02. TOURISM DEVELOPMENT OF SONBARSA DHAM, LOCATED IN THE KUDHANI BLOCK OF MUZAFFARPUR DISTRICT.

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LIMITED

Technical Sheet

Name of Work TOURISM DEVELOPMENT OF SONBARSA DHAM, LOCATED IN THE KUDHANI BLOCK OF MUZAFFARPUR DISTRICT. Cost of Work as per BOQ(Rs in Lakhs) 631.8687 Time of Completion in months 12 ALL COLOURED CELL TO BE FILLED ACCORDINGLY

Sactioned Amount 69535100 Date of Sanction 2026-09-17T00:00:00Z Date of Tender 2026-10-14T00:00:00Z

Sl No. Items Requirement Cl. No. Name of the Contractor

Address of the Contractor

1 Registration No.

2 Bid Validity Bids shall remain valid for a period not less than 120 days after the deadline date. A Bid valid for a shorter period shall be rejected by the Employer as non-responsive 120 Days 15.1 Bid validity periods In days

3 Bid Security (A) Online mode i.e. internet payment gateway (credit/ debit card), Net Banking, NEFT/ RTGS 16.1 Amount To be entered (Rs in Lakhs)

(B) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given (If issued from any bank outside state will be converted to any bank within the state before executing the agreement. Amount To be entered (Rs in Lakhs)

Bid Security Amount - (Rs. In Lakhs) 12.74 Bid Security Amount - Rs.

4 (i) Legal Status of Bidder. 4.3(a)

(ii) Place of Registration.

(iii) Principal place of Business

(iv) Power of attorney of signatory Bid Attached or Not 4.2(iv)

5 Total value of civil engineering construction work performed in last five years. 1. Annual Financial Turn Over usually not less than 50 % of the estimated annual payments under the contract (Rs in Lakhs) APPENDIX to ITB

2021-22 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.469

2022-23 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.36

2023-24 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.26

2024-25 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.166

2025-26 Amount To be entered (Rs in Lakhs)

Escalation Factor= 1.08

6 Work Experience of Similar nature Satisfactory completed atleast one similar work of value not less than 50 % of estimated value of contract (Rs in Lakhs) 4.5 (b) Amount To be entered (Rs in Lakhs)

7 Minimum Quantities of work done as prime contractor in any one year during last five years. Items Unit Total Quantity 4.5 ( c )

Earth Work cum 1944.5 Value to be entered in unit cum

Brick Work cum 189.4 Value to be entered in unit cum

Electrical Works Rs. 2977360.9 Value to be entered in Rs.

PHE Work Rs. 638799.5 Value to be entered in Rs.

PCC&RCC cum 819.1 Value to be entered in unit cum

Steel MT 57.3 Value to be entered in MT

Flooring Work. ( Granite, Marble, Kota, Sand Stone, Paver Block, Ceramic Tiles etc.) sqm 1125.5 Value to be entered in unit sqm

8 Bidding Capacity More than the total Bid value of present work = A*N*3-B=Rs. ____.Where A = Maxm. Value of work executed in any one yr during last 5 yrs. N= Nos of years for completion of works. B=Value of existing commitments & ongoing works to be completed in period (Rs in Lakhs) 4.4

9 (a) Existing commitments and ongoing works Amount To be entered (Rs in Lakhs)

(b) Work for which Bid already submitted Amount To be entered (Rs in Lakhs)

10 Availability of key items of Contractor's Equipment Type of Equipment/Maximum age No. Required Nos. Max. Age Page-17 Nos./ Max. Age

Front end Loader 1 5

Plate Vibrator 2 5

Niddle Vibrator 2 5

Water tankar 2 5

Steel shuttering 2500sft 5 to 7

Concrete Mixture 1 5

11 Key Personnel Personnel/Qualification/Contract Package Size (Rs. 02 to 10 Crore) Page-18 Name of the Personnel and Experince in years

Site Engineer/ B.E. Civil + 07 Years Exp. (3 years in Building Construction) or retired A.E. 1 No.

Plant Engineer/ B.E. Civil + 05 Years Exp. or Dip. Electrical + 07 Years Exp. or Retired J.E. 1 No.

Site Supervisor/ Fresh Graduate in Civil or Diploma Civil + 03 Years Exp. or retired I.T.I Holder. 1 No.

12 Evidence of accesses to Financial Resources Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (Not more than 3 months old). (Rs in Lakhs). 4.2(i) Amount To be entered (Rs in Lakhs)

13 Proposed methodology and programme of construction. Justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per milestones. (Attached or not) 4.3(l)

14 Litigation History Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)

15 Affidavit Regarding statements made in the required attachments are true and correct. Page-24

16 Undertaking Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. (Rs in Lakhs). 4.2(ii)

17 NOC for Debar (Affidavit)

BIHAR STATE TOURISM DEVELOPMENT CORPORATION LTD.

(A GOVERNMENT OF BIHAR UNDERTAKING)

TOURISM DEVELOPMENT OF SONBARSA DHAM, LOCATED IN THE KUDHANI BLOCK OF MUZAFFARPUR DISTRICT.

QUOTING SHEET FOR BIDDERS

Name of Contractor

Address of Contractor

E-mail ID of Contractor Mobile Number

NIT - RE-TENDER NO. 34/E-TENDER/ BSTDC/SBD/2026-27, GR-02

Sl No. Description Estimated Amount Rate Quoted by Contractor

% Above/Below TOTAL QUOTED AMOUNT Rs.(In Figure) TOTAL QUOTED AMOUNT Rs.(In Words)

1 Total Schedule Amount (Rs.) 57834047

2 Total Non-Schedule Amount (Rs.) To be Quoted !

TOTAL AMOUNT Rs. 63186870

TOURISM DEVELOPMENT OF SONBARSA DHAM, LOCATED IN THE KUDHANI BLOCK OF MUZAFFARPUR DISTRICT.

Based on SOR FOR BCD BIHAR - 2022 & B.S.R (ELECTRICAL) 2023

Sr. No. Item No. Item Of Work Quantity Unit Rate (Rs.) Amount (Rs.)

1 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil 644.965 100 Sqm. 1355.4 8741.85561

2 2.6.1 Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. All Kinds of Soil 62.92125 Cum. 314.9 19813.901625

3 2.8.1 Earthwork in excavation in foundation trenches or drains (not exceding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All Kinds of Soil 1917.067 Cum. 360.7 691486.0669

4 2.9.1 Excavation work in foundation trenches or drains not exceeding 1.5 m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms lift upto 1,5m, including getting cut the excavated soil and disposal of surplus excavated soiis as directed, within a lead of 50 m. Ordinary rock 263.081 Cum. 568.598 149587.330438

5 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming, consolidating and dressing complete. 1750.99580625 Cum. 287.3 503061.09513562504

6 20.2.1 Boring, providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring, with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (Length of pile for payment shall be measured upto bottom of pile cap). 300 mm dia piles 2015.1 Metre 902.6 1818829.26

7 11.72 Providing designation 100A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I 2691.7632500000004 Sqm. 283.3 762576.5287250001

8 323 (BCD) Separation Membrane of impermeable plastic sheeting 125 micron thick 199.16 Sqm. 12 2389.92

9 4.1.8 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1.4.8 (1 Cement : 4 coarse sand : 8 graded stone agregate 40 mm nominal size) 2.1951249999999995 Cum. 2975.2 6530.935899999999

10 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centering and shuttering-all work upto plinth level. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 148.88315000000003 Cum. 3434 511264.7371000001

11 4.1.4 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) 0.54 Cum. 3879.4 2094.876

12 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering - all work upto plinth level. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 65.66 Cum. 3998.1 262515.246

13 4.2.1 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, post. struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plin window sills, fillets etc. upto floor five level excluding the cost of centring, shuttering and finishing: 1:1:2 (1 Cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) 6.97653 Cum. 6855.6 47828.29906800001

14 5.1.6 (WRD) Earth work in excavation of canals and dhars caring minimum full supply discharge above 28 cumecs (1000 cusecs) in ordinary soil (vide classification of soil item -A) and making the banks with excavated earth in proper profile and clod breaking and laying earth in 225 mm layers with an Initial lead of 30 M and lift of 1.5 M all complete as per specifications and direction of E/I 1646 Cum. 189.4 311752.4

15 5.1.11 (WRD) Extra for earth work in marshy, slushy and daldal soil (vide classification of soil item F) all complete as per specifications and direction of E/I 1646 Cum. 88.6 145835.59999999998

16 5.1.18 (WRD) Earth work in bed clearance or desilting of canals caring full supply discharge of 28 cumecs (1000 cusecs) or more in dead courses of river etc, in ordinary soil and removing the excavated earth in proper profile in spoils etc.with an initial lead of 30 mtr and lift of 1.5M all complete as per specifications and direction of E/I. 1646 Cum. 146 240316

17 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 333.33573500000006 Cum. 5863.2 1954414.0814520002

18 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 9.062125 Cum. 5063.4 45885.163725

19 5.33A.1 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete. All work upto plinth level Add or deduct for providing richer or leaner mixes respectively at all floor levels. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. 453.09000000000003 Cum. 4921.4 2229837.126

20 6.1C+6.1.14C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand) 13.49 Cum. 4923 66411.27

21 6.1C+6.1.14C+6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). Extra for Brick work in superstructure above plinth level upto floor V cum. 148.46625 Cum. 5765.2 855937.6245

22 6.1A+6.1.14A Brick work with bricks of class designation 100A in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 4.2700000000000005 Cum. 4819.9 20580.973

23 6.1A+6.1.14A+6.3A Brick work with bricks of class designation 100A in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand). Extra for Brick work in superstructure above plinth level V cum 194.81859756097563 Cum. 5662.099999999999 1103082.38125

24 6.1A+6.1.12/1+6.3A Brick work with bricks of class designation 100A in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) Extra for Brick work in super structure above plinth level upto floor V cum 17.7 Cum. 5860.1 103723.77

25 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead. 1162.3787499999999 Cum. 123.9 144018.72712499998

26 6.45.2 Half brick masonry with non modular fly ash bricks of class designation 10, conforming IS : 12894, in superstructure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand) 235.29 Sqm. 700.8 164891.232

27 6.18A+6.18.4A+6.19A Half brick masonry with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for half Brick masonry in superstructure above pinth level upto floor V level. 6.51 Sqm. 689 4485.389999999999

28 5.33A.2.2 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete. All works above plinth level upto floor V level Beams, plinth beams, girders, bressumers, cantilevers, Suspended floors lintels roofs and staircases including spiral staircases, shelves etc. Add or deduct for providing richer or leaner mixes respectively at all floor levels. Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. 124.55997500000002 Cum. 5841.7 727642.0059575001

29 5.33A.2.1 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centering, shuttering finishing and reinforcement, M-20 grade reinforced cement concrete Walls columns, pillars, posts cind struts Providing M-25 grade R.C.C. instead of M-20 grade R.C.C. 26.958168 Cum. 5458 147137.680944

30 5.9.15 Centring and shuttering including strutting,propping etc. and removal of form for. Small lintels not exceeding 1.5 m clear span, mouldings as in cornices, window sills, string, courses, bands, copings, bed plates, anchor blocks and the like. 93.0204 Sqm. 224.2 20855.173679999996

31 13.39.2 Extra for plastering done on moulding cornices or architraves including neat finish to line and level: In two coats 20.3472 Sqm. 473.2 9628.29504

32 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white, Ivory, Grey, Fume Red, Brown, laid on 20 mm thick Cement motar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 82.47 Sqm. 862.4 71122.128

33 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 553.5300000000001 Sqm. 795 440056.3500000001

34 8.12a Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm(avearage) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 1672.8286000000003 Sqm. 2147.7 3592733.9842200004

35 0089 Hire charges of sand blasting equipment 30 Day 480 14400

36 8.13.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 110.1175 Sqm. 3605.2 396995.61100000003

37 11.41A.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm 300.23125 Sqm. 1022.7 307046.499375

38 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 500 x 500 mm. 33.8475 Sqm. 1251 42343.222499999996

39 13.11.4 12 mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) 1447.42025 Sqm. 141.5 204809.965375

40 13.24.2 6 mm cement plaster to ceiling of mix: 1:4 (1 cement : 4 coarse sand) 638.32875 Sqm. 125.6 80174.091

41 13.13.4 20 mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) 2650.550496585366 Sqm. 192.1 509170.7503940488

42 13.38.2 Extra for plastering on circular work not exceeding 6 m in radius : In two coat 20.3472 Sqm. 29.1 592.10352

43 13.36.5 Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 20 mm cement plaster 1:4 (1 cement : 4 sand) 78.24 Sqm. 12.8 1001.472

44 11.3.1 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 362.71000000000004 Sqm. 289.1 104859.46100000002

45 4.12 Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers. 300 Per 50 kg cement 57.16 17148

46 5.9.1 Centering and shuttering including strutting, proping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete 170.45 Sqm. 211.6 36067.219999999994

47 5.9.2 Centring and shuttering including strutting, propping etc. and removal of form for. Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 4301.075 Sqm. 375.1 1613333.2325

48 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, griders, bressumers and cantilevers. 1130.917625 Sqm. 404.7 457682.3628375

49 5.9.6 Centering and shuttering including strutting, Propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts. 1488.56224 Sqm. 494.4 735945.171456

50 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. 649.3199999999999 Sqm. 437.5 284077.5

51 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases. 1259.2692 Sqm. 439.9 553952.52108

52 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1:5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) 59.7975 Cum. 5670 339051.825

53 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 3906.9154465853658 Sqm. 105.4 411788.8880700976

54 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 2564.195196585366 Sqm. 137 351294.74193219515

55 13.78.2 Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 2004.4490000000005 Sqm. 38.7 77572.17630000002

56 13.77A.1 Distempering with 1st quality washable distemper (ready made) of approved manufacturer and of required shade and colour complete. As per manufacture's specifications. Two or more coats on new work 1981.0490000000004 Sqm. 56.6 112127.37340000003

57 16.22 Providing and fixing 15x15x90 cm boundary stone of hard stone with top 30 cm chisel dressed on all four sides including top (cost of excavation, refilling and concrete etc. to be paid for separately). 200 No.s 168 33600

58 10.6.2 Supplying and fixing-rolling shuters of approved make. made of required size of M.S.Iaths inter locked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs grade no. 2 and M.S. top cover of required thickness for rolling shutters. 80x1.20 mm thick M.S. laths with 1.20 mm thick top cover. 10.56 Sqm. 2533.2 26750.592

59 10.7 Providing and fixing ball bearing for rolling shutters 10.56 Sqm. 424.2 4479.552

60 10.8.1 Extra for providing mechanical device chain and crank operation for operating rolling shutters: 10.56 Sqm. 1108.7 11707.872000000001

61 13.81.1 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 51.39 Sqm. 39.7 2040.1830000000002

62 13.81.3 Applying priming coat with ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel work 64.59 Sqm. 34.6 2234.8140000000003

63 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work 115.98 Sqm. 84.5 9800.31

64 9.6.3 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, all complete as per directions of Engineer-in-Charge and panelling with panels of : 12 mm thick prelaminated (with decorative lamination on one side and balancing lamination on other side) particle board Grade -1 medium density flat pressed, three layer and graded (FPT-1) conforming to IS :3087 bonded with BWP type synthetic resin adhesive as per IS :848 and prelamination conforming to IS :12823 Grade-1 Type I 45.09 Sqm. 2894.9 130531.04100000001

65 9.22.1 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to I.S. 2202 (part I). On one side only 45.09 Sqm. 408.1 18401.229000000003

66 9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal Wood 0.6799999999999999 Cum. 95670.7 65056.075999999994

67 9.118.1 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 17.325000000000003 Sqm. 1629 28222.425000000003

68 9.117.2 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer-in-charge. Extruded section profile size 42x50 mm 54.45 metre 251.8 13710.510000000002

69 9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete: 125 mm 50 Each 32.4 1620

70 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper 25 Each 60.8 1520

71 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/aneling,C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 350.8029 kg 418.4 146775.93336

72 21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ aneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) 136.9305 kg 447.2 61235.319599999995

73 9.48.2 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc 2538.5999999999995 kg 161.1 408968.4599999999

74 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness (weight not less than 13.75kg/sqm) 47.04 Sqm 1115.1 52454.304

75 26.23.1 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 mm reveal profile (white/black), comprising of main- T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 201.52375 Sqm. 1812.4 365241.64450000005

76 9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete: 300x16mm 25 Each 169 4225

77 9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 250x10 mm 25 Each 70.1 1752.4999999999998

78 9.63.3 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm 25 Each 48.4 1210

79 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying including painting the exposed portion of loop, all as per standard design complete. 22 Each 174.6 3841.2

80 1010 (BCD) Mild steel plates density = 7850 Kg/m3 4.280493 Quintal 5400 23114.6622

81 1035 (BCD) Bolts and nuts above 300 mm in length 1.975 Quintal 5300 10467.5

82 638 (BCD) Bright finished or black enameled mild steel screws 30 mm 490 100 Nos 45 220.5

83 10.36 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 213.8175 kg 546.8 116915.40899999999

84 10.16.1 Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coar of approved steel primer, welded and bolted including special shaped washers etc. complete: Hot finished welded type tubes 254.11452000000003 kg 123.9 31484.789028000007

85 10.2 Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved ateef primer all complete. 13887.601875 kg 95.4 1324877.218875

86 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 1312.1999999999998 Metre 47.1 61804.619999999995

87 12.1.3 Providing corrugated G.S. sheet roofing fixed with G.I.J. or hooks, bolts and nuts 8 mm diameter with bitumen and G. I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on over lapping of sheets complete (upto a pitch of 60°) excluding the cost or purlins, rafters and trusses. 1.00 mm thick with zinc coating not less than 275 gm/m z 14.19 Sqm 1257.3 17841.087

88 12.6.1 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with G.I.J. or L hooks. Bolts and nuts 8 mm dia. G. 1. limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gm/m 2 Consider the length of the ridge 10.35 metres. The ridge will be made out of plain G. I. sheets 0.9 m x 1.8 m 4.3 Metre 599 2575.7

89 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

90 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 164.71875 Sqm. 436.6 71916.20625

91 16.78.1 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 262.31600000000003 Cum. 1310.4 343738.8864000001

92 6.01 (RCD) Dry Lean Cement Concrete Sub- base Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. a)Basic rate- 4260.18, b) add cess@1% - 42.60 c) Total (a+b)- 4302.78 d) add gst on 'c' - 516.33 e) Final Rate (c+d) - 4819.11 135.70000000000002 Cum. 4819.11 653953

93 6.02 (RCD) Cement Concrete Pavement Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing a)Basic rate- 7509.80 b) add cess@1% - 75.098 c) Total (a+b)- 7584.898 d) add gst on 'c' - 910.18 e) Final Rate (c+d) - 8495.08 271.40000000000003 Cum. 8495.08 2305565

94 4.01 (RCD) Granular Sub-base with Close Graded Material (Table:- 400-1) Plant Mix Method (Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 ) for grading- I Material a)Basic rate- 3664.22 b) add cess@1% - 36.64 c) Total (a+b)- 3700.86 d) add gst on 'c' - 444.10 e) Final Rate (c+d) - 4144.96 271.40000000000003 Cum. 4144.96 1124942

95 8.01/408 (RCD) Cast in Situ Cement Concrete M20 Kerb Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 a) Basic rate- 2175.49 b) add cess@1% - 21.75 c) Total (a+b)- 2197.24 d) add gst on 'c' - 263.66 e) Final Rate (c+d) - 2460.90 60 Per Metre 2460.9 147654

96 8.08/803 (RCD) Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces a) Basic rate- 79.90 b) add cess@1% - 0.799 c) Total (a+b)- 80.699 d) add gst on 'c' - 9.68 e) Final Rate (c+d) - 90.38 150 Sqm. 90.38 13557

97 11.78 Providing and laying factory made coloured chamfered edge Cement Concrete paver blocks of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern,finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc.complete as per manufacturer’s specifications & direction of Engineer-in-Charge. 60mm thick C.C.paver block of M-35 grade with approved colour, design & pattern. 2.8499999999999996 Sqm. 714 2034.8999999999996

98 11.77 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 904.5 Sqm. 721.1 652234.9500000001

99 16.3.9 Supplying and stacking at site. Good earth 1610.3875 Cum. 187.7 302269.73375

100 11.79.1 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength,thickness & size/shape, made by table vibratory method , to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with jamuna sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks,lawns, drive ways or light traffic parking etc. all complete as per manufacturer’s specifications & direction of Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour design and pattern 407.08 Sqm. 956.4 389331.312

101 23.10.1 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. 5000 100 sqm 319.6 15980

102 23.11 Renovating lawns including weeding.cheeling the grass,forking the ground, top dressing with sludge or manure,mixing the same with forked soil,watering and maintaining the lawn for 30 days or more till the grass forms a thich lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure. 5000 100 sqm 1964.1 98205

103 23.13 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%). flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as drected, within a lead of 50 m lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately). 702.3125 Cum. 126.9 89123.45625

104 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 85.25999999999999 Sqm. 3605.2 307379.35199999996

104 23.16 Providing and fixing M.S. fiat iron tree guard 60 cm dia. And 2 m high above ground level formed of 4 nos. 25x6 mm and 8 nos. 25x3 mm vertical M.S. flats hvetted to 3 nos. 25x6 mm M.S. flat iron rings in two halves, bolted together with 8 mm dia. And 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects. 10 Each 3597.7 35977

105 16.70.2 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 166.75 Sqm. 729.4 121627.45

106 8780 (BCD) Kerb Stone Block M30 Grade of Size 375mm x 300mm 1770.6666666666667 Each 79 139882.6666666667

WATER SUPPLY SANITATION

107 B.S.R 12.78.2 Providing and fixing on wall face unplastidsed PVC (working pressure 4 kgf per sqm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. 110 mm diameter. 195 Metre 257.5 50212.5

108 B.S.R 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid 12 Each 4230 50760

109 B.S.R 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 1 Each 4470.9 4470.9

110 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 6 Each 3723.2 22339.199999999997

111 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 9 Each 2764.4 24879.600000000002

112 B.S.R 17.28.2.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia 22 Each 104.4 2296.8

113 17.10.1.3 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm 1 Each 5499.1 5499.1

114 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 6 Each 713.3 4279.799999999999

115 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter 4 Each 166.3 665.2

116 B.S.R 18.9.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes 75 Metre 205.3 15397.5

117 B.S.R 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the wall etc. 15 mm nominal outer dia Pipes 457 Metre 278.2 127137.4

118 B.S.R 18.9.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal inner dia Pipes 443 Metre 294.7 130552.09999999999

119 B.S.R 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI :12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 11000 Per litre 9.7 106699.99999999999

120 B.S.R 18.52.1 Providing and fixing C.P. brass stop cock (concealed of standard design and of approved make conforming to IS : 893115 mm nominal bore. 24 Each 594.8 14275.199999999999

121 B.S.R 19.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe 53 Metre 494.4 26203.199999999997

122 19.2.4 250 mm diameter S.W. pipe 75 Metre 666.5 49987.5

123 B.S.R 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete: 150 mm dia R.C.C. pipe 70 Metre 410.7 28749

124 19.6.3 250 mm dia R.C.C. pipe 60 Metre 677.4 40644

125 B.S.R 19.27.1 Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 5 Each 3743.3 18716.5

126 B.S.R 19.29.1 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame and vertical grating complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7 1 Each 7186.6 7186.6

127 B.S.R 19.30.1.1 Contructing brick masonry chamber for Underground C.I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455x610 mm internal dimentions, total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg.) RCC top slab with 1:1.5:3 mix (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1cement:3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design. Inside dimensions 466x610 mm and 45cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 5 Each 4266.8 21334

128 B.S.R 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with brick and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2 Each 33603.4 67206.8

129 B.S.R 19.34.1 Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm dia 13 Each 319.6 4154.8

130 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 45 Each 434.2 19539

131 17.69.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms 14 Each 109.7 1535.8

132 17.70.2 Providing and fixing PTMT Bottle Trap for Wash basin and sink.Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 14 Each 325.1 4551.400000000001

133 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 6 Each 397.3 2383.8

134 17.74 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 6 Each 430.7 2584.2

135 18.18.1 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore 14 Each 348.9 4884.599999999999

136 18.47.5 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required: 40 mm nominal bore 10 Each 633.4 6334

137 18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 6 Each 96.8 580.8

138 18.12.5 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore 58 Metre 476.8 27654.4

139 18.10.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore 50 Metre 589.2 29460.000000000004

Carriage of Material

140 Type of materials Quantity Unit Rate Incl. 1% Lab. Cess 12% GST

Difference cost of material

141 Add For Seigniorage Fee @10% of Basic Materials Rate (Cost including 12% GST) Quantity Unit

12%GST on Seigniorage 31207.688066973948

1.3 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required.

1.7 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

143 1.7.2 2X2.5 sq. mm + 1X 2.5 sq. mm earth wire 549.95 Metre 246 135287.7

144 1.7.3 2X 4 sq. mm + 1 X 4 sq. mm earth wire 300 Metre 309 92700

145 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 154 Metre 422 64988

146 1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 143 Metre 660 94380

147 1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire 65 Metre 1312 85280

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

1.22 Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.

150 1.22.1 75 mm X 75 mm X 50 mm deep 9 Each 139 1251

1.24 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required.

152 1.24.7 TV antenna socket outlet 4 Each 131 524

153 1.31 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 37 Each 414 15318

1.27.1 Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

154 1.27.1 1 or 2 Module (75mmX75mm) 8 Each 234 1872

156 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 32 Point 531 16992

157 2.5.3 Providing and fixing following capacity busbar chamber with 4 strips of suitable size made of copper, heavy duty, complete with all accessories including connections, earthing the body etc. as required. 200A 3 Each 10550 31650

2.7 Providing and fixing following capacity four pole ON-load panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

160 2.19 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. 9 Each 1513 13617

161 2.29 Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 25/32 amps 415 volts, "C" curve TPN MCB complete with connections, testing and commissioning etc. as required. 9 Each 1616 14544

162 2.3 Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 63 amps 415 volts, "C" curve TPN MCB complete with connections, testing and commissioning etc. as required. 9 Each 2431 21879

163 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 34 Each 34 1156

164 2.8.7 Supplying and fixing following way single pole & 2 + 12 way, Double door neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar,earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 3 Each 2314 6942

2.32 Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.

165 2.32.4 For 4 way, Double door TPN MCBDB 3 Each 1064 3192

2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required'

166 2.12.1 6 amp. To 32 Amp. SP MCB 240 volt 34 Each 237 8058

MAIN PANEL & SUBMAIN PANEL

2.4 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

173 2.2 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 6 Each 214 1284

174 3.21 OR 3.6 +3.8 +3.9 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth inspection pit etc. as required. OR Fixing & Hole cutting in earth as per drawing of (CU) (600mm X 300mm X 3mm) plate electrode earth, all complete as per specifications and drawings attached. (1No. EARTH for UPS Main nutral only.) -The rate shall be inclusive of submission of TEST REPORT (2 Ohm) of each earth pitand -caution Note -The rate shall be inclusive of submission of TEST REPORT (2 Ohm) of each earth pitand TESTING shall be carried out in front of Officials/Consultant 3 Set 16675 50025

175 3.11 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. 74 Meter 721 53354

176 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 70 Meter 53 3710

177 3.17 Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing etc. as required. 50 metre 144 7200

178 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. 5 Each 1056 5280

179 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 76 Meter 145 11020

180 4.9 Fixing of copper / G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 76 Meter 52 3952

181 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. As required. 34 Each 81 2754

182 4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 34 Each 102 3468

(SUPPLY OF CABLE MAIN & SUBMAIN)

7.1 Laying of one number PVC insulated and pVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required

183 7.1.3 Above 95 sq. mm and upto 185 sq. mm 203 Meter 336 68208

SUPPLY & INSTALLATION OF FIXTURES

184 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.10, air delivery minimum 210 cum/min including wiring the down rods of standard length (up to 30cm) with 1.5 sq mm FLRS PVC insulated copper conductor etc as required. 22 Each 2482 54604

185 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/switch box including connections but excluding modular plate etc. as required. 22 Each 358 7876

186 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 20 Sqft 1809 36180

187 8.12 Supply and fixing fabricated Feeder pillar of cubical construction, floor mounted type, fabricated out of 14 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator, with 40mm X 40mm X 5mm angle iron stand and complete in all respect etc and must be CPRI approved panel manufactures. (But without RYB LED lamp, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears, PCC work etc.) 10 Sqft 2261 22610

188 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 4 Each 6536 26144

189 8.17.1 Supply and installation of 300 mm sweep/sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 10 Each 2572 25720

190 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building) 21 Each 762 16002

191 5.7.3 Supply and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 12 watt 29 Each 1224 35496

192 5.9 Supplying and fixing recess mounting 36 watt LED flat panel (2' x2') with minimum efficacy 100 Im/w in comprising of pressure die cast housing, acrylic diffuser, IP 65 protection and complete with integrated electronic driver etc directly on false ceiling including connections with 1.5 sq mm FRLS PVC insulated copper conductor cable as required. 70 Each 2663 186410

193 6.1.6 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 15 watt LED lamp 14 Each 250 3500

194 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 22 Each 64 1408

195 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 14 Each 80 1120

196 1.35 Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required. 14 Each 72 1008

197 8.21.1 Supply and erection of 4 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 64 'C' series SP MCB, connector, and suitable size foundation bolts with template as required. (but without pole foundation) 38 Each 19292 733096

198 5.14.4 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, lP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 90 watt 38 Each 5516 209608

199 8.1.1 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. Above 4.5 metre and upto 6.5 metre 38 Each 3771 143298

200 7.7.6 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 16 sq. mm, 4 core 500 Metre 299 149500

202 7.1.1 Laying of one number PVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm 500 Metre 315 157500

TOURISM DEVELOPMENT OF SONBARSA DHAM, LOCATED IN THE KUDHANI BLOCK OF MUZAFFARPUR DISTRICT.

NON-SCHDULE ITEM

Sr. No. Item No. Item Of Work Quantity Unit Rate Amount(Rs)

1 NSI Supply and Plantation of Golden Duranta Hedge Plant in areas according to drawing, Architects and all complete as per Engineer in Charge. 150 Each

NSI Supply and installation of Red Stone park Bench deminsion is 3' X 1.5' X 5' with complete fitting as per direction of Architects and Engineer in charge. 22 Each

NSI Providing and fixing of Hindware counter wash basin of size 430X130 mm cat no 91069 with C.I Brackets 15 mm C.P brass pillar taps 32 mm C.P Brass waste of standard pattern including painting and bracket cutting and making good the wall (oval Shape) 4 Each

NSI Providing and fixing soil, waste and vent pipes P.V.C. Pipe

Supply and fitting of Pvc 110 mm dia 35 Mtr

Supply and fitting of Pvc Door Tee 110 mm dia 22 Each

Supply & Fitting Door Bend 110 mm Dia 22 Each

Supply and fitting of Pvc 45 110 mm dia 22 Each

Supply & Fiiting Vent cowel 110 mm dia 17 Each

Supply & fiiting Pipe Clip 110 mm Dia 17 Each

Supply and fitting of FLOOR TRAP 110 x 110 mm dia 17 Each

NSI Construction of manual Boring including carriage of materials and as per directed by Engineer in charge. 2 Each

ELECTRICAL WORKS

MR Supplying & fixing High Mast light including of all job work with 250 watt. Flood light (12 pic) and 20 meter pole etc. All required items including all work associated as per Direction of Engineer-in-charge. 2 Each

MR M30 1050F Bolts 150 mm 258 Each

MR Feeder Pillar Design, fabrication, assembling, wiring and supply, installation, testing and commissioning of Distribution Panels fabricated out of (load bearing member of 2mm and non load bearing member 1.6 mm thick) GI sheet steel in cubicle compartmentised modular 3b construction, free standing floor mounted with bottom cable entry,300 mm MS painted stand and standing covering from 3 sides, IP 55 double door with canopy,dust and vermin proof with reinforcement of suitable size angle iron, channel, 'T sections and/or flats wherever necessary. 3 mm thick cable gland plates shall be provided at the bottom of the panels with appropriate stand etc. Panels shall be treated with all anticorrosive process before powder coating as per specifications and final approved shade. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3 phase, 4 wire, 50 HZ supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel in the form of shop drawings before fabrication. Galvanised hardwares with zinc passivation shall be used in fabrication of panels. (Make AAA Switchgear, Indiatech panel, Neptune india) Feeder Pillar (For External Landscape lighting) IP 55 for outdoor Protection Incomer 63 Amps 4 pole MCCB Bus Bars 100 Amps TPN Aluminium bus bars with heat shrinkable insulation sleeve. - 1 Set Outgoing 63 Amps two pole MCB incomer with 63 Amps DP contactor 0-24 hours timer auto / manual and outgoings including 6 No. 10/16/20 Amps SP MCB with separate neutral link of each phase-1 set (50%) 40 Amps DP MCB with 32 amp industrial sockets - 2 sets 63 Amps 4 Pole MCB - 2 set Feeder Pillar for external / landscape lighting as described above 2 Each

NSI Supplying & installing 1.5 Ton 5 star Split Ac of sinc with complete fitting and as per direction of Engineer in charge. 6 Each

NSI Supplying & installing 2 Ton 5 star Split Ac of sinc with complete fitting and as per direction of Engineer in charge. 2 Each

NSI Water Storage Capacity : 80 litres cold water storage & 8 litres tank dispensing online normal water Water Cooling Capacity : 60 LPH *Output water temperature being 17°c No. of Faucet : 2 faucets (1 cold & 1 normal) Outer Body Material : Full SS Outer Body Dimensions (LxWxH) (mm) 680 x 720 x 1460, Net Weight 83 kgs ± 2 kgs Refrigeration – Green (eco) gas R-134 A Green Gas Operating Voltage 230 ± 10%V AC, 50Hz Power Consumption in watts (Max) 700 W Purification Capacity Up to 50 ltr/hour* Pure water recovery Up to 70% Auto Sanitization – Storage Tank ESS – Electrolytic Sanitizing System – Active Silver protects storage water tank from external contaminations and offers pure water for 24×7. 1 Each

FIRE FIGHTNING WORKS

MR Providing and fixing with bracket/supports etc. wall mounted fire extinguishers as per detail below :

MR ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling (Mono Ammonium Phospate Powder) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS : 15683 : 2008. 4 Each

IP Varifocal Dome camera: Design, Supply, installation, testing and commissioning of 4 MP BULLET IP CAMERA. minimum 1 year warranty Make : Hikvision/ Bosch/ Pelco/ Honeywell/ GVD All Equivalent as per direction of engineer-in-charge 22 Pcs

Supply, installation, testing & commissioning of 8 PORT POE GIGA SWITCH Make: Hikvision /Bosch /Pelco/ Honeywell / GVD All Equivalent as per direction of engineer-in-charge 4 Pcs

Supply, installation, testing & commissioning of 4 TB Survillance HDD for camera recording. (24*7) Make: Hikvision / Bosch / Pelco / Honeywell / GVD All Equivalent as per direction of engineer-in-charge 2 Pcs

Supply, Installation,Testing and commissioning of 16 Channel NVR (Network Vedio Recorder) Make: Hikvision / Bosch / Pelco / Honeywell / GVD All Equivalent as per direction of engineer-in-charge 3 Pcs

Supply, installation, testing & commissioning of RJ 45 CONNECTOR Make: Hikvision / Bosch / Pelco / Honeywell / GVD All Equivalent as per direction of engineer-in-charge 20 Pcs

Supply, laying and termination of CAT 6 cable in existing conduits/ raceway/ cable tray for both video and control. All Equivalent as per direction of engineer-in-charge 880.0000000000001 Metre

Supply, installation, testing & commissioning of 43" inches LED screen suitable for showing out puts from NVRs on a single screen (24x7) complete in all respect complete as required. Make: Hikvision /Bosch /Pelco / Honeywell / GVD All Equivalent as per direction of engineer-in-charge 2 Pcs

FURNITURE WORKS

KING SIZE BED Minimalistic Design Big beds don't have to mean suffocated rooms. This bed comes with clean edges and a minimalistic headboard resulting in the bed taking up the least space possible. Elegant Aesthetics Beds are the central feature of any bedroom which makes choosing the right bed of utmost importance. The Adria King bed comes with an Imperial Oak finish that is sure to make your space as elegant as you are. Melamine Impregnated Finish We believe in looking deep into the detail. The Adria King Bed is laminated with Melamine Impregnated Paper which gives a crisp finish along with making for an easy clean. King Sized Lying down on a bed after a busy day is the best feeling ever. We make sure that nothing hampers this feeling for you. Therefore, this bed comes in a spacious King size. Easy Maintenance Headboards can take up a lot of space and intricate designs make them a cleaning nightmare. That is why this bed comes with a simple headboard which is easy to clean yet stylish. Net Weight (kg)- 107.4, Sales Package- 1 Bed, Primary Material Subtype- Particle Board, Finish Color - Imperial Oak, Dimensions W x H x D (cm) - 187.5 x 90.9 x 204.5 , Style - Contemporary & Modern, Seat Height (cm) - 44, Recommended Mattress Size Depth : 198.1 cm (78"), Width : 182.9 (72"), Minimum Thickness : 10.2 cm (4") Primary Material- Engineered Wood, Warranty- 1 Year Warranty Storage Included - No, Storage Mechanism - No Storage, Delivery Condition - Knock Down, Headboard Included - Yes, Country Of Origin - India 4 EACH

CIRCULAR CENTRE TABLE (SMALL) Smartly designed coffee table which is more than just mere tables in the corner. The luxurious matte black touch on the metal makes it an attractive statement in your living room, bedroom or study. Round and resilient marble on the top is more like the cherry on the top which imparts that essential wholesome look to the table. Marble Size : 30 Inches Diameter Height : 18 Inches Material : Stainless Steel with PVD Finish & Black Marble Color : Black and shine Gold Best for living Room, Guest Room Handmade Item High Quality Metallic Construction 100% Rust-free Note :The top is made of marble, the texture and look might vary since its stone. Box Contains : The package that we sends consist of Table and marble with a triple layering of bubble-wrap and safely packed in a box 2 EACH

SINGLE SOFA S/F/F Sofa (Make IKEA/HERMAN MILLER/GODREJ/HAWORTH) 1Seater Sofa for lounge seating of overall size - 86cm (W) x 92cm (D) x 82cm (H) & Seat Height 45cm. 1) SEAT FOAM: The seat is made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of PU foam with Density 28 ± 2 kg/cu.mtr. Seat is upholstered with fabric or leatherette. 2) BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu.mtr with two additonal top layer of supersoft foam of density 23 ± 2 kg/cu.mtr upholstered with fabric or leatherette. 3) UNDERSTRUCTURE: Understructure is made up of 1.2 ± 0.1 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-184 Dia 4mm zigzag spring assembly is mounted in understructure for support and additional cushioning purpose. 4) LEG ASSEMBLY: It is a welded assembly made in stainless steel (grade SS 202) tube & plate. 5 EACH

3 SEATER SOFA S/F/F Sofa (Make IKEA/HERMAN MILLER/GODREJ/HAWORTH) 3Seater Sofa for lounge seating of overall size -205.5cm (W) x 92cm (D) x 82cm (H) & Seat Height 45cm. 1) SEAT FOAM: The seat is made of PU foam with Density 32 ± 2 kg/cu.mtr having an additional top layer of PU foam with Density 28 ± 2 kg/cu.mtr. Seat is upholstered with fabric or leatherette. 2) BACK FOAM: The back is made of PU foam with Density 28 ± 2 kg/cu.mtr with two additonal top layer of supersoft foam of density 23 ± 2 kg/cu.mtr upholstered with fabric or leatherette. 3)UNDERSTRUCTURE: Understructure is made up of 1.2 ± 0.1 cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-184 Dia 4mm zigzag spring assembly is mounted in understructure for support and additional cushioning purpose. 4) LEG ASSEMBLY: It is a welded assembly made in stainless steel (grade SS 202) tube & plate. 5 EACH

WOODEN WARDROBE Contemporary Design The sleek lines and minimalist aesthetics of this modern wardrobe bring a touch of elegance to any bedroom. Its seamless design combines functionality with stylish sophistication. Hanging Rod It is sturdy and spacious, perfect for neatly organising your clothes. Designed to support a variety of garments, this wardrobe ensures that whether it is a long dress or coat, you clothes remain tidy and accessible. External Drawer with a Lock The external drawer with lock for this wardrobe offers secure storage for valuables, ensuring peace of mind. Its design seamlessly integrates with your wardrobe, combining functionality with contemporary style. Secure Door Lock The secure door lock of the wardrobe ensures your belongings are safely stored, offering peace of mind with its robust, tamper-proof design. Engineered for durability, it provides reliable protection against unauthorized access. Sturdy Construction Crafted with engineered wood and reinforced joints, this wardrobe ensures unparalleled durability and stability, promising years of reliable use. Its sturdy construction guarantees your belongings stay secure and organised. Net Weight (kg) : 129, Sales Package : 1 Wardrobe, Dimensions W x H x D (cm) : 150 x 180 x 50, Finish Color : Brown Primary Material : Engineered Wood, Primary Material Subtype : Particle Board, Number of Lockers : No Locker Warranty : 1 Year Warranty, With Mirror : No, Number of Drawers : 1 Drawer, Number of Shelves : 8 Shelves, With Overhead Unit: No , Door Type :Hinged 4 EACH

TV CABINET WITH BOX Grand Feel with Compact Size The width of the unit is a benevolent 1350mm – with more than enough surface and storage space while, the smooth curves project the feeling of a long, large and luxurious unit which can accommodate upto 53 inch TV. Optimised Storage The volume of the unit is optimized to provide the perfect combination of open-display space to showcase products along with concealed storage space to hide products that are used infrequently. Wire Management Unit Wire management provision from TV to set top box through the panels ensures neat, concealed wiring organization of devices. Curvilinear Design The design of this unit is inspired by smooth curves, circlesand quadrantsto form a harmonious concept that stands apart and breaks the modernism trend of straight edges & sharp lines. Storage Space Sparkle TV Unit fits well into all home aesthetics Country Of Origin - India, Delivery Condition : Knock Down, Dimensions W x H x D (cm) - 180 x 180 x 40, Finish Color : Walnut, Sales Package : 1 TV Unit, Primary Material : Engineered Wood, Number of Drawers : 6 Drawers, Number of Shelves : 9 Shelves 4 EACH

CAFETERIA DINING TABLE WITH 2 CHAIR bout Material and Finish: The Janet 2-seater dining set is made with high-quality, premium sheesham wood, ensuring both durability as well as stability. You will find these dining sets come in two different finishes: honey and walnut finish. Material - Sheesham Wood, Color : Brown , SEATER : 2 Seater, FINISH : Walnut Finish, Table Dimensions(Inch) : 28 L x 28 W x 30 H, Table Dimensions(Cm) : 71.1 L x 71.1 W x 76.2 H, Chair Dimensions(Inch) : 18 L x 18 W x 35 H Chair Dimensions(Cm) : 45.7 L x 45.7 W x 88.9 H NOTE : Its noteworthy that the chairs/bench of dining table sets would not get entirely nested beneath the table. Brand : Wooden Street, STORAGE : Without Storage FEATURES : Without Armrest , Shape : Square 2 EACH

CAFETERIA DINING TABLE WITH 6 CHAIR About Material & Finish Made of high-quality Sheesham wood, this 6 seater dining table set is sturdy in nature and offers lasting durability. You can choose from a range of variant finishes when purchasing the Wertex 6 Seater Dining Table Set. Product Features This dining table set perfectly blends style and functionality. The deep finish of the table and chairs adds a touch of elegance to any dining room. It is sturdy and well-constructed, with a smooth tabletop that is easy to clean. Chairs included in this dining set are comfortable to sit in and provide ample support for long dining hours. The dining chair cushions are made of high-quality foam and fabric, ensuring both comfort and durability. The dining table has a modern look with clean lines and a minimalist approach, whereas the chairs feature a slightly curved backrest and tapered legs, making them stand out from other dining sets in the market. Overall, the Wertex 6-seater dining set is an excellent investment for anyone as It's stylish, functional, and built to last. With this set, you'll have a comfortable and elegant dining experience for years to come. Material - Sheesham Wood, SEATER - 6 Seater, FINISH - Honey Finish, Table Dimensions(Inch) - 67 L x 36 W x 30 H, Table Dimensions(Cm)- 170.2 L x 91.4 W x 76.2 H, Chair Dimensions(Inch) - 19 L x 18 W x 40 H Chair Dimensions(Cm) - 48.3 L x 45.7 W x 101.6 H NOTE- Chairs of dining table sets would not get entirely nested beneath the table. Brand- Wooden Street, STORAGE : Without Storage , FEATURES : Without Armrest, Shape : Rectangle 2 EACH

KITCHEN ISLAND Kitchen Island Unit with Two Burner Range: Kitchen Island Unit made of Stainless Steel Sheet and SS Square Frame with Two Burner Range of total size 12'W x 2.5'D with height 32" and 28" will be in two parts fitted with drawer for keeping spices and salt below cook top. A sliding shelf will be provided under the cook top & drawer for the store of waste cooking materials, additional shelf will be given in bottom for keeping cooked food. In another part a ss sink with swan head tap will be fitted. And also making arrangement for keeping LPG cylinder inside a covered cupboard along with three drawer unit for keeping kitchen items. The material used in fabricating the above items is such as Top Sheet 18 guage, Shelf & facia will be in 22 guage in 304 Grade, Legs & Frame -- square pipe in Grade 202, as per drawing. 1 EACH

KITCHEN HOOD Kitchen Hood: Fabricating of Kitchen Steel Hood of Size 72"x36"x20" with filter along with ducting pipe in GI sheet and exhaust fan for out-let to remove particles such as dust, dirt, smoke etc. The out-let pipe will be hanged with fast nut in the ceiling 1 EACH