CWE/FZR- /2022-23 Provn of augmentation to external water supply at Kasubegu Under GE (East) Ferozepur Cantt

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for laying of cable foundations of poles/stays etc. and getting out in soft/loose soil complete all as specified and directed .

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

Returning, filling in, earth including spreading, leveling watering and well ramming in layer each not exceeding 25cm thick, complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Taking up cast iron water mains (including all fittings),with spigot and socket ends and lead joints from trenches of 150 mm dia complete all as specified.

Taking up cast iron water mains (including all fittings),with spigot and socket ends and lead joints from trenches of 100 mm dia complete all as specified and directed.

M&L for Taking up or down steel tubing and connections of dia 50 mm including cleaning for refixing or removal to store complete all as specified and directed.

M&L for Taking up or down steel tubing and connections of dia 25 mm including cleaning for refixing or removal to store complete all as specified and directed.

Taking out old U/S sluice valve/Non return valve any type of size 150/100 mm complete all as specified and directed.

Supplying , laying , jointing and testing in trenches 150 mm bore centrifugally cast ductile Iron pipe class K7 conforming to IS 8329-2000 including testing complete all as specified, Note:- (i) Excavation ,Earth Work and DI Fittimgs shall be measured and Paid for separately under respective items. (ii) Cost of rubber tyton joints is included in the rate quoted. (iii) Standard lenght of the pipe should be 5.50 metre or 6.00 metre as available. (iv) The measurement of the pipe shall be net as fixed between the fittings including short length without any allowance for cutting and wastage and for the portion entering in the socket of all pipes and fittings. (v) Predespatch inspection & testing of DI pipe shall be carried out by the representative of AO. All the expense for the same shall be borne by the contractor and the quoted rates shall be deemed to be included for the same.

All as per Item No-11 here-in-before but class "K-7" and 100 mm bore.

Supply and fixing and testing ductile iron fittings such as bends (any type radius and angle) Tapers any type (straight,bend,increasing,decreasing or double socket etc) Tee pieces single branch "Y" junction. Double branch,cross (all sockets or socket and spigot) collars,tail pieces with one end flanged (integrally cast) and one end socket. Spigot caps and plugs suitable for 100 to 150 mm bore ductile iron pressure pipes of K-7 classification and push on flexible rubber gasket joints complete all as specified. (i) DI fittings shall be of same make as of DI pipes or of make as recommended by manufacturers. (ii) The weight of the fittings shall be measured and paid as given in relevent IS or actually provided which ever is less. (iii) All fittings shall bear relevent IS stamping marking. (vi) Excavation and earth work shall be measured and paid for separately. (v) Cost of the joints and jointing materials shall be deeemed to be included in the relvant items of DI pipes here-in-before.

Supply and laying & testing galvanised mild steel tubing medium grade 50mm bore with all fittings,laid in trenches,in floor/under road on wall complete all as specified.

All as per item no 14 here-in- before but 25 mm bore.

Supply, Fixing and Fabrication of header made out of MS pipe 300 mm dia 9.50 mm thick and not less than 4.5 metre long and welded on both sides with MS plate in and including provision of flanges of size 150 mm Dia - 01 Nos and outgoing flanges size of 150mm dia -02 Nos, 100 mm dia -02 Nos and 80 mm dia -02 Nos and fixing to sluice valves 150mm dia - 03 No( one incoming & two Outgoing), sluice valves100mm dia -02( Outgoing) Nos sluice valves 80 mm -01(Outgoing) and length of Inlet 150 mm dia and outlet 150/100/80 mm dia DI pipe line not less than 0.6 mtr fix with distibution mains of DI/CI pipe line. Header should be embedded on PCC block B1 1:2:4 using 20 mm graded stone aggregate of size 2.0M x 0.5M x 1.0M all as directed. Note :- (i) The fiitings ,Sluice valves required at site shall be measured and paid for separetely. (ii) Cost of PCC block shall be deemed to be included in the unit rate).

Supply, Fixing and Fabrication of header made out of MS pipe 300 mm dia 9.50 mm thick and not less than 3.0 metre long and welded on both sides with MS plate in and including provision of flanges of size 150 mm dia -01 Nos and outgoing flanges size of 150mm dia -01 Nos, 100 mm dia -02 Nos and 80 mm Dia -01 Nos and fixing to sluice valves 150mm dia - 02 No( one incoming & one Outgoing), sluice valves100mm dia -02 Nos ( Outgoing) sluice valves 80 mm -01( outgoing) and length of Inlet 150 mm dia and outlet 150/100/80 mm dia DI pipe line not less than 0.6 mtr fix with distibution mains of DI/CI pipe line. Header should be embedded on PCC block 1:2:4 using 20 mm graded stone aggregate of size 2.0M x 0.5M x 1.0M all as directed. Note :- (i) The fiitings ,Sluice valves required at site shall be measured and paid for separetely. (ii) Cost of PCC block shall be deemed to be included in the unit rate).

Supply and fixing cast iron sluice valve long body ISI marked both end flanged Class PN 1.0 for 150mm bore pipe with brass spindle IS-14846-2000 complete with hand wheel joints,jointing material,rubber insertion sheet 3 mm thick,bolt,nuts,washers etc including excavation and earth work complete all as specified.

All as per Item No-18 here-in-before but 100 mm bore.

All as per Item No-18 here-in-before but 80 mm bore.

Supply and fix Gun metal globe or gate valves (ISI marked), with iron wheel head ,screwed both ends for iron pipe or for unions for 50 mm dia bore pipe complete all as specified

All as per Item No-21 here-in-before but 25 mm bore dia

M&L Flex Sign board made out of high quality sheet having Sign board made out of Suitable size of MS Sheet having display the details of pump house as required at site, the size of sign board not less than 1.5 metre x 1 metre fitted on angle of size 50x50x6mm and aluminium sheet of thickness not less than 2mm with 1x40W LED tube light fitting inside incl tube rod and internal cable connections all as required at site fixed on wall/gate or to be grouted in PCC 1:2:4 type B-1 using 20mm graded stone aggregate above 1.2 metre from ground level on ground with suitable nut & bolt as directed by Engr in charge.

M&L for redevelopment of tube well by means of pumping by Air compressor of minimum pressure 10 Kg/cm2 (compressor to be arranged by contractor at his cost), until sand free and clean water is obtained at the optimum yield complete all as specified and directed including water tested from any govt recognised lab. Note :- (i) The cost of transportation of compressor is deemed to be included in the item rate.

Supply, Fixing as in replacement of Non Return Valve of size 150mm dia CI Pipe Complete all as specified and directed.

Supply, installation,commissioning and testing of submersible pump set Multistage (As per mfg design stage) electric driven 2900 RPM of capacity not less than 780 LPM at not less than 90 mtr head water lubricated suitable for 200/250mm bore and 150 mm dia discharge pipe coupled with squirrel cage induction electric motor 3 phase 415 volts of capacity not less than 30 HP having CI casing & Gun Metal impeller fitted with delivery pipe etc as reqd at site, complete all as specified

M&L for Run lead joint for CI spigot and socket pipes & fittings 150 mm bore with new lead complete all as specified and directed.

All as per Item No 28 here in before but for Bore of pipe 100 mm.

M & L for structural steel/MS flat and bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 95 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

CHETAK CONSTRUCTION COMPANY

JAWAHAR CONSTRUCTION COMPANY

KAILASH CONSTRUCTION COMPANY

ABHISHEK AND COMPANY

S.R. Kaura and Company