Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.5 LAccepted-AOC | ₹16.5 L | 1 | Accepted-AOC L1 |
| 2 | 2₹17.4 L+₹84,827.90 (5.13%)Rejected-Finance | ₹17.4 L+₹84,827.90 (5.13%) | 2 | Rejected-Finance Quoted Higher Price than L1 |
| 3 | 3₹17.8 L+₹1.3 L (7.83%)Rejected-Finance | ₹17.8 L+₹1.3 L (7.83%) | 3 | Rejected-Finance Quoted best price. Compare to other bidders |
Tender Value
Refer Docs
EMD Value
₹95,000
Closing Date
16 Jun 2026, 11:00 amClosed
The Director
NIFT CAMPUS, C.A. Site No. 21, 16th Cross, 27th Main Road, Sector- 1, HSR Layout, Bengaluru 560102. -India
Repair and maintenance work of hostel furniture, aluminium and related miscellaneous works at various locations on BOQ basis at NIFT Campus, Bengaluru.
2026_NIFT_911163_1
01/26-27/ 5156/Bldg./PW/2011/V-II (PART-I)
Open Tender
Support/Maintenance Service
Percentage
60 days
NIFT Bengaluru Campus
As per Tender
9 documents required · 9 mandatory
₹0
₹95,000
Yes
NIFT Bengaluru Campus
29 Jun 2026
3 Jun 2026
17 Jun 2026
3 Jun 2026
16 Jun 2026
3 Jun 2026
8 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 62.6 | kg. | 626.46 | ₹39,216.4 |
| 0.0 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | 1 | NA | - | - |
| 2.1 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) | 273.6 | kg. | 748.65 | ₹2,04,830.64 |
| 0.0 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry,etc. as per direction of Engineer-in-charge. ( 10 x 80) mm | 20 | each | 162.43 | ₹3,248.6 |
| 0.0 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | 32.73 | sqm | 1,776.2 | ₹58,135.03 |
| 5 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side | 3.72 | sqm | 1,344.37 | ₹5,001.06 |
| 6 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (125x75x4) mm | 10 | each | 177.12 | ₹1,771.2 |
| 7 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(300X10)mm | 4 | each | 153.52 | ₹614.08 |
| 8 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineerin-charge. | 8 | each | 1,003.06 | ₹8,024.48 |
| 9 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : (125)mm | 4 | each | 78.18 | ₹312.72 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.95 MB
Tendernotice_2.pdf
PDF • 0.98 MB
Tendernotice_3.pdf
PDF • 0.97 MB
Tendernotice_4.pdf
PDF • 0.91 MB
Tendernotice_5.pdf
PDF • 0.97 MB
Tendernotice_6.pdf
PDF • 1.56 MB
Tendernotice_7.pdf
PDF • 1.13 MB
E_Notice_Inviting_Tender.pdf
Tender Documents • 2.40 MB
BOQ_957699.xls
BOQ • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .