PROVN OF CHAIN LINK FENCING AT GROUND NO-06 NEAR SDO QUARTERGUARD AT THE SIKH LI REGT CENTRE FATEHGARH AND PROVN OF 01 X SQUAD POST AT ATC TRG AREA AT RAJPUT REGT CENTRE.

Amount

M & L for surface excavation n. Exc. 30 cm deep and avg 15 cm deep and getting out soft and loose soil all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and directed.

Returning, filling in including spreading, leveving, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Excavating post holes in soft/Loose soils (or similar holes ) n exc 0.50 Cum each and getting out and returning filling in balance portion (after PCC filling Ref note given below) with boulder and mixed with earth in layers exceeding 25 Cm thick complete all as specified and directed

Removing excavated material exc 250 m but not exc 500 m and depositing where directed complete all as specified and directed

M&L for Hardcore of gauge n exc. 63 mm (using broken stone boulders), deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L for Cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling, post hole filling etc all as specified and directed.

M & L for cement concrete type D-2 1:4:8 (40mm graded stone aggregates) in foundation filling and mass concrete complete all as specified and directed

M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggt) as in kerb stone, coping and all other siilar works including necessary formwork etc complete all as specified and directed

M&L for Reinforced cement concrete type B-1, 1:2:4(20mm graded aggregate), Nominal mix in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M & L for Brickwork with subclass ‘B’ bricks (using old size brick work), straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

S&F Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc; half round or other stock section, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 Cm long but not exceeding 11 to 15mm dia of neck complete all as specified and directed.

S & F for MS TMT bars 10 mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Rolled mild steel Fe-410-W(Gde-E-250) quality-A in rolled sections as in main and cross beams, hip and jack rafters,purlins,posts where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

S&F Tubular post including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standerds, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

S&F for GI barbed wire 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm barbs at 75 mm spacing and shall confirming to IS-278-2001 & IS-280-2006 and straining and fixing to any type of standrad rails straining bolts including securing or tying at crosssing with and provision of Galvanized mild steel wire, staples or steel pins etc as directed complete all as specified and directed.

Supply and fixing mild steel in flat,round or square bars in available legth complete all as specified and directed

Supply only chain link MS galvanised fencing any size or type complete all as specified and directed. Note- (weight per sqm of chain link shall be decided through B.O.O)

S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L 75mm thick Cement concrete type B-1 , 1:2:4 (20 mm graded stone aggregate) as in flooring and similar finishing cement concrete surface without using extra cement even and smooth including necessary form work complete all as specified and directed

M&L 75mm thick Cement concrete type C-1 , 1:3:6 (20 mm graded stone aggregate) as in flooring, plinth proctection and similar finishing cement concrete surface without using extra cement even and smooth including necessary form work complete all as specified and directed

M & L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base all as specified and directed.

M&L for Glass dividing strips, 3 mm thick and 28 mm wide, inserted in position, conform to design complete all as specified and directed

M & L for two coat synthetic enamelled painting over a coat of red oxide primer, including prepartion of new steel surfaces of any description, not exc 10 cm in width or girth when unconnected with other work complete all as specified and directed.

M & L for two coat synthetic enamelled painting over a coat of red oxide primer, including prepartion of new steel surfaces of any description, over 10cm in width or girth,not otherwise described etc complete all as specified and directed.

M&L for laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of Newly Plastered surfaces and applying three coat of white wash on walls complete all as specified and directed.

M/S Arvind Electricals (BID ID -3133638)