SPECIAL REPAIR TO BLDG NO P-20 (OR MD ACCN) IN ZONE-II, T-10 (OR PERS LINE) AND T-9/10C (TOILET/BATHROOM) AT LEKHAPANI MIL STN UNDER GE LEKHAPANI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Dismantling water tanks and removing from site of capacity exceeding 250 liters and not exceeding 500 litres including fixing the same tank on same position after completion of WPT complete all as specified & as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc.1.50sq.m each complete all as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc.1.50sq.m and n.exc 4 sqm each complete all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 sqm each.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for 15mm bore pipes complete all as specified and directed.

Taking down timber roof trusses, coupled rafters or trussed beams of clear span above 4 mtrs and upto 8 mtrs for renewal of any defective members (timber renewed to be measured separately) and reassembling complete all as specified and as directed

Dismantling timber fillets, rails, posts, rafters, purlins, etc in unframed work under 40 Sqcm in section in any posotion complete all as specified & directed.

Dismantling water tanks exc 500ltr but not exceeding 1000ltr capacity complete all as specified and as directed

Dismantling timber scantlings 40 Sq.cm and over in section as in unframed work, in any position complete all as specified & directed.

Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling timber boarding, any description, fixed in any position with nails complete all as specified & directed.

Dismantling wall and celling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified & directed

Dismantling of Asbestos cement corrugated. semi-corrugated sheets in roof covering complete all as specified & directed.

Demolition of reinforced cement contrete of any description & in any position not otherwise specifically provided for complete all as specified & directed.

Dismantling plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or Similar pattern roof coverings complete and keeping serviceable sheets in safe custody for reuse in the work complete all as specified & directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified & directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as directed.

M&L Reinforced cement concrete TypeA0 1:1.5:3 (12.5 mm graded CRUSHED aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L cement concrete( type B-1) 1:2:4 (20mm graded crushed aggregate) 40 mm thick as in floors, finished rough to receive tilling complete all as specified and directed

M&L for plain cement concrete (1:2:4) Type B-1 (using 20mm graded crushed stone aggregate) as in hold fast block etc including necessary form work complete all as specified and adirected.

Taking down cement plaster on brick or stone walls, etc including raking out joits, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 75 mm thick Cement concrete( type C2) 1:3:6 (using 40 mm graded crushed stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic filing in proportion of bitumen and sand 1:2 complete as specified & directed.

S&F, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws as specified and directed.

All as per item No 24 here-in-before but except sheeting any thickness.

S&F plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L type or J type or crancked hook and washer complete all as specified and as directed.

Material & Labour for 100mm thick plain cement concrete (1:4:8), type D-2, (using 40mm graded crushed stone aggregates) as in sub base of floor complete all as specified and as directed.

M&L for 2nd class hard wood scantling, clean swan, timber fixed as in unframed work complete all as specified and as directed.

M&L 2nd class hard wood as in plain fillets square, clean sawn exc. 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed.

M&L for second class hardwood, scantlings, clean sawn, timber fixed in framed work as in trusses etc. complete as specified and directed.

All as per item No 30 here-in-before but except Timber

S&F 2nd class hard wood plain, solid, straight, chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints.

S&F, Second class hard wood, Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, cross sectional area exc 3 and n.exc 6 Sqcm complete as required and as specified and directed

S & F, 35mm thick, (factory made) second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24(a); complete fixed to frame all as specified & as directed.

S & F, 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified & directed.

S & F, second class hard wood for small fittings such as brackets of any type latch and hinge blocks, shaped door and window stops and like, including all necessary labours, articles n exc 200 cu cm each complete all as specified and directed.

M&L 35mm thick 2nd class hard wood factory made plain framed paneled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified & directed.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surface 350x250x7 /450x350x7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:4) complete all as specified & directed.

M&L for Chequred cement concrete tiles 20cmx20cmx25mm thick, with grey cement and pigments, set, jointed and pointed in grey cement slurry and pigments in floors laid over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed

M&L for coloured non skid joint free ceramic tiles of 7mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.

M&L for non-skid ceramic coloured tiles 7 to 8mm thick (sqare/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified & as directed.

S&F, 4 mm thick, Non asbestos fibre cement building boards fixed to timber/GI/Aluminium framework with screws as in ceiling complete as specified and directed.

M&L for providing minimum 3mm thick, APP based polymeric membrane miniumum weight not less than 3kg per sqm reinforced with polyster nonwoven fabric of weight not less than 150 gms or sqm laid on primed surfaces and applied by torch application method with side lap 75mm and end lap 150mm minimum including cleaning the surfaces with brooms/cotton clothes and priming with bitumious primer @ 0.4kg per Sqm and 10mm thick CM (1:3) plaster/screed including using water proofing compound as per manufacturer`s instruction and finally carrying out water test against leakage and seepages by poding method for 72 hours complete all as specified and directed. Make : APP membrane / STP (super thermolay or equivalent of texsa or IWL) primer STP (bitumastic or equivalent or texsa or IWL). Note: WPC shall be measured and paid separately as supply only.

S&F, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheets, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, etc. fixed with self tapping screws complete all as specified & directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirelly hooping for columns hooking ends & binding with and inlcuding mild steel wire (ennealed) not less than 0.9mm dia or secring with clips complete all as specified & as directed.

M&L for 20mm thick, Granite of any type work(table rubbed and polished)as in platforms for mounting of oval type of wash hand basin etc. in cement motrar 1;4 including pointing in coloured cement to match the colour of granite using marble dust with admixture of pigment complete all as specified and dorected.

M & L preparing newly surfaces of ceiling and applying three coats of white wash complete as specified and directed.

M&L brickwork with old size sub class B bricks straight or curved on plan exc 6 M mean radius half brick wall built in Cement Mortar 1:4 all as specified.

S&F sinks made of stainless steel 1 mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160mm, including waste pipe complete all as specified and as directed.

M&L for providing PCC 1:2:4, type B1 (using 20mm graded stone aggregates) as in roof , sunken portion etc complete all as specified and directed.

M&L for providing 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregaes) as in sub base all as specified and directed.

S&F, in repair vitreous china wash down water closet, "Orissa pattern" size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and traps ‘P’ or ‘S’ complete fixed in repairs all as specified & directed.

S&F in repair PVC valve less, syphonic action type, 10 litres discharge capacity flushing cistern, low level, white,with inlet, ball valve, float and handle including suitable brackets and flush pipe of polythene of low or high density or PVC,32mm dia complete all as specified & as directed.

M&L for brick work with sub class old size 'B' bricks, straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S&F fixed in repair, Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, chain and plug and porcelain stopper but including brackets and waste pipe.

S&F waste coupling of PTMT, 32mm dia of pipe for wash basin as in all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified & as directed.Make-Prayag.

S&F, towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min weitht 190gms) fixed in repair complete all as specified & directed.

Supply & Fixing mild Steel work in tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed.

M & L for rendering 15mm thick in two layers (10mm+5mm) rendering in cement mortar 1:4 on other than fair faces of brick work using waterproofing compound as per manufacturers instructions in top layer and finishing surface even and smooth without using extra cement complete all as specified & directed. (Note : Water proofing compound shall be measured and paid separately as supply only).

M&L for 10mm thick rendering in Cement Mortar (1:6) on fair faces of brick work or concrete surfaces including finishing surfaces even and smooth without using extra cementcomplete all as specified & as directed.

S&F 15mm bore galvanised steel (GI) tubing, medium grade, with all fittings and fixed to walls and ceiling or laid in floors including taking down complete all as specified & directed.

Supply only Integral waterproofing compound complete all as specified & directed.

S&F 20mm bore galvanised steel (GI) tubing, medium grade, with all fittings and fixed to walls and ceiling or laid in floors including taking down complete all as specified & directed.

S&F Galvanised steel wire netting 0.91 mm dia and 12 mm size of mesh for lathing , fixed with tinned tacks of wire staples to wooden frame in wall including all laps, cutting and waste complete all as specified and directed.

Refixing 15mm bore old steel tubing with new fittings and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe including taking down.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Refixing 20mm bore old steel tubing with new fittings and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe including taking down.

M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion including 3mm thick wall care putty complete all as specified & directed.

M&L for preparation of old treated wood and wood based materials, of any description and girth, not otherwise described, and treated with one coat of creosote oil complete all as specified & directed.

S&F in repair Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs bib taps suitable for 15mm bore of pipe, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & as directed.

S&F, pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified & as directed

S&F in repair Stop valves suitable for 15mm bore of pipe, cast coper alloy,screwed down,high pressure,with round handle knob chromium plated, fancy type, screwed both ends to iron pipe or for unions and fixed all as & directed.

S & F aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat and grills for fixing etc. complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified & as directed.

S & F Anodised aluminium windw and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

S&F PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints fixed to walls including taking down old unserviceable pipes complete all as specified and directed.

S&F PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints fixed to walls including taking down old unserviceable pipes complete all as specified and directed.

S&F PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints laid in trench or floor including taking down old unserviceable pipes complete all as specified and directed.

S&F PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints laid in trench or floor including taking down old unserviceable pipes complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F, Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.

S&F PVC (SWR) branch piece single (single "Y")equal or unequai, fitted with access door any radius for 110mm bore pipe complete all as specified and directed.

S&F, Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.

S&F PVC (SWR) bends, fitted with access door any radius for 110mm bore pipe complete all as specified and directed.

S&F, 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5sq. m in each pane complete all as specified and as directed

M&L for 75mm dia of outlet PVC SWR floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F, aluminium alloy wire cloth, 0.45 mm nominal dia of wire & average width of aperture 1.40mm & fixed with alu inium wire staples

S&F Tubular towel rail 20mm dia with brackets of aluminium anodised complete all as specified & directed.

S&F in repair Soap dish, vitreous China white, approximate size 160x 160x90mm

S&F, 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified & as directed.

S&F, mild steel 300mm size, ordinary rat tail rod pattern springs, including roller and roller plate complete fixed to wooden shutter all as specified and as directed.

S&F, 125mm size aluminium handles, cast type, anodized and fixed complete all as specified & as directed.

S&F, mesh size 4mm dia plain mild steel wire, galvanised class 3, in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. as directed (each line of wire to be measured) complete fixed in repairs all as specified & directed.

S&F Aluminum powder coated (powder coated of required clour) three track sliding windows frame top & sides of size 92 x 31.75 x1.50mm (section No 20831) , bottom of size 92 x 31.75 x1.50mm (section No 20832) and shutter top & bottom of size 40 x 18 x 1.55 mm (section No 20736) and side (handle) of size 40 x 18 x 1.55 mm (section No 20738) and lock side shutter frame of size 40 x 18 x 1.45 mm (section No 20737) ” with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36 mm nominal dia of wire with 1.40 mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth not otherwise described and treating small articles such as holdfasts with tar or coal tar black paint area not exceeding 0.1Sqm each complete all as specified and as directed.

Supply and fix Aluminium ventilator, louveres type, frame top & bottom of size 31 x 42 x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (Section 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x 17.30 x0.90mm (section No 19360) thick including stain-less steel wire cloth 0.36 mm nominal dia of wire and 1.40 mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc, all as specified

S&F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge.

S&F 100mm long extruded aluminium alloy butt hinges type C-21 with galvanised mild steel hinge pin anodised and fixed to PVC door complete all as specified and directed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 20 mm dia complete all as specified and directed.

S&F 200 mm size Aluminium anodized barrel tower bolts of extruded section complete.

S & F, 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodized complete.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

M&L for prepairing of newly or previously untreated wood and wooden based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer.

S&F MS hold fast and other small articles made out of mild steel flat iron complete all as specified & as directed.

Cutting holes in brick masonary walls builts in cement mortar for inserting hold fasts, depth of embeded portion of hold fast exc 10cm and n exc 20cm and making good in CM 1:3 including finishing to wall complete to match with the adjoining existing surface.

S&F, 40 mm bore High density ployethylene (HDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete all as specified & directed.

S&F PVC ( LDPE) waste pipe of pressure rating 6kg/cm2 of 32mm dia pipes complete all as specified.

M&L for 5mm thick CM (1:3) plaster as on ceiling including finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

S&F, vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe and to flushing pipe antisyphonage pipe etc with plastic water closet seat, black closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repair all as specified & directed.

S&F, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete fixed in repair all as specified & directed.

M&L for complete removal of existing treatment on old plastered surfaces of walls and preparing surfaces as directed by applying thin layer of wall care putty of 3mm thick and finally applying two coats of distemper oil emulsion over putty complete all as specified and directed.

S&F in repair, PVC (SWR) bends 110mm bore complete all as specified & directed.

M&L for preparation of old painted plastered surfaces of walls etc by washing, rubbing down and applying two coat of cement base paint complete all as specified & directed.

S&F in repair, PVC (SWR) bends 75mm bore complete all as specified & directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified & directed.

S&F in repair, PVC (SWR)junction single (single T) equal or unequal 75mm bore complete all as specified & directed.

M&L for preparation of old painted surfaces of wood of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

S&F in repair, PVC (SWR)junction single (single T) equal or unequal 110mm bore complete all as specified & directed.

M&L for preparation of old painted surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.

S&F in repair, 18/19 mm thick, Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & directed.

S&F, anodised aluminium alloy curtain harrison rails including brackes and fixing brackets , stops, rollers etc complete all as specified and directed.

S&F 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F, Rotational moulded polyethylene water storage tanks of (ISI Marked)1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed.

M & L for veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers one one face,4 mm thick fixed with screws to timber frame work

Taking down carefully copper/ aluminium point wiring (light, fan, call bell, socket or power) complete, including fittings and fixtures such as switches, ceiling rose, pendants, holders, regulators, sockets, light fitting etc. & removing from site and making good the disturbed surfaces of wall, ceiling etc. complete all as specified and directed

M & L for point wiring with FR PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC casing & caping terminated in PVC block 50 mm deep (sunken) for fixing of switches, sockets, fan regulators etc (PVC box of required size will be measured and paid under relavent item) for the following: - (a) One light point controled by one one way 5 Amp switch

(b) One fan point controlled by one , one way 5 Amp switch

(c ) One 5 pin socket outlet 05 Amp on independent board .

(d ) One 5 pin socket outlet 05 Amp on same board .

All as per item No 137 here-in-before,for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 1.5 sq mm,PVC insulated single core cable for earth continuity conductor.

M & L for sub main wiring with 3 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC casing-caping complete all as directed by Engr-in-Charge.(4 Runs of FR PVC cable shall be measured as one unit)

S & F Switch piano, flush type single pole, one way 5 Ampr all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Ampr all as specified and directed.

S & F Switch socket combination 2 in 1, 5 Amp flush typer all as specified and directed.

S & F Switch socket combination 5A/ 16A, 5 in 1flush typer all as specified and directed.

S & F stepped type electronic fan regulator flush typer all as specified and directed.

Supply & fix ceiling rose, 3 terminals, surface bakelite, /PVC/Polycarbonate.r all as specified and directed.

Supplying & fixingLED tube light fitting, 1 x 18 watt bipin holders, connector block etc. complete with all accessories internally pre-wired with and including 18 watt tube rod and connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified & directed

S&F lamp Holder insulated body with back plate angle/straight type suitable for batten complete all as specified and directed.

S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.

S&F single pole and neutral DB wall mounting type,240 Volts,8Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete.

S&F SPN DB wall mounting type,240 Volts, 4Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch complete.

S & F MCB SPN 40 Amps 240 volts Make: Havells or equivalentr all as specified and directed.

S & F MCB SP 6 to 32 Amps 240 volts Make: Havells or equivalentr all as specified and directed.

S & F LED building security light fitting 25W new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOPOPENINg seperate driver compartment with IP65 protection and impact resistance of IK07 including bracket for mounting. Make: Havells or equivalent

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 5 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways complete all as specified & directed by Engineer-in-Charge.

S & F fan hook in ceiling made of MS clamp & hook made of iron deformed to proper shape including nut bolts,down rod complete all as specified & directed.

S & F heavy duty exhaust fan 300 mm sweep,240 Volts, turbo force 1400 RPM with louvre including necessary connection with three core round flexible copper wire of 1sqmm connector to fan, minimum 1m lenghth complete all as directed .

Supply and Fix ceiling fan of 1200 mm sweep 5 star rating and connecting up including provision of cable from ceiling rose or connector to fan with flexible cable copper conductor all as specified and directed.

Supply & fixing PVC poly carbonate round blocks 10 cm dia. r all as specified and directed.

S&F for bell push flush type 5 Amps single pole 230 Volts AC Circuit complete all as specified and directed.

Supply & fixing calling bell SP 230 volts and taking down U/S call bell.Musical type Make Anchor/Havells.

S & F verticle triple pole and neutral distributed board (load line) with sheet metal enclosure, 6 ways, 415 volts with 200 Amps bus bar wall mounting type double door,with MCCB incomer including taking down existing old DB.

S & F MCCB curve four pole, 415 volts, 100 Amps with breaking capacity 10kA, Make: Havells or equivalent

S & F MCB SPN 6 Amps to 32 Amps 240 volts Make: Havells or equivalent

Taking down old unserviciable bulk head fitting & Supply & fix surface mounted ,decorative oval bulk head edge-lit LED luminaire of capacity 10W complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete. Make: havels or equivalent CAT No RUGBYNEONFT10WLED760SSYMBOPC

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out including trimming of sides complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer compete all as specified and directed by Engineer-in-Charge.

Removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-charge.

Material and labour for sand cushioning with a layer of sand 8cm thick before laying of cable and 10 cm thick after laying of cable in trenches complete all as specified.

Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable all as specified and directed.

Taking down old unserviceable any size of LT cable and Supply and laying, jointing, testing and commisioning LT XLPE/PVC cables, PVC insulated, PVC Sheathed armoured LT 1100 volt grades 16 Sqmm 2 core heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc.

Supply and laying 40 mm bore GI tubing light grade laid in trenches for cable protection.

M & L for concealed point wiring complete with 1.5 sq mm FR,PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of suitable size and conduit accessories fixed on wall roof etc, and including proven of PVC insulated 1.5 sq mm copper conductor for earth continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 3 mm thick on top for housing the switches socket,outlet etc.,all as specified and directed by Engineer-in-Charge :- Note caused of PVC conduit cutting chases of wall making good disturbed wall surfaces including finishing with cement mortor 1:4 matching with existing shade/pink of the painted surface are deemed to be included in the quoted rate. (a) One light point controled by one one way 5 Amp switch

(b) One fan point controlled by one , one way 5 Amp switch and regulator

(c ) One 5 pin socket outlet 05 Amp on independent board .

(d ) One 5 pin socket outlet 05 Amp on same board .

(e) One bell/buzzer point controlled by one push button same board with other switch or independent

All as per item No 179 here-in-before,for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 1.5 sq mm,PVC insulated single core cable for earth continuity conductor.

M & L forconcealed sub main wiring with 2 run of 6 sq mm,single core ,PVC insulated ,unseated cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC conduit pipe and acessories on surface wall/floors/concealed etc. with one run of PVC insulated 6 Sqmm copper conductor for earth continuity conductor including taking down old unserveacible wiring as specified and as directed.Note:- Two runs of cable one run of conduit and one run of copper wire shall be measured as one unit length.

Taking down old unserviceable any size of LT cable and Supply and laying, jointing, testing and commisioning LT XLPE/PVC cables, PVC insulated, PVC Sheathed armoured LT 1100 volt grades 50 Sqmm 3.5 core heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc.

FREEZCON

M/s PRABIR ENTERPRISE

STANDARD ELECTRIC WINDERS

M/S S. P. ENTERPRISE