Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹2.3 L+₹9,445.90 (4.20%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹2.6 L+₹34,933.90 (15.5%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Raj Engineering Co. L1 | paramount systems L2 | V.K. ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.01 | Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-ɸ, 415V, 50Hz, AC supply,Discharge: 250 LPM, Head: 84 mtr, Stage - 10. Make of Pump: BS/KSB/SU/As approved by DJB | 1 | Nos. | 38,600 ₹45,548 | 40,000 ₹47,200 | 35,000 ₹41,300 Lowest |
| 1.02 | Supply of Hut Type Feeder Piller Automatic LT Panel board suitable for 415 Volts , 3 phase , 50 Hz , 4 wire system for operation of up to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed , dust and vermin proof , floor mounted type .The panel size 760mmX1360X300mm and having 1)63 AMP Change over-1No.2)63 AMP TPN MCCB – 1 No.3) AMP. Meter 0-50 A-1No.4) Volt Meter-1No.5)Amp.& Volt Meter Selector Switches- 1 Set. 6) Auto Manual+ Light+ Control MCB SP 6 Amp- 1 No. each 7) CT-3Nos 8) push button +ON/OFF light-2nos each 9)5 KVR Shunt capictor-1No. 10) Aluminum Bus bar size 25 mmX6mm-1 set. 11)15HP Star Delta Starter a) 32 Amp power contactor -3No b) Over load Relay 14-23 Amps. 1 No. c) Star deltaTimer 1 No. d) QT Timer -24 Hours -1 No. e) Motor protection relay flush mounting with display with thermal O/L ,short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection 1 No. Make of accessories:-L&T/C&S/AE/as per DJB approved | 1 | Nos. | 44,500 ₹52,510 | 45,000 ₹53,100 | 40,000 ₹47,200 Lowest |
| 1.03 | Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 80 mm wide M.S.Plate for holding the Pipe of 50 mm dia. | 1 | Nos. | 900 ₹1,062 Lowest | 1,500 ₹1,770 | 1,800 ₹2,124 |
| 1.04 | Supply-Of G.I. Pipe 80mm dia, Medium-class, each of 3'' Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. | 20 | Nos. | 55,000 ₹64,900 Lowest | 72,000 ₹84,960 | 70,000 ₹82,600 |
| 1.05 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI | 1 | Roll | 13,000 ₹15,340 Lowest | 15,000 ₹17,700 | 25,000 ₹29,500 |
| 1.06 | Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 80 mm dia. Make of Pipe: Jindal / TATA. | 1 | Nos. | 960 ₹1,132.8 Lowest | 1,500 ₹1,770 | 2,500 ₹2,950 |
| 1.07 | Supply-Of G.I. Bend 90⁰ x 80 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange. | 1 | Nos. | 1,300 ₹1,534 Lowest | 1,500 ₹1,770 | 2,000 ₹2,360 |
| 1.08 | Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality. | 10 | Kg. | 1,100 ₹1,298 | 1,000 ₹1,180 Lowest | 1,200 ₹1,416 |
| 1.09 | Supply-Of Rubber-packing for 80mm dia Flange. | 25 | Nos. | 775 ₹914.5 | 750 ₹885 Lowest | 750 ₹885 Lowest |
| 1.10 | Supply-Of Bore-Cover Plate of Size: 300 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 80 mm dia in center with Locking arrangement by Nuts & Bolts. | 1 | Nos. | 1,350 ₹1,593 Lowest | 1,500 ₹1,770 | 2,000 ₹2,360 |
Tender Value
Refer Docs
EMD Value
₹6,700
Closing Date
19 Aug 2025, 11:15 amClosed
Executive Engineer EnM M VI
DELHI JAL BOARD Office of the Executive Engineer (ENM) M-VI MU BLOCK, PITAMPURA, New Delhi-110034
SIC of re bore tube well at E block JJ colony wazirpur in AC 17
2025_DJB_276703_8
E-NIT No.11 / (EnM) M-VI/ 2025-26
Open Tender
Miscellaneous Works
Works
30 days
EE ENM M VI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
Account No SB 50448339804
₹6,700
Yes
23 Aug 2025
12 Aug 2025
19 Aug 2025
12 Aug 2025
19 Aug 2025
12 Aug 2025
Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-ɸ, 415V, 50Hz, AC supply,Discharge: 250 LPM, Head: 84 mtr, Stage - 10. Make of Pump: BS/KSB/SU/As approved by DJB
Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 80 mm wide M.S.Plate for holding the Pipe of 50 mm dia.
Supply-Of G.I. Pipe 80mm dia, Medium-class, each of 3'' Meters Long, duly threaded on both-ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA.
Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 6.0 sq mm. size in 100mtr. Roll. Make: Finolex / Havells/CCI
Supply-Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 80 mm dia. Make of Pipe: Jindal / TATA.
Supply-Of G.I. Bend 90⁰ x 80 mm dia, having Flange at both-ends One side M .S. Flange and other side G.I flange.
Supply-Of Nut-Bolts, ½” dia of different size i.e. 1.5” & 2.5” Long, threaded of good quality.
Supply-Of Rubber-packing for 80mm dia Flange.
Supply-Of Bore-Cover Plate of Size: 300 mm dia, made out from 6 mm thick M.S.-Sheet in 2-Halves and a Circular-Hole of 80 mm dia in center with Locking arrangement by Nuts & Bolts.
Supply-Of Orifice-Assembly 80mm dia, 0.6 Meter Long, Double-Flange. One side M .S. Flange and other side G.I flange.
Supply of CI DF Non Rising spindle sluice valve PN 1.0 / IS:14846 CI body/wedge/bronze rins/SS/l410 Shaft construction of size: - 80 mm.Make: Kirloslar/IVC
Supply-Of C.I. D/F swing-type Non-Return Valve, as per 1S:5312 (Part 1 & 2) PN 1.0, 1S:14846, C.I. Body door of size: 80 mm dia.Make: Kirloskar /IVC
Installation of submersible pump and all allied electrical & mechanical accessories by lowering of submersible pump-set adjoining with pipes by tightening of nut-bolts on flanges welded on GI pipes. Laying of delivery system with sluice valve and NRV. Lowering of pump-set and pipes will be carried out with help of heavy labour, chain pulley hanged on either with tripod or Hydra.
paramount systems (BID ID -1612872)
V.K. ENTERPRISES (BID ID -1612291)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .