REPAIR TO SUNKEN, FLOOR TRAP, PLASTER, CLEANING / REPAIR OF SEWAGE LINE, MANHOLE, SEPTIC TANKS, SOAKAGE WALL AND CONNECTED REPAIRS UNDER GE (AF) SRINAGAR

Amount

Demolition of PCC of any description from sunken portion of toilet at first floor & above exc 15 cm thickness complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:3) on sunken portion of toilet including mixing only liquid water proofing compound as per manufacturers instruction, finished the surface even and smooth without using extra cement complete. Note:- Liquid water proofing compound will be measured & paid separately.

Supply only Liquid water proofing compound

M&L for preparation of new plastered surface of sunken portion of toilet and applying evenly one coat of cold bitumen emulsion @ 1.2 Kg per square meter complete all as specified and directed.

M&L PCC 1:5:10, type E-2, using 40 mm graded brick aggregate, for filling in sunken portion of toilet complete all as specified and directed.

S&F 40 mm dia Tubes, 'medium grade' galvanised, cut to size and fixed to sunken portion of toilet as spout pipe.

M&L for PCC 1:2:4, type B0, using 20 mm graded stone aggregate, as in roof kerbs or mud stops, rounded or chamfered on edges

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge

Resecuring or easing & adjusting old wooden shutters of any description area exc. 1 Sqm and not exc. 2 Sqm each without taking down shutters, complete all as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.

M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc incl removal of rubbish out of defence land complete all as specified and as directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.

All as per item No 15 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 14 above shall be reused.

M&L for Brick work with sub class 'B" (using old size bricks) straight or curved of on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

Taking down cement plaster of any description on brick or stone masonary wall , etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces, finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturers instruction complete all as specified. Note:- Liquid water proofing compound will be measured & paid separately.

M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete wall surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L for applying 3 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surafce even & smooth for reciving distemper / paint of any descreption all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid seperatly

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified.

M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified.

M&L for 10 mm thick rendring / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in leveling layer for floor complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surfaces of size 600 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for non skid ceramic coloured tiles of size 600 mm x 600 mm 8 to 10 mm thick as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc laid over existing screed bed, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm for skirting / dado etc laid over existing backing coat, set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Demolition of RCC selves / cooking plateform (reinforement cut as required to facilitate demolition) and similar suspended work and removing debries form site all as specified and directed.

M&L for RCC 1:2:4 using, type B0, using 12.5 mm graded stone aggregate as in selves / cooking plateform and similar work complete all as specified & directed.

Use & waste form work to soffits & side of selves / cooking plateform flat, fair finished surfaces of concrete not exceeding 100 mm thick complete all as specified & directed.

S&F Mild steel TMT bars 8 to 10 mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns, hooling ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including half round molding of exposed edge complete all as specified.

S&F in repair Stainless steel plate rack made of 0.8 mm thick sheet, including fixing to wall with PVC gutties and screws of suitable sizes, overall size 600 x 750 having partitions, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste assembly, complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 15 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 46 above).

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

Refixing old steel tubing and connections in new or old position on walls, ceiling or floors etc of size 20 mm bore after cleaning including provn of new fittings all as directed by Engineer-in-Charge (using old steel tubing retrived from item No 47 above).

S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified.

M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

S&F in repairs, 100 mm dia stainles steel chromium plated grating, fixed in position with white cement Complete.

S & F in repairs 15 mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm size wall mixer with L bend for shower for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repair ABS plastic chromium plated Health faucet fixed with spring action and lever along with Flexible hose with brass nut of length 1 m to 1.2 m fitted in the existing water connection in the toilets, Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size two way angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size two way bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size long body bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repair PVC connection 15 mm size, of length 600 mm, with PTMT nuts complete all as specified and as directed by Engineer-in-Charge

S&F in repair Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats.

S & F in repair Corner Glass Shelf of size 300 mm with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats.

S&F in repair brass chromium plated shower roses with swil joints, 80 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete.

S&F in repair PVC low level flushing cistern, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete complete all as specified.

Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc complete.

S&F in reapir Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium plated brass screws, complete all as specified and as direted by the Engr-in-Charge

S&F in repairs Stainless Steel Soap dish, fixed to plugs with chromium plated brass screws Complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete

S&F in repairs 20 mm size Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F Magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-In-Charge.

S&F Piano type hinges of brass with 30 mm flap width complete all as specified and directed by Engineer-In-Charge.

S&F in repair 20 mm Dia Curtain rail, stainless steel chromium plated, fixed with bracket and end caps etc including taking down of existing curtain rail, complete all as specified and directed.

S&F 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished

S & F 100 mm size hasp and staple, stainless steel including bolt to hinge plate and fixed with screws in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 18 / 19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in Kitchen drawers etc. including 4 mm thick teak wood lipping on edges complete.

S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete.

S&F Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded. Sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing.

M&L for Pressed steel frames 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

M&L for Pressed steel frames 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar, thickness of sheet 1.25 mm and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified.

S&F 35 mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S&F 35 mm thick, 2 nd class hard wood, glazed & skeleton factory made shutters, open rebated and prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair IInd class hard-wood, small fittings such as bracket of any sizes, hinge blocks, cleats, door / window stoppers and like articles not exceeding 200 cubic centimetres each complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new wooden surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge.

S&F 100 mm size butt hinges, Stainless Steel complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete .

S&F 150 mm size, aluminium anodized handles, cast type complete all as specified and directed by Engineer-In-Charge.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repair Floor door stopper of aluminium alloy body, double legged with rubber shoe fixed to door, Overall length of cover plate 100 mm all as specified and directed by Engineer-in-Charge

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay, & hold fast, and glazing bars, dovetailed or welded complete.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, steel peg stay, & hold fast, and without glazing bars, dovetailed or welded complete.

S&F fixed type Steel windows / ventilator including hold fast, and with glazing bars, dovetailed or welded complete.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of red oxide primer.

S&F 3 mm thick sheet glass, ordinary quality and glazing with wooden beads in square or rectangular in section n exc 0.5 sq.m in each pane fixed with beads complete .

S&F 4 mm thick sheet glass, figured glass, pin head type and glazing with oil putty / wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples

S&F in repair 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F in repair door strip comprising of aluminium holds & rubber strip fixed at bottom of door shutter with screws complete all as specified and as directed by Engineer-in-Charge

M&L for Lagging to pipes 15 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete including taking down of old lagging all as specified and directed by Engineer-in-Charge

S&F in repair 20 mm size Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and as directed by Engineer-in-Charge.

Taking down PVC (SWR) pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, all as specified.

S&F 75 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp complete all as specified and as directed by the Engineer-in-Charge.

S&F 110 mm outer dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with clamp complete all as specified and as directed by the Engineer-in-Charge.

S&F 75 mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 110 mm size PVC (SWR) bends of any radius, complete all as specified.

S&F 110 mm size PVC bore (SWR) branch piece, single (single Y) equal or unequal, complete all as specified

S&F in repair CI Access door cover for 75 mm bore pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge.

S&F in repair CI Access door cover for 100 mm bore pipe incl all asseseries complete all as specified and directed by Engineer-in-Charge.

Dismantling MS works of any discription complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm using excavated soil complete all as specified.

Removing excavated soil to a distance n.exc 50 m and depositing at a level not exceeding 1.50m above the starting point all as directed at site.

Demolition of Precast cast RCC manhole cover of any descreption set in Cement mortar including removal of debries, complete all as specified and directed.

Demolition and breaking up 150 mm dia bore salt glazed stone were drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC bedding and removal of debries all specified and directed.

Demolition and breaking up 200 mm dia bore salt glazed stone were drain pipe including PCC packing under hunching against the sides of pipe bed and complete PCC bedding and removal of debries all specified and directed.

S&F 150 mm bore, HDPE Double Wall Corrugated Pipe in any length with rubber ring joints, laid in trenches for sewage pipe complete all as specified and as directed by the Engineer-in-Charge.

M&L for Salt-glazed stoneware drain pipe, grade ‘A’ internal dia of pipe 150 mm, laid in trenches and jointed with cement & sand mortar, complete all as specified & directed.

S&F 200 mm bore, HDPE Double Wall Corrugated Pipe in any length with rubber ring joints, laid in trenches for sewage pipe complete all as specified and as directed by the Engineer-in-Charge.

M&L for Salt-glazed stoneware drain pipe, grade ‘A’ internal dia of pipe 200 mm, laid in trenches and jointed with cement & sand mortar, complete all as specified & directed.

M&L for Concrete bed to 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate and tested, complete all as specified & directed.

M&L for Concrete bed to 200 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:3:6 (Nominal mix) type C-2 using 40mm graded stone aggregate and tested, complete all as specified & directed.

M&L for cutting & removing 150 / 200 mm dia drain pipe from existing manhole and inserting new drain pipe of dia 150 / 200 mm, making good disturbed surface & benching with cement concrete 1:2:4 type B-1, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-2, using 40 mm graded crushed stone aggregate as in surface channel and drains including necessary form work, complete all as specified and directed by Engineer-in-Charge.

M&L for Extra over item No 137 above for forming fair finished to drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc., complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching / coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:4 complete, complete all as specified and directed by Engineer-in-Charge. Note:- Reinforcement steel will be measured & paid separately

Cleaning of 100 mm bore underground sewage pipe (Cleaning length n.exc 30 m from manhole to manhole or from manhole to septic tank) including taking off manhole cover and cleaning of manholes of any size and depth and removing waste material / sludge to a distance of n.exc 300 m and burrying in a pit and replacing manhole cover in position after cleaning complete all as specified and directed by Engineer-in-Charge

All as per item No 142 above but 150 mm bore sewage line, complete all as specified and directed by Engineer-in-Charge.

All as per item No 142 above but 200 mm bore sewage line, complete all as specified and directed by Engineer-in-Charge.

Cleaning of blockage WC of pedestal / squatt pattern upto 1st manhole and making the drian pipe of any size full functional by flushing with water to entire satisfaction of engr in charge including cleaning of 1st manhole and removing the waste material / sludge etc to a distance n. exec 300m and burying the same in pits and spreading the area with bleaching powder complete all as specified and directed by engr in charge.

Cleaning of blockage from floor trap of bath room & kitchen etc upto 1st manhole including cleaning of gully / trap and removing the waste material / sludge etc to a distance n. exec 300 m and burying the same in pits and spreading the area with bleaching powder complete all as specified and directed by engr in charge.

Dewatering of soakage well of any depth in any position by pumping out and removing outside Military/Defence land by mechanical means (trolley mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after absorption of water and including providing and spreading required quantity of bleaching powder around the pit or dispose of waste material as per state protocol including taking down of slab cover and refixing the same CM 1:4 complete all as specified and directed by engineer-in-charge.

De-sludging of septic tank of any capacity including connected intercepting chamber, manhole shaft, sludge chamber & filter beds of any description and in any position by pumping out and removing of sludge outside Military/ Defence land by mechanical means (trolly mounted) and burying in pits all as directed including digging of pits in any type of soil and covering pits with earth after filling of sludge and including providing and spearding required qty of bleaching powder or dispose of waste material complete as per state protocol, including taking down of slab cover and placing the same in existing postion complete all as specified and directed by Engineer-in-Charge.

Note for Item No 124 to 148:- (a) Cost of excavation and earth work for pits for burrying the waste / sludge etc shall deemed to be included in the unit rate. (b) Any damage caused during cleaning shall be made good to entire satisfaction of Engineer-in-Charge without any extra cost. (c) All types of equipments and safety kit required for working in foul condition shall be provided by the contractor to his workmen. The Engineer-in-Charge shall verify these aspects during currency of work. Al precautions / safety measures shall be kept in mind during execution of work. (d) Contractor will deploy at least 01 seawge cleaning person and 01 supervisor during the day hours. Supervisor will take complaint slip of sewage block daily from concerned JE for attending day to day complaints. Contractor's quoted rates shall be deemed to include for the same and nothing extra shall be paid on this account.

M/S Abdul Ahad Rather

M/S LUCKY BUILDERS

M/S WANI AND SONS