Drilling, boring and installation of 01 nos. Tubewell with (Reverse Rotary Method) at Mukesh Pehlwan wali gali ward no. 4 under Div.VII, zone2 under MCG all other works contingent thereto.

Amount

Supplying and fixing following C.I. D/F pipe, Ci specials, sluice valves with wheel, non return valves with GM. Flap including cost of jointing materials, excavation, laying refilling including making adequate supports of masonry/concrete/steel for delivery pipe from submersible pump set up to 1.5 meter outside the outer wall of pump chamber as per plan shown as per specification given in Schedule Noll. A) Detail of pipe and specials a) CI D/F bends reducers, tapers, tees, tail piece, and blank flange. Detail of pipe and specials CI D/F bends, reducers, tapers, tees, tail piece, blank flange etc up to 100mm i/d

Supplying Erection Testing of Electric Control panel for TAWell in pump Chamber Consisting of Ms Sheet of Thickness 18 Gauge Duly painted Box Type floor, Mounted, Made by angel frame containing 1 Nos. Fully Automatic Air Brake starter Suitable For 15 HP Motor, Main Switch of suitable Rage with HRC Fuse 1 No. Volt Meter of (0 to 500 volts) 1 no. amp. meter of 0 to 32 Amp., 3 Set Os Indicating Lamp capacitor of suitable capacity 1 Nos. Single Phase Preventers With the Timer switch including wiring in panel board Suitable Electric Energy Meter wiring from to Electric Control panel Board Complete in all Respect per Specification Given in Schedule No.1

Development ofTIWell according to clause 9.3 oflS 2800 1991 (Part-I) as amended up to date and specifications attached and as directed by the Engineer-in-charge of the work including the cost of all consumable stores, fuel, oil compressors, pumps and machinery etc. as required for this work

Supplying as per IS: 226/1975 as amended up to date deodar wooden box made of 20mm thick wood size 60cm x 30cm x 75cm with lid and locking arrangement etc. for preserving the strata samples received from the bore as and when desired by the Engineer-in-Charge.

Resistivity Survey

Supply and lowering 219.10mm outer dia ERW steel plain pipes as per IS 4270-1992 as amended pipe in 4 to 7 metters random lenth with 88.90mm of threated ends ( 8 threads to an inch or 25.40 mm) manufactured out of 6.35 mm thick M.S socket 152.40 mm length with inside

Supplying & packing graded gravel of size as per ISI 4097/1988, as amended upto date and specification attached with this schedule of item of work. The gravel should be free from dust, dirt or vegetable matters. Packing to be done from the housing pipe to the bottom

Supplying and fixing 219.10 mm M.S. Clamp as per IS: 226/1975 as amended upto date for supporting the housing pipe supported on two girders not less than 100 mm X 150 mm and two meters long each embedded in suitable as approved by Engineer-in-charge

Supplying and fixing well threaded M.S. Cap for 273.10 mm outer dia M.S. pipe as per ISI 226/1975 as amended upto date to the satisfaction of Engineer-in-charge. 1x1=1 nos

Providing and laying of 100mm DI pipe line

Drilling of 685.80mm dia by hydraulic rotary drilling (reverse circulation method) according to ISI specification No.2800-1991 (Part-1) as amended upto date and modified to extent of the specification attached with this schedule of items of work in all kinds of soils and

Providing and fixing in position suitable bail plug hook of 219.10mm as per IS 226/1975 as amended upto date," including the cost of M.S. screwed sockets etc. complete in all respects to the entire satisfaction of the Engineer-in charge of the work.

Sluice valves 80mm

Supply & Lowering slotted pipe of size 219.10mm outer dia, ERW conforming to IS 3589-1991 (with last ammended) duly ISI marked msde out of 35mm thick steel sheet with rebom length of 4-7 mtr inside and outside coated with

Supplying, erection testing and commissioning of submersible pumping sets as per BIS Specification No.8034-1989 (as amended upto date for pumps) and IS. 9283-1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold

Bidder Name

Amount

Aditya Construction(GSTN-06FOLPD9875Q1ZT)

Prakash Pump Engineers(GSTN-06AHPPG8473K1ZQ)

Poorav Enterprises(GSTN-NA)

Sachin Gupta(GSTN-NA)

Poorav Enterprises

Sachin Gupta

Aditya Construction

Sachin Gupta

Aditya Construction

Poorav Enterprises