Civil works

Civil works Items :

Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of cement primer of approved brand and manufacture on wall surface. (Asian Paints Apcolite)

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : 13.60.1 Two or more coats on new work (Asian Paints Apcolite )

Painting with synthetic enamel paint of approved quality- One or more coats (Asian Paints Apcolite)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade Ac 15)

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required including all necessary fitting. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness

Providing & fixing panelling in aluminium door, windows, ventilators & partition etc with aluminium snap beading and PVC/neoprene gasket etc complete as per direction of engineer in charge (cost of aluminium frame & aluminium beading shall be paid seperately). a) with one or both side laminated 4mm thick ACP sheet of reputed company and of required colour & shade.

Providing and fixing aluminium sliding fittings all complete as per the direction

Providing and fixing decorative handles with necessary screws etc. complete as per approved design by engineer in charge. (6” /8”size )

Providing and fixing ISI marked 85x 42mm pull bolt lock with necessary screws, bolts, nut and washers etc. complete.(Decorative type as per approved design).

Providing and fixing Door Lock for aluminium gate - Godrej Mortise or equivalent brands Door Lock Handle Set 175mm ELC , 6-Lever Locking Mechanism (Satin Steel Finish)

Providing and fixing Door Closer on aluminium frame – Godrej or equivalent brands Locks C071 2 Speed Hydraulic 60kg Door Closer (Silver) including door stopper fitting

Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.

RKS Enterprises (BID ID -3181174)