Loading…
Loading…
Tender Value
₹5.3 Cr
EMD Value
₹4.1 L
Closing Date
8 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
DEN/I/TSK
25 conditions · 14 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited.
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Clause Regarding GST-(a) Tenderer should furnished their GSTIN numbers representing the States in which they are registered for GST, along with address of Registered Office, Place of business in State etc. (b) The contract is under GST act & rules as applicable time to time.(c) All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law.
Experience in similar nature of work- (a)The tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
( i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
ii) The total value of similar nature of works completed during the qualifying period and not the payments received within qualifying period alone shall be considered. (iii) It should be noted that credentials against the work executed for private organizations shall not be considered. The credentials against similar nature of work done certificate issued from Govt/Semi-Govt Organizations and PSUs are only acceptable.
(b)In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:
(i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note: Separate completed works of minimum required values for each component can also be considered for fulfilment of technical eligibility criteria.
(ii)In such cases, what constitutes a component in a composite work shall be clearly predefined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than 2 crore each
Note for Special Technical Criteria- Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/ last bill paid by company in support of above work experience certificate.
"No post tender correspondence will be done with the participant tenderer(s) for deficient credentials noted during scrutiny of tender/ offer nor any credential will be accepted after opening of the tender and the offer shall be decided on the basis of submitted/ credentials downloaded with offer only".
Similar nature of Work- " Any Building work or water supply or sewerage treatment works."
26 conditions · 6 needing a document upload
The tenderer/s shall submit a duly filled Tender Form (First Sheet) as Annexure-I of Section-VII of the Standard tender document.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following documents should be specified for submission along with tender:
A. List of Personnel, Organization available on hand and proposed to be engaged for the subject work.
B. List of plant Machinery available on hand own and proposed to be inducted own hired to be given separately for the subject work.
C. List of Works completed in the last three financial years giving description of work, organization for whom executed, approximate value of contract at the time of award, date of award and date of scheduled completion of work, Date of actual start, actual completion and final value of contract should also be given.
D. List of works on hand indicating description of work, contract value, and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor , a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement , receive money, witness measurements, sign measurement books , compromise, settie, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
The manual/offline mode of payment through Demand Draft, Bankers Cheque, Cash Deposit Receipt shall not be available against works tenders. The bidders will have to make all payments either through Net Banking, debit/credit etc. available on IREPS Portal. Fixed deposit Receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e-tender portal).
Tenderers intending to participate in the e-tender must make payment of the Cost of Tender Document and Earnest Money, online as per the provisions available in IREPS Works Tender Module.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The information should only be submitted in these standard formats.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
In addition to General condition of contract 2014 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax, Royalty etc. will be recovered as per extant instruction on the subject.
Note for Commercial compliance :-
In case of items C. and D. of Commercial Compliance, supportive documents/certificates from the organizations with whom they worked/are working should be enclosed.
Certificates from private individuals for whom such works are executed being executed is not acceptable.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
For Standard Financial criteria and Standard Technical criteria - Tenderers are required to submitted authenticated certificate along with the tenders from officers of government or semi- government/public sector undertakings under whom the work has been executed indicating there in the name of work executed, value of works/payment details and period during which completed. Such certificates should have signature and seal of the concerned officer. In the absence of such certificate the tender may not be considered.
Tender would close at the specified time and date. In case the specified date is declared a holiday, the Tender would close at the same time on the next working day.
At TSK Division- Balance work for Provision of drinking water with storage facilities and other miscellaneous works at way-side stations, colonies and LC gates under the jurisdiction of ADEN/SLGR.
01-TSK-ENGG-09-2026
01-TSK-ENGG-09-2026
Open
Works - General
12 Months
Tinsukia, Assam
₹0
₹4.1 L
8 Apr 2026
16 Mar 2026
25 Mar 2026
88 items across 1 schedule · ₹3,64,55,187.9 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 621 | 205.45 | 1,27,584.45 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 794 | 368.65 | 2,92,708.1 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 166.5 | 2,161.2 | 3,59,839.8 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 39.1 | 6,833.4 | 2,67,185.94 |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 52 | 6,326.05 | 3,28,954.6 |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 77 | 9,793.75 | 7,54,118.75 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 9.4 | 9,277.75 | 87,210.85 |
| 8 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm | 64 | 370.85 | 23,734.4 |
| 9 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. | Per bag of cement of 50kg | 197 | 57.15 | 11,258.55 |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 106.5 | 8,364.2 | 8,90,787.3 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 303.5 | 10,185.05 | 30,91,162.68 |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 646 | 307.95 | 1,98,935.7 |
| 13 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 774 | 669.55 | 5,18,231.7 |
| 14 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 881 | 766.55 | 6,75,330.55 |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 418 | 608.35 | 2,54,290.3 |
| 16 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 316 | 804.25 | 2,54,143 |
| 17 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 6 | 9,673.5 | 58,041 |
| 18 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 14871 | 89.65 | 13,33,185.15 |
| 19 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 39960 | 89.65 | 35,82,414 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 150 | 6,658.25 | 9,98,737.5 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 22 | 8,288.35 | 1,82,343.7 |
| 22 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 864 | 837.85 | 7,23,902.4 |
| 23 | Cement mortar 1:3 (1 cement :3 coarse sand) | Sqm | 813 | 1,043.1 | 8,48,040.3 |
| 24 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 74 | 1,018.05 | 75,335.7 |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 395 | 1,063.45 | 4,20,062.75 |
| 26 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 15 | 1,881.95 | 28,229.25 |
| 27 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 1010 | 197.7 | 1,99,677 |
| 28 | 100x58x1.90 mm | Each | 40 | 39.05 | 1,562 |
| 29 | 100x10 mm | Each | 13 | 58.65 | 762.45 |
| 30 | 125 mm | Each | 13 | 60.05 | 780.65 |
| 31 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 784 | 93.05 | 72,951.2 |
| 32 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 31564 | 111.95 | 35,33,589.8 |
| 33 | Using flats 30x6mm for diagonal braces and central cross piece | Sqm | 4.5 | 4,615.15 | 20,768.18 |
| 34 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | Kg | 566 | 175.65 | 99,417.9 |
| 35 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). | Kg | 249 | 114.65 | 28,547.85 |
| 36 | Hot finished welded type tubes | Kg | 6875 | 154.9 | 10,64,937.5 |
| 37 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 4 | 185.95 | 743.8 |
| 38 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 27 | 88.5 | 2,389.5 |
| 39 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 212 | 142.3 | 30,167.6 |
| 40 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 388 | 545 | 2,11,460 |
| 41 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. | Sqm | 167 | 928.65 | 1,55,084.55 |
| 42 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete. | cum | 19 | 7,958.65 | 1,51,214.35 |
| 43 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 28 | 935.6 | 26,196.8 |
| 44 | 0.80 mm thick with zinc coating not less than 275 gm/sqm | Metre | 11 | 811.85 | 8,930.35 |
| 45 | 110 mm diameter | Metre | 11 | 319.75 | 3,517.25 |
| 46 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 56 | 671.55 | 37,606.8 |
| 47 | Ridges plain (500 - 600mm) | Metre | 11 | 450.6 | 4,956.6 |
| 48 | 1:4 (1 cement: 4 fine sand) | Sqm | 1026 | 294.85 | 3,02,516.1 |
| 49 | 1:6 (1 cement: 6 fine sand) | Sqm | 2020 | 282 | 5,69,640 |
| 50 | 1:3 (1 cement: 3 fine sand) | Sqm | 807 | 374.15 | 3,01,939.05 |
| 51 | New work (three or more coats) | Sqm | 554 | 32.45 | 17,977.3 |
| 52 | New work (two or more coats) with a base coat of white washing with lime | Sqm | 805 | 44.25 | 35,621.25 |
| 53 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 45 | 162.55 | 7,314.75 |
| 54 | Two or more coats on new work | Sqm | 252 | 92.75 | 23,373 |
| 55 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm | 2090 | 97.6 | 2,03,984 |
| 56 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 50 | 144.9 | 7,245 |
| 57 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 149 | 140.05 | 20,867.45 |
| 58 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | Sqm | 13 | 55.5 | 721.5 |
| 59 | Two or more coats on new work | Sqm | 60 | 131.45 | 7,887 |
| 60 | Two or more coats on new work | Sqm | 13 | 121.45 | 1,578.85 |
| 61 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | Sqm | 1707 | 607.2 | 10,36,490.4 |
| 62 | Made of G.I. wire of dia 4 mm | Sqm | 162 | 859.5 | 1,39,239 |
| 63 | 60mm thick cement concrete paver block of M- 35 grade with approved colour, design & pattern. | Sqm | 67 | 932.35 | 62,467.45 |
| 64 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 62 | 2,040.85 | 1,26,532.7 |
| 65 | 510x1040 mm bowl depth 250 mm | Each | 62 | 6,008.45 | 3,72,523.9 |
| 66 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 674 | 254.95 | 1,71,836.3 |
| 67 | PN - 16 Pipe, 25mm OD (SDR-7.4) | Metre | 372 | 316.1 | 1,17,589.2 |
| 68 | PN - 16 Pipe, 20mm OD (SDR-7.4) | Metre | 70 | 213.9 | 14,973 |
| 69 | PN - 16 Pipe, 25 mm OD (SDR-7.4) | Metre | 1429 | 268.2 | 3,83,257.8 |
| 70 | PN - 10 Pipe, 50 mm OD (SDR-11) | Metre | 2512 | 568.6 | 14,28,323.2 |
| 71 | PN - 10 Pipe, 90 mm OD (SDR-11) | Metre | 2461 | 1,223.9 | 30,12,017.9 |
| 72 | PN - 10 Pipe, 110 mm OD (SDR-11) | Metre | 2651 | 1,689.5 | 44,78,864.5 |
| 73 | PPR Union 20mm | Each | 18 | 295.75 | 5,323.5 |
| 74 | PPR Union 25mm | Each | 30 | 362.65 | 10,879.5 |
| 75 | PPR Union 50mm | Each | 33 | 764.05 | 25,213.65 |
| 76 | PPR Union 75mm | Each | 96 | 1,687.2 | 1,61,971.2 |
| 77 | 15 mm dia nominal bore | Metre | 667 | 485.2 | 3,23,628.4 |
| 78 | 20 mm dia nominal bore | Metre | 150 | 541.1 | 81,165 |
| 79 | 25 to 40 mm nominal bore | Each | 62 | 757.1 | 46,940.2 |
| 80 | 50 to 80 mm nominal bore | Each | 24 | 1,513.7 | 36,328.8 |
| 81 | 15 mm nominal bore | Each | 186 | 303.85 | 56,516.1 |
| 82 | 15 mm nominal bore | Each | 124 | 303.85 | 37,677.4 |
| 83 | 25 mm nominal bore | Each | 154 | 532.35 | 81,981.9 |
| 84 | 50 mm nominal bore | Each | 51 | 878.25 | 44,790.75 |
| 85 | 80 mm nominal bore | Each | 47 | 2,227.6 | 1,04,697.2 |
| 86 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 55134 | 9.7 | 5,34,799.8 |
| 87 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 130 | 109.85 | 14,280.5 |
| 88 | 15 mm nominal bore, 98 mm long, weighing not less than 75 gms | Each | 33 | 96.45 | 3,182.85 |
| Schedule total | ₹3,64,55,187.9 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCACS11.pdf
ATTACHMENT
STDwithPVCNewon22.01.2025.pdf
ATTACHMENT
ArbitrationAdvancecorrectionslip10.pdf
ATTACHMENT
JPOofCablecutting.pdf
ATTACHMENT
Specialconditionprovisionofdrinkingwaterwork.pdf Tender document 4
ATTACHMENT
Tender document 5
ATTACHMENT
Specialconditionprovisionofdrinkingwaterwork.pdf
ATTACHMENT
ImplementationofContractore-MeasurementBookwithcorrectionslip.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .