Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹52.0 LAccepted-AOC H NO 199 W NO 6 NEAR OLD SDM OFFICE DISTT HAMIRPUR HP 177001 | HAMIRPUR | HAMIRPUR | HP | 177001 | L 1 | Accepted-AOC AOC Done | |
| 2 | L 2₹52.9 L+₹97,105 (1.87%)Rejected-Finance MAIN BAZAR GHUMARWIN DISTT BILASPUR HP 174021 | BILASPUR | HIMACHAL PRADESH | 174021 | L 2 | Rejected-Finance L 2 | |
| 3 | L 3₹61.7 L+₹9.7 L (18.7%)Rejected-Finance VILLAGE DINAK P O KANAID TEHSIL SUNDERNAGAR | BILASPUR | HIMACHAL PRADESH | 174001 | L 3 | Rejected-Finance L 3 |
Tender Value
₹53.5 L
EMD Value
₹86,100
Closing Date
2 Nov 2021, 5:00 pmClosed
EE Elect division HPPWD Una
EE Elect division HPPWD Una
Providing E.I. therein
2021_PWD_53101_1
Mother Child Health Care Centre
Open Tender
Electrical Works
Item Rate
730 days
Una
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,000
₹86,100
3 Feb 2023
25 Oct 2021
3 Nov 2021
25 Oct 2021
2 Nov 2021
25 Oct 2021
Amount
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Make:-Legrand(Myrius),L&T(Oris),Anchor(Roma Plus).
Group-C
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connections etc. as required.(Make:-Legrand(Myrius),L&T(Oris),Anchor(Roma Plus).
Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required(Make:-Legrand(Myrius),L&T(Oris),Anchor(Roma Plus).
Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 6 modules(205mmx78mmx50mm on surface or in recess with suitable size phenolic laminated sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs)(Make:-Legrand(Myrius),L&T(Oris),Anchor(Roma Plus).
Supplying and fixing following rating Modular switch /socket on the existing switch box / cover including connections etc. as required. (Make:-Legrand(Myrius),L&T(Oris),Anchor(Roma Plus).
S.P. 5/ 6 Amps one way Modular switch.
Bell Push (Modular )
5 pin, 5/ 6 Amps Modular socket outlet.
Supplying and fixing LED panel fiiting, sq type 225x225 mm, 18 watts made from extruded aliminium housing ,Aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing LED panel fiiting, sq type 162x162 mm, 18 watts made from extruded aliminium housing ,Aesthetically designed flat panel for recess mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing LED panel fiiting, 20 watt 1x1 ft, ,Aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required as per item codeLSVRO01S020XC (Jaquar Make)or its equivalent make as approved by the Engineer-in-Charge. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing LED panel fiiting, 24 watt 1x1 ft, ,Aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required as per item codeHLFPS11-02-24-CW( Halonix) or its equivalent make as approved by the Engineer-in-Charge. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5years warranty..
Supplying and fixing LED panel fiiting, sq type 2x2 ft, 36 watts made from extruded aliminium housing ,Aesthetically designed flat panel for recess mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and Fixing LED Battan 20watt High quility aluminium extruded with decorative end caps of superior quality ( Jaquar Make ) as per item code LGLZPCX020XC as required. Complete in all respect and as approved by the Engineer-in -Charge.Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Providing, Installation, testing and commissioning of Glazed LED 36Watt Batten High quality design aluminum extruded decorative end caps as per best satisfaction of Engineer-in-Charge. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing LED panel fiiting, sq type 4x1 ft, 36 watts made from extruded aliminium housing ,Aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing LED panel fiiting, sq type 4x1 ft, 42 watts made from extruded aliminium housing ,Aesthetically designed flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with connections etc as required. Make- Jaquar (LSVRO03S042XC)or its equivalent or as approved by Engineer in charge.
Providing, Installation, testing and commissioning of Glazed LED 10Watt Batten600mm long( Mirror Light) High quality design aluminum extruded decorative end caps as per best satisfaction of Engineer-in-Charge.Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Supplying and fixing fancy wall bracket of metal & synthetics white colour of superior quaility with B22 lamp holder complete with all accessories,including making connections, testing etc. as required. Make- Jaquar, Philips, K-lite or its equivalent or as approved by Engineer in chargehaving power factor >.9,Efficacy >100 lumens/watt,THD <10,CRI >80 with 5 years warranty..
Providing, installation testing and commissioning of ceiling fan with regulator including wiring the down rods of standard length (up to 30cm) and 16/0.20mm twin twisted flexible cotten braided copper cable including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc as required including carriage of material within all leads and lifts. ( Usha Technix,Bajaj Ultima( Minimum 3Star rating) or as approved by the Engineer-in-Charge.1200mm
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-
S/F of Exhaust Fan (plastic)with louver shutter 300mm 1000 RPM1125 Air Delivery (CMM) Bajaj make Dxi model on the existing opening complete with connection etc. as required.
Supplying and fixing bakelite batten/angle holder including connections etc. as required:-
Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-
25 Liter capacity water heater (Cat-A)Bajaj/Usha/Racold
35 Liter capacity water heater (Cat-A)Bajaj/Usha/Racold
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVCconduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. .MAKE:-Polycab,,KEI,Anchor or as approved by the Engineer-in-Charge.Polycab/KEI/Anchor.
2x1.5 Sq. mm.
2x2.5 Sq. mm.
2x4.0 Sq. mm.
2x10 Sq. mm.
Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required..MAKE:-Polycab,,KEI,Anchor or as approved by the Engineer-in-Charge.Polycab/KEI/Anchor.
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-(HevellsI/Polycab or its equivalent make)
Armoured cable 400 sq. mm (3.5 core)
Armoured cable 240 sq. mm (3.5 core)
Armoured cable 95 sq. mm (3.5 core)
Armoured cable 35 sq. mm (3.5 core)
Armoured cable 25 sq. mm (four core)
Armoured cable 16 sq. mm (twin core)
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-(Make:-L&T,Legrand,Schneider)
Double door-8 way
Double door-12 way
Double door-16 way
Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Make:-L&T,Legrand,Schneider)
Single pole. Cat-A.
Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-(Make:-L&T,Legrand,Schneider)
Double pole. Cat-A.
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
Extra for using salt and charcoal for pipe earth electrode complete as required.
Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.
Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.
Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run)
Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run)
Providing & Fixing on wall face PVC (D-Plast rain water pipe on working pressure not less than 4.5Kg/sqm including filling the joint with approved adhesive complete.
100mm dia pipe
Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required.(Make:-L&T,Legrand,Schneider).
63 Amp. Category-A
Supplying and fixing sheet metal bus-bar chamber suitable for 63 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (16mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx350mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-(Make:-L&T,Legrand,Schneider).
Supplying and fixing Inverter type Split AC of 1.5 ton capacity Hot & Cold including voltage stabilizer 4 KVA with Two Stage Steady Cool Compressor of High EER Rotary-BLDC type with Wide Operating Voltage Range of 145~270 Volts, with features Cool/Heat Mode, Anti Dust, Catechin Filter, Dual Temp. Display ,4 STAGE FILTRATION ADVANTAGE, 100% copper including testing, commisioning etc complete in all respects. Make: Voltas, O General, Mitsubishi.
Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-25mm dia.
Ratwan Light House
Bhardwaj Electrical Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .