Illumination of Regina Martyrum church at Assolna in 35-Velim Constituency (MLA-LAD Scheme)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required.

4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm casing )

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4 Core 4 sq.mm

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

3 Core 4 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.

In rocky strata

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required

4 x 4 Sq. mm.

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)

4 way double door Cat B

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.

TPN, Cat B

SP, Cat B

Supplying and fixing of following sizes of PVC casing caping alongwith accessories on surface as required.

75mm casing capping

Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required

S.I.T.C. of 100W LED floodlight luminaire, with toughened glass, efficient high power LEDs and secondary lenses, integral driver, 10KV SPD in pressure die cast metallic/PDC housing, having IP-65/66 protection, including connections complete as required of makes : Havells, model- JETA IRIS FL 100w LED 757 APWBLTG // Bajaj, model- Praze F120L WHNB-A5 TG SD // Philps Model Fieldstar BVP282LEd120CWFGSY5WB 100W V1 equivalent with similar specs in Crompton / Wipro.

S.I.T.C. of 200W LED floodlight luminaire, with toughened glass, integral driver, 10KV SPD in pressure die cast housing, having IP-66 protection complete as required of makes Crompton, model- Spectacle Pro ,CFS-511-200-57-60D-HL2-LM-NSG // Bajaj Model PRAZE F240LWHNBA5TGSD // jaguar Model OFL-GRY-LLDSLS200XCor equivalent with similar specs in Philips/Wipro.

S.I.T.C. of 9W/12W LED spike light Landscape luminaire, in die cast housing, having IP-65 protection complete as required of makes : Havells, model- LYCUSSSPS9WLED730 PSYMBOTG // Bajaj Model SPYKZBGSBL 9WLEDWW // Jaguar Model SLASH OSK-BLK-LSPK05R112SW or equivalent with similar specs in Philips/Wipro

S.I.T.C. of LED light Strip with evenly spaced LEDs to offer uniform illumination, with driver and superior adhesive for easy installation with CCT 3000k of Make philips Model pro Glow Nxt, 55W // make Bajaj 25W strip Light BPLS25W LED Strip IP65 WW // Jaguar strip light WW, 40W, IP65 Model STI-WHt-LSTP04X008XW

S.I.T.C. of LED Post Top Light fitting having IP-65 protection complete as required of make Crompton Model Heritage LPTH-20-WW , Make Bajaj Model Arian BGCTN 25W LEDWW, Havells RUBYPT25WLED757 SSYMTOPC.

S.I.T.C. of façade LED light Fitting with toughened glass ,having pressure die cast housing with integral driver, having IP-65 protection,beam angle 80 deg, 3000k CCT ,36W of Make: Pasolite, Model POSL 05 . The fitting should be painted with 2 or 3 coats of white colour enamel paint so that it matches with the colour of the church facade and light fitting to be installed at a height of about 15-20 mtr ground level by using telescopic ladder/ crane and necessary safety measures for electrician.

S.I.T.C. of Wall washer LED light Fitting , having pressure die cast housing with integral driver, having IP-65 protection,3000k CCT ,10W of Make: Philips, Model 800038 Tetris . The fitting should be painted with 2 or 3 coats of white colour enamel paint so that it matches with the colour of the church facade and light fitting to be installed at a height of about 15-20 mtr ground level by using telescopic ladder/ crane and necessary safety measures for electrician.

Supply and fixing KF thermoplastic junction box with PE Inlay of size 130 mm x 130 mm x77 mm having IP 66/67 protection with 4/5 pole copper connectors and metric knockout for 4core cable entry upto 1.5 - 4.0sqmm size including including connections and provision for fixing 5A SP MCB as required.Make: Hensel (KF 0604 U) or equivalent model superseding at the time of execution.

Supply & Installation of M.S. Stand fabricated out of 35x35x5mm M.S. angle and 25x5mm Ms flat with necessary size holes , painted with one coat of primer and one coat of black enamel paint , suitable to mount 100W floodlight fitting on the roof of Church hall .

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC cover having locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size not less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).

In rocky strata

Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt).

Providing and fixing 4 mm dia copper wire on surface or in recess for loop earthing . as required

Supply, installation & commissioning of outdoor type feeder Panel made of 14swg CRCA sheet duly powder coated suitable for operationon 3 phase, 4 wire 440 volts 50Hz system. The panel should be flush front ,compartmentalized, to allow cable entry from bottom, dust & vermin proof, , complete with interconnections of proper size of wires etc. The panels will have 32A TPN MCB --1 no 32A TP Contactor Make L&T -- 1 no. Digital Timer 24Hr Make L&T --1no. Control Fuse Link -- 1no. TP MCb 32A -- 1no. SP MCb 10A -- 9 nos. 4Module PVC Box and plate -- 2nos. 16A switch -- 6 nos.

Please Enable Macros to View BoQ information