Design, Supply, Erection, Installation, Testing and commissioning of grain silo system of total capacity 10,000 MT (4 X 2500 MT) at Latur MIDC, Plot No. E-18, District Latur,Maharashtra State.

Amount

Clearing grass and removal of rubbish up to a distance of 50meters outside the periphery of the area . As directed by Engineer in charge.

Cutting down trees including trunks and branches with girths above 30cm to 60cm and stacking the materials neatly with all lifts and lead of 1000m as directed and earth filling in the depression / pit if any. As directed by Engineer in charge.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (Bd.A.1 Page Number 259) As directed by Engineer in charge.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (Bd.A.2 Page Number 259) As directed by Engineer in charge.

Excavation for foundation in hard murum including removing the excavated material upto distance of 50meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift 1.50 m to 3.00m )[Bd.A.2 Page No. 259]

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50meters, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5m.) By Mechanical Means (Bd.A.3 Page Number 259 ) As directed by Engineer in charge.

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50meters, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Mean(Bd.A.3 Page Number 259) As directed by Engineer in charge.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50meters beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50meters beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means (Bd.A.4 Page Number 259) As directed by Engineer in charge.

Excavation for foundation in hard rock upto required depth by Pocklain machine with needle breaker including removing the excavated stuff upto a distance of 50 meters beyond the building area all lifts stacking or spreading as directed.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. As directed by Engineer in charge.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Bd.A.10 Page Number 262 ) As directed by Engineer in charge.

Providing earth work in embankment with approved materials obtained from departmental land . including all lifts,laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller to achieve not less than 97 % of standard proctor density for a lead of over 50mtr to 300mtr etc. complete. (Material obtained from departmental Land) As directed by Engineer in charge.

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) As directed by Engineer in charge.

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at Optimum Moisture Content in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.As directed by Engineer in charge.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ Vertical Shaft Impactor grade finely washed crushed sand)conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge ,compacting with vibratory roller, finishing, curing and including preparation of subgrade surface if required etc. complete. with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd. E. 1 Page Number 287) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap / granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.F.3 Page Number 298 and B.7, Page Number38) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel) etc.complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.F.5 Page Number 300 and B-7,Page No 38 ) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel)etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.F.6 Page Number 300 and B.7, Page Number38) As directed by Engineer in charge.

Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.(Bd.G. 1 Page Number 313) As directed by Engineer in charge.

Providing second class Burnt Brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Bd.G.5 Page Number 315 ) As directed by Engineer in charge.

Providing II class Burnt Brick masonary with conventional / Indian Standard type bricks in cement morter ( 1: 4 ) in half brick thick wall including longitudinal reinforcement of 2 bars of 6mm dia / 2 hoop iron strips 25mm x 1.6 mm at every III course properly bent & bounded at ends scaffolding, racking out joints and watering complete. [Bd.G.7 / P 316 ]

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Providing and laying Cast in situ/Ready Mix cement concrete Mix-25 of trap/ granite /quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curingetc.complete,(Excluding reinforcement and structural steel) etc.complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) ( Bd.F.8 Page Number 302 and B.7, Page Number38 ) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.F.11 Page Number 304 and B.7, Page Number 38) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-25 of trap / quartzite/granite /gneiss metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with Cement Mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding Reinforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd. F. 13 Page Number 305 /Indian Standard 456 (2000) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mixcement concrete Mix-25 of trap/ granite/ quartzite/gneiss metal for Reinforced Cement Concrete chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.F.9 Page Number 303 and B.7, Page Number38 ) As directed by Engineer in charge.

Providing and laying in situ / ready mix 20 Cement Concrete of trap/ granite/ quartzite/ gneiss metal for wearing course 8cm thick including compacting, finishing, curing and filling in joints with bitumen etc. complete. (with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled concrete batch mix plant / pan mixer with fine agreegates of required specifications ( Vertical Shaft Impactor sand finely washed etc )

Providing and laying in situ cement concrete Mix -20 with tremix treatment for 100 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate ( Vertical Shaft Impactor grade finely washed crushed sand) etc. complete

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade) (Bd.E.4 Page Number 289 and B-7, Page Number38) As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-15 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding / steps including steel centering, formwork, laying /pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic microprocessor based Programmable Logic Controller without Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade)

Providing and laying Cast in situ/Ready Mix Cement Concrete Mix-20 of trap metal for Reinforced Cement Concrete rectangular grid beam with slab as per detailed design and drawing, steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them to form surface with Cement Mortar 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller without Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade)

Providing and fixing in position TMT (Thermo Mechanically Tilted) - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. ( Bd.F.17, Page Number 306 ) As directed by Engineer in charge.

Providing and fabricating structural steel work in rolled sections like joists, channels,angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including concrete block, cutting,fabricating, hoisting, erecting fixing in position, Making riveted/bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre)

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. (Bd.L.4 Page Number 368) As directed by Engineer in charge.

Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.(Crushed sand Vertical Shaft Impactor Grade)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Bd.L.7 Page Number 369) As directed by Engineer in charge.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in Cement Mortar 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. [Bd.L.4 Page No. 368] ii) Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete

Providing & applying Oil bound distemper two coats on plastered or masonary surface including scaffolding & preparing the surface by brushing & brooming down complete.(Color Scheme-Snow white

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding Indian Standard of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc. complete

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface bybrushing and brooming down etc. complete.

Providing and laying in situ cement concrete Mix -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement) with coarse and fine aggregate ( Vertical Shaft Impactor grade finely washed crushed sand) etc. complete

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand Vertical Shaft Impactor grade finely washed etc.),compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand Vertical Shaft Impactor grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand Vertical Shaft Impactor grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand Vertical Shaft Impactor grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick Cement Concrete paver block of Mix-35 grade concrete with approved colour and design & pattern.

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in Cement Mortar1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with Cement Mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete. As directed by Engineer in charge.

Providing & fixing in position for flooring, of vetrified tiles of approved quality & make 600 x 600 mm size & tk. for flooring width on 1 : 4 cement plaster including cement float filling cement joints with neat cement slurry, curing, rubbing polishing & cleaning complete.

providing & fixing in position skirting or dado of vetrified tiles of approved quality & make 600 x 600 mm size & tk. for flooring width on 1 : 4 cement plaster including cement float filling cement joints with neat cement slurry, curing, rubbing polishing & cleaning complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red /Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On Cement Mortar 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and laying Antiskid tiles of approved quality of size 30 cm x 30 cm,confirming to corresponding Indian Standard for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (Crushed sand Vertical Shaft Impactor Grade/Natural sand)

Providing & fixing white ceramic tiles of approved quality 20 cm x 20 cm x 7 thickness for dado & skirting in required positions on plaster of 1 : 4 cement morter including all specials required like round corner tiles, angles, cups etc. filling joints with white cement slurry, curing & cleaning complete. [Bd. M. 13/386]

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete

Providing & fixing mild steel grill work for windows & ventilators upto 20 kg/sqm as per drawing including fixtures necessary welding and painting one coat of anticorrosive paint & two coats of oilpainting complete as directed [Bd. U1 P 537]

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc.complete. ( BD-T-34 Page Number 499 ) As directed by Engineer in charge.

2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR -Fire Door Tested in accordance to IS: 3614 Part 2. with prior approval of concerned Superitending Engineer Providing of 120 min Fire rated lead lined doors system duly tested for 3 criteria -Integrity, Insulation and Stability Criteria as per the IS: 3614 Part 2 and BS: 476 part 22 with standard heating conditions as specified in IS:3614 Part II 1992 and BS: 476 part 20 & 22 1987 to achieve the required integrity, insulation and stability (i.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140° C above the ambient temperature on the exposed surface of the shutter. The fire doors are tested with NCBN technology ("Non Combustible by Nature"). Lead lined to check radiation. Code No; 2 Hour Insulated, Flame, Smoke Radiation check Lead Lined Fire Door 57mm 2HR FRL (120/120) 3 Criteria - INTEGRITY / INSULATION/ STABILITY WOODEN DOOR - Fire Door Tested in accordance to IS: 3614 Part 2.

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating with box As directed by Engineer in charge

Providing and fixing 900milimetre high Stainless Steel 304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete As directed by Engineer Incharge.

Providing and fixing on walls/ceiling/floor 15mm dia. Chlorinated polyvinyl chloride pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipeline if necessary and conveying and stacking the same in Public Work Department chowky or as directed etc. complete.

Providing and laying in trenches 20 mm dia. Chlorinated polyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches etc. complete.Including removing existing pipeline if necessary and conveying and stacking the same in Public Work Department chowky or as directed etc. complete.

Providing and laying in trenches 15mm dai. Chlorinated polyvinyl chloride pipe including necessary excavation, fittings. Refilling trenches etc.complete Including removing existing pipeline if necessary and conveying and stacking the same in Public Work Department chowky or as directed etc. complete.

Providing & fixing in position 45 x 55 cms high class mirror over wash hand basin including all accessories, and necessary fittings etc. Complete as directed.

Providing & fixing 15 mm dia screw down bib / stop tap of brass including necessary socket, union, nuts complete. [Bd. V. 8 / P 554]

Providing & fixing white glazed earthenware semi stall type Urinals without cistern with inlet pipes stop tap, unplasticized polyvinyl chloride flush pipe, with fittings and flushing arrangement including unplasticized polyvinyl chloride soil pipe, unplasticized polyvinyl chloride trap and soil pipe connection upto the outside face of the wall, making good to damaged surface testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary befor use.) ( Spec.No. : As directed by Engineer - in - Charge)

Providing & fixing unplasticized polyvinyl chloride Soil / vent / waste pipe 75 mm dia.of approved make with standing min. pressure of 4 Kilogram / Cm. Square from standard manufactres with necessary fixture and fittings such as bend, tees, single junction, double junction, slotted vent offsets on walls or in the ground including excavation, laying refilling the trench etc. complete. As directed by Engineer incharge (BDV - 36 C ) ( It No..32/Page No. 115)

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. ( Bd.V.46, Page Number 576 ) As directed by Engineer in charge.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. Galvanised Iron plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. ( As directed by Engineer Incharge )

Providing and fixing 110 mm dia stabiliser pipe/ Polyvinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. As directed by Engineer in charge

Providing and fixing High Density Polyethylene container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. As directed by engineer-in charge.

Providing & fixing 15mm dia. Screw down whealed stop tap of gun metal / brass including necessary socket / union nuts etc. complete.

Providing & fixing 25mm dia. Screw down whealed stop tap of gun metal / brass including necessary socket / union nuts etc. complete.

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery

Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest ,Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery

Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT

3 DRAWER PEDESTAL UNIT @ 392L x 450D x 680Ht. mm.3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish,facia in 18 mm prelaminated particle board.

Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing.

Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating/glazing with plain /obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep Mild steel channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, Mild steel Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of Mild steel sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (Indian Standard 62481979) (Without mechanical gear)

Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing,moulding edges, polishing and cleaning etc. complete

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for Reinforced Cement Concrete / cementitious surface for terrace waterproofing on Burnt Brick Coba / Reinforced Cement Concrete after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc.complete.

Providing and fixing reinforced cement concrete man hole cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXNCTR

Supplying & laying (including excavation) 25 cm dia Reinforced Cement Concrete Hume pipe of standard thickness at required depth up to 90 cms. below road / ground surface, for covering provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

Providing and laying Cast in situ/Ready Mix cement concrete in Mix-20 of trap/granite/quartzite/gneiss metal for bed blocks,foundation block sand such other items including bailing out water,Steel centering, formwork ,laying/pumping,compacting, roughening them if special finish is to be provided ,finishing uneven and honey combed surface and curingetc.complete.The Cement Mortar1:3 plastering considered for rendering uneven and honey combed surface only.Newly laid concrete shall be covered by gunny bag,plastic,tarpaulin etc.(Wooden centering will not be allowed.),etc. complete. With fine aggregate (Crushed sand Vertical Shaft Impactor Grade)

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 300m. to 500m. inclusive from the site of excavation to the site of deposition as directed. As directed by Engineer in charge.

Conveying materials obtained from road cutting including all lifts,for a lead of 5Km. from the site of excavation to the site of deposition as directed by Engineer in charge.

Providing, fabricating, erecting and fixing in position pre-engineered building as per detailed specifications given in tender form chapter No.10 and as directed by engineer in charge with all necessary primary members,secondary members,roofing materials,wall cladding sheets,turbo Ventilators etc complete as directed.

Royalty Charges for hand broken road metal 40 mm metal & 80mm metal,Murum, Rubble & Sand etc .complete.

Cement - Fineness, Standard Consistency, Setting Time (Initial & Final ), Compressive strength, Soundness

Concrete Mix-25 grade - Mix Design with all tests on basic materials

Concrete Mix-25 grade - Concrete cube compressive strength (Set of 3 Cubes)

Crushed metal - Water absorption, Specific gravity,Impact value,Crushing value

Crushed metal - Gradation

Crushed metal - Combined Flakiness & Elongation of single metal

Brick - Crushing value, Water absorbation, & Specific Gravity

Steel - Tensile strength ,Yield stress, ultimate tensile stress, %elongation, weight per running meter,Bend/Rebend test.(Set of 3 Bars)

Murum - Plasticity Index

Murum - Field Density of compacted layer

Murum - Proctor Test

Wet Mix Macadam- Job mix

Wet Mix Macadam - Gradation

Wet Mix Macadam- Liquid limit & plastic Limit.

Wet Mix Macadam- Moisture content

Wet Mix Macadam- Flakiness Index & Elongation Index.

Wet Mix Macadam- California Bearing Ratio Test ( Field Determination Test) Excluding Transportation.As per IS 2720 Part XXXI

Wet Mix Macadam- California Bearing Ratio Test ( Lab ) With compaction test

Wet Mix Macadam- Compaction Test ( Proctor Density )

Electrification work- Supplying, installation , testing & commisioning for electrical work inclusive of internal & external lighting, emergency, UPS, connection from HT to panels, all panels, control room, earthing, automation, Programmable Logic Controller panel, of Pre-Engineered Building shed and office buliding/control room etc. complete as directed by Engineering incharge.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 200 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 Revolutions per minute with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 Revolutions per minute as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 34.40 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 300 ltr etc., on provided Mix-20 grade Cement Concrete foundation as per specification no. GEN-Diesel Generator

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for Diesel generating set of above 180 kVA upto 200 kVA capacity 3 phase, 415 V, 50 Hz, A.C. supply with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying, erecting, and terminating FR XLPE (Cross-linked polyethylene) insulated ,galvanised attel formed wire aemoured ( strip ) cable 1100 v,4 core 4 sq mm copper conductor complete erected with glands & ligs,on wall / truss/ pole or laiod on provided trench / pipe as per specification no. CB-LT/CU

Supplying, erecting, and terminating FR XLPE (Cross-linked polyethylene) insulated ,galvanised attel formed wire aemoured ( strip ) cable 1100 v,3 core 4 sq mm copper conductor complete erected with glands & ligs,on wall / truss/ pole or laiod on provided trench / pipe as per specification no. CB-LT/AL

Supplying, & Laying (Including excavation of sutable width & depth up to 90 cm 160 mm out side dia double wall corrugated pipes (DWC ) of High Density Polyethylene for enclosing cable below ground / road surface to required depth complete.

Supplying, installation and testing of Maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting galvanized iron strip of high purity required size used for earthing on wall and/or any other purpose with necessary Gl clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP

Point wiring for light/bell/exhaust / ceiling fan in plasticized polyvinyl chloride trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for independent plug in plasticized polyvinyl chloride trunking (casing-capping) with 1.5 sq.mm FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Wiring for plug on board with flush Switch socket, copper wiring and earthing as per specification No:WG-PW/SW

Supplying & erecting mains with 2 x 2.5 Sq.mm stranded copper plasticized polyvinyl chloride insulated wire with 1 x 1.5 Sq.mm copper plasticized polyvinyl chloride wire in plasticized polyvinyl chloride casing - caping 20 mm on wall / ceiling.

Supplying, erecting & marking DPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting anodized aluminium light Light Emitting Diode fitting (4 feet) Max.22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, Cement ConcreteT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V,surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided plasticized polyvinyl chloride Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/Light Emitting Diode.

Supplying & erecting 10-12W, 230V integral type Light Emitting Diode Lamp suitable for B-22/E-27 base.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying and erecting integrated Light Emitting Diode street light fitting 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W,CRI>70, Cement ConcreteT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ Galvanised Iron pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 Rounds Per Minute, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) Mild steel fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer,instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) Mild steel fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and acceessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per Indian Standard 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 at 110 to 90 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 11 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 Revolutions per minute, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) Mild steel fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/JP

Supplying, erecting & terminating XLPE (Cross-linked polyethylene) armoured cable 4 core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) Galvanised Iron earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE (Cross-linked polyethylene) armoured cable 3 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) Galvanised Iron earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting plasticized polyvinyl chloride armoured cable 10 core 2.5 sq mm copper conductor continuous 5.48 sq. mm (12 SWG) Galvanised Iron earth wire erected with glands & lugs, on wall/ trusses/pole or laid in provided trench

Supplying, installing, testing and commissioning FR, XLPE (Cross-linked polyethylene) armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying and erecting Galvanised Iron strip of required size used for\ earthing on wall and/or any other purpose with necessary Galvanised Iron clamps fixed on wall painted with bituminous paint in an\ approved manner with joints required. As per specification no EA-EP.

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC,synchronous speed 3000 Revolutions per minute, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) Mild steel fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete,as per specification no. FF-MFP/BP

Supplying and erecting Galvanised Iron pipe ‘C’ class ERW 200 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting Galvanised Iron pipe ‘C’ class ERW 150 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting Galvanised Iron pipe ‘C’ class ERW 100 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting Galvanised Iron pipe ‘C’ class ERW 75/80 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting Galvanised Iron pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

Supplying and erecting cast iron double flange sluice valve 200 mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 150 mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 100 mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron double flange sluice valve 75/80 mm dia. complete as per specification no. FF-VL/SV

Supplying and erecting cast iron foot valve ball type/flap type of size 200 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron foot valve ball type/flap type of size 150 mm dia with strainer for negative suction complete as per specification no. FF-VL/FV

Supplying and erecting cast iron double flange NRV of size 150 mm dia complete as per specification no. FF-VL/NRV

Supplying & Erecting cast iron double flange NRV of size 75/80 mm dia complete as per specification no. FFVL/NRV

Supplying and installing pressure gauge of 100 mm dia., 0- 300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and Galvanised Iron pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and installing air vessel of 300 mm dia 1.5m in height Mild steel tank installed inside pump house / on terrace complete as per specification no. FF-FFA/ACT

Supplying and erecting 150 mm dia end line strainer for positive suction complete as per specification no. FFVL/ELS

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and installing pressure switch with 12/15 mm dia isolation valve, Galvanised Iron nipple, elbow, etc complete as per specification no. FF-FFA/PS

Planning & Design for Silos (10000 MT) including Pre-storage - 1 X 100 MT+ Pre- cleaning unit, hoppers, underground tanks, tipping zones, loose grain filling station, bagging unit including surge bins, all necessary conveyors, mechanical, electrical, firefighting and plumbing parts Inclusive of all foundations, silo structure, earthing with all required components. Design ( Reinforced Cement Concrete and steel Structure) to also include PEB structures, control room, Reinforced Cement Concrete room, silo office ,pump house and all other components with proof checking of above from Govt. Engineering college or IIT complete to satisfaction of MSWC engineer. Geotech survey + contour Survey (Charges should not be exceeded more than 1 % of total project cost.)

Supply, Installation, Testing & Commissioning (SITC) + Freight works for Flat bottom base - Silos 2500 MT (Metric Tonne) with providing, first time design and free lifetime updates for Silo operation software.

Supply, Installation, Testing & Commissioning (SITC) + Freight works for Hopper bottom pre storage - Silos 100 MT (Metric Tonne) with providing, first time design and free lifetime updates for Silo operation software.

Supply, Installation, Testing & Commissioning (SITC) + Freight + MEP works. (for silos and ancillary structures). a) All Silo accessory support structures. b) Silo Precleaning processing tower Structure c) Silo Precleaning tower equipment. d) Electrical works-inclusive of Internal and external lighting, emergency UPS, Connection from HT to panels, all panels, control rooms, earthing, lightening arrester complete. e) Mechanical works-inclusive of all Conveyors, motors, control rooms complete. f) 2 receiving hoppers (one hopper with an underground hopper bottom MS tank of 10 MT (Metric Tonne) and one hopper grill dump compatible with tipping by hydraulic trucks with separate underground MS tank of 20 MT (Metric Tonne). g) Bagging station of 30 TPH capacity with bagging hoppers. h) Loose Grain dispatch station- 50 MT (Metric Tonne) with a retractable nozzle, tank complete i)Plumbing & Drainage works-inclusive of all items complete. j) Fire-fighting works-inclusive of all items c omplete. k) Security, CCTV surveillance (for the entire silo complex), Fire Alarm, Detector works- inclusive of all items, panel, repeater panel complete. l) Automation - Programmable Logic Controller panel and integration with Supervisory control and data acquisition softwate (Superwisery Control and Data Acquisition ) of silo operating station. m) Automation - Programmable Logic Controller panel and operating station (Superwisery Control and Data Acquisition ) n) Providing, first time design and free lifetime updates for Silo operation software. o) High end type PC with latest configuration, monitor 22 “, colour TFT -Light Emitting Diode display, laser printer , computer furniture, UPS as per Tender specification. p) Any other items which require to complete the entire system but not mentioned in thisTender as a EPC project.

Operational Support to begin from end of trial run (Min 2 persons full time at the facility)

Grain Chiller -Supply, Testing & Commissioning of Grain Chiller for silos having cooling capacity 160kW and cooling performance 310-520 t/d with air flow 18000 m³/h³ ,400 mm dia airoutlet interface including all necessary required accessories as directed by engineer in charged.