Extension and Renovation of Nanau Inspection House and Construction of 02 Nos. Type -1 Residential Building Near Nanau I.H. in District Aligarh

Amount

Dismantling of cement concrete or brick or granolithic floors including base concrete stacking of dismantled material as directed by Engineer-in-charge within a distance of 60 meters (200 feet)

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters (200 feet).

Dismantling jack arched or wooden beam and bargas roofs including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters (200 feet).

Earthwork in excavation in foundation in ordinary soil (Loam, Clay, or sand) including lift upto 1.50 M and lead upto 30.00 M including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the side of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30 M from the foundation trenches.

Providing and laying cement concrete in 1:4:8 (1 cement : 4 Coarse sand : 8 brick ballast 40 mm size) including supply of all material, labour, Tand P etc complete required for proper completion of work .

Brick work using M-150 bricks in 1:6 cement coarse sand mortar in foundation upto plinth including cost of all materials, labour and T and P etc complete required for proper completion of work.

Providing and laying D.P.C. 25 mm thick with cement concrete consisting of 1:1.5:3 (1 cement : 1.5 coarse sand :3 approved 5.6 mm graded stone grit) and including water proofing material as approved by Engineer-in-charge in the proportion as specified by manufacturer.

Painting on D.P.C. With two coats of air blown bitumen VG-10 grade @ 1.70 kg. Per sqm approximate including cost of fuel if any including cost of all materials, labour and T and P etc complete required for proper completion of work.

Antitermite treatment of the bottom and sides of excavation @ 5 litres per sqm of surface area with chemical emulsion with chlorpyriphos / Lindane E.C. 20% with 1% concentration including cost of all materials, labour and Tand P etc complete required for proper completion of work.

Earthwork in filling by power transported earth with a lead beyond 200 meter and upto 1.00 km including excavation, loading, unloading, manual compaction, dressing and all lifts complete excluding royality will be applicable from time to time on Govt. order.

Sand filling in Plinth including supply of sand from any distance at site of work and including watering, dressing etc. Complete required for proper completion of work.

Providing and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) including supply of all material, labour and T and P etc complete required for proper completion of work. In foundation and floors.

Brick work using M-150 bricks in 1:6 cement coarse sand mortar in superstructure including cost of all materials, labour and Tand P etc complete required for proper completion of work.

R.C.C. Work in beams, roofs, landing, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level upto floor five level, including cost of centring, shuttering, finishing and excluding reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal sige).

Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete required for proper completion of work.

Dismantling of existing old plaster and racking of joints depth upto 1cm including disposal of refuse as directed by engineer-in-charge within a distance of 60.00 meter

Providing and laying 12 mm thick cement plaster on brick work with cement mortar of mix 1:4 (1 cement : 4 coarse sand) upto 10 mtr height from ground level.

Providing and laying 6 mm thick cement plaster on ceiling including chipping of CC/RCC surface before plastering in cement mortar of mix 1:3 ( 1 cement :3 Fine sand ) (Not less than in 1.25 FM )

Cement concrete flooring (25 mm thick) in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) finished with a floting coat of neat cement, including cost of all material, labour and Tand P etc. Complete required for proper completion of work.

Providing and laying vitrified floor tiles without lean concrete 600x600 mm size with water absorption less than 0.08% and confirming to IS : 15622 of approved make, in all colours and shades laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand ), jointing with grey cement slurry @ 3.3 kg per sqm including grouting the joints with white cement and matching pigment etc complete.

Providing and laying different size of tiles in skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry and mathing pigment etc complete

Providing and fixing 18 mm thick Grenite (gang saw cut), mirror polished, premoulded, and prepolished, machine cut for kitchen plateform of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement :4 corse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high glossy finish etc complete.

Providing and fixing door and window frame made of C.P. teak wood wrought including simple moulding, straight work as in chaukhat including supply of all materials, labour, T and P etc required for proper completion of work.

Providing and fixing door frame made of Apollo hollow pipes size 130x65 mm thickness 2.5 mm double patam, including fixing hinges 100x3 mm ISI mark and 35x5 mm M.S. flat including fabrication, carriage upto site of work, one coat of steel primer, cost of all materials, labour and Tand P etc complete required for proper completion of work.

Providing and fixing window & ventilators frame made of Apollo hollow pipes size 75x65 mm thickness 2.2 mm double patam, including fixing hinges 100x3 mm ISI mark and 10 mm square M.S. bars including fabrication, carriage upto site of work, one coat of steel primer, cost of all materials, labour and T and P etc complete required for proper completion of work.

Providing and fixing window iron grill made of flat and square bars with fabrication including cost of all materials, labour, T and P etc complete required for proper completion of work

Providing and fixing 4 cm thick C.P. Teak wood fully panelled door shutters including supply and fixing of wooden cleats and stops and fittingbut excluding their supply of hinges, bolts, locks, handles,springs, and /or fitting and including painting with two coat of black japan on all iron fitting if necessary .

Supply and fixing of flush doors 35 mm thick, commercial quality confirming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fittings with necessary screw to be supplied departmently.

Providing and fixing 4 cm thick C.P. Teak wood part panelled and part glazed window shutters including supply and fixing of wooden cleats and stops and fittingbut excluding their supply of hinges, bolts, locks, handles,springs, and /or fitting and including painting with two coat of black japan on all iron fitting if necessary .

Supply and fixing 4 cm. Thick C.P. Teak wood fully glazed window shutters including supply and fixing of wooden cleats and stops and fittings but excluding supply of hinges, bolts, locks, handles, springs, and / or other fitting but excluding thier supply and including painting with two coats of Black Japan on all iron fittings (if necessary) and including fixing of glass panes (5 mm thick) with putty and brad. Fitting with necessary screw to be supplied separately).

Supply and fixing 4 cm. Thick C.P. Teak wood door and window shutters with panels of heavy quality galvanised iron wire gauge 2.5 mm or 2 mm or 1.5 mm mesh or any other size with necessary beading, including supply and fixing of wooden cleats and stops and fittings but excluding supply of hinges, bolts, locks, handles, springs, and / or other fitting but excluding thier supply and including painting with two coats of Black Japan on all iron fittings (if necessary) with necessary screw to be supplied separately).

Painting two coat over priming coat on steel or wood and other metal surface including cleaning the surface all dirt, dust and other foreign matter, sand papering and stopping including supply of all materials, labour, T and P etc complete required for proper completion of work . Paint shall be used as Asian or standard IS specification approved by Engineer-in-charge.

Finishing walls with white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered surface to prepare the surface even and smooth complete including cost of all material, labour, T and P etc. Complete required for proper completion of work.

Distempring two coat with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat cement primer of approved brand and manufacture such as Berger, J and N, Shalimar, Asain paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials, labour, T and P etc complete.

Providing and fixing IS : 12817 marked stainless steel butt hinges size 125x64x2.50 mm (heavy weight) with stainless screw etc complete

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC : 10 as per IS : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. Complete.

Providing and fixing aluminium tower bolts size 300x10 mm, ISI marked, anodised (anodic coating not less than grade AC : 10 as per IS : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. Complete.

Providing and fixing aluminium handles size 125 mm, ISI marked, anodised (anodic coating not less than grade AC : 10 as per IS : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. Complete.

Providing and fixing aluminium die cast body tubular type universal door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg. And door width 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc complete.

Providing and Fixing Main Gate made of M.S. Angle 50x50x6 mm, M.S. Bar 10 mm including one coat of primer, Fabrication, carriage upto site of work, cost of all materials, labour, T and P etc. Required for proper completion of work.

Providing and laying brick coba with M-100 class brick bat, 7.50 cm thick, with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreding cement slurry mixed with acrelic cement concrete water proofing compound filled gap of coba and top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth and top mashed false square 30 cm x30 cm and side wall parapet shall be monolythic plaster wall upto 30 cm height and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including supply of all materials, labour, T&P etc complete for proper of work.

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes

Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the wall etc. 32 mm nominal outer dia pipes

Providing and fixing ball valve (brass) 25 mm nominal bore of approved quality, High or low pressure, with plastic floats complete.

Providing and fixing uplasticised PVC connection pipe 45 cm length with brass unions.

Providing and fixing 15 mm nominal bore C.P. Brass long body bib cock of approved quality confirming to IS standard and weighing not less than 690 gms.

Providing and fixing 15 mm nominal bore C.P. Brass angle valve for basin mixer and geyser point of approved quality confirming to IS:8931.

Providing and fixing C.P. Brass shower rose with 15 or 20 mm inlet and 150 mm diameter

Providing and fixing C.P. Stainless steel grating of approved quality and colour 125 mm diameter.

Providing and fixing PVC pipe confirming to IS make working pressure 6 kg/sqcm including testing, labour, Tand P and all complete fittings. 110 mm diameter

Providing and fixing PVC pipe confirming to IS make working pressure 6 kg/sqcm including testing, labour, T and P and all complete fittings.160 mm diameter

Providing and fixing of UPVC S.W.R. Nahni trap confirming to IS-14735 size 100/75 mm, 100/90 mm self cleaning fixed in P.C.C. 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass Jali.

Supply and fixing of UPVC S.W.R. Plain bend confirming to IS- 14735 110 mm diameter.

Supply and fixing of UPVC S.W.R. Plain Tee confirming to IS- 14735 110x110x110 mm size.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weight not less than 88 gms.

Providing and fixing water closet squatting pan (Indian Type W.C. Pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. Flushing cistern, including flush pipe, with manually controlled device (handle lever) confirming to IS-7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. Flushing cistern, including flush pipe, with manually controlled device (handle lever) confirming to IS-7231 with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china Wash basin 630x450 mm size flat back with a single 15 mm C.P. brass pippar tap with C.I. Brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing white vitreous china flat back single half stall urinal of size 580x380x350 mm with 5 litre PVC automatic flushing cistern, with fittings, standard size C P brass flush pipe, spreaders with unions and clamps (all in C.P. Brass) with waste fittings as per IS : 2556 C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510x1040 mm bowl depth 250 mm as per IS : 13983 with C I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board 610x510 mm bowl depth 200 mm as per IS : 13983 with C I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with C P brass screws and washers complete.

Providing and fixing P.V.C. Waste pipe for sink and wash basin including P.V.C. Waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P. Brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing C.P. Brass health fuccet of standard design and of approved make including flexible tube upto 1.00 mtr long etc. Complete. 15 mm nomonal dia

Providing and fixing C.P. Brass /S.S. Jet with flexible tube upto 1 mtr long with S.S. Triangular plate for European type W.C. 8 mm dia.

Wiring point for light with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, modular type switch and ceiling rose / angle / batten holder etc complete.

Wiring point for two way light with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, modular type switch & ceiling rose / angle / batten holder etc complete.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, modular type switch and ceiling rose complete.

Wiring point for plug with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, modular type switch & socket etc complete.

Wiring point for H.P.M.V. / Sodium Vapour lamp with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, 15 A modular type switch etc complete.

Wiring point for call bell with 1.5 sq mm FRLSH PVC insulated muitistrand single core copper conducter cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, GP box, modular type bell push or two pin socket etc complete.

Supply and fixing of 200 Amp. Four pole mouled case type on load change over switch with enclosure including the cost of labour, Tand P and material required for proper completion of the work as per direction and satisfaction of Engineer-in-charge.

Supply & Fixing and making connection of 63 Amp. 4 pole 30 mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction of Engineer-in-charge.

Supply & Fixing double light wall bracket fixed on matching MDFEG board base etc. Complete in all respect.

Supplying and burying of 600 mm x 600 mm x 3 mm copper plate vertically for earthing with its top at least 3 meter below ground level with 20 mm dia G.I. Pipe and funnel for watering and two earthing lead of 8 SWG copper wire in 15 mm dia G.I. Pipe to switch board ( from appron to switch board the cost of G.I. pipe and copper wire will be extra ) 30 cm square C.I. Frame with hinged cover masonry housing alternate layer of charcoal/coke and salt at least 150 mm thick alround etc. complete in all respect.

Supply and fixing of two number 8 SWG copper wire in 15 mm dia G.I. Pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, Tand P other material required for proper completion of work as directed at site.

Supply and fixing of 40 Amp to 63 Amp. SP MCB (10KA) C curve. CAT A

Supply and fixing surface/flush mounting 12 ways SPN Distribution Board with additional metal door without MCB complete in all respectas directed by Engineer-in-charge.

Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as I.E. Rules.

Supply and fixing of call bell of approved make on polished MDFEG / Teak ply board including making connection etc. Complete in all respect.

Supply and fixing of 2 ways bell indicator on polished MDFEG / Teak ply board including making connection etc. Complete in all respect.

Supply and fixing of power plug with 20 Amp. / 250 volt flush type modular switch and 5 pin 20 Amp. / 250 volt flush type universal modular socket switch on concealed M.S. Box including supply of all material, labour, Tand P etc. Complete required for proper completion of work.

Supply and fixing of CO2 type fire extinguisher 6.5 kg. Capacity ( ISI marked IS : 2878 and TAC approved ) complete with initial charge and wall bucket along with including all material, labour for completion of work.

Supply and fixing hexagonal / round G.P. Fan box of approved make made of 1.0 mm thick ISI marked G.P. Sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box. Holes should be semi shuttered type with 0.5 mm G.P. Sheet made upper and lower cover duly screw fitted with 300 mm round zink coated 12 mm MS bar and brand name should be embossed. Fixing with wiring conduit laid in RCC roof before concreting along with supply of all material, labour, T and P etc. required for proper completion of work.

Supply and fixing G.P. boxes for concealed LED / CFL lamps 335 mm wide x 63.5 mm deep of approved make made of 1.0 mm thick ISI marked G.P. Sheet spot welded four to eight holes of 25.4 mm for pipe entry of the box. Holes should be semi shuttered type with 0.5 mm G.P. Sheet made upper and lower cover duly screw fitted with 300 mm round zink coated 12 mm MS bar & brand name should be embossed. Fixing with wiring conduit laid in RCC roof before concreting along with supply of all material, labour, T and P etc. required for proper completion of work.

Supply and fixing of electronic fan regulator (modular) 120 - 280 V. ISI marked, on the existing switch board including making connection, required material, labour, Tand P etc. For proper completion of work.

M/S SUBHASH GAUTAM

M/s CHANDRA PAL SINGH