trenches/wall/floor/ceiling including all type of new fittings i.e. sockets, Tee union elbow etc all as specified and directed of follwing size:-

(a) 80 mm bore

(b) 50 mm bore

(c) 40 mm bore

(d) 25 mm bore

(e) 20 mm bore

(f) 15 mm bore

S&F & laying only GI tubing medium grade ISI Marked with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed of following size:-

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

Drilling and taping cast iron water mains (in position) for branch connections for following size:-

Taking out UNSV Gun metal globe & S&F Gun metal globe or gate valves, conf to IS 778 with iron wheel head, screwed both ends for iron pipe and fixed in existing or new position for following size:-

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete all as specified and directed.

M&L for replacment of stainless steel splindle with check nut of existing type & size, including opening, grinding , threading , machning of gun metal gate, replacement of nut, bolt and washer including rubber sheet complete all as specified & directed for following sizes :-

M&L for painting of white/Red/Blue/Green painting on sump / wall/pipe etc in main filter pump House with synthetic enamel paint all specified and directed

Taking out old NRV and s& F new Flange type NRV of size 80 mm including nut bolt all connecting accessories all specified and directed.

Taking out old NRV and s& F new Flange type NRV of size 100 mm including nut bolt all connecting accessories all specified and directed.

Taking out old NRV and s& F new Flange type NRV of size 150 mm including nut bolt all connecting accessories all specified and directed.

Taking out old NRV and s& F new Flange type NRV of size 200 mm including nut bolt all connecting accessories all specified and directed.

Taking out old foot valve and s& F new flange foot valveof size 80 mm including nut bolt all connecting accessories all specified and directed.

Taking out old foot valve and s& F new flange foot valve of size 100 mm including nut bolt all connecting accessories all specified and directed.

Taking out old foot valve and s& F new flange foot valve of size 150 mm including nut bolt all connecting accessories all specified and directed.

Taking out old foot valve and s& F new flange foot valve of size 200 mm including nut bolt all connecting accessories all specified and directed.

Taking out old mechanical Joint and s& F new MJ DI type K12 of followng size including nut bolt all connecting accessories all specified and directed.

Day to Day Maintance GI pipe line various sizes for minor reparing/rectified and attending the complain of pipe line leakage/float valve reparing of size 15 mm to 50 mm by highly skilled trades man as required at site to complete job with stuiplated time without hampering water supply and making functional including all necessary T & P Complete all as specified and directed at site. Note : - (i) The quoted rate deems to exclude for all excavation & dewatering and new GI fittings of suitable size.(ii) The trades man shall report to E/M complaint cell of AGE E/M Dronachal daily at 8.30 am to take complaints from concern JE E/M . The complaint must be attended on same day in stuiplate time period by providing material required and by deploying sufficient manpower by the contractor. The complaint slip duly singned by the user shall be returened back at the complaint cell with proper feed back in the eveing.(iii) For urgent complaint must be come in holiday.(iv) New GI fittings of suitable size,Yarn & safeda/White lead paid and measured to be separetally .(v) Complaint slips & other stationary required for attending complaint shall be supplied by contractor without any extra cost to the departement.

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia.

(d) 40 mm dia.

(e) 50mm bore

S&F 25 mm GI socket

S&F 25 mm GI Elbow

S&F 25 mm GI Union

S&F 25 mm GI Tee

S&F GI reducer 25 x 20 mm

S&F GI Nipple 25 x 100 mm

S&F 20 mm GI Union

S&F 20 mm GI Tee

S&F GI reducer 15 x 20 mm

S&F GI Nipple 20 x 100 mm

S&F 15 mm GI Union

S&F 15 mm GI Tee

S&F GI reducer 15 x 25 mm

S&F GI Nipple 15 x 100 mm

S&F 20 mm NRV

S&F 25 mm NRV

S&F 15 mm NRV

S&F teflon tap

M/s logitech solution

SHIV SHANKAR MISHRA

PRAGATI ELECTRICALS AND ELECTRONICS

M/s H V Infra Projects

MODI CORPORATION

SUNIL ENTERPRISE

ROYAL CONSTRUCTION