Special repair work of Type B 20 house located at Boundary Road 215 Civil Lines Meerut

Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). (DSR15.56 )

M.S. or iron work of small sizes and section such as MS gril holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. For varandha closing (DSR.N.10.1)

Supply & fixing of Indian Commercial flush shutters 35 mm. thick including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings also including their supply and including painting with two coats of black Japan on all iron fitting if necessary.(DSR.N.9.21.1)

Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) (DSR.N.9.7.1)

Brick work with common burnt clay(non modular)bricks of class designation 7.5 in cuperstructure above plinth level all shapes and size including all materials labour T & P as DSR.N.6.4.1

12 cm thick plaster with cement and corse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (DSR.N.13.4)

Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats (DSR.N.13.8)

Supply and fixing Galvanized Mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of of C.P. teak wood batten 8 cmx1cm.(3''x3/8'')/Flat iron 25 mmx4mm and including supply of all materials labour Tool & plants etc. required for proper completion of the work.(DSR.N.9.51.1)

providing and fixing ISI marked flush door shutters conferming to IS:2202 part -I, decorative type coreof block board construction with frame of 1st class hard wood well matched teak 3 ply veneering with 25 mm thick (for cuoboard) all same as DSR.N.9.20.3

Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of (SI No 9.88)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR.No 9.100.1)

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or byed to required colour or shade with necessary screws etc complete (DSR.N 9.97.1)

Providing and laying ivory or light shad vitrefied tiles in different size in flooring or skirting finishing with cement slurry and with pigment grouting and polishing complete including supply of all matrials labour T&P etc. requred for porper completion of works, (DSR.N.11.47.2)

Painting or varnishing work in small areas or new wood work with two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. (DSR.N.13.58)

Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (DSR.N.13.41.1)

Finishing wall with water proof weather coat of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work (DSR.N.13.44.1)

P/L ( white coloured ) kajaria tiles, Romano tiles 300X300mm or more over walls or in flooring over 20 mm thick base of cement mortar in 1:4( one cement : 4Coarsened Lead and Jointed with white cement with pigment slurry including ribbing and polishing complete in all respected complete (DSR.N.11.37)

Providing and fixing water closet squattaing white Vitreous china Orissa pattern W.C. pan of size 580x440mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required (DSRN.17.1.1)

Supply and fixing of CP brass bib cock/stop cock including supply of all material labour T&P etc complete (DSR.N.18.49.1)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR17.7.1)

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required Range of three squatting plates with 10 litre P.V.C (DSR 17.6.3) automatic flushing cistern

Providing & Fixing Satinless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets, and stainless steel plug 40mm including painting the fittings and bracket cutting and making good the walls wherever required. Kitchen sink with drain borad 510x1040mm bowl depth 250mm (DSR No. 17.10.1.1)

providing and placing on terrace (at all floor levels)polyethylene water storage tank.IS:12701 marked with cover and suitable locking arrangement and making necessary hole for inlet,outlet and overflow pipe but without fittings and the base supports for the tank as DSR.N.18.48

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed bythe Engineer-in-Charge a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent (DSR No 8.2.1.2)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.1)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.2)

Supply and fixing of 110 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.2)

Supply and fixing of 75 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.1)

Providing and fixing 15mm dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (DSR-17.22b)

Reinforced cement concrete work in beams,suspended floors,roofs,having slopes up to 15degree landings in 1:1.5:3 cement ,coarse sand and 20m size stone aggregate all same as DSR,No.5.3,same but excluding shuttering,centering and renforcement etc.

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.DSR.N.5.22A

Providing laying brick tiles over mumti roofs grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement over 12mm layer of cement mortar 1:3 and finished with neat.(with common burant clay F.P.S(non modular)brick tiles of class designation 10.DSR,N.12.19.1

1:4:8,(1cement :4coarse sand :8graded stone aggregate 40mm nominal size derived from natural sources,DSR.N.4.1.8

Dismantling lime concrete manully/by mechanical means and disposal of material eithin 50meters lead as E.I,DSR.N.15.1

Providing corrugated G.S.sheet roofing including vertical/curved surface fixed with polimer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washersor fiiied with white lead,inchuding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete,excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required(1mm thick with zinc coating not less than 275gm/m^2,DSR.N.12.1.1

Please Enable Macros to View BoQ information