Wall panelling including polishing and furnishing of District and Session Court Judge Chamber

Amount

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

100x85x5.5 mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

Providing and fixing bright finished brass handles with screws etc. complete:

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:

One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade:

Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

Thickness above 10 mm up to 25 mm

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions :

30 cm length

15 mm nominal bore

45 cm length

15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 4.0 mm thickness

Providing and fixing in wall lining plywood (IS: 710) with necessary fixing arrangement and screws etc. Complete:

12mm thick plywood

Providing wood work in frames of false ceiling, partition etc. sawn and put up in position :

Superior Hard Wood Cat - II (A)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Ist class Paduak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Ist class Paduak wood

35 mm thick shutters

Melamine polishing (PU) on woodwork, make surface with grinding machine till the wood with natural colour and smoothening the surface with sand paper of different size and applying one coat filler and rubbing with water paper, after drying filler for 6 to 8 hours applying two coats sealer and rubbing with water paper, applying two coat of Melamine Matt Finish Polish etc. complete :

Providing and fixing pillar cock of aprroved quality. (Jaquar or equivalent make code No. (Code No.Con -011 KN).

Applying anti termite coat of Dr. Fixit in the internal portion of wall panelling One or more coats on old work.

Providing and fixing veneer plywood BURMA TEAK 4 mm thick of superior quality including fixing with necessary screw etc. Complete as per the direction of Engineer – in – charge.(minimum cost range of BURMA TEAK 4 mm thick veneer plywood shall be Rs. 850/sqm).

Cleaning tiles with diluted hydrochloric acid including removing grout from tiles joints etc. complete as per the direction of Engineer-in-charge.

Providing and fixing Name plate/ made of 4mm thick form sheet including sticker of size 1" x 1" .