Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹20.1 L+₹99,707 (5.23%)Rejected-Finance | L2 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 39950.00 | |
| 3 | L3₹21.9 L+₹2.8 L (14.7%)Rejected-Finance | L3 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 39950.00 | |
| 4 | L4₹22.2 L+₹3.1 L (16.4%)Rejected-Finance | L4 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 39950.00 | |
| 5 | L5₹23.3 L+₹4.2 L (21.9%)Rejected-Finance | L5 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 39950.00 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH AKHNOOR
GE NORTH AKHNOOR PIN 181201 CO 56 APO
CERTAIN MAINTENANCE REPAIRS TO OTM ACCN POCKET A B AND H UNDER GE NORTH AKHNOOR
2022_MES_533226_1
GE (N)AKH-24/2022-23
Open Tender
Civil Works
Item Rate
180 days
AKHNOOR
Class D cat a i
8 documents required · 8 mandatory
₹500
Yes
GE NORTH AKHNOOR
₹50,000
Yes
14 Sept 2022
23 Jun 2022
29 Jul 2022
23 Jun 2022
27 Jul 2022
7 Jul 2022
Amount
Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer -in-Charge.
Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified and as directed by Engineer -in-Charge
Ditto all as per Srl item No. 2 here-in-before, but except bricks.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed by Engineer -in-Charge.
Rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Rendering 15mm thick in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.
Rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.
Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.
Preparation of old painted surfaces of wall by washing, rubbing down and stopping of distempered and painted walls and applying one coat of oil bound distemper complete all as specified and as directed.
Preparation of old painted surfaces of wall by washing, rubbing down and stopping of plastered surfaces and applying one coat of cement base paint white or tined on wall complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.
40mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring including finishing the top surface even & smooth, without using extra cement complete all as specified and as directed by Engineer-in-charge.
75mm thick PCC (1:3:6) type C-1 using 40mm graded stone aggregate as in plinth protection laid in bays complete including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and as directed by Engineer-in-Charge.
25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate, including finishing surface of concrete topping even and rough as in screed bed complete all as specified.
M & L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer 15 mm thick for laying floor finishes in CM 1:6 complete all as specified.
Ditto all as per Srl item No. 19 here-in- before but in skirting over and including 10 mm thick rendering in CM 1:4.
Glazed ceramic tile 450 x 350 x 7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick cement plaster in CM mortar 1:4 as backing complete all as specified and as directed by Engineer-in-Charge.
M&L for vitrified ceramic coloured tiles (light shade) 10mm thick (Square/reactangular) area of each tiles not exceeding 0.36 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match Screed bed or bedding layer 15 mm thick for laying floor finishes in CM 1:6 complete all as specified.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust , etc all as specified and directed.
M&L for brushing neat cement slurry with 3.0kg of cement per sq. metre all as specified and directed.
20-25 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. (Size of Kota Stone slab shall be 52 cm x 52 cm).
Ditto all as per Srl item No. 25 here-in- before but in skirting/dado incl 10 mm thick CM 1:4 complete.
20 mm thick makrana white marble as in border/cooking platform etc, bedded and jointed in 20mm thick in cement mortar 1:6 including pointing in white cement 1:2 using marble dust including cutting and polishing complete all as specified and as directed by Engineer-in-Charge.
Dismantling AC/CGI/Galvalume corrugated or semi-corrugated sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling timber scanlings (Framed work) 40 Sqcm and over in section, in any position complete all as specified
S&F structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-410-W (Gde-E-250) quality B complete all as specified.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Ditto all as per item No 31 here-in-before but plain sheets
Dismantling of wall and ceiling boards (Fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid framework complete all as specified and directed by Engineer-in-Charge.
Supply and fixing of 4mm thick preliminated designer ceiling board (595x595mm) over GI snap grid frame work (Grid size 600x600mm) with powder coated GI angle of size 25x25x3mm, main runner 'T' of size 25xc40x3mm,secondary runner 'T' of size 25x30x3mm suspended with 3mm GI wire @ 1200mm c/c complete all as specified.
Restraining, resecuring including making good of loose/distrubed GI snap grid ceiling frame work incl carefully taking down ceiling board and refixing in position, complete all as specified and as directed by Engineer-in-Charge
S&F 4mm thick prelaminated designer ceiling board (excluding framework) all as specified and as directed by Engineer-in-Charge
Vitreous China squatting pan “Orissa pattern” size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes etc fixed in repairs, complete all as specified.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and pipe) complete fixed in repair, all as specified and as directed.
PVC low level flushing cistern, valveless, syphonic action type, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 90 cm long etc, supplied and fixed in repairs, complete all as specified and as directed.
Vitreous china Urinal, Half stall type, white ( excluding flushing cistern, flush pipe and waste pipe), with grating and union for discharge pipe fixed in repairs all as specified.
Vitreous china wash basin, white, flat back, size 550x400mm including pillar tap, waste fitting chromium plated brass, chromium plated steel chain and rubber plug, porcelain stopper, a pair of CI brackets, waste pipe and pillar tap etc., fixed in repairs complete all as specified.
PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed in repairs complete all as specified.
S&F in repair stainless steel gratings 100/125mm bore size fixed with cement mortar.
S&F in repair waste pipe for WHB/Urinal for 32/40mm dia all as specified & as directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
-Ditto- all as per item No. 46 here- in- before but 20 mm bore.
15mm bore tubes, medium grade, galvanised with and including all fittings fixed to walls, floors, or ceiling or laid in floors etc complete all as specified.
-Ditto- all as per item No 48 here in before but 20mm bore.
Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge.
-Ditto- all as per item No.50 here- in- before but 20 mm bore.
Stop valves/angle valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, supplied and fixed in repairs complete all as specified.
Bib taps, fancy type chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.
Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, supplied and fixed in repairs, complete all as specified.
S&F in repair health faucet with 1 mtr long easy flexible tube and wall hook chromium plated screwed down for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover including chromium plated hinges device, complete all as specified and directed by Engr-in-Charge.
S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified.
S&F in repair 20mm bore gun metal glove or gate valve with iron wheel head screwed bith end for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing unserviceable tank complete all as specified.
Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing unserviceable tank complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site complete all as specified.
-Ditto- all as per Srl item No.61 here-in-before, but area exceeding 1.5 sqm and not exceeding 4.00 sqm each
Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge
Taking down and refixing incl resecuring and easing shutters area exceeding 1.00 sqm and n.exc 2.00 Sqm each in the same opening complete all as specified and as directed by Engineer-in-Charge.
Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and as directed by Engineer-in-Charge.
All as per item No 65 here-in-before but of size 125 x 60 mm
PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed by Engineer-in-Charge.
PCC 1:3:6 type C-1 using 20mm graded stone aggregate for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed by Engineer-in-Charge.
35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.
35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a) complete all as specified.
Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II, 2004 as specified and directed by Engr-in-Charge.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II, 2004 as specified.
Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.
250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified.
200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed by Engineer-in-Charge.
Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and as directed by Engineer-in-Charge.
Door closer of aluminium (Die cast body), hydraulically regulated, designation No 2, universal type, suitable for door shutters of weight between 36 to 60 Kg, ISI marked, complete all as specified and as directed by Engineer-in-Charge.
300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 25mm dia stainless curtain rod complete with stainless bracket and side caprs fixed in position by drilling holes in wall and fixed the bracket with rawl plug and SS screws all as specified and as directed by Engineer-in-Charge.
S&F Steel windows/ventilator (Box type) factory made glass/glazed shutter, (glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh no 1/1 to 1/3 .
All as per item No 80 here-in-before but without glazing bars.
Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads complete all as specified.
03 mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified.
All as per item No 83 here-in-before but figured (frosted) glass.
Galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
All as per the description of item No.85 here in before but fixed in repair.
Mild steel framed work as in grills, grating etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description exc 10 cm width or girth, priming with red oxide primer and painting with two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified ans as directed by Engineer-in-Charge.
Preparation of old steel surface of any description exc 10 cm width or girth and painting with one coats of synthetic enamel paint complete all as specified and directed by Engineer-in Charge.
Painting to old wood or wood based surfaces of any description, not otherwise described over 10 cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Dismantling PVC pipe of any dia and any description in floor or wall complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors including dismantling of existing old unserviceable pipes etc complete all as specified and directed .
S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on wall including dismantling of existing old unserviceable pipes etc complete all as specified and directed .
S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors including dismantling of existing old unserviceable pipes etc complete all as specified and directed .
S&F in repairs PVC (SWR) bends any radius 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 'T' single (equal or unequal) 110 mm dia with access doors complete all as specified and directed
S&F in repairs PVC (SWR) bends any radius 75mm dia complete all as specified and directed.
S&F in repairs PVC (SWR) 75mm dia floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs PVC (SWR) 'T' single (equal or unequal) 75 mm dia with access doors complete all as specified and directed
Taking down and refixing in position of aluminium door shutter of any size and description and making functional by way of repair/ replacement of floor spring hinges lock, rubber packing etc as required complete all as specified and as directed by Engineer-in-Charge.
S&F powder coated anodised aluminum frame for doors, windows, ventilators with one or more rebates incl joining cleat for fixing etc complete all as specified.
S&F powder coated (thickness of coating not less than 50micron) anodised aluminum door shutters, aluminum section weighing 0.55 kg/m incl necessary joining cleats, glazing clips, 5.5mm thick glass (glass shall be measured and paid seperately), rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified.
M/s Vishwakarma Enterprises
BALVINDER SINGH AND SONS
PACHNANDA BUILDERS
Ankush Gupta
M/S KARAN SINGH CONTRACTOR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .