SPECIAL REPAIR TO BUILDING NO E2 AND P113 LPG SHED AT 373 I SUP PL ASC AND CONSTRUCTION OF ARTIFICIAL RECHARGE PIT FOR RAIN WATER HARVESTING IN PC WING, PROVN OF POND AS PART OF ARTIFICIAL RECHARGE STRUCTURE FOR RAIN WATER HARVESTING IN PC WING

Amount

Dismantling existing u/s timber in fillets, rails, posts, rafters, purlins etc., under 40sq.cm in section, in any position, complete all as specified and as directed.

M&L for Preparing surface of wood and wood based materials, new or old, of any description and girth and treated with two coats of creosote oil, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s AC sheet roof of any description, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s AC sheet roof of any description, complete all as specified and as directed.

M&L for Rolled Mild steel as in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc., conforming to grade Fe 410-W Gde E - 250 quality 'A', complete all as specified and as directed.

M&L for Rolled Mild steel as in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc., conforming to grade Fe 410-W Gde E - 250 quality 'A', with and including distantling existing steel work of any description, complete all as specified and as directed.

M&L Framed work such as grills, gratings,etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railings, and similar work confirming to Gde Fe-250 Gde-165,with and including distantling existing steel work of any description, complete all as specified and as directed.

M&L for PCC type B0 [1:2:4] using 12.50mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, complete all as specified and as directed.

S&F Aluminium Composite Pannel board of 4mm thick, comprising of a core containing not less than 70% non combustible mineral filling, sandwiched between two skins of 0.50mm thick aluminium alloy PERALUMAN-100 of weight not less than 7.6kg/Sqm, with all sub structures, anchors, hardware and all fittings, fixed over and including aluminium section of size 35x25x2mm and 1.0m x 0.30m panel with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified.

M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work.

S&F 150mm bore PVC (SWR) Pipe as in eaves gutter half square / half round, with and including fittings, head shoes, swan neck etc., and taking down existing gutter of any description, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, fixed to wall with brackets, and taking down existing rain water pipe of any description, complete all as specified and as directed.

M&L for applying two coat of white wash on walls with and including preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes, cracks with cement base putty, complete all as specified and as directed.

M&L for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, with and including preparation of old decorated surfaces of wall, complete all as specified and as directed.

M&L for Machine cut Kota stone slab 18-20mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor tiles of any description, complete all as specified.

S&F Machine cut kota stone slab 18-20mm thick, as in vertical surfaces such as skirting/dado, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing skirting/dado, complete all as specifed and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint with and including preparation of old painted steel and steel based surface of any description exceeding 10cm width or girth, complete all as specified and as directed.

S&F IN REPAIR Galvanised mild steel wire cloth, 0.56mm dia of wire and average width of aperture 1.18mm and fixed with galvanised steel wire staples, and including 2nd class hard wood beads straight (any size) for glazed or gauged joinery, renewed including mitrted etc and painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

S&F Stainless steel wire netting mesh of size 12mm with stainless steel wire 1.4mm dia fixed with tinned tacks of SS wire staples, with and including painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.

M&L for Greasing and easing in position of mild steel rolling shutter of area not exc 10SqM each, for movement and for easy operation of shutters, complete all as specified.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete etc., complete all as specified and as directed.

S&F Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc., confirming to Gde Fe 410-W (Gde-E-250 quality - A) complete all as specified and as directed.

M&L Moorum/red bajri filling brought from out side MD land including filling, spread, levelled in layers not exc 15cm thick and rammed including watering, for all leads & lifts, complete all as specified and as directed.

M&L for Hardcore of gauge not exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe290 Gde Fe-165, with and including dismantling of structural steel work of any description and in any position, complete all as specified and as directed.

S&F MS Flat iron of size 25x3mm thick as in hold fast and similar small article conforming to Fe-290 Grade-E-165, complete all as specified and as directed.

Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed.

M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and no pigment, with and including 50mm thick river sand cushion under interlocking paver block with watering and consolidation, with and including demolition of existing floor tiles of any type, complete all as specified and directed by the Engineer-in-Charge.

S&F Mild Steel work as in wind ties etc. conforming to Fe-290 Gde- E-165. complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Providing precast cement concrete (RCC) 1:2:4 type B1 (using 20mm graded granite stone aggregate) as in lintels upto 1.5m clear span, cills, steps, and similar articles set in CM 1:4, finished plain fair faces, including necessary formwork etc., complete all as specified and as directed. Note: Necessary reinforcement shall be measured and paid separately.

M&L for Reinforcement using TMT bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for Reinforcement using TMT bars of Grade Fe–500D of 6 to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M&L for Rendering 15mm thick on new fair faces of concrete surfaces of any description in CM 1:4 finished even and fair without using extra cement, complete all as specified and as directed.

S&F IN REPAIR 2mm thick Fibre glass reinforced translucent corrugated sheet, with two corrugations side lap as in roofs, fixed with J or L type hooks or coach screw & washer or cranked hook bolts as per site requirement, with and including dismantling existing u/s roof sheeting of any size as in roof coverings, complete all as specified and as directed.

Surface excavation n. exc. 30cm deep and averaging 15cm deep and getting out in any type of soil, including removal of the rubish upto 50m, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil, for foundation etc., complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20mm graded stone aggregate) exc 10cm width and setting in CM 1:6, complete all as specified and as directed.

M&L for Rendering 10mm thick on new fair faces of brick or concrete surfaces of any description in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed.

M&L for Rendering 10mm thick on new fair faces of brick or concrete surfaces of any description in CM 1:4 finished even and fair without using extra cement with and including mixed with water proofing compound @2% of weight of cement, complete all as specified and as directed. Note: Quoted Rate shall be inclusive of water proofing compound.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.

M&L for Factory made Machine pressed pre-cast concrete interlocking paver block any shape and size with glossy finish on top, confirming to IS 15658-2006 of 80mm thick, M-40 grade with grey cement and no pigment, with and including 50mm thick river sand cushion under interlocking paver block with watering and consolidation, complete all as specified and directed by the Engineer-in-Charge.

M&L for 100mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10Sqm on plan) not exceeding 1.50 m in depth and including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as in all kind of soil, complete all as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10Sqm on plan) exceeding 1.50m but not exceeding 3.0m in depth and including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as in all kind of soil, complete all as directed by Engineer-in-Charge.

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30cm in depth, 1.5m in width as well as 10Sqm on plan) exceeding 3.0m but not exceeding 4.5m in depth and including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as in all kind of soil, complete all as directed by Engineer-in-Charge.

Forming embankments [using Soil obtained from excavation] including raising (or lowering), earth, spreading in layers, not exceeding 30cm thick, watering, ramming / rolling and finishing to required size and shape etc., not exceeding 1.5meter high from the starting point/base in soil, complete all as specified. Note: Measurements of the finished embankment, traverse of earth filling shall be taken after consolidation and 10% deduction shall be made to allow for increase in bulk irrespective of machinery used for ramming.

M&L for Broken Stone Boulder pitching, hand packed tightly, grouted with cement and sand mortar 1:6, including dressing the stones to the required size and shape as required, complete all as specified and as directed.

S&F Black HDPE Geocell geogrid of 75mm thick for soil stabilization, three-dimensional honeycomb shaped cellular confinement system, including levelling the surface before laying, filling & levelling, fixed all as per manufacturers instructions, complete all as directed by Engineer-in-Charge.

M&L for RCC M–25 (Nominal Mix) with using 20mm graded stone aggregate, as in cast in situ cover slabs supported on walls, retaining walls, abutments etc., complete all as specified and as directed.

Steel formwork to soffits of suspended slabs such as floor or roof slabs, landings and similar works not exceeding 200mm thick, horizontal or sloping for rough finished surfaces of concrete, complete all as specified and as directed.

M&L for 600mm dia Reinforced Concrete Pipe NP2, with bends, collars tec., laid in trenches and jointed, with and including cement concrete bed PCC 1:3:6, type C2 (using 40mm graded granite stone aggregate), forming cradles, laid, packing & haunching sides, laid and tested, complete all as specified.

M&L for Charcol filling, spread and including filling in, spread, levelled and rammed including watering, for all leads & lifts, complete all as specified and as directed.

M&L for Sand filling, spread and including filling in, spread, levelled and rammed including watering, for all leads & lifts, complete all as specified and as directed.

M&L for Drilling bore hole of 200mm dia, in any type of soil strata including hard stone / boulder by suitable method upto first fracture and disposal of drilled / bored materials outside MD land, with and including mobilization / de-mobilization of drilling rig, hire & running charges of all equipment's, tools, plants & machineries required for the job for upto 200metre depth below ground level, complete all as directed by Engineer-in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium grade slotted pipe of 200mm dia, uPVC (SCH-80) and pea gravel, with and including development of bore hole by reaming by a multi edged tool (reamer) precision machining operation to enhance the dia of bore hole and finishing it from 150mm to 550mm in different steps as directed by Engineer-in-Charge, including required hire and labour charges, fittings & accessories etc., for all depths, complete all as directed by Engineer-in-charge.

M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and and including PVC concealed rigid conduit (minimum 20mm) meadium grade ISI marked or including PVC casing & caping suitable size, ISI marked, with accessories, junction boxes, tees, terminal boxes with and including factory made PVC boxes with modular top cover plates with frame for switches / sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate.

All as per Serial Item No. 61 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified.

All as per Serial Item No.61 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified.

All as per Serial Item No. 61 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified.

S&F Modular switch 1 way 5/6Amp, 1 Module, 240 Volts, complete all as specified and as directed.

S&F Modular switch 1 way 15/16A, 1 Module, 240 Volts, complete all as specified and as directed.

S&F Modular Socket, 5/6A, 2/3 pin combined , 2 module, 240 Volts, complete all as specified and as directed.

S&F Modular Socket, 6A/16A, 2/3 pin combined multipurpose, 2 module, 240 Volts, complete all as specified and as directed.

S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed.

S&F IN REPAIR LED Industrial Luminaries batten type fitting 1X20watt, 220Volt, >110 lum/W, PF>0.95, AC, integrated type batten, with driver and LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified.

S&F IN REPAIR LED Building Security light fitting 35Watts, 230 volts, >110lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed.

S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 415 volt, 12Way, double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified.

S&F IN REPAIR MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.

S&F IN REPAIR MCB SP 10 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.

S&F GI pipe light grade pipe 40mm dia for cable protection, complete on pole/walls/in road etc for cable protection, complete all as specified.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 10.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

M&L for Double wall corrugated high density polymer (SDR 17) pipe of 63mm outer dia and 50mm inner dia, ISI marked, with and including necessary fittings like couplers, bends, end caps etc., laid in trenches /floors & fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories, complete all as specified and as directed.

M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.

CLASSIC ENGINEERS (BID ID -3485586)

ASHOK M RAJGOLKAR (BID ID -3480381)

M/S MAHADEV M PATIL (BID ID -3479854)

M/s. KIRAN M CHOUGULE (BID ID -3480101)

ASHIRWAD ELECTRICALS (BID ID -3479629)

SHREESAMARTH CONSTRUCTION (BID ID -3480527)

RAJENDRA KRISHNA SARAF (BID ID -3484508)