REPAIRS TO BDY WALL/ PATH AND DRAIN FENCING OTM/ MD ACCN AT FOD, 12 DOGRA, 9 PARA, 1988 MED BTY, SAPPERS, CHIBBER ENCLAVE, 153 TA (JAT), 2CT AND INT DET UNDER AGE B/R-I AT GE (SOUTH) UDHAMPUR

Amount

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling and mass concrete all as specified and as directed.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in foundations filling and mass concrete complete, all as specified and directed.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted , built in cement mortar 1:4, complete all as specified and as directed.

Description all as per description of serial item No. 7.00 here in before but except stone.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses of granite or trap stone etc. and hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm complete all as specified and as directed.

Racking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought upto courses, built in cement mortar complete all as specified and as directed.

Flush pointing to Random Rubble stone uncoursed or brought upto courses Masonary in Cement Mortar 1:3 complete all as specified and as directed.

Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4, complete all as specified and as directed.

Description all as per item No. 12 above but except brick.

Providing precast cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) louvres and jallies, 45 to 50mm thick (measured solid) , including all mouldings but excluding frame Set in cement mortar 1:6, complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, all as specified and directed.

Mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165,complete all as specified and as directed.

Description all as per item No. 18 above but except steel.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 or Gde-E-165, complete all as specified and as directed.

Description all as per item No. 20 above but except steel.

Fixing only chain link fencing including lines wires, any size or type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only Chain link MS galvanisd fencing, any size or type n exc 4kg/sqm complete all as specified and as directed.

Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc all as specified. (Each line of wire to be measured)

Fixing only Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacing, straining and fixing to any standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc all as specified. (Each line of wire to be measured)

TMT mild steel bars, 6mm to 8mm dia, round bars as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long dia of shank 5 to 10mm, complete all as specified and as directed.

Preparation of newly plastered or unplastered surfaces of wall & applying two coats of cement base paint over a coat of chalk whitening, complete all as specified and as directed.

Preparation of old plastered or unplastered surfaces of wall & applying two coats of cement base paint white or tinted, complete all as specified and as directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zink chrome primer complete, complete all as specified and as directed.

Preparation of old steel and iron surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level), complete all as specified and as directed.

Dismantling Plain or corrugated steel/fibre glass sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete, all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridges, complete all as specified and directed.

10mm thick PVC Polycarbonate Fibre glass reinforced translucent corrugated sheeting (any colour) with two corrugations side lap fixed with coach screw and washer in roof, wall etc. with two 150-200mm side lap and aluminium strip on joints with rubber gasket/ self tapping screws complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as direceted.

Mild steel Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails guides for sliding doors, and vertical posts of pipes sections fixed with angle cleats or other connecting plates, Fe-410-W (Gde - E -250), complete all as specified and as directed.

100mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

Durastone heavy duty vitrified tiles of 10mm thick (square/ rectangular) coloured (area of each tile not exceeding 0.36 sqm) as in floors jointed in cement slurry and pointed in white or coloured cement to match the existing surfaces over and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed.

M/S ASHOK KUMAR PACHIALA (BID ID -3404628)

M/s AKHIL SHARMA (BID ID -3405719)

M/S R S Builders (BID ID -3404896)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3399211)

A K ENTERPRISES ENGINEER CONTRACTOR AND GEN ORDER SUPPLIERS (BID ID -3405143)

RAMAN CONSTRUCTION CO (BID ID -3405144)

M/S IMRAN MAJID (BID ID -3399665)