Renovation of Main Building, Pathway Parking Tiles and other Work in Honble Chief Justice Residence at Kanke Road, Ranchi (High Court Pool)

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including preparing cleaning the surface after cleaning removing dirt scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below.

1.The surface to be polished in rubbed with sand paper 80/120 no and then with sand paper of 160/180nos

2-Applying two coats of sealer with spray gun and allowing sufficient drying time for Ist coat and 2nd coat is allwed to dry for 8 to 12 hrs

3-On drying of sealer coat,wet rubbing with emery cloth of finer grading with ample wataer to rremove excess sealer layer and make the surface further smooth after this wet rubbing,then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc.Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allwed todry for 12hrs.

4.On this ,Ist coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in rerquired kproportion.This Ist coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth,which is further allowed to dry for 12 hrs.The final melamine polish is applieid with compressor pressure spray gun using melamine clear polish kand melamine thinneer mixed is required proportion complete as per direction of Engineer-in-charge.(Final coat to be done in 1 or 2 layers without gap of time)

Providing and laying polished Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawing with 18mm thick stone slab over 20mm (average) thick base of cement mortgar 1:4(1cement:4 coarse sand) laid and jolinted with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc all compelte as specified and as direction by the E/I.(polished Grantite stone slab colour of Black,cherry,Ruby Red or equivalent)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red - area of Slab upto 0.50 Sqm

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Marble stone flooring with 18mm thick Marble stone as per sample of marble approved by Engineer-in-charge over 20mm(average) thick base of cement mortar 1:4(1cement:4coarse sand) laid and jointed with grey cement slurry,includeing rubbing and polishing complete with.

Makrana white second quality

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Providing and laying polished vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrified floor tiles polished finish of (size 600x1200mm)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

75mm dia

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

Couplar 75mm dia

Coupler 110mm dia

Single pushfit coupler 75mm dia

Single pushfit coupler 110mm dia

Single Tee with door

Single Tee with out door

75mm dia

shoe(plain)

75mm dia

110mm dia

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete.

75mm dia

110mm dia

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade of: New work (two or more coats applied @ 1.43ltr/10sqmm over and including priming coat of exterior primer applied @ 0.90litre/10sqm))

Finishing wall with acrylic smooth exterior paint required shade of: old work (two or more coats applied @ 1.67ltr/10sqmm on existing cement paint surface

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Providing and Fixing factory made UPVC door frame made of UPVC extrudedsections of size 65 mm x 53 mm, having wall thickness 2.0 mm (± 0.2mm).,corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of size 28 mm x 30 mm mm having wall thickness 2 mm thickness (± 0.2 mm) including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineerin-charge

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Three track three panels sliding door with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile zinc alloy(zamak) powder coated handle on two panels along with multi point locking ksystem,adjustable nylon rollers with with SS 304 body using R4 series withframe (115mm & above)x(45mm &above)&both glazed ad fly screen sash (44mm & above)x(85mm &above)(Height above 2.5metre)

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Three track three panels sliding window with aluminium channel for roller track,wool pile,nylon rollers with SS 304 body using R1 series withframe (33mm & above)(35mm&above)(height upto 0.90metre)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Supply of stainless steel wire guage(Grade-304) aperture 1.4mm and 0.50mm dia wire including all complete job as per direction of E/I.

Providing and fixing bright finished brass tower bolts (barrel type) withnecessary screws etc. complete 250x10mm

ProvProviding and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. completeiding and fixing bright finished brass handles with screws etc.compelte. (125mm)

Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc complete as per direction of E/I.(200 mm)

Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges(hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screews including making necessary recess in board and finished etc complete as epr direction of E/I.

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500mm long with screews etc.complete as peer direction of E/I.

Providing and fixing stainless steel A ISI 304(18/8) kitchn sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever required kitchen sink without drain board(610x510mm bowl depth 200mm)

Providing and fixig P.V.C.waste pipe for sing or wash basin including P.V.C.waste fittings complete Flexibe pipe 40mm dia including all complete job.

Dismantlingtile work in floors and roofs laid in cement mortar including stacking material with in 50 metres lead for thickness of tiles 10mm to 25mm including all complete job as per direction of E/I.

Providing and laying matt finished vitrified tile of size 300x300x9.8mm havingwith water absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in for outdoor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar1:4 (1cement : 4 coarse sand) in all shapes & patterns including groutingthe joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing and faixing Bamboo jaffery/tencing consisting of superior quality 25mm dia(average) half cut bamboo placed vertically and faixed together with three numbers horizontal running members of hollock wood in scantling of section.including all complete job as per direction of E/I.

Finishing with Epoxy paint ( two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat,preparation of surface etc.complete job.(on concrete work)

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I.

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand) jointing with grey cement slurry @ 3.3kgk/sqm including grouting the joints with white cement and matching pigments etc. complete.(size of Tile 500x500mm)

Providing two coats of snowcem of approved shade and make over old surface including washing cleaning and preparing the walls, scaffolding , curing and taxes all complete as per building specification and direction of E/I.

Structural steel work riveted ,bolted or welded in built up sections ,trusses and framed work including cutting,hoisting,fixing in position and kapplying a priming kcoat of approved steel primer all complete job.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) of total coated thicness 0.50 mm (base metal of minimum o.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Stone Metal 20 km lead

Providing and fixing wall paper for wall product id 5116877-85857375854) including all complete job as per direction of E/I.

Providing and laying polished vitrified floor tiles in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved make in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)@ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily including all complete.(size 800x3000mm)

Supplying and Fixing Royal Taupe-Bathroom wall Tile (size 6x4) including all complete job as per direction of E/I.

Supplying and Fixing of Colston matrix shower pannel including all complete job as per direction of E/I.

Supplying and fixing of Kohler wall cistern (339291N-P-O) including all complete job as per direction of E/I.

Supplying and fixing of Kohler commode (339291N-P-O) including all complete job as per direction of E/I.

Supplying & Fixing PRAYAG Clamp Support and Holes with Screws and Back Support Rectangular Mirror PRAYAGR (CAT NO. PTA-50 (Mirror Cabinet 622 X 422mm)), Product id: 5116877-85696578361, Mirror Shape Rectangular Frame Without Frame Material Plastic Fixing Arrangement of mirror Clamp Support ,Holes with Screws ,Back Support Special Feature NA Width for Rectanguler, Diameter for Round, Edge for Square (inch) 5.1-7.5 Height/Length of Mirror for Rectangular/ Oval (inch) 5.1-7.5 Thickness of Mirror (mm) 3.5-4 Mirror Shape Rectangular Frame Without Frame Material Plastic Weight (Kg) 3.5 Frame Color NA Corners of Mirror Edged Fixing Arrangement of mirror Clamp Support,Holes with Screws,Back Support Fixing/ Fastening Kit included Yes

Supplying & Fixing PRIDE Bathroom Hand ShowerLeaded Brass Grade DCB-2 of IS1264/1997 PRIDE (CP Health Faucet), Product id: 5116877-8222644844, Thickness of Ni-Cr coating : Not less than ServiceCondition Number 2 ofTable 3 of IS 1068/1993 Types of Shower : Hand Shower Material : Leaded Brass GradeDCB-2 of IS 1264/1997 Inlet Length of Shower Pipe(mm) : 150 millimeter Shower Diameter / Length(mm) : 100

Supplying & Fixing JVijay Waste Fittings For Size 32 mm for wash basin Vijay (BRASS WASHBASIN COUPLING), Product id: 5116877-98475055076, Material of Waste Fitting : Brass conforming toGrade 3 of IS 292/1961, Nominal Size : 32 mm for washbasin

Supplying & Fixing Parryware Vitreous China Sinks /Wash Basins Other Pattern and Rectangle Parryware (PARRYWARE), Product id: 5116877-5580405717

Supplying & Fixing Supplying & Fixing PRIDE Two Way Valve Chrome Plated Alloy Steel 15 15 15 PRIDE (CP Bib Cock 2 in 1) Product id: 5116877-46224966212

Supplying & Fixing Jaquar Towel Rail Stainless Steel(SS 304) Jaquar(TOWEL RACK 600MM ACN-1181N JAQUAR), Product id: 5116877-95812522713, Thickness of Ni-Cr coating, Not less than Service Condition, Number 2 of Table 3 of IS- 1068/1993, Material - Stainless Steel(SS 304) Minimum Thickness of pipe - 0.75 mm, Color - Steel, Shape - open rectangle, Towel Ring Inner Diameter - N.A

Supplying & Fixing Jaquar Towel Ring Stainless Steel(SS 202) Jaquar(TOWEL RING SQUARE (AKP-35721P), Product id: 5116877- 4692558141, Thickness of Ni-Cr coating, Not less than Service Condition, Number 2 of Table 3 of IS- 1068/1993, Material Stainless Steel (SS 202), Minimum Thickness of pipe - 0.75 mm, Color - Steel, Shape - closed rectangle, Towel Ring Inner Diameter -N.A, Nominal Diameter of Pipe / Rod 18 mm, Length of Towel Rail(mm) - NA , Number of Mounting Bracket - 1

Supplying & Fixing Jaquar Leaded Tin Bronze Pillar Taps Jaquar (JAQUAR 15MM), Product id: 5116877- 79233252883, Material of Body , Body Components, Capstan Head and Leaded Tin Bronze Washer, Material of Spindle, Gland,Washer Plate and Nut, brass rod(extruded and rolled), Minimum Finish Mass - 650 gm for 15 mm Nominal Size Pillar Tape, Anti Splash Device fitted - No, Nominal Size (mm) - 15 ISI marked - Yes

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)