DRILLING AND DEVELOPMENT,CONSTRUCTION OF PUMP HOUSE, DTANKS, FENCING OF BARBED WIRE AND ENERGISATION OF 02 NO. DEEP TUBEWELL IN VILLAGE BHAMANMAJRA AND ADHREDA OF ROPAR BLOCK IN RUPNAGAR DISTRICT (UNDER 502NO DEEP T/WELL PROJECT)

Amount

A) Drilling, Development, Over Development of Works etc. 2 no. Tubewells of villages: BHAMANMAJRA AND ADHREDA( Block Ropar)

Drilling of 600mm dia bore with reverse rotary rig in all kinds of soil including the cost of consumable stores,fuel oil and transportation of rig to the site Complete in all respect

(a) From 0 to 150 Meter.

(b) From 150 meter to 275 Meter.

Supplying,lowering of M.S. pipe as per IS :4270:2001 including M.S. socket having dimensions as per IS code duly welded with M.S. electrode to have extra strength to lower pipe into tubewell bore.

(i) 300mm nominal diameter (weight 62.3 kg per metre) 8.00 mm thickness

(ii) 200mm nominal diameter ( weight 41.6 kg per metre) 8.00 mm thickness

Supplying, fixing and lowering of stainless steel cage type wire wound screen as per IS 8110-2000 or latest with ISI Marked duly welded with suitable grade SS welding electrode to lower the strainer into tube well bore 200mm dia Stainless Steel Strainer

Supplying, Fixing and lowering of Stainless Steel Socket as per IS 8110-2000 or latest ISI marked duly welded with suitable grade SS welding electrode. to lower the strainer into tubewell bore. 200 mm internal diameter

Supplying, Lowering & fixing of M.S. Special Socket to connect S.S. Strainer to M.S. Pipe duly welded with suitable grade welding electrode complete in all respect. 200 mm internal diameter

Supplying and fixing of bail plug of MS pipe complete with invertor U-Block attached to the bottom plug complete in all respect. 200mm internal diameter (weight 41.6 kg per metre )8.00mm thick.

Providing and fixing M.S. Taper/Reducer made out of 8mm thick sheet complete in all respect. M.S. Reducer 300 x 200mm dia.

Supplying and fixing Mild Steel Centering guides madeout of 32mm X 6mm thick M.S. bar complete in all respect. Center guide

Supplying and fixing of well cap having thread to fix on housing pipe complete in all respect. Top well cap 300mm dia.

Supplying and fixing of M.S. Clamp of size 150mm X 12mm made out of MS flat 1.52m long, suitable to fit housing pipe including the cost of nut and bolt of suitable size complete in all respect. M.S. Clamp 300mm dia.

Supplying at site wooden box of suitable size with lid and locking arrangement for preserving strata sample collected from the bore.

Making temporary water supply arrangement for drilling of tubewell with reverse rotary rig till completion of bore and packing of gravel. Depth of temporary bore upto 90 mtr

Supply at quarry site of gravel of 1/16” to 1/8” including pouring and packing in the annular space between the pipes assembly and the bore. The gravel should be free from , dust , dirt, or the vegetable manner as per IS :4097/1967 with latest amendments (to be paid as per actual length of pipe). For proper approved size from nearest quarry to site of work.

Resistivity Survey

Making electric logging of bore hole with electronic well logger including cost of equipment at site etc. complete in all respect.

DEVELOPMENT AND OVER DEVELOPMENT CHARGES.

(a) Development and stabilizing of the t/well with Air Compressor of required capacity as directed by engineer-in charge including cost of tools, appliances and consumable to the satisfaction of engineer-in-charge. Capacity of air compressor 250 - 350 PSI 1100-1500cfm

(b) Development and stabilizing of the tubewell with submersible pump of required capacity as directed by the Engineer- in – charge including the cost of tools , appliances and consumable to the satisfaction of engineer-in-charge.

B. Construction of Pump House, D-Tank, fencing of pump house area with barbed wire as per approved drawings and PWD specifications

Const of Pump House Size 10’ x 8’ and 11’ht. with 9” thick wall with 1:7 brick masonary cement sand mortar, RB slab 1:3,6” thick with brick plumbing, cement plaster 1:6, 12.5mm thick on walls, cement plaster 1:4, 12.5mm thickness on ceiling, cement pointing 1:3 deep variety out side the pump house, as per approved drawing.

Construction of D-Tank Construction of D-Tank as per approved drawing with brick masonary 1:5 in cement sand mortar in foundation and above plinth level, with cement plaster 1:3, 12.5mm thickness on walls in side, cement plaster 1:4, 12.5mm thick outside D-tank.

Const. of barbed wire Const. of barbed wire fencing around the pump house and D-Tank as per approved drawing

D. Supplying, Fixing & Installation of Pumping set and Control Panel & Lowering Material etc.

Submersible pumping set of 55 H.P. ISI Marked

Three Core Submersible Flat Cable 16 sqmm. ISI Marked

Control panel complete 55 H.P.

MS pipe(heavy) (IS:1239/3589/4270), 100 mm i/d 5.40 mm thick.

Suppling and Fixing M.S. flange 4 “ dia , 5/8” thick , outer dia. 190 mm with 4 no. holes and 2 no. cuts

M.S. nut & bolt of all sorts

M.S. Lead clamp of 100 mm dia size 3mmx20mm

PVC Rubber Jain with 4 holes 3mm thick and 2 no. cuts

M.S flat for jal

PVC insulator core cable for connection from transformer to Control Panel

Supplying and fixing of well cap to fix on housing pipe complete in all respect -300 mm internal diameter

M.S. bend 4”,90 degree , 5 mm thickness, leg length 40 cm ,flange thickness 15 mm , 6 no. holes

Providing & fixing C.I/D.I flanged end , stem of SS (AIS 1410) & Bronze ( gunmetal) working parts sluice valves ISI maked 14846-2000 , including jointing, Testing & cost of Nut, bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge) .Class PN-1 as per ISI 100 mm i/d Sluice Valves flanged.

PVC copper wire 19/16 ISI marked

PVC copper wire 7/22 ISI marked

T/well provision soldier thimble, flexible pipe , copper earth plate, G.I. pipe 1" dia, G.I. wire, internal electrification & Double earthing (with cost of material & labour)

Labour for lowering of pumping set

Any other item as per CSR+ZP

BIRDEVINDER SINGH GILL CONTRACTOR