CERTAIN REPAIRS TO OTM AND MD ACCN AT RMS CHAIL UNDER GE (I) JUTOGH

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position (unframed work), complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

Demolition of brick masonry/ stone masonry built in cement mortar including all quious, pillars arches etc., complete all as specified and directed.

S&F second class hard-wood, timber fixed and clean sawn, in scantlings, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with creosote complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified plain, galvanised, complete all as specified and as directed

M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber 8 mm suitably placed in false ceiling grid made of anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm and hangers 6 mm dia. GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Taking down chowkats or frames without taking down shutters, not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames without taking down shutters exc. 1.5 sqm but n.exc. 4 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each, complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each, complete all as specified and directed.

S&F flush shutters, solid core construction, with particle board core and plywood face panels,30 mm thick commercial type on both side, complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F for butt hinge ISI Marked 75mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F 200mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed, complete all as specified and directed.

S&F 150mm long mild steel barrel tower bolts, stove enameled black, with bright bolt and fixed, complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 150 mm mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F 125 mm mild steel pressed handles, oval type, stove enameled black complete all as specified and directed.

S&F 300mm brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

M&L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface w/o using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in cement plaster 1:6 on rough faces of brick work or concrete surfaces/stone work incl finishing surface without using extra cement, complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F glazed ceramic coloured tiles of size 300x450x7mm/ 250x350x7mm thick as in dados, skirting, wall etc set jointed and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for parking designer tiles 12 mm thick (square/ rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer complete all as specified and directed. Note: Colour and shade as approved by GE.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded & pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 CM width or girth including preparation of surfaces, complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying 2 coats of OBD over a coat of 3 mm thick wall care putty as on walls, complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying 2 coats of cement base paint, complete all as specified and directed.

S&F in repair Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed Chromium plated 15 mm bore complete all as specified and directed.

S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but but fancy type, chromium plated 15 mm bore complete all as specified and directed.

M&L for 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors incl taking up & down steel water tubing complete all as specified and directed.

S&F in repair 15mm fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed .

Dismantling water tanks and removing to store exc 500 ltrs but n exc 1000 ltrs complete all as specified and directed.

S&F 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F in repair ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20mm iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) etc complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends of brackets or erecting stand incl pillar tap CP 15 mm bore complete all as specified and directed.

S&F in repair 10 litrs capacity PVC low level valve less symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and flushing pipe etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe290 Gde-E-165, complete all as specified and directed.

R. P. Suppliers and Construction Co. (BID ID -3361432)

M/S PARMOD KUMAR (BID ID -3369915)

M/S J.S.ENTERPRISES (BID ID -3361496)