Partitioning in Lab for Sophisticated Instruments in Zoology Department in P.U. Campus, Sector-14 Chandigarh.

Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grad AC 10 as per IS : 1868) tranparent or dyed to required color shade with necessary screws etc.

125x75x4 mmm (Ref:- 9.95.1)

Providing and fixing aluminium sliding door bolts ISI marked anodises (anodic coating not less than grade AC 10 as Per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc.

250x16 mm (Ref:- 9.96.2)

Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868)transparent or dyed to required color or shade,with necessary screws etc.complete.

200x10mm (Ref:- 9.97.3)

Providing and fixing aluminium handles ISI marked.anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required color or shade, with necessary screws etc. complete.

125 mm (Ref:- 9.100.1)

Providing & Fixing aluminium work for doors,window,ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight , mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws , all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately):

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50 micron) (Ref:- 21.1.1.2)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum (Ref:- 21.1.2)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixied in alumium doors, windows shutters and partition frames with C.P brass/ Stainless steel screws etc. complete as per architectural drawings and directions of engineer- in - charge.

Pre- laminated particle board with decorative lamination on both sides. (Ref:- 21.2.2)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge

With stainless steel cover plate minimum 1.25 mm thickness (Ref:- 21.4.1)

Providing and fixing 5mm thick (2layers) float glass panes in existing partition with EPDM gasket etc. Complete in all respect to the entire saticification of the engineer in charge.

Wall side modular labroratory table overall dimension 3100mm (L) X 675MM (D)X 838MM (H) modular lab table shallm consist of storage cabinets 8 nos of 750mm (L) having twin swing door and one shelf and leg space. The specification as per manufacturer and duly be approved by Engineer-in charge at site(Ref:- N.S)

Exsisting Aluminum Partition to be shifted and fixing with necesaary screws etc. Complete in all respect to the entire saticification of the engineer in charge. (Ref:- N.S.)

Please Enable Macros to View BoQ information