REPAIRS TO FLOORING WALLING JOINERIES PLASTERING ROOFING PLUMBING PLINTH PROTECTION ROLLING SHUTTER SANITARY FITTINGS ETC FOR BUILDING UNDER MAINTENANCE REPAIR TO CONCRETE ROAD/PATH AND HARD STANDING AT NAVY COAST GUARD STATIONS AT KAVARATTI ANDROTH

Amount

Demolition of brick work, stone / boulder / PCC block masonry built in cement or cement lime mortar complete all as specified and directed

Material and labour for pre cast cement concrete block masonary with solid blocks exceeding 10 cm width type C1 1:3:6 ( using 20 mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and directed

Material and labour for plain cement concrete type B1, 1:2:4 using 20 mm graded stone aggregate as top/wearing layer of floors 50 mm thick, spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish outside MD land complete all as specified and directed

Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (Square or rectangular as directed by the Engineer in Charge) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured or white cement to match the coloured tiles over and including screed bed base 20 mm thick in CM 1:6 complete all as specified and directed Note: Quoted rate shall be inclusive of screed bed.

Material and labour for glazed coloured ceramic tiles 350mm X 250mm X 7mm / 450mm X 350mm X 7mm thick in vertical surfaces such as skirting or dado set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the coloured tiles over and including a backing coat 10mm thick in CM 1:4 complete all as specified and directed Note: Quoted rate shall be inclusive of backing coat

Material and labour for preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over 3 mm thick wall care putty complete all as specified and as directed

Resecuring or easing and adjusting, without taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening including taking down easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed by Engineer in charge.

Material and labour for applying one coat of epoxy floor paint over concrete surface or chequered tiles complete all as specified and as directed

Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid , rounded or chamfered, put together with glue pinned at joints including taking down old chowkats and frames complete all as specified directed

Supply and fix 40mm thick flush shutters, solid core construction,with block board core and plywood face panels commercial type on both slides/both faces is covered with decorative face veneer with lipping/frame to match including taking down old door complete all as specified and as directed

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and as directed

Supply and fix factory made solid panel PVC door shutter 28 to 30 mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and as directed

Supply and fix 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed complete all as specified and as directed

Supply and fix 300 mm length aluminium alloy anodised sliding door bolt with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and as directed

Supply and fix in repair 300 mm length aluminium alloy anodised sliding door bolt with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and as directed

Supply and fix 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed

Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Material and labour for Preparing new or previously untreated wood surfaces of any description over 10 cm width or girth and applying two coats of synthetic enemel paint over a coat of pink primer complete all as specified and as directed

Supply and fix in repair sheet glass, 4mm thick ordinary quality and glazing with oil putty in square n exc. 0.50Sqm in each pane complete all as specified and as directed

Supply and fix in repairs 150mm length aluminium handles, cast type, anodised complete all as specified and as directed

Supply and fix in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, overall length of cover plate shall be 140 mm complete all as specified and as directed

Supply and fix in repairs PVC low/ high level flushing cistern 10 litres capacity with dual flush fixed all as specified and directed with necessary fitting and connections complete all as specified and directed Note : The quoted rate shall be inclusive of brackets,ball valve,PVC inlet connection 45cm long 15mm dia with brass check nuts and connection to stop cock and PVC flush pipe.

Fixing Only vitreous china wash hand basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and provision of fixing of brackets and placing of stand, chromium plated waste coupling with long screwed shank, fly nuts, flange, washers, waste pipe, brass unions complete all as specified and directed Note : Wash basin shall be issued under schedule B.

Supply and fix in repairs fancy type bib taps, 15mm bore, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe complete all as specified and as directed

Supply and fix in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed

Supply and fix in repairs fancy type pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed ( Cat No. CQT-CHR-23021B of Jaquar or its equivalent in list of makes)

Fixing only white vitreous china wash down water closet (Pedestal pattern) including plastic seat cover white with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete, closed pattern with flat bottom excluding flushing cistern and connecting to existing outlet pipe complete all as specified and as directed NOTE : itreous china wash down water closetr will be issued under schedule B.

Supply and fix in repairs CP pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed

Fixing only Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weigh between 61 to 80 kg and fixed complete all as specified and directed NOTE : Hydraulic door closer will be issued under schedule B.

Supply and fix in repair Aluminium window shutter with taking down existing unserviceable folding hinges top and bottom including all fittings and fixtures complete all as specified andas directed

Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed

Supply and fix in repairs 15mm dia stop valves, fancy type,cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule, as fixed complete all as specified and as directed

Supply and fix in repairs 15mm dia stop valves, fancy type,cast copper alloy, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule, as fixed complete all as specified and as directed

Taking down cement plaster of any description from brick,concrete or stone walls including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed

Material and labour for 15 mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) complete all as specified and as diretcted

Material and labour for 10 mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) finished even and fair without using extra cement complete all as specified and as diretcted

Supply and fix in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed

Material and labour for rolling and consolidating formation surface (in cutting) with hand roller exc 0.2 tonn and n exc 0.5 tonn complete all as specified and as diretcted

Material and labour for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface complete all as specified and as diretcted

Supply and fix in repair 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed

Material and labour for 100 mm thick Plain cement concrete 1:4:8 Type D2 using 40 mm graded stone aggregate complete all as specified and as directed

Material and labour for 100 mm thick Plain cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate and surface finished even and smooth without using extra cement and finishing the surface by brooming complete all as specified and as diretcted

Material and labour for 75 mm thick Plain cement concrete 1:3:6 Type C2 using 40 mm graded stone aggregate complete all as specified and as diretcted

Material and labour for forming construction joint 30 mm deep and 10 mm wide filled with sealing compound Grade B complete all as specified and as diretcted

Material and labour for forming expansion joint 20 mm thick filled with preformed bituminuos filler and top 30 mm primed and sealed with sealing compound grade A , for 100 mm thick concrete slab complete all as specified and as diretcted

Material and labour for preparation of new plastered surface in walls, soffits, facias roof and applying 2 coats of weatherproof acrylic based paint, 100% acrylic, over a coat of exterior wall primer complete all as specified and as diretcted

Material and labour for painting lines, dashes, arrows, letters etc on roads, pavements and the like exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and as diretcted

Material and labour for painting lines, dashes, arrows, letters etc on roads, pavements and the like n exc 10 cm wide with road marking paint, white or golden yellow complete all as specified and as diretcted

R.K. Builders

Jack Electrolinks Private Limited