park for person with specia...

Specially Abled People Arm andTai Chi Wheel Fitness Apparatus Providing and fixing the following outdoor fitness equipment’s designed for minimum 100 kg user Weight confirming to the required standard for safety and quality as per DIN/ASTM /CPSC/European standard / BIS The equipment shall be confirming to the specification as below:- a) All the equipment shall be Third Party Quality certified as per the specified standard. b)Nuts and Bolts- Stainless steel 316 and lock-nut c)Material – Galvanized steel Pipe cleaned by stand-blasting then coated with phosphate solution and finished with electro-static powder coating or other similar available material meeting the required standard d)Anti-rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface e)Column the mild steel pipe column footing plate screw with a pull-burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household- level spraying layer, electrostatic spray, high-temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification f)Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti- static de-colorization element passing, strength, smooth surface, Security assurance weather resistant etc. g)UV-fully resistant Platforms- High strength punching plate with special process dealing with wavy surface microscopy, safe and beautiful non-slip resistance Fasteners – stainless steel screw to be used and at the contact point with the columns- rubbers pads to be used , screw top cover with a plastic cap, to enhance its security The installation of the equipment’s shall be carried out on cement concrete foundation of minimum size 700 mm x 700mm x 700 mm and / or size approved by Engineer-in- charge of mix 1:1:5:3(1 cement 1.5 coarse sand 3 graded stone aggregate of 20 mm nominal size ) The cost for equipment shall include the required foundation bolts of 18 mm dia and of required shape and length as per sample approved by Engineer-in-charge however the cost for earth work and CC shall be paid for separately .The rates Quoted for the put door fitness specifications:-. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.

Specially Abled People Arm extension Fitness Apparatus Providing and fixing the following outdoor fitness equipment’s designed for minimum 100 kg user Weight confirming to the required standard for safety and quality as per DIN/ASTM /CPSC/European standard / BIS The equipment shall be confirming to the specification as below:- All the equipment shall be Third Party Quality certified as per the specified standard. Nuts and Bolts- Stainless steel 316 and lock-nut Material – Galvanized steel Pipe cleaned by stand-blasting then coated with phosphate solution and finished with electro-static powder coating or other similar available material meeting the required standard Anti-rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface Column the mild steel pipe column footing plate screw with a pull-burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household- level spraying layer, electrostatic spray, high-temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti-static de-colorization element passing, strength, smooth surface, Security assurance weather resistant etc. g) UV-fully resistant Platforms- High strength punching plate with special process dealing with wavy surface microscopy, safe and beautiful non-slip resistance Fasteners – stainless steel screw to be used and at the contact point with the columns- rubbers pads to be used , screw top cover with a plastic cap, to enhance its security The installation of the equipment’s shall be carried out on cement concrete foundation of minimum size 700 mm x 700mm x 700 mm and / or size approved by Engineer-in-charge of mix 1:1:5:3(1 cement 1.5 coarse sand 3 graded stone aggregate of 20 mm nominal size ) The cost for equipment shall include the required foundation bolts of 18 mm dia and of required shape and length as per sample approved by Engineer-in-charge however the cost for earth work and CC shall be paid for separately .The rates Quoted for the put door fitness equipment’s shall be inclusive of 1st Year comprehensive maintenance specifications:-. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.

Specially Abled People Rope Exerciser Fitness Apparatus 1. Material: Heavy-duty, UV-resistant nylon or polyester rope with galvanized steel frame for durability and weather resistance. 2. Dimensions: Frame height ~1.5m, rope length adjustable up to 2m, with ergonomic grip ends for secure handling. 3. Accessibility: Mounted at accessible height with options for seated or wheelchair use: includes stabilizing handrails. 4. Resistance: Includes adjustable tension mechanisms (e.g., weighted pulleys or elastic bands) for customizable resistance. 5. Safety Features: Smooth rope movement, anti-fray ends, non-slip base, and ADAcompliant clear usage instructions. 6. All the equipment shall be Third Party Quality certified as per the specified standard. 7. Nuts and Bolts- Stainless steel 316 and lock-nut 8. Material – Galvanized steel Pipe cleaned by stand-blasting then coated with phosphate solution and finished with electro-static powder coating or other similar available material meeting the required standard 9. Anti-rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface 10. Column the mild steel pipe column footing plate screw with a pull-burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household- level spraying layer, electrostatic spray, high-temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification 11. Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti-static de-colorization element passing, strength, smooth surface, Security assurance weather resistant etc. 12. UV-fully resistant specifications:-. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.

Providing and fixing the following outdoor fitness equipment’s designed for minimum 100 kg user Weight confirming to the required standard for safety and quality as per DIN/ASTM /CPSC/European standard / BIS The equipment shall be confirming to the specification as below: - a) All the equipment shall be Third Party Quality certified as per the specified standard. b) Nuts and Bolts - Stainless steel 316 and lock -nut c) Material – Galvanized steel Pipe cleaned by stand -blasting then coated with phosphate solution and finished with electro -static powder coating or other similar available material meeting the required standard d) Anti -rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface e) Column the mild steel pipe column footing plate screw with a pull -burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household - level spraying layer, electrostatic spray, high -temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification f) Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti - static de -colorization element passing, strength, smooth surface, Security assurance weather resistant etc. g) UV -fully resistant Platforms - High strength punching plate with special process dealing with wavy surface microscopy, safe and beautiful non -slip resistance Fasteners – stainless steel screw to be used and at the contact point with the columns - rubbers pads to be used , screw top cover with a plastic cap, to enhance its security The installation of the equipment’s shall be carried out on cement concrete foundation of minimum size 700 mm x 700mm x 700 mm and / or size approved by Engineer -in -charge of mix 1:1:5:3(1 cement 1.5 coarse sand 3 graded stone aggregate of 20 mm nominal size ) The cost for equipment shall include the required foundation bolts of 18 mm dia and of required shape and length as per sample approved by Engineer -in -charge however the cost for earth work and CC shall be paid for separately .The rates Quoted for the put door fitness equipment’s shall be inclusive of 1st Year comprehensive maintenance specifications: -. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80 -120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.

Providing and fixing the following outdoor fitness equipment’s designed for minimum 100 kg user Weight confirming to the required standard for safety and quality as per DIN/ASTM /CPSC/European standard / BIS The equipment shall be confirming to the specification as below: - a) All the equipment shall be Third Party Quality certified as per the specified standard. b) Nuts and Bolts - Stainless steel 316 and lock -nut c) Material – Galvanized steel Pipe cleaned by stand -blasting then coated with phosphate solution and finished with electro -static powder coating or other similar available material meeting the required standard d) Anti -rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface e) Column the mild steel pipe column footing plate screw with a pull -burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household - level spraying layer, electrostatic spray, high -temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification f) Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti - static de -colorization element passing, strength, smooth surface, Security assurance weather resistant etc. g) UV -fully resistant Platforms - High strength punching plate with special process dealing with wavy surface microscopy, safe and beautiful non -slip resistance Fasteners – stainless steel screw to be used and at the contact point with the columns - rubbers pads to be used , screw top cover with a plastic cap, to enhance its security The installation of the equipment’s shall be carried out on cement concrete foundation of minimum size 700 mm x 700mm x 700 mm and / or size approved by Engineer -in -charge of mix 1:1:5:3(1 cement 1.5 coarse sand 3 graded stone aggregate of 20 mm nominal size ) The cost for equipment shall include the required foundation bolts of 18 mm dia and of required shape and length as per sample approved by Engineer -in -charge however the cost for earth work and CC shall be paid for separately .The rates Quoted for the put door fitness equipment’s shall be inclusive of 1st Year comprehensive maintenance specifications: -. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle support frame of NB 50mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80 -120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) ‘C’ Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self -lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M -25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

park for person with special abilities situated MC Campus in Ambedkar Park Nagnal Choudhary Complete in all respect

Please Enable Macros to View BoQ information