REPAIR/IMPROVEMENT OF LT EXTERNAL SERVICES SUCH AS OH CONDUCTORS,UG DISTRIBUTION CABLES FEEDER PILLAR BOXES AT SECTOR III AREA AND INSTALLATION BOARDS UNDER GE DEOLALI

Amount

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5 mtr in wide and exc. 1.5 mtr but n. exc 3.0 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for Dry river sand , filling in trenches around under ground cable complete all as specified and directed. (Note : Measurement will be after punnind down.)

Supplying and laying reinforced precast concrete HT cable cover, class HV, type 1 flat , size 300mm x 180mm x 40mm complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culve (Note: Excavation and GI Tubing earthwork shall be measured and paid seperately under respective item of Sch 'A'.) :-

(a) 6 Sqmm 2 Core

(b) 10 Sqmm 2 Core

(c) 10 Sqmm 4 Core

(d) 16 Sqmm 4 Core

(e) 25 Sqmm 4 Core

(f) 35 Sqmm 3.5 Core

(g) 50 Sqmm 3.5 Core

(h) 70 Sqmm 3.5 Core

(j) 95 Sqmm 3.5 Core

(k) 120 Sqmm 3.5 Core

Supplying, fixing, jointing and testing heat shrinkable Straight through joint , with including jointing materials suitable for 1100 V , XLPE LT cable of size 25-50 sqmm , 3.5 core , Make: Denson complete all as specified and directed

Supplying, fixing, jointing and testing heat shrinkable Straight through joint , with including jointing materials suitable for 1100 V , XLPE LT cable of size 70-150 sqmm , 3.5 core , Make: Denson complete all as specified and directed .

Supplying, fixing, jointing and testing heat shrinkable Cable End Joint , out door type , with including jointing materials suitable for 1100 V , XLPE LT cable of size 50-95 sqmm , 3.5 core , Make : Denson complete all as specified and directed .

Supplying, fixing, jointing and testing heat shrinkable Cable End Joint , out door type with including jointing materials suitable for 1100 V , XLPE LT cable of size 120-185 sqmm , 3.5 core , Make: Denson complete all as specified and directed . (Note: Items No :10 to 13 Cable joints rate inclusive of dismentling rate)

Supplying, install and errect in true vertical position steel tubular swaged welded pole complete with cast iron/MS base plate 6mm thick and of size 300x300mm, final taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S. tubing conforming to IS-2713 part-II type 410 SP-55 (11.0 metre long) HT including of holes of reqd Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No the black paint by stenciled letters/figures of 8cm height complete all as specified and directed . (Note: Excavation and PCC works will be measured and paid separatly in respected items.)

Supply, Install and errect in true vertical position steel tubular swaged poles complete with MS base plate of 6mm of size 300mm X300mm finial taper plug,pole cap,bolts,nuts and washers screws,pole made out of ERW MS tubing as per IS-1161 and pole shall be as per IS-2713 Part II type 410SP-31 (9.00 Mtrs Long) complete including one coat of red oxide zinc chrome primer and two coats of Aluminium paint for exposed surfaces and two coats of black bitumenous paint for portion embedded in concrete complete all as specified and as directed Note: Excavation and earth work ,PCC in foundation /plinth block/coping shall be measured and paid for separately

Supply, stringing, streaching and binding with insulator, ACSR conductor (Weasel /ferret/Mink) on HT/LT Poles including providing of necessary jumpers, connecting all existing incoming and out going connections, trimming of trees approximately 2 mtr aroun

Stringing only aluminium conductor steel reinforced incl suitable binding wire for connecting the extg OH lines complete all as specified

M & L in repair/replacement for cradle hexagonal , rectangular fabricated with GI wire 4 mm dia on extg OH line in replacement all as specified and directed

M & L in replacement for stringing GI earth wire 4 mm dia on extg OH line in replacement all as specified and directed

Supply and fix in replacement disc insulator porcelain viterous, 145 mm high and 255 mm dia ball and socket type white /brown / green two in series assembly for tension clamps for conductor working pressure 11000 volts

Supply and fix in replacement disc insulator porcelain viterous,white , brown or green insulator including one galvanised mild steel spindle, two galvanised iron wahsers and one galvanised iron nut, 65 mmdia for 1100 volts grade complete all as specified

All as item No. 20 above but 100mm height and 65mm dia for 1100 volts grade.

S & F in replacement of disc type insulator, porcelain, vitreous 145 mm high and 255 mm dia ball and socket type, white, brown or green, with tension clamps for conductor, working pressure 11000 volts, complete all as specified and directed.

S&F in replacement shackle type insulators porcelain vitreous, white/brown/green colour for 1100 V grade including galvanized MS straps, washers, insulator bots, washers and nuts of height 100mm and dia 115mm confirming to IS 731 of 1971.

Supply and fix switch air break gang operated and M&L switch air break gang operated triple pole mechanically operated mounted on HT 11 KV outdoor for horizontal or vertical mounting insulators and mild steel galvanized frame with operating rod of 20 mm bore medium grade ISI marked galvanized iron pipe worked from ground level for current rating 400 Amps including nuts, bolts and washers etc of required size, drop out explusion type fuse having 9 insulators of capacity to suit the load at site including locking arrangement with locks and synthetic enamel paint over a coat of red oxide primer over mild steel work and electric connection complete all as specified and directed.

All as per srl Item No. 24 Above but current rating 200 Amps.

S&F drop-out fuse unit, expulsion type for out door air break gang operated switch, single pole mounted on and including insulators and jumpers for 11kv working pressure fixed to and including MS channel with nuts, bolts and washers etc, systhetic bounded fuse tube complete with line cap suitable for current carrying capacity upto 100Amps all as directed.(set of three)

S&F in repairs lightening arrester Zinc Oxide distribution class arrestor highly non linear nature of metal oxide verister type complete with all fittings with discharge cap. of 5 KA suitable for 11 KV out door type conforms to IEC 99-4/1991 standard all as directed Make: Jaipuria/Pactil/Atlas/CG

Material and labour for stay assembly comprising of 20 mm dia galvanised steel stay rod 1800 mm long MS galvanised stay plate 6 mm thick of size230 x 230 mm stay bow including loop insulator porcelain vitreous of 90 x 140 mm clearance hole 25 mm complete all as specified and shown in EP No. 1 of SSR Part I 2009.

Supply and fix galvanised stranded stay wire for stay to pole, stranded size 7/4 mm fixed complete all as specified and shown in EP No. 1 SSR Part I of 2009.

S & F in replacement of pin type, porcelain, vitreous, white, brown or green insulator, including one galvanized mild steel spindle, two galvanized iron washers and one galvanized iron nut, 150 mm height, 150 mm dia for 11000 Volt grade, complete all as specified and directed.

Dismantling of cross arms of MS fabricated complete with all accessories viz nut, bolts, washer etc. complete all as specified and directed.

M&L for Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts,bolts,washers, welding , bending cold or hot, drilling holes for bolts,in any shape or sizes as indicated or directed and inclusive of one primer coat and two coats of alluminium paint complete all as specified and directed.

Supply,installation, testing and commissioning new LT feeder piller box " CPRI Approved" cubicle type,with angle & frame, free standing, floor mounted, outdoor, weather proof type, pedstal mounted feeder Pillar working on 440V 3-phase, 50 Hz, AC supply with and 4 Nos stepped aluminum bus bars for looping & branch connection system , weather proof, dust-proof and vermin proof with canopy on top, 3mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor, weather proof IP-55 protection installation, the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust proof .bus bar chamber shall be provided with better ventilation facility in the form of louvers for better heat dissipation as per specification with and including the following components complete all as specified and as directed:-

Supply,installation, testing and commissioning new LT feeder piller box " CPRI Approved" cubicle type,with angle & frame, free standing, floor mounted, outdoor, weather proof type, pedstal mounted feeder Pillar working on 440V 3-phase, 50 Hz, AC supply with and 4 Nos stepped aluminum bus bars for looping & branch connection system , weather proof, dust-proof and vermin proof with canopy on top, 3mm thick CRCA sheet steel enclosure, painted as per the 7-tank process and painted for outdoor, weather proof IP-55 protection installation, the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust proof .bus bar chamber shall be provided with better ventilation facility in the form of louvers for better heat dissipation as per specification with and including the following components complete all as specified and as directed:-

S&F tubing 'light grade' galvanised iron with all fittings and fixed to poles, walls etc. with flat iron clamps/bolts/nuts/washers or laid in floors/under roads complete all as specified and directed of the following bores :- Note: Excavation and GI Tubing earthwork shall be measured and paid seperately under respective item of Sch 'A'.

(a) 80 mm bore

(b) 50 mm bore

(C) 40 mm bore

Cutting through existing bituminous road /PCC/floor/approx size width 50cm X 60cm depth along length 3 mtr to 6 mtr cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish complete all as specified and directed.

M&L for cement concrete 1 : 4 : 8 type D-2 using 40 mm graded stone aggregate as in foundation for pole including necessary form work all as specified and directed

M & L for cement concrete 1 :3 :6 type C-1 using 20 mm graded stone aggregate incl necessary form work all as specified and directed.

M&L for cement concrete 1 : 2 : 4 type B-1 using 20 mm graded stone aggregate as in foundation ,filling and mass concrete necessary form work all as specified and directed.

M&L in replacement of u/s MCCB of 4 pole 100 Amps 415 Volts with breking capacity 16 KA of make Havells/ Legrand / L&Tcomplete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L in replacement of u/s MCCB of 4 pole 125 Amps 415 Volts with breking capacity 16 KA Havells/ Legrand / L&T complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L in replacement of u/s MCCB of 4 pole 160 Amps adjustable type, 415 Volts, with breking capacity 36 KA complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L in replacement of u/s MCCB of 4 pole 200 Amps adjustable type, 415 Volts, with breking capacity 36 KA Havells/ Legrand / L&T complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L in replacement of u/s MCCB of 4 pole 250 Amps adjustable type, 415 Volts, with breking capacity 36 KA Havells/ Legrand / L&T complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L in replacement of u/s MCCB of 4 pole 400 Amps adjustable type, 415 Volts, with breking capacity 36 KA Havells/ Legrand / L&T complete all as specified and directed .Make: Legrand / L&T/ Seimens

M&L for earthing GI Strip complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6 mm size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified and directed.Note: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

M&L for galvanised iron ( GI ) strip 32 X 6 mm complete all as specified and directed. NOTE: The unit rate includes earth strip in Per RM and work of connected earth point/test point .

Supply,erection,testing and commissioning of outdoor type LT Bus bar Chamber box,platform mounted,suitable for 200Amps 3 phase 4 wire,415V AC Supply and having 4 Nos steeped type aluminium bus bar for looping & branch connection system .the chamber shall be painted with powder coated paint. the bus bar chamber shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less then IP-55.The bus bar chamber shall be made out of 3.0mm thick CRCA mild steel sheet and 3.0mm thick gland plate,front door (01 layer) and rear door (01 layer) openi ng facility and 4 side slanting canopy type roof on top and angle iron pedastal frame 600mm high above the ground level.the bus bar chamber shall be provided with ventilation facility in the form of louvers for better heat dissipation (Note:- The bus bar chamber Box shall be designed in such a way that adequate workable space is made available inside the compartments and the size of the chamber shall not less than 600mm height (without base frame & canopy 600mm width and 500mm depth).

M&L for painting to steel tubularswaged /RCC Pole of LT 1100V overhead lines(9mtrs) complete with including cross arm/clamps etc complete

M&L for painting to steel tubular swaged /RCC Pole of HT 1100V overhead lines(11 mtrs) complete with including cross arm/clamps etc complete

M&L for painting to Two pole structure steel tubular swaged /RCC , complete with including cross arm/clamps etc complete

M&L for painting to Four pole structure steel tubular swaged/RCC complete with including cross arm/clamps etc complete ( Note for item Num:-49,50,,51,52 :-M&L Rates included for Each jobs.following works included in complete Each/One jobs.(a) Scraping out wornout old paint and making the surface smooth. (b) Bottom of the pole up to 1.5 meter from ground level to be painted with two coats of anti corrosive enamel paint(every 50cm block,alternate Black,yellow & block for LT and Black ,red & black for HT) & Writing the pole & feeder no all as directed at site.)

Supply, Laying , jointing and testing 120 Sqmm 3 Core HT underground cable, heavy duty, 11000 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of sizes

Supplying, fixing, jointing and testing cable jointing kit for 11KV (Earthed) grade cable for outdoor termination joint heat shrinkage type joint, with including jointing materials suitable for 3 core XLPE armoured aluminium of size 120-185 Sqmm , Make: Denson complete all as specified and directed .

Supplying, fixing, jointing and testing cable jointing kit for 11KV (Earthed) grade cable for outdoor termination joint heat shrinkage type joint, with including jointing materials suitable for 3 core XLPE armoured aluminium of size 120-185 Sqmm , Make: Denson complete all as specified and directed .

Supplying, fixing, jointing and testing cable jointing kit for 11KV (Earthed) grade cable for Straight through joint heat shrinkage type joint, with including jointing materials suitable for 3 core XLPE armoured aluminium of size 120-185 Sqmm , Make: Denson complete all as specified and directed .

M&L in replacement for fabrication of LT panel door covers made out MS Sheet 2mm thick necessary folding jointing as suitable at site with existing panel board indoor/outdoor including necessary welding, hinges and supports complete all as specified and as directed. Note : Transport charges for electric/gas welding machine from workshop to site and back shall be included in the rate quoted.

M & L for painting of existing panel board of size 1.5 m x 1 m out door type complete ( inner and outer side) (By hand)with two coats of synthetic enemelled paint over a coat of red oxide primer after preparation of surfaces incl scraping of patcy paint surfaces of various location as per site requirement all as specified and directed.

Supply and fix in replacement Danger notice plate 1.6 mm thick mild steel sheet viterous enemelled white with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps bolts and nuts of apporved size for HT 25x20 cm

M&L for making underground boaring(Manually/Mechanically) through existing bituminous road/PCC/Floor along cross section of the road for laying of GI tubing for encasing of cable all as specified and directed at site.

Note: Amount of sch of credit of Rs.57,230/-will be deducted from total amount of BOQ.

Sona Lakshmi Associate and Developers

KOYNA ENGINEERS PVT LTD

Rama Electricals

M R ENTERPRISES

Deep Electricals & Engineers