GENERAL FUND (2024-25)

Amount

Dadooing walls with Glazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (pattern design) 20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour

Supplying and fixing the Wall Panelling with the following specification fixing horizontally and vertically in position of wall. Fixing the water proof ply wood 9mm thick board over the country wood planks. Over the ply wood OST sheet of 4mm thick will be fixed with necessary screws and fevicol giving neat finsih. The top will be finished with two coats of sanding polishing. The surface will be finished with necessary design as directed by the Departmental Officers. The rate inclusive of all materials, labour power and conveyance of materials to the work site, loading & unloading etc., and as per drawing and design by the Departmetnal Officers. The water proof ply wood and OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. (M-0706 P.No.113)

Supplying, fabricating, erecting and fixing Using Hilux Board Plain Sheets (10mm thick)(or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level (P.No.93)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the Old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supplying delivery and Fixing 2TR Spilt Air Conditioner with out Stabilizer Including cost of material s and labour charges etc Complete as per standard specification ( M-2655,P.No.246)

Supplying delivery and Fixing 4KVA Voltage Stabilizer Including cost of material s and labour charges etc Complete as per standard specification ( M-2662,P.No.246)

Supplying and delivery of Teak wood Conference Hall Table Including Cost and Conveyance of all Materials and Labour Charges etc complete in size (9' x 2'6")

Supplying and delivery of Teak wood Table Including Cost and Conveyance of all Materials and Labour Charges etc complete in size (4' x 2')

Supplying and delivery of Table Top Glass 8mm Including Cost and Conveyance of all Materials and Labour Charges etc complete

Supplying and Fixing of Sunmica for Table Including Cost and Conveyance of all materials and labour charges etc complete

Supplying and delivery of WCHR Teak wood Conference Chair with Arm and Cushion Including Cost and Conveyance of Chair etc complete

Supply and delivery of PVC insulated and sheathed 4 of 7/16 sq.mmconfirming to IS 694/1990 including cost and conveyance of material etc complete as per standard specification

Supply and delivery of PVC insulated and sheathed 1.5 sqmm copper wire confirming to IS 694/1990 including cost and conveyance of material etc complete as per standard specification

100A Panel Board incoming 100A TPN Switch with various range of TP/DP/SP MCB with suitable angle iron frame work

100 Amps TPN Switch with HRC Fuses Sheet Steel Double Break Triple pole Switches (Side Handle).

Wiringwith2x1.5sq.mm.(22/0.3) PVC insulated SC unsheathed copper conductorcableof1100Vgradeinsuitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5A FT switch with 3mm thick hylemsheet cover MS switch box with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion for for open PVC light point / fan point (for electronic regulator)

Wiringwith2x1.5sq.mm.(22/0.3) PVC insulated SC unsheathed copper conductorcableof1100Vgradeinsuitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5A FT switch with 3mm thick hylemsheet cover MS switch box with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion for concealed portion with suitable colour for concealed 5A plug point

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box

Supply and fixing of 5A or 10A or 20A AC single phase 230V, 50Hz Watth our metre on suitable TW box complete with earth connections

ANITHA AGENCIES (BID ID -1163375)