Loading…
Loading…
Tender Value
₹2.7 Cr
EMD Value
₹5.3 L
Closing Date
13 Jul 2026, 6:00 pm5d left
EXECUTIVE ENGINEER PRN SOUTH
Room No 305, CCC,TF
Construction of 100 feet wide D8 (Varun Path) sector road from New Sanganer road to Mangaywas road in PRN Zone JDA, Jaipur (Part-1)
2026_JDAJP_572967_1
JDA-EE-PRN-10-2026-27
Open Tender
Civil Works
180 days
PRN SOUTH AREA
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
ONLINE JDA WEBSITE
₹5.3 L
Yes
3 Jul 2026
3 Jul 2026
17 Jul 2026
4 Jul 2026
13 Jul 2026
4 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing reinforced concrete precast kerb stone or dand R.Mtr of M-20 grade cement concrete 120 cm long having 4 Nos. bars of 8 mm dia hysd and stirrups 6 Nos of 6 mm dia as per IS with in built provision of interlocking of jointing and lifting compaction of reinforced concrete by mechanical and table vibrators jointing at site with cement mortar 1:4 complete in all respect as directed by Engineer incharge on: 100 mm thick cement concrete 1:4:8 (1 Cement : 4 Coarse sand : 8 stone aggregate 20 mm thick nominal size) including excavation of earth and cutting of BT road cutting of WBM road etc. and disposal of surplus material with all lead and lift.
The size of kerb shall be (11.5+16.5)/2*30+(16.5*7.5) | - | Rmt | 617 | - |
| 2 | Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. | 1 | Sqm | 500 | ₹499.5 |
| 3 | Supply of ‘L’ type Bollard made out of 1.25 mm thick M.S. sheet height 134 cm, welded in circular type ring section having upper dia 15 cm. and lower dia 21 cm with another attachment of 15x15 cm circular section with 15 cm. face plate and hold fast at bottom, whole body is processed in white stoving enamel and red reflective 3 hands, each of 7.5 cm end one reflective sheet of 15 cm. dia provided to it complete in all respect. | - | Each | 2,123 | - |
| 4 | Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all arount it. | - | Each | 840 | - |
| 5 | Supplying and Fixing of Cat's Eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of ABS plastic on each side. | - | Each | 266 | - |
| 6 | Raising precast circular manhole cover and frame by taking out existing precast frame and cover, providing and fixing precast SFRC circular spacer of required height, re-fixing existing manhole cover frame and cover with cement sand mortar (1:3), including making good the damage, complete as directed by Engineer. | - | Each | 1,955 | - |
| 7 | Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete.
Earth, Sand, Lime, Morrum manure or sludge Add for each 1 Km beyond Ist Km (upto 5 Km.) | - | Cum | 3.3 | - |
| 8 | Carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete.
Earth, Sand, Lime, Morrum manure or sludge Add for each 1 Km beyond 5 Km (upto 10 Km.) | - | Cum | 3.15 | - |
| 9 | Granular Sub-Base with Close Graded Material (Table:- 400-1)
Plant Mix Method Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete. [MORTH specification: Clause 401]. By mechanical means.
For Grading-III Material | - | Cum | 845 | - |
| 10 | Wet Mix Macadam
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables
400.11 & 400.12 and MoRD Specification Clause 406. By Mechanical Means with 1 km lead | - | Cum | 1,147 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
Tenderdoc.pdf
Tender Documents • 0.85 MB
BOQ_1019244.xls
BOQ • 0.29 MB
corri10.pdf
PDF • 0.61 MB
Download all tender documents and submit your bid