B.Nuagaon STW

Amount

Schedule A(Civil works & Materials)

Empty pannel board of size ( 110cmx45 cmx25cm) made out of 20 gauge CR sheet with stand made of MS angle of 20mm size with 4 nos. of legs of 30cm. Size painting in Navy Blue colour with instruction of OLIC

XLPE insulated ( heavy duty ) armoured electric cable of size 3 core x 6 sqmm. With alluminium conductor for use in 3 phase system in working voltage up to 1100 volt at 50 HZ confirming to IS 7098 part -I- 1988 & as per the particulars mentioned .

ISI marked high density polyethylene ( HDPE pipe ) for water supply as per IS -4984 / 1995 ( reaffirmed to 2002 )with amendement No.1,2,3,4, & 5 of material grade PE 80 pressure rating PN- 6 and nominal dia of 63mm with CIPET testing.

150mm dia Bore well cap

8 mm Steel Wire Rope with PVC coated

50 mm dia G.I Bend with Socket confirming to lS No.1239 (Pt‐II/1992)

50 mm dia Stainless Steel threaded nipple of 15 Cm long confirming to lS 1239 ‐ Pt‐II/1992

FTH G.I Nut & bolt

" U " clamp for fixing the submersible cable and wire rope with pipe

Installation of submersible pump inside the Shallow Tube well fitting of HDPE pipe, tying the pump set with wire rope, connecting the supply line and submersible cable with starter, fixing the pannel board completing all the electrical installation, charging the project and making trial run etc. complete. asper the direction of the site engineer-in-charge

Cost of 5 H.P submersible energy efficiency star rated bronze impeller pump set having discharg of 285 LPM

Pannel Foundation with 1st. Class KB Brick massonary in cm (1:6) of size 1.5M X 0.60MX 0.60M including base concrete of 7.5 cm depth in cm (1:2:4) sand filling, plasteringin cm (1:6) curring etc complete as per direction of Engineer in charge

Execution of Bi-Party agreement and document charge

Control Pannel with D.O.L Starter

Disply Board of size 1.20 mtr.x0.9 mtr. Stating the salient features of cluster bore well projects of letter size 10 cm. X 8 cm. having colour code of navy blue back ground & white lettering made with KB brick masonary in C.M.(1:6) with complete colouring including transportation.

Schedule B (Electrical Works)

Construction of 3-phase 11 KV line as per REC standard confirming to RE Rules 1956, with 300 Kg 9 meter long PSC pole of 8 No., 55 sq.mm A.A.A. conductor 11 kv “V” Cross-Arm, required Stay-Set at bending point and double Stay at end point with 18 mm G.I. H.T. Stay, with required numbers of 11 kv T&C Disk Insulator and 11 kv Pin-Insulator,providing Coil earthing at each pole , Carping and Padding of Poles, Danger Board at each Pole with Anti-Climbing device etc. including cost of all labours, inspection and commissioning & writing on the Pole as per prescribed colour code, etc. complete as per the direction of the site engineer in charge & as per the provision made in the sanctioned estimate.

Construction and erection of 11/0.416 KV25KVA Star rated (3 Star) DP Sub-Station confirming to RE Rule 1956. Mounted on 2.44 mt. long structure, supported in 9 meter long 300 Kg PSC pole-2 Nos, Transformer Hard Channel & top Channel made of 2.8mt. long 100X50X6 mm MS Channel, transformer belting on 2.80mt. long 50X50X5mm M.S.Angle, ( all REC SPN. Std. F-3 ), with all accessories like, 3-pole 11 kv H.G. Fuse (F-5) and A.B. Switches (F-9) both mounted on 2.8 mt. long 75X40X6 mm M.S.Channel and supported by 1.0 mt. long 50X50X5mm M.S.Angle, with 3 nos. 11 kv Lightening Arrestor and L.T Distribution-Box including Kit Kat fuse for 25 KVA S/S, mounted on Box (75X40X6 mm)2.5 mt. long, Pipe Earthling (F-2), including cost of 55 sq.mm 3.5 core LT Cable ,connecting the supply line with 55 sq. mm AAA Conducter,providing 18 mm G.I H.T Stay as required ,Carping and Padding of Poles, Danger Board at each Pole, Anti-Climbing device, and all other necessary fittings i.e. required size nuts & bolts, brackets, Cable, Cable Sockets etc. including cost of all labours, transportation, complete with liaison for testing, inspection and commissioning& writing on the Poles as per prescribed colour code& fixing the display Board of required size & painting as per prescribed colour code and writing the salient features and taking photo of the S/S with beneficiaries present etc. complete as per the direction of the site engineer in charge & as per the provision made in the sanctioned estimate.

Construction of 3-phase, 4-wire LT line as per REC standard confirming to RE Rules 1956, with 8 meter long 200k.g PSC pole of 24 Nos., (3 X 35+1 X 25) sq mm XPE A.B.Cable required numbers of 16 mm LT GI Stay-Set at bending point and double Stay at end point with required numbers of Suspension clamp,Dead end clamp and LT Stay Insulator, providing coil earthing at each pole ,Carping and Padding of Poles, Danger Board at each Pole, Anti-Climbing device etc. including cost of all other Fittings, petty materials, all labours, with liaison for inspection and commissioning, & writing on the Pole as per prescribed colour code, etc.complete as per the direction of the site engineer in charge .& as per the provision made in the sanctioned estimate.

Providing boundary by Barbed Fencing with construction of retaining wall, (Base to Top Height 0.90 mtr) erection of RCC fencing post around the DP structure of size 4.50m x3.00 mtr having proper foundation as per drawing & SOUTHCo. specification ,Sand filling and metal spreading inside the boundary, Fixing of Iron grill gate etc. as per direction of Engineer-in-charge.

Cost of 32AMP Kit-Kat

Pipe earthing with No.8 GI wire using required quantity of common salt, charcoal , GI nut bolt including digging the earth pit of size 1.2mtr. X 1.2mtr.x3mtr. And digging the wire trench and refilling after completion of earthing including supply of all materials trnsportation etc. complete as per the direction of the site engineer-in-charge

Feasibility study of shallow T/w projects and avaling power supply Agreement