Repair and Maintanance of 7.5 HP Non Clock Motor, Feed pump and 30HP Non Clock motor in Sewage Treatment Plant in Bodinayakanur Municipality.

Amount

Removal of 7.5 HP non clock motor into STP by using Chain Block, required man power and Conveying of motor into leath using motor vehicle and also unloading the pump required Labour and machinery etc, complete.

Rewinding Charge of 7.5 HP Motor including fixing of below material into the stator body double coated copper wire with parallel series connction and also using wooden stick, high temperature class fibe sheet and tape and deduction of old coil cost required Labour and machinery etc, complete.

Supply and delivery of 7.5 HP Motor Mechanical Shield Top including of conveyance charges etc, complete.

Supply and delivery of 7.5 HP Motor Mechanical Shield Bottom including of conveyance charges etc, complete.

Supply and delivery of 7.5 HP Motor Bearing Bottom including of conveyance charges etc, complete.

Supply and delivery of 7.5 HP Motor Bearing Top including of conveyance charges etc, complete.

Repair and Rectification of top bearing holding cup including of lathe charges, sleeve, drilling, threading work, conveyance, all laboure charges etc, complete.

Removal of 7.5HP Body SS Stud Bold using Welding including of lathe charges, sleeve, drilling, threading work, conveyance, all laboure charges etc, complete.

Supply and Delivery of 20×40 Oil with cost of Material etc, complete.

Supply and Delivery of SS Stud Bolt with cost of Material etc, complete.

Supply and delivery of O Rings set- Nitrile Rubber including of conveyance charges etc, complete.

Rotary Alignment for 7.5 HP Motor including of all laboure, lathe charge etc, complete.

Repair and Rectification of Motor shaft including of lathe charges, Welding, drilling, stoning work, conveyance, all laboure charges etc, complete.

7.5 HP Non clock motor service Charge and Panel service charge including Fixing of Bearing, Refilling 20×40 oil, Fixing of Motor body using Packing Past with required Labour etc,complete.

Supply and delivery of Motor Temperature Sensor including of conveyance charges etc, complete.

Supply and delivery of Motor Oil Pressure Sensor including of conveyance charges etc, complete.

Supply and delivery of 7.5 HP Motor Terminal Board set including of conveyance charges etc, complete.

Supply and delivery of 2.5 Sqmm Copper Washer leg including of conveyance charges etc, complete.

Supply and delivery of 7.5 HP Motor Cable Entry Kit including of conveyance charges etc, complete.

Supply and Delivery of Packing Paste with cost of Material etc, complete.

Fixing of 7.5 HP Non clock motor from the Recycle well by using Chain Block, required man power and Conveying of Motor into stp using motor vehicle and also unloading the motor required Labour and machinery etc, complete.

Removing of Feed Pump including Labour Charge and conveyance etc, complete.

Supply and delivery of Stator (Nitrile) for BDA 108 Pump including of all conveyance etc, complete.

Supply and delivery of Rotor (SS 410 HCP) for BDA 108 Pump including of all conveyance etc, complete.

Supply and delivery of Coupling Rod Pin (Tool Steel HCP) for BDA 108 Pump including of all conveyance etc, complete.

Supply and delivery of Coupling Rod Bush (Tool Steel HCP) for BDA 108 Pump including of all conveyance etc, complete.

Supply and delivery of O Ring (Nitrile) for BDA 108 Pump including of all conveyance etc, complete.

Supply and delivery of Boot Seal (Nitrile) for BDA 108 Pump including of all conveyance etc, complete.

Lathe Work and Service Charge including of all conveyance and laboure etc, complete.

Fixing of Feed Pump including Labour Charge equipment etc, complete.

Removal of 30 HP non clock motor into STP by using Chain Block, required man power and Conveying of motor into leath using motor vehicle and also unloading the pump required Labour and machinery etc, complete.

Rewinding Charge of 30 HP Motor including fixing of below material into the stator body double coated copper wire with parallel series connction and also using wooden stick, high temperature class fibe sheet and tape and deduction of old coil cost required Labour and machinery etc, complete.

Supply and delivery of 30 HP Motor Mechanical Shield Top including of conveyance charges etc, complete.

Supply and delivery of 30 HP Motor Mechanical Shield Bottom including of conveyance charges etc, complete.

Supply and delivery of 30 HP Motor Bearing Bottom and Top including of conveyance charges etc, complete.

Repair and Rectification of 30 HP Top bearing holding cup including of lathe charges, sleeve, drilling, threading work, conveyance, all laboure charges etc, complete.

Removal of 30HP Body SS Stud Bold using Welding including of lathe charges, sleeve, drilling, threading work, conveyance, all laboure charges etc, complete.

Supply and Delivery of SS Stud Bolt with cost of Material etc, complete.

Supply and delivery of 30HP O Rings set- Nitrile Rubber including of conveyance charges etc, complete.

Rotary Alignment for 30 HP Motor including of all laboure, lathe charge etc, complete.

Repair and Rectification of 30HP Motor shaft including of lathe charges, Welding, drilling, stoning work, conveyance, all laboure charges etc, complete.

30 HP Non clock motor service Charge and Panel service charge including Fixing of Bearing, Refilling 20×40 oil, Fixing of Motor body using Packing Past with required Labour etc,complete.

Supply and delivery of 30HP Motor Terminal Board set including of conveyance charges etc, complete.

Supply and delivery of 6 Sqmm Copper Washer leg including of conveyance charges etc, complete.

Supply and delivery of 30 HP Motor Cable Entry Kit including of conveyance charges etc, complete.

Fixing of 30 HP Non clock motor from the Recycle well by using Chain Block, required man power and Conveying of Motor into stp using motor vehicle and also unloading the motor required Labour and machinery etc, complete.

VAIGAI HYDRAULIC ENGINEERING (BID ID -1410990)