Special Repair of Primary Health Centre at Village Bangaon in Fatehabad Distt.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth (HSR 6.6)

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing(hsR 8.5 (b)

Removing door and windows (wood and steel) with chowkats by making Recesses in walls when the wall is not to be dismantled:-(HSR 8.18(b)

Scraping of white wash and colour wash (HSR 8.32 (a)

Scraping of Cement plaster.(HSR 8.32 (c))

Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.38)

Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect. [HSR. 10.82 + 10.95 (a)].

Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (Straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centring and shuttering, laid in position complete in all respects. [HSR. 10.86 + 10.95 (a)]

Damp proof course 75 mm thick of cement concrete 1:2:4 using stone aggregate 20mm nominal size with 2 coats of bitumen 20/30 penetration, at 1.65 Kg per sqm laid hot and sanded. (HSR 10.114)

First class brickwork laid in cement sand mortar 1:6 in foundation and plinth. (HSR 11.2)

First class brickwork laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level. (HSR 11.7)

Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 87.50 mm mud filling on a layer of 25mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg. per sqm on the top of R.C.C Slab including grouting with cement sand mortar 1:3 and top surface to be left clear etc. (HSR 13.13)

Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50)

Cement concrete 1:2:4 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified.(HSR 13.64)

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.89) (a) 100 mm dia PVC pipe 6 kg. pressure

150 mm dia. PVC pipe 6 kg. pressure

Pdg. & fixing PVC Bend ISI mark (HSR 13.90 (a)) 100mm dia

150 mm dia

Base course of floors consisting of 10mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1)

PVDG & fixing ceramic tiles/anti skid tiles of size 400mmx400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles.Note: Tiles shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA , SOMANI,ORIENT & JOHNSONS. (HSR 14.91) In First Storey

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colors shades except burgundy bottle green, black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry inluding pointing in white cemet mixed with pigement of matching shades complete. Size 300x450 mm. (HSR 14.92 b)

12 mm thick cement plaster 1:4 (HSR 15.5)

Plastering on wall 12mm thick cement plaster 1:6 (15.7)

Plastering on wall 15mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

10 mm thick cement plaster 1:3 under celling . (HSR 15.51)

Cement pointing 1:3 flush on brick and tile walls(HSR 15.63)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces.(HSR 16.25)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work.(HSR 16.58)

Provinding two coats of exterior acrylic emulsion paint (b) 1st Qlty. (HSR 16.79 (b))

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (HSR 16.81)

Pdg & fixing aluminium work for door and windows,ventilatiors and partitions with Z section IS, 773 and IS,1285 complete all resp. (HSR 17.96)

Pdg & fixing 12 mm thick prelaminated particle board three layer IS: 12823 grade I & II fixed in aluminium door (HSR 17.97(b)) Both side lamination

Pdg & fixing aluminium Handle of outer dia 100 mm with screw etc. (HSR 17.102 iii)

Cost of aluminium fitting complete for door and window such as tower bolts , handle complete with fiting (HSR 17.72 (b))

Pdg. & fixing glazing in alluminium door window etc. (HSR 17.98 b) 5mm thick

Pdg. Alluminium jali of thickness 7mm thick with opening 75x 75 mm thick (HSR. 17.100 )

Providing and Fixing parking shed of japani sheet as per approved color with 25 mm thick square MS tube frame of 450 x 450 mm spacing and outer support with 50 mm square tube and vertical post 75 mm dia MS pipe with cement concrete 1:2:4 foundation including cutting, welding, all size screws, nut bolt and placing in position as direction by Engineer-In-Charge (NS)

Fe-500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding & placing in the position complete. (HSR 18.22) (Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work, excluding overlaps. From the length so measured, the weight of reinforcement shall be calculated in tones on the basis of IS:1732.Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing, shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement).

Public Health Items Pdg. & fixing G.I Pipe (NS) 15mm dia

20mm dia

25mm dia

EXTRA FOR Pdg. And FIXING AND JOINTING UNION COUPLING IN G.I. AND W.I PIPELINES.(NS) 15mm dia

20mm dia

25mm dia

CUTTING HOLES UPTO 23 CM SQUARE THROUGH STONE MASONARY OR BRICK WORK IN CEMENT WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required.(HSR 28.24(b)) 22.86cm thick wall

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY C.I. LOW LEVEL VITREOUS CHINAWARE CISTERN complete with flush bend all other necessary Fittings instead of C.I high level cistern complete with fittings.(HSR 30.12 (i)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with C.P Brass screws complete in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.(HSR 30.67 (b)(i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.(HSR 30.68 (b)(i))

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC.(HSR 30.69 (a) (i))

EXTRA FOR Pdg. And FIXING AND JOINTING UNION COUPLING IN G.I. AND W.I PIPELINES.(NS) 15mm dia

20 mm dia

25 mm dia

25 mm dia

Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) European type water closet suite, syphonic type consisting of (HSR 30.5) (a) Single trap Syphonic W.C. Suite (ii) Single colour b) (ii)

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid.(HSR 30.13 (i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLAT BLACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH consisting of:-(HSR 30.19(i))

PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of (HSR 30.41 (v)) 560mmx 450mm size

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the walls etc. (HSR 30.70) (a) C.P.BRASS (i) Soap dish large

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHROMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.71) (a) INDIAN MAKE (i) 600 mm X 450 mm

Providing and fixing in position 15mmi/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). C) Bib Cock (HSR 30.75)

Providing and fixing in position brass stop cocks (as approved by the Engineer -in-charge). (HSR 30.76)

Providing and fixing in position automatic brass ball valves in tank. (HSR 30.110) (b ii)

Providing and fixing HDPE WATER STORAGE TANKS of approved make with covers/Lids marked with IS:12701 on roof Top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge (except civil work) (HSR 30.119) 1000 ltrs Capacity

Pdg. & fixing G.I Pipe (HSR 30.120) 15mm dia

20 mm dia

Pdg. & fixing Gun Metal Peet Valves (HSR 30.121) 15mm dia

20 mm dia

SHREE GANESH TRADERS