138WE/L-110/2025-26

Amount

Demolition of cement concrete (unreinforced ) in ground floor and pavings not exc 15cm thick below or above ground level complete all as specified and/or as directed by the Engr-in-Charge.

Demolition of precast concrete block walling built in cement mortar complete all as specified and/or as directed by the Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and/or as directed by the Engr-in-Charge.

M&L for preparation of new plastered wall surface of any description and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and/or as directed by the Engr-in-Charge.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each complete all as specified and/or as directed by the Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and/or as directed by the Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and/or as directed by the Engr-in-Charge.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern, complete all as specified and/or as directed by the Engr-in-Charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and/or as directed by the Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in roof covering /cladding to walls fixed with self tapping screws complete all as specified and/or as directed by the Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/or as directed by the Engr-in-Charge.

Preparation of newly or previously untreated steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantling the exising boards including cover fillets complete all as specified and/or as directed by the Engr-in-Charge.

All as per serial item No 14 above, but as in ceiling.

M&L for 2nd class soft wood clean sawn as in plain fillets for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beading for edges of ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section, complete all as specified and/or as directed by the Engr-in-Charge.

M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and/or as directed by the Engr-in-Charge.

M & L glazed (coloured) ceramic tiles of size (350 x250mm) x 7 mm / 450mm x 350mm x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles all as specified and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and/or as directed by the Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc. laid bedded and pointed in any mortar.

M&L for Cement concrete 1:4:8, type D-2, (40mm graded aggregate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for chequered cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments and laid over 20mm thick cement screed base (1:6) complete all as specified and/or as directed by the Engr-in-Charge.

M&L 75mm thick for PCC 1:3:6 type C-1 as in plinth protection finished even and smooth without using extra cement, complete all as specified and/or as directed by the Engr-in-Charge.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for precast solid block masonry casted in cement concrete type C-1 (1:3:6) using 20mm graded crushed stone aggregate set in CM 1:6 complete all as specified and/or as directed by the Engr-in-Charge.

S&F for 30 mm thick 2nd class soft wood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supply and fixed to chowkhats, complete all as specified and/or as directed by the Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and/or as directed by the Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (3 Nos) suitable handle (1 No) etc. complete all as specified and/or as directed by the Engr-in-Charge.

M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and/or as directed by the Engr-in-Charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and/or as directed by the Engr-in-Charge.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and/or as directed by the Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and/or as directed by the Engr-in-Charge.

S&F floor door stopper (Length of cover plate ) 150mm long aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and/or as directed by the Engr-in-Charge.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and/or as directed by the Engr-in-Charge.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and/or as directed by the Engr-in-Charge.

S &F Rotational moulded polyethylene puff water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 litres including all accessories, including dismantling of water tanks and remove to store, complete all as specified and/or as directed by the Engr-in-Charge.

S&F in repairs 25mm bore stop cock chromium plated screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule, complete all as specified and/or as directed by the Engr-in-Charge.

S&F in repairs 25mm ball brass valves, high pressure with polythene float and fly nut complete screwed for iron/PPR pipe, complete all as specified and/or as directed by the Engr-in-Charge.

S & F in repairs fancy type 15mm bore chromium plated bib taps, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and/or as directed by the Engr-in-Charge.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified.

S&F 25 mm bore 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fitting fixed complete to walls, ceiling or floors, complete all as specified and/or as directed by the Engr-in-Charge.

All as per serial item No. 41 above, but of size 32 mm bore pipe.

S & F in repair sink with drain board made of Stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and/or as directed by the Engr-in-Charge.

S & F in repair Vitreous China wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete all as specified and/or as directed by the Engr-in-Charge.

S&F in repairs, 15 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and/or as directed by the Engr-in-Charge.

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC flexible Waste pipe for sinks / wash hand basins, complete all as specified and/or as directed by the Engr-in-Charge.

S & F in repairs, 32mm waste coupling of PTMT for sink and wash hand basin (Half or full threaded ) (Minimum Weight 45 grams), complete all as specified and/or as directed by the Engr-in-Charge.

S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs complete all as specified and/or as directed by the Engr-in-Charge.

S & F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and direced.

S&F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges.

Taking down carefully copper/ aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as specified and directed by Engr-in-Charge.

Taking down carefully sub main wiring/service wire of any description complete all as specified and directed.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

One light/exhaust fan point controlled by one way switch complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on same board complete all as specified and directed.

One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed.

All as item No 55 above, but using cables 4 Sq mm size for independent power point.

Supply and fix in replacement of lamp holder insulated body with back plate complete all as specified and directed.

Supply and fix of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed.

Supply and fix of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts complete all as directed.

Supply and fix of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts complete all as directed.

Supply and fix of Ceiling rose, surface Bakelite three terminals complete all as directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways complete all as specified and directed.

Supply and fix of MCB SPN 63 Amp 240 Volts AC ISI marked complete all as specified and directed.

Supply and fix of MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and directed.

M & L for submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping wire size 2 x 6.0 sq. mm + 1x 6.0 sq. mm earth wire complete all as specified and directed.

Supply and fix in replacement LED light fitting 1x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in replacement, connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp with impact and corrosion resistant incl thermal management in multiple optics including bracket and fixing arrangements with IP 65/66 protection complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60 cm × 60 cm.× 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I , 2009 and connected to earthing test point all as specified and indicated including testing on completion. Note The charcoal, common Salt and any other items required for getting the value are included in this rate .

Supply, lay and testing cable XLPE in replacement Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core complete all as specified and directed.

M&L for excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for laying UG cable in trenches not exc 10 Sqm on plan and n exc 1.5 m in depth in any type of soil and getting out all as specified and directed .

M&L for Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25 cm, complete all as specified and directed.

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed.

M&L for Sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-2 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed

M/S BALI CONSTRUCTIONS (BID ID -3362919)

M/s B R Constructions (BID ID -3362929)