CIVIL WORK

Amount

R&R work of Division office building situated at 220 KV,S/S,BBMB, Dhulkote.

Scraping. (c) Cement plaster. Pb-CSR-Ref. No- 8.31(c) -L/R.

12.5 mm thick cement plaster 1:5. Pb-CSR-Ref. No- 15.10-T/R.

Extra for providing and mixing water proofing material in cement plaster work @ 1 kg per 50 kg of cement. Pb-CSR-Ref. No- 15.47-T/R.

Plastering on underside of ceiling 10mm thick cement plaster 1:4. Pb-CSR-Ref. No- 15.44-T/R.

Dismantling concrete. (e) Reinforced cement concrete. Pb-CSR-Ref. No- 8.6(e)-L/R.

Dismantling brick work tile, masonry or tile lining. (b) In cement. Pb-CSR-Ref. No- 8.5(b)-L/R.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No- 30.95-L/R.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No- 30.94-L/R.

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. Pb-CSR-Ref. No- 11.6-T/R.

115mm brick wall laid in cement, lime sand mortar 1:1:6 (one cement, one lime and Six sand) in super structure (up to 4 metre height) above plinth level. Pb-CSR-Ref. No- 11.22-T/R.

16mm thick cement plaster 1:5 in two coat work. Pb-CSR-Ref. No- 15.17-T/R.

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. (a) Size 75 mm x 75 mm. Pb-CSR-Ref. No- 30.85(a)-L/R.

Cement pointing 1:3 deep variety. Pb-CSR-Ref. No- 15.60-T/R

Nicking cement concrete surface (over 28 days old including preparation and laying slurry. Pb-CSR-Ref. No- 10.31-T/R

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm. Pb-CSR-Ref. No- 14.113(a)-T/R

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/ neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P.brass /stainless steel screws, all complete as per architectural drawings and the directions of E-I-C Charge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats. Pb-CSR-Ref. No- 17.45(a)-T/R

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required. Pb-CSR-Ref. No- 17.45(b)-T/R

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. Pb-CSR-Ref. No- 17.46(ii)-T/R

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). (ii) For shutter area above 0.50 sqm. Pb-CSR-Ref. No- 17.23(ii)-T/R

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (B) 250mm x 16mm. Pb-CSR-Ref. No- 17.49(B)-T/R

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of E-I-C. Pb-CSR-Ref. No- 17.48-T/R

Renewing glass panes with wooden fillets wherever necessary. (a) Glass panes weighing 8.44 Kg/sqm. Pb-CSR-Ref. No- 31.6(a)-T/R

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref. No- 14.125-T/R

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading. Pb-CSR-Ref. No- 14.72-T/R

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Pb-CSR-Ref. No- 16.17-T/R

LOADING AND UNLOADING: By Manual Means:-(A) Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal. Pb-CSR-Ref. No- 4.2-A-L/R

CARRIAGE: Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. Distance-0-15.0 km. Pb-CSR-Ref. No- 5.2(i)-L/R

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Pb-CSR-Ref. No- 9.8-T/R

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. Pb-CSR-Ref. No- 18.18-T/R

Removing wooden doors with chowkhats and refixing after fabricating in proper size including cutting, hoisting, welding etc. as per the site requirement and to the entire satisfaction of E-I-C. (N.S. Item)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537: Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (x) Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed). Pb-CSR-Ref. No- 34.12(x)-T/R

Repair of damaged RCC slab ceiling at various portions by concreting, plastering and reinforcing with chicken mesh and M.S flat 40x6mm strips laid @225mm c/c, jointed with ceiling by fasteners complete in all respects to the entire satisfaction of E-I-C. (N.S. Item)

Providing and applying injection grouting using cement slurry admixed with Fosroc Chemical Conplast WL or any other equivalent compound @ 300 ml/ Bag of cement through the uPVC nozzles ( 12mm dia uPVC/ Plastic Nozzles - 4" to 9" long @ 5 No: / Sqm of area) , provided into the cracks/ honeycombed areas using 140 PSI hand operated Grouting Pump under pressure till the refusal,doing final Cement slurry Grouting (after 28 Days), finally cutting & sealing of Nozzle. including all labour, supervision, tools and tackles and transportation etc. complete as per direction of E-I-C. Pb-CSR-Ref. No- 13.94-T/R

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. Pb-CSR-Ref. No- 6.6-L/R

Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge. (i) mixing by manual means. Pb-CSR-Ref. No- 10.8(b)(i)-T/R.

Supplying & laying dry brick ballast. Pb-CSR-Ref. No- 10.30-T/R

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth. Pb-CSR-Ref. No- 11.5-T/R

12.5mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded. (a) Vertical. Pb-CSR-Ref. No- 15.49(a)-T/R

Cement concrete 1:2:4 (a) With stone ballast or shingle. (i) mixing by manual means. Pb-CSR-Ref. No- 10.13(a)(i)-T/R

Providing and fixing tiled false ceiling at height upto 4 mtr. of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by E-I-C. Pb-CSR-Ref. No- 13.81-T/R

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. Pb-CSR-Ref. No- 16.18-T/R

White washing (Three coat). Pb-CSR-Ref. No- 16.3-T/R

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade. Pb-CSR-Ref. No- 16.7-T/R

Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. Pb-CSR-Ref. No- 16.13-T/R

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface. Pb-CSR-Ref. No- 16.11-T/R

Bharat Sahni Contractor

RELIABLE ENGINEERS