REPAIR TO FENCING CHEQUERED TILE, STEEL GATE, GRANITE AT KB LINE, MP LINE AND GWALIOR ROAD UNDER AGE B/R-II OF GE (EAST) AGRA

Amount

S&F in repairs galvanised, 2 stand steel barbed wire 2 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails staining bolts incl, securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins and around any type of pipe etc as directed (each line wire to be measured) complete all as specified and directed.

Dismantling of wooden / PCC fencing post of any description etc complete all as specified & directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu.m in soft/loose soil, getting out, returning, filling with PCC ( PCC will be paid under separate items ) complete all as specified and directed.

M&L for cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S & F angle iron as in post and struts in fencing including embeding in concrete, cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, running rail for gate etc., simillar work confirming to Fe-290 Gde E-165 complete all as specified & directed.

Dismantling fencing wire mesh, chain link any type and any size etc complete all as specified and directed.

Supply and Fixing G I chain link fencing of weight not less than 3.15 kg / sqm mesh of size 75x75 mm and 3 mm dia of wire to any type fixing with flat iron and nut bolts etc complete all as specified and directed. Note :- flat iron will be measured and paid separately.

S &F of Mild steel round bars Fe 290 (Gde - E-165)10mm dia and over, cut to length, bent to shape required, including cranking, bending hooking ends and binding and fixed with flat iron alongwith fixing with chain linkfencing etc complete all as specified and directed.

S & F screw bolts (machine made) with hexagonal or sqare heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts n exc 50mm and dia of shank 8 to 10 mm dia etc complete all as specified & directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description ,over 10cm in width or girth not otherwise described including preperation of surface all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer on new steel Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint including preperation of surface all as specified and directed.

M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing of chain link fencing etcall as directed incl necessary formwork etc complete all as specified and directed.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc including removal of spoil etc complete from drain. (No extra payment shall be claimed on this account)

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L RCC M-25 (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc

M&L RCC M-25 (20 mm graded stone aggregate) as in column

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified & directed.

S&F mild steel bars 5 mm dia and over up to 10 mm dia in stirrups space and binders. (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel complete all as specified and directed.

M&L Formwork to side of concrete foundation footing base of column raft beam and plinth beam with required gap filler etc complete all as specified and directed.

M & L form work to side/bottom of pillars, post, column, beam, slab square, rectangular or polygonal required gap filler etc complete all as specified and directed.

M & L granite machine cut 20 mm thick black coloured bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match including fixing necessary fasteners with chemical adhesive for fastening at any height (n exc 11 m) including necessary scaffolding centring etc, cutting, polishing & rounding edges as on columns or pillars /columns over and including 15mm thick rendering in cement mortar 1: 4 complete all as specified and directed.

M&L for Coloured (black) Glazed ceramic tiles 450x300x7-8mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

Dismantling of structural steel work incl. doors , gates etc complete all as specified & directed.

S&F Framed work as in ornamental steel gate revolving on bearing plate incl pintel hinges fixed on pillar with PCC block of size required at site as per sample approved by Engr-in charge. Note:-Weight of gate decided by BOO which will be conveyed by GE before fixing and necessary arrangements for weighing of steel gate by the contractor on his own expense.

M&L, rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface even and smooth complete all as specified and directed.

M&L, rendering 15 mm thick in CM 1:4 on surface other than fair faces of brick work or concrete surface and finishing surface even and smooth complete all as specified and directed.

M & L for two coat of cement base paint on new / old plastered surfaces of wall over one coat of alkali resistant primer including preparation of surfaces complete all as specified and directed.

Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) etc complete all as specified & directed.

M&L for 75 mm thick Cement concrete type D-2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing finishing surface even and rough using broom finish complete all as specified and directed.

M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately.

M&L for machine pressed coloured rubber moulded chequered tiles 30 cm x 30 cm x 20 to 22 mm thick set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for machine pressed coloured ENDURA tiles 30 cm x 30 cm x10 mm thick set, jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in copings, kerbs, benching and the like, including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

S&F for steel truss in tubular trusses including special type of washer and using ERW washer or induction butt welded mild steel tubes as post / rafter/ purlin conforming to IS : 1161 - 1988 grade St - 240 etccomplete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 290 Gd 165.complete all as specified and directed.

M&L for pre painted galvatume AL zinc coating GI based corrugated steel 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Abhi Construction

ANANYA CONSTRUCTION CO.

MNR ASSOCIATES

milan enterprises