PROVN OF COVERED SHEDS FOR B CLASS VEHS (04 X ALS) FOR A COY IN (MT) AT MIL STN KALKA UNDER GE (I) JUTOGH

Amount

Demolition of cement concrete in ground floors and pavings n exc 15cm thick (below or above GL), complete all as specified and directed.

Excavation over areas exc 1.5 m and getting out in soft/ loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m depth for foundation footings, plinth beams etc in soft/ loose soil, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, sub base or levelling course complete all as specified and directed

M&L for MS TMT Bars 10mm dia and over cut to length, bend to shape required, incl cranking, bending, for hooping for columns, hooking ends and binding with and incl MS wire (Annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per Srl item No. 05.00 above but for 6 to 8mm dia etc., complete all as specified and directed.

M&L for Mild Steel TMT bars, 5mm dia and over upto and incl 10mm dia as in stirrups, spacers, binders etc cut to shape requred, incl cranking spirally for hooping for columns, hooking ends binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed.

M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed.

M&L for form work to sides of pillars, posts, struts, piers, columns & stanchions including fair finishes of surfaces complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick (horizontal or sloping including fair finished surfaces of concrete complete all as specified and directed.

M&L for form work to sides & soffits of floor or roof beam beam haunchins girders bressumers lintels cantilevers shelves including over hang supports etc. including finish surface complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, breaks in floor & roofs, concrete railings, n.exc 20 cm wide horizontal or sloping and similar works exc 10 cm but n.exc 20 cm wide, rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC M-25, (Design mix), using 20mm graded crushed stone aggregate for foundation, includng column footings, plinth beams, bases for columns, etc complete all as specified and directed.

M&L for RCC M-25, (Design mix), concrete using 20mm graded crushed stone aggregate for column, pillars piers posts and struts etc complete all as specified and directed.

M&L for RCC M-25 (Design mix) (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressumners, lintels over 1.5m span, complete all as specified and directed.

M&L for RCC M-25 (Design mix), using 20mm graded crushed stone aggregate for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

M&L for brick work with fly ash bricks confirming to IS12894, designation 7.5, class 'A' straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

M&L for providing PCC 1:2:4, Type B-0, using 12.5mm thick graded crushed stone aggregate as in louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete or stone surfaces in CM 1:4 finished even and fair (without using extra cement) with water proofing compound, including necessary scoffolding and T&P of any height, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 10 mm thick on other than fair faces of brick or stone masonry surface in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:3) on ceiling finished the surface even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound as approved complete all as specified and directed.

M&L for broken brick/stone or boulders for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C-2, (using 40mm graded crushed stone aggregate) as in plinth protection and path finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8, type D-2 , (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.

M&L for preparing new plastered wall surfaces and applying three coats of white wash, complete all as specified and directed

M&L for preparing new plastered ceiling surfaces and applying three coats of white wash, complete all as specified and directed

Returning filling in including spreading, levelling watering & well ramming in layers nexc. 25 Cm thick in each layers complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC conduit 20mm concealed wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light/fan point control by one, one way switch complete all as specified and as directed.

S & F switch piano flush type single pole, one way, white in colour, 5/6 Amp complete all as specified and directed

S&F ceiling rose, surface type, 240V, 50Hz, 6A, 3 Plate, white in colour, bakelite 65x50mm three terminals complete all as specified and directed

S&F LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with 3core flexible copper conductor cable of suitable size from ceiling rose including taking down old unsv fitting complete all as specified and directed.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400 mm size, 240 Volts, 6Amps, 100W, deluxe, white in colour, complete all as specified and directed.

M&L for factory made steel metal enclosures double door type made out of CRCA 1.2mm thick, MS sheet, powder coated, SPN DB with 200Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly connected in wall/ fixed to columns, factory made, incl making good disturbed surfaces with matching colour, complete all as specified and directed.

M&L for factory made steel metal enclosures double door type made out of CRCA 1.2mm thick, MS sheet, powder coated, SPN DB with 200Amps rated bus bar, 4 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly connected in wall/ fixed to columns, factory made, incl making good disturbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN 32 Amps 240 V, 10 KA, 'B' curve incl all terminals, fitting etc complete all as specified and directed.

S&F MCB SP 06 to 40 Amps 240V, 10 KA, 'B' curve incl all terminals, fitting etc complete all as specified and directed.

M&L for sub main wiring with two runs of single core 2.5 Sqmm (nominal area) PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 grade FRLS-H cable drawn and PVC rigid conduit 20 mm dia with all necessary fittings and accessories and one run of PVC insulated and unsheathed single core cable with copper conductor of size 2.5 Sqmm as earth wire (green in colour ) run through PVC rigid conduit and connected to common earth dolly , including taking out the old sub main wiring complete all as specified and directed. Note:- Two run of cable and one run of PVC conduit and one run of earth continuity wire shall be measured as one run complete all as specified

R. P. Suppliers and Construction Co. (BID ID -3181184)

m/s jupiter builders (BID ID -3175111)

S.R.SHARMA & SONS (BID ID -3175220)

M/S Dahiya Builders (BID ID -3175131)

NSK TRADER (BID ID -3175095)

NARINDER KUMAR SONS (BID ID -3175567)