REPAIR/MAINTENANCE OF PUMP SETS AND CONNECTED EXTERNAL WATER SUPPLY SERVICES WORKS AT AFS BHISIANA

Amount

Supply and fix MS ERW pipe flanged joint & Joint nominal dia 300 mm as per IS 3589 (1981) thickness 6.0 mm , including special joints complete for delivery and side including necessary nuts bolts and rubber etc, complete including earthwork all as specified and directed by Engineer in chargee. Note : The quoted units rate shall be inclusive for making header for connection of varios sizes of from Inlet & out let from the 40 HP Pump Existing pump CI/DI pipe line for delivery/Suction including welding , bending work & nut bolts require to fix of pipe.

Supply and fix MS ERW pipe flanged end & Joint nominal dia 150 mm as per IS 3589 (1981) thickness 6.0 mm , including special joints complete for delivery and side including necessary nuts bolts and rubber etc, including earthwork complete all as specified and directed by Engineer in chargee. Note : The cost shall beinclusive for making header for connection of varios sizes of DI/GI pipe line for delivery including welding ,nut Bolts , require to fix of pipe bending work.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 300 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size all as specified and as directed by Eng-in-chargee.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 200 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body Non Return Butter Fly valve PN 1.6 conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 150 mm all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 150 mm all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 200 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 200 mm all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 250 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 250 mm all as specified and as directed by Eng-in-charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 300 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 300 mm all as specified and as directed by Eng-in-charge.

Taking out unserviceable and supply and fix new Foot valve suitable for 150 mm dia bore pipe complete all as specified and directed by Engr-in-charge.

Supply and fixing in repairs water pressure gauge tamper proof and water proof 0 to 14 kg/cm2 with control valve 15 mm dia brass material. Note. The cost shall be included 15 mm dia 30 cm long GI pipe and making holes in existing new pipe for fixing of pressure gauge

Material and labour for PCC 1:3:6, type C-1, using 20mm graded stone aggregate under pipe line as anchor blocks at the places where required and fair finishing to exposed surfaces without using extra cement including necessary form work complete all as specified.for making foundation of water storage tanks after dismantling old foundation.

Supply and fix CI fittings flanged end up to 300 mm dia bore such as Bends (any type radious and angle ) tapers any type , (straight, bends increasing, decreasing or double socket etc) Tee places single branch , 'Y' junction , double branch , cross (all sockets or socket and spigot ) collars caps and plugs, mechanical joints suitable for 150 /80/100 mm pipe. Note The quoted unit rate shall be included for nut,bolt any size and length require to fix , joint of MS pipe and joint , elbow , Tee, , Bend , Flanged ro existing pipe suction and delivery

Taking out U/S CI fittings bend (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket) etc Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size upto 150mm/100mm /80mm complete all as specified and directed.

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radious built in cement mortar 1:4 using sub class b bricks as in wall / pillars etc complete all as specified and as directed after demolition of old brick work.

Material and labour for construction of valve pit chambers of size 1.5m X 1.50mX 1mtr (internal dimensions) as under provided with 10 cm thick PCC 1:4:8 type D2 as in foundation over 15 cm thick hard core, 23 cm thick brick walls built in cement mortar 1:4, 15 mm thick internal plaster including top of floor, externally upto 150 mm below GL in CM 1:3 finish even and smooth without using extra cement, 4 mm thick MS sheet cover with 40 x 40 x 6 mm MS angle frame fixed in PCC 1:2:4 type B1 coping with 25 x 6 mm flat iron hold fasts, hinges, handles, locking arrangements and applying 2 coats of synthetic enamel paint over a coat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including excavation and earth work in any type of soil and removing of surplus soil to a distance not exceeding 50 m complete all as specified and directed after demolition of old Valve pit completely.

Taking down U/s & Material and labour new electric control panel (CPRI approved) for pumping sets, cubical type, for in door type use, floor mounted, factory a fobricated, dust, weather & vermin proof, powder coated, made out of CRCA sheet of 3 mm thick and angle iron legs of size 50 mm x 50mm x 5mm with front openable with locking arrangements, shutters for each MCCB/starters having hinges on one side and locating knobs press type on other side and rear openable door complete with fully enclosed bus bar chamber, having insulated bus bar made out of aluminium strips of rating 650 amps for 3 phase & nutral 415 volts, 50 C/S 4 wire system, with cable entry provision complete all as specified and including suitable pcc work as recommended by manufacturer equipped with the following items:- Note : The cost of PCC foundation shall be deemed to be included in this item rate.(New pump house stand by)

Taking out /down old unserviceable DI pipe of 300 mm dia including all fittings etc from trenches including earth work complete all as specified and directed. Note : Earth work will not be paid extra.

Taking out /down old unserviceable DI pipe of 150 mm dia including all fittings etc from trenches complete all as specified and directed.

Taking out U/S & M&L for run lead joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking out U/S & M&L for run lead joints for 250mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking out U/S & M&L for run lead joints for 200mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking out U/S & M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking out U/S & M&L for run lead joints for 100mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking out U/S & M&L for run lead joints for 80mm dia spigot and socketed CI pipe fittings including spun yarn etc.

Taking down electric motor 40 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing both side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball bearing of above motor bearing No -NBC 6309 with providing of high grade grease

Taking down electric motor 25 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball U/S ball / roller bearing of above motor bearing No -NBC 6307 with providing of high grade grease complete all as specified and directed.

Taking down electric motor 10 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed.

Taking down electric motor 7.5 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed.

Taking down electric motor 05 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed.

Taking down electric motor 01 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing both side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed.

M&L for opening pump from Sewage under ground sump 09 mtr depth or any pump house using lifting crane or suitable equipment to lift the pump from 09 mtr depth or pump house set split case centrifugal type coupled to electric motor of capacity 40 HP, make Kirloskar / Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc at workshop including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works etc all as specified and as directed by Engr-in-charge.

Supply only spare parts for pump set for fixing against item No 40 .as follows:-

a) Supply only pump shaft sleeve, collar, made out of gun metal

b) Supply only key for main shaft/impeller

c) Supply only check nut for pump set shaft

d) Supply only stuffing box bush

e) Supply only motor pump coupling complete with nut, bolts etc

f) Supply only water seal

g)Supply only stuffing box packing

h) Supply only rubber tyre coupling complete make Fenner/Unique/Unimac NO TC-16/TC-14

i) Supply only pump set bearing housing .

j) Supply only pump Shaft

k) Supply ball/roller bearing complete

l) Supply only Air relase valve

m) Supply only Impeller

Note:All the items/parts mentioned against Item No 41 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No 40 above. Cost of fixing of items is deemed to be included in the unit rate quoted by the bidder against item No. 40 above

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 25 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc at workshop including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works etc all as specified and as directed by Engr-in-charge. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Supply only spare parts for 25HP pump set for replacing vide item No. as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

g)Rubber coupling as per sample suitable for 25 HP Centrifugal pump complete all as specified and directed by Engr-in-charge Make : MRF or equivalent

Note:All the items/parts mentioned against 43 shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 42. Cost of fixing of the all items is deemed to be in included in the unit rate quoted by the bidder against Srl item No 42 here-in-before

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 10 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc at workshop including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works etc all as specified and as directed by Engr-in-charge. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Supply only spare parts for 10 HP pump set for replacing vide item No. above as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

Note:All the items/parts mentioned against 45(a) to 45(f) shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 44 and as directed by Engr-in-charge.

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 7.5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc at workshop including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified and as directed by Engr-in-charge. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Supply only spare parts for 7.5 HP pump set for replacing vide item above as follows:-

(a) Supply only pump shaft sleeve made out of gun metal

(b) Supply only key for main shaft

Supply only check nut

Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

Note:All the items/parts mentioned against Item No 47 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No 46 above. Cost of fixing of items is deemed to be included in the unit rate quoted by the bidder against item No. 46 above

M&L for opening pump set split case monoblock /Submersible pump type coupled to electric motor of capacity 5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc at workshop including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works all as specified and as directed by Engr-in-charge.

Supply only spare parts for 05 HP pump set for replacing vide item above as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

Note:All the items/parts mentioned against Item No 49 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No 48 above. Cost of fixing of items is deemed to be included in the unit rate quoted by the bidder against item No. 48 above

Dismantling Submersible pump set 10 HP 3 phase 415 V from borewll along with colum pipe using lifting crane or suitbale equipmment to lift out submersible pump from borewell and after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc at workshop for repair/overhauling including replacing the unserviceable parts and jointing of new submersible canle given in schdeule with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified and as directed by Engr-in-charge. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Supply only spare parts for pump set of capacity 10 HPvide item above as follows:-

a) Supply only key for main shaft

b) Supply only check nut

c) Supply only impeller any matrial

d) Supply only water seal

e) Supply only submersible bearing complete

Note:All the items/parts mentioned against Item No 51 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No 50 above. Cost of fixing of items is deemed to be included in the unit rate quoted by the bidder against item No. 50 above

M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and earth lead, suction and delivery pipes, from 09 mtre depth of sewage well or pump house or any location directed by JE E/M shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and Rotar cleaning the stator slots and core assembly, rewinding to stator and rotar with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: - Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

All as per Item No 52 for Pump set of capacity up to 5 HP

All as per Item No 52 for Pump set of capacity up to 7.5 HP

All as per Item No 52 for Pump set of capacity up to 10 HP

All as per Item No 52 for Pump set of capacity up to 20 HP

All as per Item No 52 for Pump set of capacity up to 40 HP

Dismantling booster pump 0.5 to 1 hp 3/1 phase 415/250 V from foundation base plate after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling and warnishing and baking the stator winding to enhance the insulation level including replacing the unserviceable parts with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified. and as directed by Engr-in-charge. Note :- Replacement of roller/ball bearing if required after opening of Motor will be paid separately under respective item.

Supply only spare parts for pump set of capacity 0.5 to 1 HPvide item No. 18 as follows:-

Pressure tank suitbale for 1 hp 24 ltr capacity

Pressure switch suitable for 1 hp

Float switch

Y Type strainer

Pressure gauge

SS flexible pipe

NRV 25 mm

5 way connector

Hex nipple

SS Impeller

SS Impeller Note: All the items/parts mentioned against Item No 59 here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No 58 Cost of fixing of items shall deemed to be included in the quoted unit rate against item No 58 here-in-before

Material and labour for repairs to Single phase 240 Volt squirrel cage induction motor of capacity 0.5 HP fitted on chlorination plant existing make and model by removing from the foundation and rewinding the motor, over hauling the pump by replacing the bearings etc complete including two coats of painting with yellow synthetic enamel paint and refixing complete in all respect all as specified and directed.

Taking down U/s & Supply and installation , testing , commissioning of chlorine / chlorine DI-oxide solution dosing pump capable for 0-20 lph, 0.37 kw for maintang free chlorine @7.0 ppm for desinfection complete with suction and discharge pipe , self priming foot valve , adapter , Pump make SEKO or equivalent including all accessories such as electrical/ control connection complete.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve, with iron wheel head, screwed both ends, suitable for 100 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve , with iron wheel head, screwed both ends, suitable for 40mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve , with iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve, with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve , with iron wheel head, screwed both ends, suitable for 15 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-charge.

Taking out unserviceable and supply and fix new Foot valve suitable for 100 mm dia bore pipe complete all as specified and directed by Engr-in-charge.

Earthing complete with GI earth plates electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salts to a packet thickness of 15 cm all around the plate,using GI earth strip 25x4 mm connected to earth plate by means of nut ,bolts and washers as directed GI pipe light grade 50mm bore on water pipe from earth chamber to copper edge of earth plate,CI funnel with wiremesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pitcover 50mm thick pre-cost RCC 1:2:4 type B-1 dully rainforced with MS bars 6mm dia @150 cc both ways with 10mm dia MS bar handle excavation earth work including laying of GI pipe in walls etcall as directed in electrical plate No 3 of SSR pt I complete all as specified and directed after taking out the old unserviceable earthing.

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 185 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified after taking out old cable.

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified after taking out old cable.

Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified after taking out old cable.

Taking out U/S & Supply and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified ater taking out old cable.

M&L Sand (Fazilka) Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, punned thickness of Sand Cushioning only will be Measured.

Supply & Laying old bricks to provide brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10 mm complete all as specified and directed.

Taking out U/S & S&F DOL stater suitable for 5HP to7.5HP electric motors including necessary electric connections complete all as directed Make C&S Model No BE!SPSSDX204321-B /L&T/ Havells

Taking out U/S & S&F Star-Delta stater suitable for 10HP electric motors including necessary electric connections complete all as directed Make :C&S Model No BE3SPSSDX404355A-4 L&T/Havells

Taking out U/S & M&L for repairs to unserviceable star delta starter for pump set 40HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets.

Taking out U/S & M&L for repairs to unserviceable star delta starter for pump set 20HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets.

Taking out U/S & M&L for repairs to unserviceable star delta starter for pump set 10HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets.

M&L for Servicing, cleaning, checking the entire electrical control wiring of the LT system colour coding the same , replacing the same , replecing the U/S wire(any size) , lugs, thimble, Indicator lamps (RYB), including nuts, bolts and making inter locking system functional,cleaning with pump & CRC testing complete and making good the defects complete all as specified and directed.

Taking out U/S & Supply & fix 3 pole contractors type MNX -95, Rating 160 amps, 415 volts and coil voltage - 220 volts. Make:- L&T/ C&S /HPL

Taking out U/S & Supply & fix 3 pole contractors type MNX -70, Rating 63 amps, 415 volts and coil voltage - 220 volts. Make :- L&T/ C&S /HPL

Taking out U/S & Supply & fix 3 pole contractors type MNX -45, Rating 40 amps, 415 volts and coil voltage - 220 volts. Make :- L&T/ C&S /HPL

Taking out U/S & S&F in replacement 3 pole Contactor 40A , 415 VAC, 50 Hz as per IS 60947-4-1complete as per existing Make & Type.

Taking out U/S & S&F in replacement Single Phase Preventor (VSP 3), 415 VAC, 50 Hz complete as per existing make Complete Make- Minilec.

Taking out U/S & S&F in replacement Thermal over load relay 9- 32 A, 415 V, 50 Hz as per existing Make & Type.

Taking out U/S & S&F in replacement of Electronic timer Star-Delta of 3S-120 Second as complete.

Taking out U/S & S&F for replacement of Pump motor coupling fully suitable for 20 HP pump with rubber bushes, complete all as directed by Engineer in chargee.

Taking out U/S & S&F Amp Meter 0-200 Amps digital type capacity square type, complete all as directed by Engineer in chargee.

Taking out U/S & S&F Voltmeter 0-500 volt digital type in cluding requred wiring capacity square type, complete all as directed by Engineer in chargee.

Taking out U/S & S&F CT's ratio 100/5, complete all as directed by Engineer in chargee.

Taking out U/S & S&F CT's ratio 200/5, complete all as directed by Engineer in chargee.

Taking out U/S & M&L for gland flange suitable for 5 to 40HP monoblock pump set incl replacement of gland packing all as directed

Taking out U/S & M&L for rubber insertion packing suitable for 200mm CI foot valve / suction pipe flanged incl replacement of U/S nut and bolts, complete all as directed by Engineer in chargee.

M&L for painting of suction and delivery pipe not more than 5 mtrs and motor pump set of capacity upto 40 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.

M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity upto 10-20 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed.

M&L for stopping leakege of GI Pipe by replacing any type of fittings (bend, tee, elbow, reducer, end plug, taper, union, nipple, socket etc) all as directed by Engr-in-charge (Earth work shall deemed to be included in quoted rate)

All as per Item No 100 for GI pipe of Dia 100/150 mm.

All as per Item No 100 for GI pipe of Dia 80 mm.

All as per Item No 100 for GI pipe of Dia 50 mm.

All as per Item No 100 for GI pipe of Dia 40/32 mm.

All as per Item No 100 for GI pipe of Dia 25 mm.

All as per Item No 100 for GI pipe of Dia 15 mm.

Taking out U/S & S&F MCCBs 63 Amps,4pole having rupturing capacity 16KA,415 volts including termination point for connection complete all as directed by Engr-in-charge

Taking out U/S & S&F MCCBs 125 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as directed by Engr-in-charge

Taking out U/S & S&F MCCBs 400 Amps,4pole having rupturing capacity 36KA,415 volts including termination point for connection complete all as directed by Engr-in-charge

M&L for replacement of on-load Change Over of capacity 400A, 4 Pole 415 volts with suitable ms sheet enclosure as recommended by OEM , suitable for wall mounted including termination point for connection complete all as specified and directed. Note the cost shall be included for fixing of existing size 400 sqmm 3 .5 core lt cable with lugs & thimbles made of copper matrial incoming and out going, all as directed by Engr-in-charge

Taking out U/S & S&F Supply and install LED aviation light comprising of aluminium housing with polycarbonate enclusure cat pt no 110731 Make Bajaj / CG / Wipro led all as specified and directed by Engr-in-charge

Taking down U/S & Supply and fixing in replacement of butterfly valve of size 150mm dia as per exiting sample/ size complete all as directed by Engr-in-charge.

Taking down U/S & Supply and fixing in replacement of butterfly valve of size 200 mm dia as per exiting sample/ size complete all as directed by Engr-in-charge.

Taking down U/S & Supply , fixing , testing commissioning of motor actuated valve of size 150 mm dia complete single phase motor actuated with gear box valve set with disc material of CI with nylon coating, hand wheel for manual operation, pressure rating of 10 kg/sq cm and having 02 nos limit switches for open / closed condition and capability of accepting 4-20mA input complete set Make-Ritetork/Astech/Emtork

Taking Down US & Supply , fixing , testing commissioning of motor actuated valve of size 200 mm dia complete single phase motor actuated with gear box valve set with disc material of CI with nylon coating, hand wheel for manual operation, pressure rating of 10 kg/sq cm and having 02 nos limit switches for open / closed condition and capability of accepting 4-20mA input complete set Make-Ritetork/Astech/Emtork complete all as directed by Engr-in-charge.

Supply and fixing in replacement of rust proof, maintenance free magnetic float switch / water level sensor as per exiting sample/ size of Make :RDS/ATS or equivalent complete all as directed by Engr-in-charge.

Takinng down U/S & Supply and fixing 2 x 1.5 sq mm PVC sheathed and PVC armoured Copper cable etc as required, complete all as directed by Engr-in-charge.

Takinng down U/S & Supply and fixing 6 x 1.5 sq mm PVC sheathed and PVC armoured Copper cable etc as required, complete all as directed by Engr-in-charge.

Supply and fixing in replacement of 5 pair of 0.5 mm dia armoured copper cable suitable for sensoring with suitable size of PVC conduit pipe as per exiting sample/ size duly fixed on wall of over head tank of complete all as directed by Engr-in-charge.

Supply and Fixing of Motorized Butterfly Valve Encloser for MOV size of 150 MM, complete all as directed by Engr-in-charge.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying pipe line, complete all as specified and as directed by Engineer-in-chargee.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of surplus excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc. 1.5 above the starting point complete all as directed by Engineer in chargee.

Taking down u/s and Supply and fix MS nuts bolts of required size or sample availbale at MES Office of glands cover & sluice valves complete all as directed by Engineer in chargee.

Taking down u/s and Supply and fix rubber sheet size 3 mm thick complete all as directed by Engineer in chargee.

Taking down U/S and S&F gland packing in to the pump and sluice valve of any capcity and size all as specified and as directed.

Supply and replace NRV TIKKI 150 mm & 100 mm dia suitable for CI body NRV/Foot valve including nut boltd washer rate included for removing and refixing in to the pipe in sump /pump house

M&L for repair to valve pit of size 90x90x90 cm and replacement of valve pit cover with MS cover and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 x 40 x 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enmel paint over a coat of red oxide primer on MS cover and frame.

Repairs to gate and replacement of spindle suitable for 150mm sluice valve complete all as specified and directed by Engr-in-charge.

Repairs to gate and replacement of spindle suitable for 100mm sluice valve complete all as specified and directed by Engr-in-charge.

Taking out the existing pump and motor from the base plate of capacity 60 HP including disconnecting the existing electrical connection, suction and delivery line including earth work and breaking the existing PCC foundation and Making new new RCC foundation , base plate , iron angles frame , nut bolts washer for holding to pump with motor for fixing the 60 HP Pump set pipe line foundation as per manufacture design, and refixing the pump set including necessery electrical connection and water connection testing complete. (new pump house) as existing and as directed by Eng-In-chargee.

Note No 01:- The contractor should attend the complaint and rectify the defect within 48 Hours (Maximum) failing which RS @500 per day per complaint of for individual items shall be recovered from the RAR/Final bill.

Note No 02 : The quoted rates shall be included for 01 Pump mechanic and 01 Electrician for attending daily complaints . The Contractor shall arrange 01 Pump mechanic and 01 Electrician for attending of complaint day to day on daily basis, they will be report to AGE E/M office on every day at 0800hrs to 1600hrs. Non Attendance of complaint by the contractor's Representative will be intimated to GE office on the same day to make recovery and to avoid any litigation later on. If absent on attending of complaint @1000 recovey will be penalty per day and recovey will be made on RAR/Final bills. The contractor will produced attendance register duly signed by AGE E/M, and JE E/M on process of RAR. Without these document payment will not made to the contractor

Note No 03: The Engineer -in- charge shall intimate the scope of work as per BOQ to be executed on daily basis in writing through Works Site Order Book as under condition 44 of IAFW 2249 to contractor's labour for execution of work. The contractor's representative will give completion reposrt of the work executed on the same day at 1600 hrs duly signed by the users. All these documents shall be attached along with RAR for payment to the contractor. No Works beyond scope of this contract shall be intimated to contractor.

Note No 04 :All above mentioned items will be executed in different location/ pump house/ E/M installation and every meter of pipe/ pipe fittings will be executed on daily complaint basis in different location / bldg or as directed by Engr-in-charge. The contractor could not ask at only one or two site for execution of all CA quantities , they will be bound to attend complaint as per user requirement or directed by Eng-In-chargee

SWARN SINGH AND CO.

R K GOYAL & COMPANY

POOJA CONSTRUCTION COMPANY

Aman Enterprises