CWE/P-45/2019-20 SPECIAL REPAIR TO ORS MD ACCN BLDG NO. P-121 (01 TO 04 QTR ) AND ORS MD ACCN BLDG NO. P-197 (1 TO 6 QTR) AT JANGLOTE UNDER GE BASOLI

Amount

Taking down steel window and ventilator with wire mesh/glazed shutter (without taking off shutters from the frames) area not exceeding 1.5 Sqm each and removing from site complete all as specified.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4.0 sqm each and removing from site complete all as specified.

Taking down shutters of any description exceeding 1sqm and not exceeding 2 sqm each, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description and in any position not other wise specifically provided for complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm and rubbish off the materials to a distance n.exc. 100m complete all as specified

Dismantling water tank exc 250 but n.exc. 500 Ltr capacity from roof slab complete all as specified

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

Taking down soil pipe/waste pipes (any size or pattern) , including all fitting including cleaning or refixing or removal to store .

M& L Form work to soffits to chhajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified and directed.

M&L RCC nominal mix 1:2:4, type, B-1 (using 20mm graded crushed stone aggregate), as in chhajjas, troughs and similar items, complete all as specified.

M & L precast RCC 1:2:4, type B1 (using 20mm graded aggregate) as in cover slabs for Man holes etc set in cement mortar 1:6 complete all as specified and as directed

M & L TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

M & L TMT bars, 5mm dia and over upto incl 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L 15mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces & finishing the surface even and smooth without using extra cement mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified.

Supply only Integral water proofing compound , complete all as specified.

M&L rendering 05 mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on concrete surfaces in cement mortar 1:4 for receiving skirting/dado, complete all as specified and directed.

M & L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base complete all as specified and directed

M&L screed bed 15 mm thick in cement mortar 1:6 for laying floor finishes , complete all as specified and directed.

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified.

M & L Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified.

M & L Joint free coloured/ printed glazed ceramic tiles (first quality) of size 300 x 450 x 7mm thick on vertical surfaces such as dado with highlighter etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified.

M & L 75mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M & L Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

M & L mild steel FI as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified .

Supply and fixing factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

M&L Plain framed factory made 35mm thick shutter of 2nd class hard wood rail & style (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12 mm veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated all as specified.

M&L factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24(a) kiln seasoned and pressure treated all as specified.

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 105 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

M&L 1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after taaring of hollow portion of frame complete all as specified and directed.

M&L Steel window/ Ventilator factory made out of M S tubular moulded frame of 16 gauge suitable for double shutter (wire gauged shutter & glass glazed shutter) with side hung shutter including projecting type hinges non friction with 3.00 mm thick 100mm long handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long welded on 3.00 mm thick MS plate to each window shutter and incl top hung vent shutter at top of glazed and wire gauge shutter welded including hold fast and including one coat of red oxide primer all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2. Note: (i) Cutting holes for hold fast making good in cement mortar 1:3 and PCC 1:2:4, type B-1 shall be included in the quoted rates. (ii) Grills/Gaurd bar shall be measured and paid separetely

S&F steel ventilators (factory made) made out of M S tubular moulded frame of 16 gauge with top hung shutter , including projecting type hinges with steel handle and steel peg complete bottom fixed and top openable over one coat of red oxide primer complete all as specified and directed.

S & F Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified.

M&L for welding in repairs, not exceeding 2.5 cm in length , thickness of metal to be welded N. exc. 6 mm complete all as specified.

M&L Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified.

M&L 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

M&L 3.00 mm thick figured , pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

M & L Mild steel butt hinges, medium weight, cold rolled (ISI marked),100mm long , complete all as specified.

M & L Mild steel butt hinges, medium weight, cold rolled (ISI marked), 75mm long , complete all as specified.

Supply and fxing Mild steel barrel tower bolt ISI marked, stove enamelled black, with bright bolt of 150mm long, complete all as specified.

Supply and fxing Aluminium anodised, barrel tower bolts of extruded section of size 150mm ISI marked and fixed, complete all as specified and directed.

Supply and fxing Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, all as specified.

Supply and fxing , 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate (ISI marked) complete including all neccesary welding if required all as specified.

Supply and fxing Mild steel pressed handle ISI marked, oval type stove enamelled, black of size 150 mm, complete all as specified.

M & L Aluminium alloy handles (ISI marked), cast type, anodised of size 150mm and fixed, complete all as specified and directed.

S & F Rotational moulded polythene water storage tank, coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug,complete all as specified and directed.

S & F 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

S & F Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore complete all as specified and directed.

M&L 15 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittingsand fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturded surfaces complete in all respect in cement mortar 1:4, complete all as specified.

M&L 20 mm bore steel water tubing with screwed socket joints, medium grade galvanized with all fittingsand fixing complete with clips, wall hooks etc to wall and ceiling or laid in flloor including necessary chasing and cutting in brick/concrete surfaces and making good the disturded surfaces complete in all respect in cement mortar 1:4, complete all as specified.

M&L 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete masnory surfaces mixed with water proofing compound (WPC shall be measured and paid separately) complete all as specified.

M & L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, mass concrete etc all as specified and directed by Engr –in Charge

S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170gm),complete all as specified

Supply and fxing in repairs, Vitreous china squatting pan (Orissa pattern) size 580 x 450 mm, white, with integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe of 32mm dia and syphonage pipe etc, and complete, all as specified and as directed.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints , complete all as specified.

S & F in repairs 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), complete all as specified.

Supply and fixing in repairs stop valve of cast copper alloy (ISI marked), screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

S & F in repairs 15mm bore Stop valve cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure screwed both ends for iron pipes or for union, complete all as specified.

S & F in repairs15mm bore swivel shower of PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) fixed in reapairs, complete all as specified and directed.

M&L PVC connection 15mm size with PTMT nuts on both ends of length 450mm , complete all as specified.

S & F PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint fixed to walls complete all as specified and directed.

S & F PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint fixed to walls complete all as specified and directed.

S & F 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S & F in repairs PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified.

S & F 75mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.

S & F in repairs 110 mm bore PVC(SWR) branch piece, single (double Y) equal or un equal bore fixed in repair, complete all as specified and directed.

S & F in repairs 75 mm bore PVC(SWR) branch piece, single (double Y) equal or un equal bore fixed in repair, complete all as specified and directed.

S & F in repairs PVC (SWR) vent cowl for 110mm dia , all as specified.

S & F in repairs PVC (SWR) vent cowl for 75mm dia , all as specified.

M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope 1:40 and thickness 50mm and finished the surfaces even and fair wihtout unsing extra cement complete all as specified and directed.

M & L for roof treatment with the following specification (a) Removal of existing old treatment of any type including PCC padding and roughening surfaces of old concrete by picking, sweeping, clean and washing down with water (b) Applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 Kg per sqm (c) Apply a layer of APP (Atactic Polypropylene Polymer) modified membrane not less than 3 mm(minimum) weighting not less than 3.5 kg/sqm reinforced with polyster Non woven fabric weight not less than 160 Gms/Sqm , top of membrane with granular finish. The overlap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application complete all as specified.

M&L for preparation of newly wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint , complete all as specified.

Preparation of new plaster surface of walls including cornices pilaster etc, and applying two coats of oil bound distemper, complete as specified and directed.

Preparation of old treated plaster surface of walls including cornices pilaster etc, and applying one coat of oil bound distemper, complete as specified and directed.

M&L three coats of white wash including preparation of newly plastered surfaces of ceiling complete all as specified.

M&L one coat of white wash including preparation of old treated plastered surfaces of ceiling complete all as specified.

M&L three coats of white wash including preparation of newly plastered surfaces of wall complete all as specified.

M&L for preparation of new plastered external surfaces of walls and applying two coats cement base paint of approved brand all as specified and as directed .

M&L for preparation of old treated plastered external surfaces of walls and applying one coat cement base paint of approved brand all as specified and as directed .

S & F Harrison rails, 20mm dia (Curtain rails) mild steel, Chromium plated with fixing brackets, stops, rollers etc complete all as specified

M&L 18/20mm thick Granite black colour (of any type) work (table rubbed and polished) as in , cooking platforms and like in cement mortar 1:4 over cement rendering 20mm thick in cement mortar 1:4 including pointing in white cement (1:2) unsing marble dust with admisture of pigment to match with shade of granite complete all as specified & directed.

M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified & directed.

S& F Stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed (sink to be fixed in granite after cutting granite stone to required shape) complete all as specified.

S&F in repair Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PTMT 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, fancy type, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe fixed in repair complete, all as specified & directed

M & L for 18-20mm thick Machine cut Kota stone slab flooring, bedded and jointed with grey cement slurry and pointed with grey cement with admixture or pigment to match the shade of Kota stone slab as approved by GE, laid over and including screed bed or bedding layer of mortar 20mm thick in Cement Mortar (1:6) including cutting, grinding and mirror polishing complete, all as specified and directed.

M & L for machine cut kota stone slab 16 to 18mm thick thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10mm thick rendering in cement mortar 1:4 complete all as specified.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in deep for foundation etc. and getting out in any type of soil, complete all as specified.

M & L for precasted RCC 1:2:4 type B-1 using 20mm grade crushed stone agregate manhole cover slabs of size as per site requirement or as directed by Engr-in-Charge in circular/square/rectangular size as per site requirement and placing on manhole/soakage well/septic tank complete all as specified and directed.

M & L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling & mass concrete all as specified and directed by Engr –in Charge

M & L Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in copings, benching of manhole, and like laid to shape and slope, surface finished even and smooth using extra cement, slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

S&F unplasticisted PVC drainage pipe 160 mm dia wth wall thickness 4.7 mm (minimum) of pressure rating 8 KN/Sqm laid in trenches and joined including testing conforming to IS 15328-2003 complete all as speified and directed.

S&F unplasticisted PVC drainage pipe 200 mm dia wth wall thickness 5.9 mm (minimum) of pressure rating 8 KN/Sqm laid in trenches and joined including testing conforming to IS 15328-2003 complete all as speified and directed.

M & L Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 160mm PVC pipe after they are laid in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. (Note: - PVC pipe and earthwork shall be measured and paid seperately under respective items of BoQ)

M & L Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 200mm PVC pipe after they are laid in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed. (Note: - PVC pipe and earthwork shall be measured and paid seperately under respective items of BoQ)

M&L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC 1:2:4 type B-1 smooth finished and forming benching as required for 110 mm bore complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exceeding 1.5mtr above starting point complete all as specified and directed

Surface excavation n. exc 30cm deep and avg 15cm in foul condition to remove heaps of waste , cleaning flora & fauna , follage and bushes around septic tank , soakage well and manholes and removing debrises/heaps of bushes /vegetation etc from the vicinity and depositing at a place as directed by Engr-in-charge.

M&L 75mm thick PCC 1:4:8 Type D-2 (using 40mm graded crushed stone aggregates) as in sub-base and finishing the surface even & fair complete all as specified.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

M & L vibro compressed precast concrete interlocking paver block shape and size as approved by GE confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed

S & F 20 mm thick PVC board prelaminated one side with decorative choice lamination and other side balancing white lamination, interior grade, fixed with screws to timber/angle iron frame work complete all as specified.

M & L tera kota tiling 10 mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15 mm thick screed bed in cement mortar 1:4 over PCC coping 1:3:6 type C -1 (using 20mm graded crushed stone aggregate) complete all as specified.

M & L vibro compressed chequered cement concrete tiles 300x300x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including 15mm thick screed bedding in cement moratr 1:6 complete all as specified and directed.

Supply and fxing in repair stainless steel plate rack 600 x 600 x 230 mm deep with spoon holders , shelves etc , complete all as specified.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power socket and bulk head fittings) on surface wiring on wooden batten/ casin caping complete including fixture and fittings such as switches, ceiling roses, pandents holder , regulators, sockets, lamp holder, buzzer , light fittings and defective main switch/DB/MCB/Metal plug etc by unscrewing carefully from board etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

M & L Point wiring for light/fan point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

All as per above item no 118.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 118.00 here in before but for one 3 pin socket outlet 5 amp on independent board all as specified and directed.

All as per above item no 118.00 here in before but for one bell/buzzer point controlled by one bell push button on same board with other switch or independentwith cable 1.5 Sqmm size all as specified and directed.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green)

M&L Switch piano flush type 5 Amp single pole one way, (ISI marked), complete all as specified.

S&F Switch bell push flush type 5 Amp single pole one way (ISI marked) complete all as specified

M&L Socket outlet 2 in 1, 5 Amp flush type all as specified & directed.

M&L Switch Socket combintion outlet 2 & 3 pin, 5 Amp flush type ,complete all as specifed.

M&L Switch Socket combintion outlet 2 in 1 , 5 pin, 15 Amp flush type universal,complete all as specifed.

S & F Ceiling rose, 65x50mm three therminals isolated body (ISI marked) complete all as specified.

S& F bell Ding Dong heavy duty 230 volts single pole complete and all as specified. all as specified and directed by Engineer-in-Charge.

Supply and Fix LED tube light fitting with LED 1 X 18/20 W, 230 V Energy efficient, Industrial Box type , housing with reflector cover channel, bi-pin holders, connector block, etc complete with tube rod LED 18/20 Watt, all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and surge protection > 2.5 KV , HPF > 0.9 and efficiency 100lm/watt Make : Crompton Model No DMLNM1T8-16 or Equivalent in Philips/Bajaj/Wipro

Supply and fixing in replacement existing unsv LED ceiling light fitting 10 watt including LED tube rod with suitable holder complete with all accessories prewired and including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as specified .

Supply and fixing in replacement existing unsv LED surface mounted powder coated white CRCA full glow panel 15 watt ( 1 x 1 feet) incorporated with all fixing arrangements complete with all accessories prewired and including connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as specified .

Supply and fixing in replacement existing unsv integrated LED bulk head light fitting 1X9 watts connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

S&F LED Lamp 230 volts,50 Hz inverter LED 12 watt ,lumen 900 lm, rated current 0.045A, CRI less than 80, Charging time 8 to 10 Hours, operating temperature -10 to 50°C, backup time 04 Hours, complete all as specififed and direccted.

S&F Lamp holder PVC/Polycarbonate type with back plate having matching colour to holder for angle/batten fittings (ISI marked) complete all as specified and directed.

S&F ceiling fan 1200mm sweep BEE 5 star rated copper wound double bearing and Stepped type electronic fan regulator suitable for operation on 240 volt AC supply complete all as specified and directed.

S&F Domestic Exhaust fan plastic of 300 mm sweep copper bound double bearing with lowers full plastic body with shutter , higher air flow, low noise suitable for 230 Volts AC 50 Hz electric supply.

S&F Geyser 25 Ltrs capacity, 230 volts, vertical type , BEE with 5 stars rating incl necessay drilling, provn of anchor bolts of suitable size and making electrical connections complete all as directed by Engr-in-charge. Make: Model "monza-ec" of Havells or equivalent models of Bajaj/ Racold/ Usha Lexus/ Voltas

S&F in replacement sheet metal enclosure powder coated factory made versatile double door for VTPN DBs for MCCB provision , 415 volts, 50 Hz, 04 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

S & F MCCB four pole 415 volts 100 Amps with breaking capacity 25 KA with thermal setting and copper lugs, all as specified and as directed by Engr -in-Charge.

S&F Sheet metal enclosure powder coated factory made (Double door) for DBs, single pole and neutral, 240 volts, 50 Hz, 08 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning, complete all as specified.

S & F MCB single pole 240 volts 6 to 32 Amps 'C' curve with rupturing capacity 10 KA, all as specified and as directed by Engr -in-Charge.

S & F MCB single pole & neutral 240 volts 40 Amps 'C' curve with rupturing capacity 10 KA, all as specified and as directed by Engr -in-Charge.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (Earth pit not less than 2.25 Mtr deep below normal ground level )with top edge of the plate not less than 1.5 Mtr below normal ground level connecting with galvanized iron GI earth wire 4mm dia by means of bolt nut check nuts and washers of galvanized iron and provision of GI tubing medium grade (ISI marked)of size 15mm for protection of GI earth wire upto test point, 20mm dia GI light grade watering pipe with funnel and wire mesh, RCC pit cover of size 300x300x40mm reinforced with XPM having weight not less than 4Kg/sqmm including 6mm thick MS bar handle made to shape, PCC pit with 1:3:6 type C1 with angle iron frame made of angle iron of size 40x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, excavation , earth work in any type of soil, removal of excavated soil and returning filling in all as required at site complete all as specified in plate No 3 of SSR Part-I and all as specified or indicated including testing on completion.NOTE :-Rates inclusive of necessary excavation in any type of soil, earth work, PCC pit, RCC cover, funnel with watering pipe, GI earth strip upto 7.5 m long for connecting to test point etc. all as required at site for complete earthing).

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site. Note: Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit.

M&L 15 mm bore steel water tubing , medium grade galvanized with all fittings and fixing complete for inlet connection of water from storage tank complete all as specified.

Supply and fixing stop valve of cast copper alloy with crutch or butterfly handle (ISI marked), screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified.

S & F 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

M&L GI pipe light grade 50 mm bore with all fittings for cable protection fixed to walls/ poles or laid in trenches, under road/ under culvert/ under path/ under floor /on wall etc with fixing clamps, nuts bolts etc all as specified.

Supply laying jointing and testing LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified. Note : Earth work , sand cushioning, GI pipe , brick covering for mechanical protection will be measured and paid separately under respective item of Schedule.

S&F DWC high density polyethelene pipes having dia 63/50 mm, outer dia, inner as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required at site complete all as specified and directed.

Taking out old UNSV existing board including any type of civil work like brick work, plastering and matching to existing wall finishes complete all as specified.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

Ms International Engineers

KALSI CONSTRUCTION CO

MANOTRA BUILDER

Neeraj Enterprises

M/S YASH PAUL RAINA AND CO

Standard engineers