| 1 | Executive Table, Main desk with Executive Return Unit, Godrej make, Grandeur model or equivalent | Supplying and placing of Main Table with size of 2400 x 900 x 740 . MAIN WORKTOP Made of 43mm Thick plus or minus 1mm , combination of MDF and particle board with top veneer facecoated with clear lacquer. LEATHER PAD, Made of 18mm Thick plus or minus 1mm , MDF with Leatherette wrapped around top surface. DRAWER UNIT - Top panel and drawer unit modesty panel is made of 43mm Thick plus or minus 1mm, combination of MDF and particle board with top veneer face coated with clear lacquer. OPEN STORAGE UNIT _Top panel and open storage unit modesty panel is made of 43mm Thick plus or minus 1mm, combination of MDF and particle board with top veneer face coated with clear lacquer and other specification as per specification document. MODESTY_Made of 18mm Thick Prelaminated twin board of E1 to P2 grade and approved shade confirming to IS as mentioned in the specification document. Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted with aluminum trims. UNDERSTRUCTURE _Made of 18mm Thick Prelaminated twin board of E1 to P2 grade and approved shade confirming to IS as mentioned in the specification docuement. Edge banded with matching 2 mm thick PVC lipping. Door is fixed with soft closing hinges and handle is provided for ease of opening. Fitted with good quality lock. ACCESS FLAP WITH POWER BOX_Soft closing access flap with power box contains 3 Universal Sockets, 2 USB powerpoints, 1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6 connections. Executive Return Unit_ ERU of 200 x 450 x 610 size and as specified in the specification document. The ERU shall be matching and assemblable to the main table. Door is fixed with soft closing hinges and handle is provided for ease of opening. Secured with side central lock. All the above mentioned items shall comply with the remaining specifications strictly as furnished in the specification document. | 1 | Each | buycon230.aai.tn | 60 |
| 2 | Back unit body with glass Door, Godrej Make Grandeur model or equivalent | Supplying and placing in position Back unit Body having measurement of 2400 x 470 x 1226. CONSTRUCTION AND MATERIAL-Made from combination of side panel 0.5mm CRCA, Bottom panel 0.5mm CRCA, Backpanel 0.5mm CRCA, Top Bottom stiffener 1.2mm CRCA and End Cover 0.6mm CRCA. Shelves are 12 bend panel made of 0.7mm Thick CRCA, D Grade, IS-513. Storage body is powder coated with Epoxy Polyester to the thickness of 50 microns, plus or minus 10 microns. VENEER DOOR-Made of 12mm Thick plus or minus 1mm, MDF with 3.5mm veneer both side and face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door is provided with soft closing hinge. Handle is also provided for ease of opening. Storage is secured with 3 way cam lock. GLASS DOOR Made from the combination of aluminium alloy 63400 extrusion and 4mm clear toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy Polyester to the thickness of 50 microns plus or minus 10 micron. Handle is provided for ease ofopening. RH Glass Door is provided with 3 way cam lock for security. | 1 | Each | buycon230.aai.tn | 60 |
| 3 | Executive chair, high back, Godrej make Emerald model or equivalent | Supplying and placing of High Back Chair. SEAT ASSEMBLY The seat is made up of 12mm thick MR Grade plywood, layered with pocket spring coms, super soft foam of 32 kg per m3 density and edging foam of 28 kg per m3 dormity. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. BACK ASSEMBLY- The back assembly is made up of a combination of pinewood members, 12mm thick MR Grade plywood and 2mm thick cardboard, layered with slab stock foam of 28 kg or m3 density. A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. ARMPAD ASSEMBLY -The armpad assembly is made up of 6mm thick MR Grade plywood fixed with MS powder-coated brackets, Inyered with foam of 60 kg or m3 density, A 200GSM soft touch fibre fill sheet is placed over foam sub-assembly and upholstered in natural leather or leatherette. CENTER TILT WITH MULTI POSITION LOCK MECHANISM The mechanism is designed with the following features 360 revolving type, 3 position locking, Till tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT The Class 4 pneumatic height adjustment has stroke of 100.3 cm. PEDESTAL ASSEMBLY The pedestal is made of high-pressure die-cast polished aluminum with a buffed outside surface and black color coated internal surface, it is fitted with 5 castors and has a pitch center diameter of 67.510.5 cm -77.5 10 cm with castors. TWIN WHEEL CASTORS The twin wheel castors are injection moulded in Black polyamide. WIDTH 69.0cm, DEPTH 77.8cm, HEIGHT 123.5 to 133.5cm, SEAT HEIGHT - 49.5 to 59.5 cm. | 1 | Each | buycon230.aai.tn | 60 |
| 4 | Visitors chairs Godrej make, Marvel model or equivalent | Supplying and placing of Visitor Chair. SEAT or BACK ASSEMBLY The Cushioned seat should be made of Injection molded Plastic outer and inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience Polyurethane foam of Density 45 plus or minus 2 kg per m3 and hardness load 16 plus or minus 2 kgf as per IS-7888 for 25percentage compression. The Cushioned back should be made of PU Foam with insitu molded MS ERW Round Tube of size 1.9 plus or minus 0.03cm x 0.16 equal to 0.0128cm. It upholstered with Leatherette. Seat SIZE 47.0 cm. W x 48.0 cm D. BACK SIZE 47.7 cm W x 60.1 cm D. Visitor TUBULAR FRAME The tubular frame should be cantilever type and made of no 2.54 plus or minus 0.03 cm X 0.02 plus or minus 0.016cm thick SS 202 tube. The back should be connected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair, Seat Height -44.8cm, Height -98.2cm, Width and Depth of Chair as measured from base Width 60.9 cm and Depth 64.2 cm. | 22 | Each | buycon230.aai.tn | 60 |
| 5 | Three seater Sofa, office range, Godrej Make, Pisa model or equivalent | Supplying and placing of three seater sofa, ergonomic back support, soft touch fine finish, durable fabric or equivalent. SEAT FOAM - The seat is made up of PU foam in Density 28 plus or minus 2 kg per cu.mtr with an additional top layer of supersoft PU foam in Density 32 plus or minus 2 kg per cu, upholstered with fabric or leatherette. BACK FOAM - The back is made up of PU foam in Density 28 plus or minus 2 kg per cu. mtr with two additional top layer of supersoft foam of density 32 plus or minus 2 kg per cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE - Understructure is made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood- moisture resistance and termite proof as per IS-303 and pinewood of cross sections devoid of major knots and surface defects. 6 nos per seat and 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY It is a welded Assembly made in Stainless steel, grade SS 202, tube and plate with plastic endcap.Width - 206.0 CM. Depth- 90.5 CM. Height - 85.5 CM. Seat Height - 45.0 CM. | 2 | Each | buycon230.aai.tn | 60 |
| 6 | Single seater Sofa, office range, Godrej Make, Pisa model or equivalent | Supplying and placing of one seater sofa ergonomic back support, soft touch fine finish, durable fabric or equivalent. SEAT FOAM - The seat is made up of PU foam in Density 28 plus per minus 2 kg or cu.mtr with an additional top layer of supersoft PU foam in Density 32 plus or minus 2 kg or cu, upholstered with fabric or leatherette. BACK FOAM - The back is made up of PU foam in Density 28 plus or minus 2 kg per cu. mtr with two additional top layer of supersoft foam of density 32 plus or minus 2 kg per cu. mtr, upholstered with fabric or leatherette. UNDERSTRUCTRE - Understructure is made up of 1.2 plus or minus 0.1 cm. thick hot pressed plywood , moisture resistance and termite proof as per IS-303, and pinewood of cross sections devoid of major knots and surface defects. 6 nos per seat and 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. LEG ASSEMBLY - It is a welded Assembly made in Stainless steel, grade SS 202, tube and plate with plastic endcap. Width - 86.0 CM. Depth - 90.5 CM. Height - 85.5 CM. Seat Height - 45.0 CM. | 4 | Each | buycon230.aai.tn | 60 |
| 7 | Executive table, Main Desk with Executive Return Unit and pedastal, Godrej Maestro model or equivalent | Supplying and placing in position Main table of the following specifications. Its size shall be of 1800 Width mm x 900 Depth mm x 750 Height mm.The table top shall be 25 mm thick Melamine faced chipboard also there should be 30 mm Medium density fiberboard black pad.The modesty panel shall be of 18 mm thick Melamine faced chipboard.The leg of the main desk shall be of 25 mm MFC plus 30 mm MDF right and left pad. The main table should be of duck noise profile edge in order to enhance the workspace aesthetics. ERU Supplying and placing in position ERU of the following specifications. It size shall be of 1200 Width mm x 600 Depth mm x 730 Height mm. The top panel shall be 25 mm thick Melamine faced chipboard .The Modesty panel shall be 18 mm thick MFC coated. The leg of the return desk shall be 25 mm thick Melamine faced chipboard plus the right and left pad should be 30 mm thick medium density fiber coated. Pedastal- Supplying and placing in position pedestal of the following specifications. Its size shall be of 400 Width mm x 560 Depth mm x 560 Height mm. The top panel shall be 25 mm thick Melamine faced chipboard plus all the other panels shall be 18 mm thick coated with Melamine faced chipboard. In Mobile pedestal all other panels shall be of 18 mm thick Melamine faced chipboard. In Mobile pedestal lock and Castors shall be Provided. The handle shall be of Metal. | 1 | Each | buycon230.aai.tn | 60 |
| 8 | Executive chair, high back, Godrej make, Marvel Model model or equivalent | Supplying and placing of High Back Chair. SEAT and BACK ASSEMBLY. The Cushioned seat should be made of Injection molded Plastic outer and inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience Polyurethane foam of Density 45 plus or minus 2 kg per m3 and hardness load 16 plus or minus 2 kgf as per IS 7888 for 25percentage compression. The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9 plus or minus 0.03cm x 0.16 plus equal to 0.0128cm. Upholstered with Leatherette | 1 | Each | buycon230.aai.tn | 60 |
| 9 | Executive table, Godrej make Finnesse Table, 4020 Model or equivalent | Supplying and placing in position Main table of the following specifications. Its size shall be 1200 Width mm x 600 Depth mm x 740 Height mm . Table top shall be 25 mm thick plain particle board Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate. Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board. PPB Clad with 1.0 mm thick decorative laminate on both sides. Edge Sealed with 2 mm thick PVC beading. | 1 | Each | buycon230.aai.tn | 60 |
| 10 | Executive chair, Godrej make, Oxbo High Back Model or equivalent | Supplying and placing of High Back Chair. SEAT ASSEMBLY The seat assembly should be made up of 1.2 plus or minus 0.1cm. thick hot pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. SEAT SIZE 47.0 cm. W x 48.0 cm D. BACK ASSEMBLY- The back asembly should be made of powder coated, OFT 40 to 60 microns, tubular frame of 0 2.54 plus or minus 0.03cm. x 0.2 plus or minus 0.016cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn. BACK SIZE 46.5 cm W x 70.5 cm H. HIGH RESILIENCE POLYURETHANE FOAM. The HR polyurethane foam should be moulded with density 45 plus or minus 2 kg or m3 and hardness load 16 plus or minus 2 kg for 25percentage compression. ARMRESTS The one piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE TILT mechanism, The mechanism should be designed with the following features. 360 degree revolving type, 17 degree plus or minus 2degree maximum tilt on pivot at centre, Upright position locking, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT, The pneumatic height adjustment has an adjustment stroke of 11.0 plus or minus 0.3cm. TELESCOPIC BELLOW ASSY. The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. PEDESTAL ASSEMBLY The pedestal should be injection moulded in black 33percentage glass filled Nylon 66 and fitted with 5 nos twin wheel castors. The pedestal should be 66.3 plus or minus 0.5cm. pitch center dia 76.3 plus or minus 1.0cm with castors. TWIN WHEEL CASTORS. The twin wheel castors should be injection moulded in black nylon. Overall Dimensions of Chair, Seat Height min 43.3 to max 54.3cm, Height min 99.5 to max 110.5cm. Width and Depth of Chair as measured from pedestal Width 76.3 cm and Depth 76.3 cm. | 1 | Each | buycon230.aai.tn | 60 |
