SPECIAL REPAIR TO REPLACEMENT OF SWIMMING POOL FILTRATION PLANT AND CONNECTED ITEMS AT MO MB GHATKOPAR AND HAMLA UNDER GE NW BHANDUP

Amount

Taking down unserviceable filtration plant with connected items such as sluice valve, CI pipe lines, CI fittings, NRVs, Motors, cables, and LT Panels, installed at swimming pool and deposited to MES store yard complete all as specified and directed.

Taking down old unserviceable swimming pool CI pipe of 150 mm complete all as specified and directed.

M& L for coloured Non skid,girm proof and waterproofing ceramic tiles in any shade 7 to 8 mm thick (square and rectangular) for simming pool,the area of each tile exc 0.06 sqm but not exc 0.11 sqm in floor etc set And jointed in neat cement slurry and pointed in white cement to match as in repair and patches including 15 mm thick rendering/screed bed cm 1:3 including Dr. fixit waterproofing compound all as specified.

Material and labour vertical MS pressure filter of size 4'(Feet) 6"(inch) dia 4'(Feet) hight with sheet thick 8 mm dish encls thick 8 mm 8 mm filter plate thick 10 mm support with 5" NB pipe(4Nos) with fitting asos manhole:inlet outlet connector, pressure guage,Air release sample water connector and drain connector as per requirement the tank is designed for a workingpressure of 3.5 Kgs/Cm2 filter media of 3' feet - 6" hight above filter plate is of 4 grades filter media sand size pebble 2/4, 8/16, 16/30 white quartz sand. filter nozzal.

Matrial & labour Cast Iron pipes with flaged ends,centrifugally cast class-A in any length laid in trenches of size 100 mm Dia complete all as specified and directed.

Supply and lay in replacement CI fittings such as bends, ( any type, radious and angle) elbows, tees, sockets, etc. upto 100 mm dia CI pipes

Supply and fix sluice valve of size 100 mm long type with cast iron body bonnet wedge stuffing box gland thrust plate hand wheel of grey cast iron spindle of stainless steel nut body seal ring and wedge facing ring lead tin, bronze bolt nut of high carbon steel bounate gasket of compressed fibre glands packing of jute having flanged & drill type nominal pressure rating, PN 1.6 i.e 10 kgs/Sqcm unit conforming to IS -14846-2000 including material & labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washer etc including necessary earth work. complete all as specified and directedMake : Kirloskar/Leader/L&T (Audco)/Zoloto

Supply and fixing Tee type stainer 100mm dia complete all as specified and directed.

Material and labour NRV 100 mm with cast iron body including maaterial and labour for jointing flanged joint with rubber fibre jointing ring bolt nut & washers etc including necessary earth work if any complete all as specified and directed.

Supply and fixing 3 Layer Poly propylene random polymer (PPR) SDR7.4/PN10 pipe outer dia 160mm flanged end uv stabilized and antimicrobial including brass threaded fittings, making hole complete with nozzle all as specified and directed.

Matyerial and labour pressure gauge ISI mark compele allas specified and directed.

Supply and fixing filter air line ISI mark complete all as specified and directed.

Supply and fixing Three Phase self priming centrifugal Monoblock Pumpset KDS 1030++, Pipe Size Suc. X Del. (mm) 100 x 100, Code-D12011000110, Power Rating 10 HP (7.5 kW), Speed 3000 RPM, Head Range 12-28 Meter, Flow Range 1080-1920 LPM, Indian Standards specifications, including with IP-44 protection, Class 'B' insulation, Designed to prevent overloading and motor burning, Dynamically balanced rotating parts ensure minimum vibrations, Replaceable wearing parts,automatic air release during priming, coating cast iron components long life & rust free complete all as specified and directed.

Supply and fixing 12" x 12" SS 316 plate complete all as specified and directed.

Supply and fixing SS 316 glass nozal for pool complete all as specified and directed.

Supply and fixing swimming pool suction pumpset 3 HP motor and cupland pump set with4 wheel trolly 2 feet length CI Suction sweeper with brush 50 mm PVC section pipe 30 Mtr, including 30 Mtr 2.5 sqmm flexible cable 4 core, 50 mm hose nipple with clamp 25 mm rope 60 mtr with centrifugal self priming MCCB DOL starter 1 set, 200 mm floting ball 10 nos complete all as specified and directed.

Supply, Lay, Test & Commissioning cable LT XLPE insulated and screened PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade of Size 120 Sqmm, 3.5 core complete all as specified.

M&L for repair to pressure type water filtration plant vertical type comprising of following activities. (a) Open the manhole cover by removing the nuts, bolts, washer and packing and take out the existing filter media and depositing all as directed. (b) Clean the inner surfaces of water filter and check for leakage if any and provided necessary spot welding for leakage all as per manufacture instruction supply and fix in replacement the top and bottom manhole cover made of 6 mm thick MS plate of 1m dia including provision of necessary nut bolts and washer to match with the existing supply and in replacement the header made out 50 mm dia GI pipe (Approx 3.60m long) medium grade and with sprinkler holes of PVC nozzle of 2" long (Approx 80 Nos and 1/8" dia) with expanded mouth of match with the existing treat the internal surface of the filter by appling one coat of anticorrosive paitt after preparation of the surface . © Supply and lay fresh filter media of the following sizes and thickness. (i) Garvels/Pebbles 6 to 12mm size 75mm thick (ii) Garvels/Pebbles 3.15 to 06mm size 75mm thick (iii) Garvels/Pebbles 1.5 to 3.15mm size 75mm thick (iv) Fine sand 200m thick Note :- Complete removal of existing treatment of external surface of water filter and apply two coats of aluminium paints over a coat of red oxide primer.

Supply and installation and testing and commissioning of floor mounted indoor type LT Panel CPRI approved dust and vermin proof factory fabricated made out of not less than 2 mm thiick stainless steel sheet with seven tank procress powder coated and 50 x 50 x 6 mm angle iron frame on PCC foundation 1:3:6 type C 1 platform with all accessories and control gears for running the swimming pool plant suitable for operation on 3 phase 50 cycles 415 volts including necessary electric copper AC plant suitable for operation on 3 phase 50 cycles 415 volts including necessary electric copper wiring with 1100 volts grade single core PVC insulators FRLS multistranded copper conductor cables of suitable current carrying capacity complete comprising of the following accessories. Heater bank, connection the provided in LT panel (a) Change over switch 200 Amp 4 pole -01 No (b) MCCB 4 pole 36 KA 200 Amp-01No (c) LED RYB Indicators lamp -01 Set (d) VAF Meter-01 No (e) Am Meter-05 Nos (f) S/D Starter 10 HP-03 Nos (g) DOL Starter 5 HP-02 Nos (h) MCCB 4 pole 25KA 32 Amp -03 Nos (J) MCCB 4 pole 25 KA 40 Amp-02 Nos (k) MCCB 4 pole 25 KA 63 Amp -01 N (l) Copper bus bar 300 Amp (RYBN) Make of MCCB : Legrand/Schneider/Seimens and Make of Starter L&T

Unity Enterprises

M/S SOMANATH ENTERPRISES