CONSTRUCTION OF WORKING WOMEN HOSTEL AT GANDHI VANITA AASHRAM IN DISTRICT JALANDHAR (BALANCE WORK)

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority :- EXECUTIVE ENGINEER PROVINCIAL DIVISION PWD B&R JALANDHAR

Name of Work :- DNIT FOR CONSTRUCTION OF WORKING WOMEN HOSTEL AT GANDHI VANITA AASHRAM IN DISTRICT JALANDHAR (BALANCE WORK).

Contract No: Civil Works

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 i) CIVIL WORKS:- 2

2 A-1) Construction of Ground Floor 3

3 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with Stone Aggregate 40 mm Gauge and 100mm Fine sand filling using mechanical mixer for mixing of material 4 Sqm Excess(+) Full Conversion INR

4 Screed of 50mm thick cement concrete 1:8:16 with Stone aggregate to be laid below the topping using mechanical mixer for mixing of material 5 Sqm Excess(+) Full Conversion INR

5 Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect 6 Kg. Excess(+) Full Conversion INR

6 Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (iv) (b) Udaipur Green Marble Tiles of thickness 18mm to 20mm. Slabs sizes above 0.50 sqm 7 Sqm Excess(+) Full Conversion INR

7 Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately) (iv) (b) Udaipur Green Marble Tiles of thickness 12mm to 15mm . Slabs sizes above 0.50 Sqm 8 Sqm Excess(+) Full Conversion INR

8 Extra labour for projected nosing of stair case of any shape and design. 9 Rmt. Excess(+) Full Conversion INR

9 Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) (a)Size 600x600 mm 10 Sqm Excess(+) Full Conversion INR

10 Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. 11 Sqm Excess(+) Full Conversion INR

11 Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades. 12 Sqm Excess(+) Full Conversion INR

12 Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 13 Sqm Excess(+) Full Conversion INR

13 Providing and fixing Morwad Marble Strip 12mm to 15mm thick and 100 mm wide in kotah stone flooring over 12.50mm thickness base of cement mortar 1:3 jointed with cement slurry including cost of additional mortar equivalent to the kota stone thickness andcolouring pigment to match the colour rubbed and polished to granolithic finish complete in all respects. Strip in Term of Rmt 100 mm Wide 14 Rmt. Excess(+) Full Conversion INR

14 Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing 15 Sqm Excess(+) Full Conversion INR

15 Extra labour for projected nosing of stair case of any shape and design. 16 Rmt. Excess(+) Full Conversion INR

16 Brick jali with 22.86x11.43cm thick alternative layers laid in cement sand mortar 1:4 using 58 number bricks 17 Sqm Excess(+) Full Conversion INR

17 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 18 Sqm Excess(+) Full Conversion INR

18 Providing and Laying Out Door precast designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3 (1 ordinary cement: 3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer-in-charge. 19 Sqm Excess(+) Full Conversion INR

19 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge 20 Rmt. Excess(+) Full Conversion INR

20 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. 21 Each Excess(+) Full Conversion INR

21 Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. 22 Each Excess(+) Full Conversion INR

22 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 23 Each Excess(+) Full Conversion INR

23 Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 24 Each Excess(+) Full Conversion INR

24 Providing and fixing in position gratings 150mm x 150mm for gully trap. PVC grating (P.T.M.T.) 25 Each Excess(+) Full Conversion INR

25 12.5 mm thick cement plaster 1:5 26 Sqm Excess(+) Full Conversion INR

26 20mm thick cement plaster 1:5 in two coat work 27 Sqm Excess(+) Full Conversion INR

27 12.5 mm thick cement plaster 1:4 28 Sqm Excess(+) Full Conversion INR

28 20mm thick cement plaster 1:4 in two coat work 29 Sqm Excess(+) Full Conversion INR

29 Plastering on underside of ceiling 10mm thick cement plaster 1:4 30 Sqm Excess(+) Full Conversion INR

30 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 31 Sqm Excess(+) Full Conversion INR

31 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 32 Sqm Excess(+) Full Conversion INR

32 Applying priming coat with metal primer on new steel or iron work including preparation of surface. 33 Sqm Excess(+) Full Conversion INR

33 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 34 Sqm Excess(+) Full Conversion INR

34 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 35 Sqm Excess(+) Full Conversion INR

35 Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. 36 Kgs. Excess(+) Full Conversion INR

36 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 37 Sqm Excess(+) Full Conversion INR

37 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 38 Sqm Excess(+) Full Conversion INR

38 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 39 Sqm Excess(+) Full Conversion INR

39 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999) a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 40 Sqm Excess(+) Full Conversion INR

40 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge 41 Rmt. Excess(+) Full Conversion INR

41 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete -c) I.S.I Designation No. III (size of door 851mm to 1000mm) 42 Each Excess(+) Full Conversion INR

42 Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 43 Each Excess(+) Full Conversion INR

43 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 44 Sqm Excess(+) Full Conversion INR

44 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm 45 Sqm Excess(+) Full Conversion INR

45 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300mm x 16mm 46 Each Excess(+) Full Conversion INR

46 Providing & Fixing Fixed Beeding of 12 mm x 12 mm for Fixed Glass with ECO fixed gasket (EPDM) 47 Rmt. Excess(+) Full Conversion INR

47 Providing & fixing Glazing in Door, Window,ventilators & Partition etc.complete as per architectural drawings and the entire satisfaction of the Engineer-in-Charge (Cost of Gasket & Beading Shall be Paid as per Respective Item. (i) Float Glass panes of 5.5 mm thickness 48 Sqm Excess(+) Full Conversion INR

48 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) (a) For fixed portion and chawkhats 49 Kgs. Excess(+) Full Conversion INR

49 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) (b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required 50 Kgs. Excess(+) Full Conversion INR

50 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. 51 Sqm Excess(+) Full Conversion INR

51 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness 52 Sqm Excess(+) Full Conversion INR

52 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge. 53 Each Excess(+) Full Conversion INR

53 Supplying, fitting & fixing of Steel Almirahs at Site of Working Women Hostel at Jalandhar Specification:-(i). The Almirah should be made of prime quality deoxidized CRCA steel-panels 0.8 mm thick & front frame shelf 1.0 mm thick all steel body must be epoxy powder coated to the thickness of 60 microns (ii) 8 leaver locking arrangement with nickel finished die cast handle, there must be a glide screw for levelling purpose iii)III. Size: 4-10” (Width) x 7’00” (Height) x 2’00” (Depth) & 2’-5”(width)x 7’-00” (Height) x 2’00” (Depth) Deviation in dimension ±5% is negotiable) (As per Approved Drawing). 54 Each Excess(+) Full Conversion INR

54 A-2) Construction of First Floor (Balance Part) 55

55 Screed of 50mm thick cement concrete 1:8:16 with Stone aggregate to be laid below the topping using mechanical mixer for mixing of material 56 Sqm Excess(+) Full Conversion INR

56 Extra rate for First Floor 57 Sqm Excess(+) Full Conversion INR

57 Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect 58 Kg. Excess(+) Full Conversion INR

58 Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) (a)Size 600x600 mm 59 Sqm Excess(+) Full Conversion INR

59 Extra rate for First Floor 60 Sqm Excess(+) Full Conversion INR

60 Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size 600x600 mm. 61 Sqm Excess(+) Full Conversion INR

61 Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades. 62 Sqm Excess(+) Full Conversion INR

62 Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 63 Sqm Excess(+) Full Conversion INR

63 Extra rate for First Floor 64 Sqm Excess(+) Full Conversion INR

64 Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing 65 Sqm Excess(+) Full Conversion INR

65 Extra rate for First Floor 66 Sqm Excess(+) Full Conversion INR

66 Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 67 Sqm Excess(+) Full Conversion INR

67 Extra rate for First Floor 68 Sqm Excess(+) Full Conversion INR

68 Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps 69 Sqm Excess(+) Full Conversion INR

69 Extra rate for First Floor 70 Sqm Excess(+) Full Conversion INR

70 Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur Green Marble Tiles of thickness 18mm to 20mm Slabs sizes above 0.50 sqm 71 Sqm Excess(+) Full Conversion INR

71 Extra rate for First Floor 72 Sqm Excess(+) Full Conversion INR

72 Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (iv) Udaipur Green Marble Tiles of thickness 12mm to 15mm (b) Slabs sizes above 0.50 Sqm 73 Sqm Excess(+) Full Conversion INR

73 Extra rate for First Floor 74 Sqm Excess(+) Full Conversion INR

74 Extra labour for projected nosing of stair case of any shape and design. 75 Rmt. Excess(+) Full Conversion INR

75 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 76 Sqm Excess(+) Full Conversion INR

76 Extra rate for First Floor 77 Sqm Excess(+) Full Conversion INR

77 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 78 Sqm Excess(+) Full Conversion INR

78 Extra rate for First Floor 79 Sqm Excess(+) Full Conversion INR

79 12.5 mm thick cement plaster 1:5 80 Sqm Excess(+) Full Conversion INR

80 20mm thick cement plaster 1:5 in two coat work 81 Sqm Excess(+) Full Conversion INR

81 12.5 mm thick cement plaster 1:4 82 Sqm Excess(+) Full Conversion INR

82 20mm thick cement plaster 1:4 in two coat work 83 Sqm Excess(+) Full Conversion INR

83 Bearing Plaster of 10 mm thick cement mortar 1:3 cement sand finished with a floating coat of neat cement and thick coat of Lime wash / P.O.P. on top of walls when dry for bearing of R.C.C. slabs & beams. 84 Sqm Excess(+) Full Conversion INR

84 Plastering on underside of ceiling 10mm thick cement plaster 1:4 85 Sqm Excess(+) Full Conversion INR

85 Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for every additional height of 2 mtr or part thereof (External or Internal) 86 Sqm Excess(+) Full Conversion INR

86 Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. 87 Sqm Excess(+) Full Conversion INR

87 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 88 Sqm Excess(+) Full Conversion INR

88 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 89 Sqm Excess(+) Full Conversion INR

89 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 90 Sqm Excess(+) Full Conversion INR

90 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 91 Sqm Excess(+) Full Conversion INR

91 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. 92 Rmt. Excess(+) Full Conversion INR

92 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 93 Sqm Excess(+) Full Conversion INR

93 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999) (a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 94 Sqm Excess(+) Full Conversion INR

94 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats 95 Kg Excess(+) Full Conversion INR

95 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : (b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required 96 Kg Excess(+) Full Conversion INR

96 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. 97 Sqm Excess(+) Full Conversion INR

97 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) 98 Sqm Excess(+) Full Conversion INR

98 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) 99 No.s Excess(+) Full Conversion INR

99 Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 100 No.s Excess(+) Full Conversion INR

100 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm 101 Sqm Excess(+) Full Conversion INR

101 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : A 300mm x 16mm 102 No.s Excess(+) Full Conversion INR

102 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 103 sqm Excess(+) Full Conversion INR

103 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 104 Sqm Excess(+) Full Conversion INR

104 Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work 105 Kgs. Excess(+) Full Conversion INR

105 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade 106 Sqm Excess(+) Full Conversion INR

106 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge. 107 No.s Excess(+) Full Conversion INR

107 Supplying, fitting & fixing of Steel Almirahs at Site of Working Women Hostel at Jalandhar Specification:-(i). The Almirah should be made of prime quality deoxidized CRCA steel-panels 0.8 mm thick & front frame shelf 1.0 mm thick all steel body must be epoxy powder coated to the thickness of 60 microns (ii) 8 leaver locking arrangement with nickel finished die cast handle, there must be a glide screw for levelling purpose iii)III. Size: 4-10” (Width) x 7’00” (Height) x 2’00” (Depth) & 2’-5”(width)x 7’-00” (Height) x 2’00” (Depth) Deviation in dimension ±5% is negotiable) (As per Approved Drawing). 108 No.s Excess(+) Full Conversion INR

108 A-3) Construction of Second Floor (Balance Part) 109

109 Screed of 50mm thick cement concrete 1:8:16 with stone aggregate to be laid below the topping using mechanical mixer for mixing of material 110 Sqm Excess(+) Full Conversion INR

110 Extra rate for Second Floor 111 Sqm Excess(+) Full Conversion INR

111 Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect 112 Kg Excess(+) Full Conversion INR

112 Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) 113 Sqm Excess(+) Full Conversion INR

113 Extra rate for Second Floor 114 Sqm Excess(+) Full Conversion INR

114 Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. (a )Size 600x600 mm 115 Sqm Excess(+) Full Conversion INR

115 Extra Cost for using darker fast shade Vitrified or Rectified Tiles instead of lighter shades. 116 Sqm Excess(+) Full Conversion INR

116 Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 117 Sqm Excess(+) Full Conversion INR

117 Extra rate for Second Floor 118 Sqm Excess(+) Full Conversion INR

118 Kotah stone tiles 20mm thick in skirting risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing 119 Sqm Excess(+) Full Conversion INR

119 Extra rate for Second Floor 120 Sqm Excess(+) Full Conversion INR

120 Providing and laying Polished Granite stone 18 mm thick flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 121 Sqm Excess(+) Full Conversion INR

121 Extra rate for Second Floor 122 Sqm Excess(+) Full Conversion INR

122 Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. 123 Sqm Excess(+) Full Conversion INR

123 Extra rate for Second Floor 124 Sqm Excess(+) Full Conversion INR

124 Marble stone flooring with 18-20 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : (iv) Udaipur Green Marble Tiles of thickness 18mm to 20mm (b) Slabs sizes above 0.50 sqm 125 Sqm Excess(+) Full Conversion INR

125 Extra rate for Second Floor 126 Sqm Excess(+) Full Conversion INR

126 Marble work of thickness 12-15 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (iv) Udaipur Green Marble Tiles of thickness 12mm to 15mm (b) Slabs sizes above 0.50 Sqm 127 Sqm Excess(+) Full Conversion INR

127 Extra rate for Second Floor 128 Sqm Excess(+) Full Conversion INR

128 Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) 129 Rmt. Excess(+) Full Conversion INR

129 Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. 130 Sqm Excess(+) Full Conversion INR

130 Extra rate for Second Floor 131 Sqm Excess(+) Full Conversion INR

131 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-inCharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 132 Sqm Excess(+) Full Conversion INR

132 Extra rate for Second Floor 133 Sqm Excess(+) Full Conversion INR

133 12.5 mm thick cement plaster 1:5 134 Sqm Excess(+) Full Conversion INR

134 20mm thick cement plaster 1:5 in two coat work 135 Sqm Excess(+) Full Conversion INR

135 12.5 mm thick cement plaster 1:4 136 Sqm Excess(+) Full Conversion INR

136 20mm thick cement plaster 1:4 in two coat work 137 Sqm Excess(+) Full Conversion INR

137 Plastering on underside of ceiling 10mm thick cement plaster 1:4 138 Sqm Excess(+) Full Conversion INR

138 Extra rates for white washing, distempering, painting and decorative cement based paints etc for superstructure Where any single storey height exceeding 4 mtr in height for every additional height of 2 mtr or part thereof (External or Internal) 139 Sqm Excess(+) Full Conversion INR

139 Providing and applying plaster of paris (ISI marked such as JK, Kohinoor, Maharaja etc.) punning 6mm thickness over plastered surface to prepare the surface even and smooth complete in all respect as per the directions of Engineer-in-charge. 140 Sqm Excess(+) Full Conversion INR

140 Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish 141 Sqm Excess(+) Full Conversion INR

141 Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) 142 Sqm Excess(+) Full Conversion INR

142 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 143 Sqm Excess(+) Full Conversion INR

143 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 144 Sqm Excess(+) Full Conversion INR

144 Providing & fixing factory made Solid PVC Chowkhat Door frame of the size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm PVC foam sheet, mitre cut at 2 corners & joined with 2Nos of 150mm long brackets of 15 x 15mm M.S square tube. the two vertical doors profiles are to be reinforced with 19 x 19mm M.S square tube of 19 guage, the door framed shall be fixed to the wall using 65/100mm long M.S screws through the frame by using fasteners. a minimum of 4 nos of screws to be provided for each vertical member & minimum 2nos for horizontal member etc. as per manufacturer's specification,conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in-charge. 145 Rmt. Excess(+) Full Conversion INR

145 Providing and fixing of 30mm thick factory made Polyvinyl Chloride (PVC) door shutter (without chowkhat) made of styles and rails of a UPVC Plug profile section of size 30mm x 60mm and wall thickness 2mm ±0.2mm with inbuilt decorative molding edging on one side. The styles and rails with plastic brackets of size 75x220mm meter and welded at the corners. The- stiles of the shutter reinforced by inserting galvanized MS tube of size 25x20mm and 1mm ± 0.1mm wall thickness. The lock rail made up of ‘H’ section, a UPVC Plug profile section of size 30mm x 100mm and 2mm±0.2mm wall thickness welded to the shutter style with a UPVC Plug profile section single panel of size not less than 620mm, having overall thickness of 20 mm and 1 mm±0.1 mm wall thickness with 20 mm panel beading of suitable size /Glass(4mm thick plain glass)/louver section, louver frame of suitable size, as per manufactures specification and direction of Engineeringcharge. (For WC and bathroom door Shutter) 146 Sqm Excess(+) Full Conversion INR

146 Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1) (1999) a) Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- (iv) 35mm thick 147 sqm Excess(+) Full Conversion INR

147 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats 148 Kg Excess(+) Full Conversion INR

148 Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : (b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required 149 Kg Excess(+) Full Conversion INR

149 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. 150 Sqm Excess(+) Full Conversion INR

150 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness 151 Sqm Excess(+) Full Conversion INR

151 Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (c) I.S.I Designation No. III (size of door 851mm to 1000mm) 152 Each Excess(+) Full Conversion INR

152 Providing & fixing 6" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. 153 Each Excess(+) Full Conversion INR

153 Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm 154 Sqm Excess(+) Full Conversion INR

154 Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : A 300mm x 16mm 155 Each Excess(+) Full Conversion INR

155 Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete. 156 Sqm Excess(+) Full Conversion INR

156 Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. 157 Sqm Excess(+) Full Conversion INR

157 Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. 158 Kgs. Excess(+) Full Conversion INR

158 Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 159 Sqm Excess(+) Full Conversion INR

159 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge. 160 Each Excess(+) Full Conversion INR

160 Supplying, fitting & fixing of Steel Almirahs at Site of Working Women Hostel at Jalandhar Specification:-(i). The Almirah should be made of prime quality deoxidized CRCA steel-panels 0.8 mm thick & front frame shelf 1.0 mm thick all steel body must be epoxy powder coated to the thickness of 60 microns (ii) 8 leaver locking arrangement with nickel finished die cast handle, there must be a glide screw for levelling purpose iii)III. Size: 4-10” (Width) x 7’00” (Height) x 2’00” (Depth) & 2’-5”(width)x 7’-00” (Height) x 2’00” (Depth) Deviation in dimension ±5% is negotiable) (As per Approved Drawing). 161 Each Excess(+) Full Conversion INR

161 A-4) Construction of Mumty & Terrace 162

162 Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing 163 Sqm Excess(+) Full Conversion INR

163 Extra rate for Second Floor 164 Sqm Excess(+) Full Conversion INR

164 Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. 165 Rmt. Excess(+) Full Conversion INR

165 Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 166 Cum Excess(+) Full Conversion INR

166 Extra rate for Second Floor 167 Cum Excess(+) Full Conversion INR

167 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) 168 Sqm Excess(+) Full Conversion INR

168 Extra rate for Second Floor 169 Sqm Excess(+) Full Conversion INR

169 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 170 Sqm Excess(+) Full Conversion INR

170 Extra rate for Second Floor 171 Sqm Excess(+) Full Conversion INR

171 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 172 Qtl. Excess(+) Full Conversion INR

172 Extra rate for Second Floor 173 Qtl. Excess(+) Full Conversion INR

173 Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge 174 Rmt. Excess(+) Full Conversion INR

174 Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. a) UPVC 110 mm bend 175 No.s Excess(+) Full Conversion INR

175 Providing and fixing 110 mm dia. U.P.V.C Coupling/Sockete for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. a) UPVC 110 mm bend 176 No.s Excess(+) Full Conversion INR

176 Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16 177 No.s Excess(+) Full Conversion INR

177 Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm cement concret 1:8:16 including 12.5mm thick cement plaster 1:3 178 No.s Excess(+) Full Conversion INR

178 Providing and fixing in position gratings 150mm x 150mm for gully trap. b) PVC grating (P.T.M.T.) 179 Each Excess(+) Full Conversion INR

179 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 180 Sqm Excess(+) Full Conversion INR

180 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. 181 Cum Excess(+) Full Conversion INR

181 Extra rate for Second Floor 182 Cum Excess(+) Full Conversion INR

182 Centring and shuttering for parapet, fascias and other similar items including edges. 183 Sqm Excess(+) Full Conversion INR

183 Extra rate for Second Floor 184 Sqm Excess(+) Full Conversion INR

184 A-5) Construction of Plinth Protection of Building 185

185 Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres 186 Cum Excess(+) Full Conversion INR

186 Cement concrete 1:8:16 with stone ballast of size. 40 mm guage mixing by mechanical means using concrete mixer volumetric type 187 Cum Excess(+) Full Conversion INR

187 First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth 188 Cum Excess(+) Full Conversion INR

188 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 metres 189 Cum Excess(+) Full Conversion INR

189 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 190 Cum Excess(+) Full Conversion INR

190 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with Stone Aggregate 40 mm Gauge and 100mm Fine sand filling using mechanical mixer for mixing of material 191 Sqm Excess(+) Full Conversion INR

191 Conglomerate floor 40mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material 192 Sqm Excess(+) Full Conversion INR

192 12.5 mm thick cement plaster 1:5 193 Sqm Excess(+) Full Conversion INR

193 A-6) Construction of Boundary Wall 10' High 194

194 Site clearance Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. 195 Sqm Excess(+) Full Conversion INR

195 Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m and Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 196 Cum Excess(+) Full Conversion INR

196 Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% excavated from outside the building plinth in 15 cm layers including ramming, watering and consolidating lead upto 30 metres 197 cum Excess(+) Full Conversion INR

197 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type 198 Cum Excess(+) Full Conversion INR

198 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. 199 Cum Excess(+) Full Conversion INR

199 First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth 200 Cum Excess(+) Full Conversion INR

200 Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. 201 Cum Excess(+) Full Conversion INR

201 Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) 202 Sqm Excess(+) Full Conversion INR

202 Centering and shuttering for columns (Square or rectangular or poly gonal in plain) 203 Sqm Excess(+) Full Conversion INR

203 Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels. 204 Sqm Excess(+) Full Conversion INR

204 Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete 205 Qtl. Excess(+) Full Conversion INR

205 20mm thick cement plaster 1:4 in two coat work 206 Sqm Excess(+) Full Conversion INR

206 Finishing walls with textured exterior paint of required shade with two or more coats applied @ 3.28 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 207 Sqm Excess(+) Full Conversion INR

207 Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm 208 Sqm Excess(+) Full Conversion INR

208 Providing and Fixing of Copper Sheet 16 Gauge 350mm wide on expansion joint including covering with C. Concrete complete in all respect as per specifications. 209 Rmt. Excess(+) Full Conversion INR

209 First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. 210 Cum Excess(+) Full Conversion INR

210 Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded 211 Sqm Excess(+) Full Conversion INR

211 20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded Vertical 212 Sqm Excess(+) Full Conversion INR

212 20mm thick cement plaster in damp proof course 1:3 with two coats of bitumen at 1.65Kg. Per Sqm laid hot and sanded Horizontal 213 Sqm Excess(+) Full Conversion INR

213 A-7) Construction of Outer Infrastructure 214

214 Clearing Grass and Removal of Rubbish Clearing grass and removal of rubbish up to a distance of 50 meters outside the periphery of the area as per technical clause 201 of MORT&H specifications 215 Ha Excess(+) Full Conversion INR

215 Construction of Embankment with Good Quality Earth obtained from Borrow pits Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications 216 Cum Excess(+) Full Conversion INR

216 Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type 217 Cum Excess(+) Full Conversion INR

217 Plain Cement Concrete Pavement Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with OPC 43 grade conforming to IS:383 mixed with concrete mixer using batch type concrete mixer as per IS:1791, laid in position, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications 218 Cum Excess(+) Full Conversion INR

218 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge 219 Sqm Excess(+) Full Conversion INR

219 ELECTRICAL WORK 220

220 D1- Providing Internal Electrical Installations: 221

221 REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES) Derived from 34.01: 222

222 Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- (Derived From CSR 34.01) 223

223 Wiring fan point (without fan box ) 224 Each Excess(+) Full Conversion INR

224 Wiring light point 225 Each Excess(+) Full Conversion INR

225 RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: 226

226 Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 227

227 Wiring call-bell point 228 Each Excess(+) Full Conversion INR

228 Wiring 6 Amp. wall socket point 229 Each Excess(+) Full Conversion INR

229 Wiring 6 Amp. Plug control comprising wall socket point 230 Each Excess(+) Full Conversion INR

230 Wiring 16/20 amp. power plug control point 231 Each Excess(+) Full Conversion INR

231 Wiring light point with double control switches. 232 Each Excess(+) Full Conversion INR

232 RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): 233

233 Wiring air conditioner supply terminal point recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2Module), covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 234

234 Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. 235 Each Excess(+) Full Conversion INR

235 RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Wiring Computer supply terminal points recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules (Modular accessories) for having 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10/16/20Amp. Switches and blanking plate etc., and covered with Frame Plate and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- 236

236 Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories). 237 Each Excess(+) Full Conversion INR

237 RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module),covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 238

238 Wiring TV socket point (one module) 239 Each Excess(+) Full Conversion INR

239 Wiring Telephone socket point RJ11 (one module) 240 Each Excess(+) Full Conversion INR

240 Wiring Networking socket point RJ45 (one module) 241 Each Excess(+) Full Conversion INR

241 PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 242

242 Overall size 1sq.mm (Un-sheathed) 243 mtr. Excess(+) Full Conversion INR

243 Overall size 1.5sq.mm (Un-sheathed) 244 mtr. Excess(+) Full Conversion INR

244 Overall size 2.5sq.mm (Un-sheathed) 245 mtr. Excess(+) Full Conversion INR

245 Overall size 4sq.mm (Un-sheathed) 246 mtr. Excess(+) Full Conversion INR

246 Overall size 6sq.mm (Un-sheathed) 247 mtr. Excess(+) Full Conversion INR

247 Overall size 10sq.mm (Un-sheathed) 248 mtr. Excess(+) Full Conversion INR

248 XLPE INSULATED UN-ARMOURED CABLES (LOOSE):- Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- 249

249 Overall size 70sq.mm (3½ Core) Un-armoured (Loose) 250 Mtr. Excess(+) Full Conversion INR

250 Overall size 120sq.mm (3½ Core) Un-armoured (Loose) 251 Mtr. Excess(+) Full Conversion INR

251 HEAVY GUAGE WELDED CONDUIT PIPES: Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- 252

252 Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick), white painted suspension rod for ceiling fan. 253 mtr. Excess(+) Full Conversion INR

253 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 254

254 Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed 255 mtr. Excess(+) Full Conversion INR

255 Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed 256 mtr. Excess(+) Full Conversion INR

256 Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- 257

257 PVC flexible pipe 40mm dia. 258 mtr. Excess(+) Full Conversion INR

258 G.I. EARTHING :- Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) and with G.I. reducing socket including erection of the same, 10.50 metre (34.44 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 14 metre in length (including boring & refilling). 259

259 Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 14Metre in length) 260 Each Excess(+) Full Conversion INR

260 G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH): Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (Flushed in wall and floor) with sockets, elbows and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface):- 261

261 Additional length G.I. wire 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (Flushed) 262 mtr. Excess(+) Full Conversion INR

262 COPPER EARTHING (Upto 14 metre in Length): 263

263 Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- 264

264 Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) 265 Each Excess(+) Full Conversion INR

265 COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- 266

266 Additional Length 20mm x 3mm thick Copper Tape 267 mtr. Excess(+) Full Conversion INR

267 MCB'S & MCB DISTRIBUTION BOARDS: 268

268 MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 269

269 MCB Single Pole 6-32amp. (10kA, Curve-C) 270 Each Excess(+) Full Conversion INR

270 MCB Triple Pole 40amp. (10kA, Curve-C) 271 Each Excess(+) Full Conversion INR

271 MCB Triple Pole 50, 63amp. (10kA, Curve-C) 272 Each Excess(+) Full Conversion INR

272 MCB Four Pole 40amp. (10kA, Curve-C) 273 Each Excess(+) Full Conversion INR

273 MCB Four Pole 50, 63amp. (10kA, Curve-C) 274 Each Excess(+) Full Conversion INR

274 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's: Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 275

275 TP&N Horizontal Double Door Distribution Board 4 way each 276 Each Excess(+) Full Conversion INR

276 TP&N Horizontal Double Door Distribution Board 6 way each 277 Each Excess(+) Full Conversion INR

277 Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- 278

278 TP&N Double Door Vertical DB's 4 way each (With provision of FP MCCB upto 125amp) 279 Each Excess(+) Full Conversion INR

279 Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:- 280

280 Cable End Box for TPN 4 Way 281 Each Excess(+) Full Conversion INR

281 Cable End Box for TPN 6 Way 282 Each Excess(+) Full Conversion INR

282 MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- 283

283 MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 284 Each Excess(+) Full Conversion INR

284 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- 285

285 Double Walled Corrugated (DWC) HDPE Pipe 90/76mm (Outer/ Inner dia.) 286 mtr. Excess(+) Full Conversion INR

286 Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 287 Each Excess(+) Full Conversion INR

287 Supply and erection of LED batten 40watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 288 Each Excess(+) Full Conversion INR

288 Supply and erection of BEE 3 star AC Ceiling Fan 1200mm (48") with double ball bearing, copper wound, full aluminium body 3Nos of blades. The product should possess a minimum air deleivery of 210 CMM (approx.). The rated speed of the the product must be minimum of 300 revolutions per minute and 5Nos. of speeds. The product should have a manufcaturer's guarantee /warranty of minimum 2 years including flexible wire & petty material etc. for connections and testing complete in all respects as approved and desired by the Engineer in-charge at site. The fan should conform to Technical Specifications attached. 289 Each Excess(+) Full Conversion INR

289 Supply and Erection of Wall fan plastic body 400mm 16" including flexiible wire and petty material etc. for connection and testing complete in all respects as desired by the Engineer in charge of work at site. 290 Each Excess(+) Full Conversion INR

290 Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site 291 Each Excess(+) Full Conversion INR

291 D2- Providing Campus Lighting/ Security Lighting 292

292 PVC INSULATED FR COPPER CONDUCTOR CABLES: 293

293 Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 294

294 Overall size 1.5sq.mm (Un-sheathed) 295 mtr Excess(+) Full Conversion INR

295 XLPE INSULATED UN-ARMOURED CABLES (LOOSE): 296

296 Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- 297

297 Overall size 10sq.mm (4Core) Un-armoured (Loose) 298 mtr Excess(+) Full Conversion INR

298 Overall size 16sq.mm (4Core) Un-armoured (Loose) 299 mtr Excess(+) Full Conversion INR

299 XLPE INSULATED ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- 300

300 Overall size 10sq.mm (2Core) Armoured (On-Surface) 301 mtr. 210.17 Excess(+) Full Conversion INR

301 G.I. EARTHING: 302

302 Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling). 303

303 Earthing with 7/14 S.W.G. (7/2.18mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 8Metre in length) 304 nos Excess(+) Full Conversion INR

304 Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- 305

305 GI Earth rod 20 mm dia., 3 mtr. Long 306 nos Excess(+) Full Conversion INR

306 MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: 307

307 MINIATURE CIRCUIT BREAKERS: 308

308 Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 309

309 MCB Double Pole 6-32amp. (10kA, Curve-C) 310 nos Excess(+) Full Conversion INR

310 MCB Four Pole 50, 63amp. (10kA, Curve-C) 311 nos Excess(+) Full Conversion INR

311 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: 312

312 Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 313

313 TP&N Horizontal Double Door Distribution Board 4 way each 314 nos Excess(+) Full Conversion INR

314 MCCB's (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader terminal links, Extended rotary handle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- 315

315 MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting 316 nos Excess(+) Full Conversion INR

316 MS SHEET ENCLOSURE FOR MCCB's: 317

317 Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:- 318

318 MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm) 319 nos Excess(+) Full Conversion INR

319 GI PIPE POLES & BRACKETS: SINGLE/ DOUBLE/ TRIPLE/ FOUR/ SIX ARMS BRACKET FOR STEEL TUBULAR POLE: 320

320 Supply and erection of G.I. Pipe 50mm dia. (Medium) Single/ Double/ Triple arm bracket of suitable length welded with MS canopy 80mm inner dia., outer dia 89.5mm (Medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3Nos. ½" x 1½" size nut bolt fully threaded. The bracket should have MS sheet (1.62mm thick) ring of 89.5mm dia. for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angle 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225/300/375mm x 150mm x 5mm thick (225mm for 1.5m, 300mm for 2m & 375mm for 2.5m long bracket) with two coats of an approved aluminium paint as desired by Engineer-in-charge at site:- 321

321 Single Arm Bracket 1 metre Long for Steel Tubular Pole (7 to 8m) 322 nos Excess(+) Full Conversion INR

322 3-STEPPED STEEL TUBULAR POLE: 323

323 Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SP-Mpa) of suitable length confirming to IS: 2713- (PART-II)-1980 (Steel tubes confirming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminium paint as required:- 324

324 Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre, 1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.5mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg. (410 SP-2) and base Plate weight 7.5 kg. of size 12mm thick about 30 cm dia. 325 nos Excess(+) Full Conversion INR

325 CEMENT CONCRETE MUFFS: 326

326 Making of Cement Concrete muff of suitable size and length with 1:2:4 cement concrete mixture. The muff is to be made around the steel tubular pole sufficient to completely flush a SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirming to IS:14772, inner dimensions 250mm x 200mm x 100mm with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's). The SMC Junction Box is to be fixed with the pole by a MS flat clamp of size 20mm x 2mm thick. PVC pipe 40mm dia. (2No.x0.60m) should be provided for incoming and outgoing cables. The outer surface of the muff shall be finished with pure cement & two coats of white snowcem complete in all respect as approved and desired by the Engineer In-Charge at site:- 327

327 Cement Concrete Muff of Overall Size 450mm dia., 80cm Long 328 nos Excess(+) Full Conversion INR

328 Supply and erection of SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772 (Recessed/ On surface), robustly constructed, safe & shock proof, rust & tamper proof of suitable inner & outer dimensions with ± 10% tolerance in size & hinged water tight cover with locking arrangement having 1No. terminal strip with 4Nos. terminals & 1No. Single pole MCB of required capacity fixed on din bar (Din Bar Provision for 2Nos. MCB's) complete in all respect as approved and desired by the Engineer In-Charge at site:- 329

329 SMC Junction Box (Glass Fibre reinforced polyester sheet moulding compound) confirm to IS:14772, inner dimensions 140mm x 140mm x 95mm with hinged water tight cover with locking arrangement 330 nos Excess(+) Full Conversion INR

330 DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: 331

331 Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation placing the pipe in position and back filling with excavated soil etc. of the required size:- 332

332 Double Walled Corrugated HDPE Pipe 50/ 38mm (Outer/ Inner dia.) 333 mtr Excess(+) Full Conversion INR

333 SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT LINE ITEMS, MS CHANNELS, BRASS GLANDS, ALUMINIUM & COPPER THIMBLES: CUBICAL PEDESTAL: 334

334 Supply and erection of Sheet metal cubical pedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with single/ double door openable placed on MS strip of size 12.5mm x 2.5mm thick welded with MS sheet, 4Nos. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs. Front door welded x-sectionally with MS flat 25mmx5mm. The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high and pedestal with 4 Nos. supporting members each of MS flat 50mmx6mm thick according to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint & bonding to the existing earth. The Pedestal platform should be filled with 1:2:4 cement concrete mixture and erected 150mm high from the top of the cement concrete platform. The job is to be completed as approved by Engineer-in-charge:- 335

335 Cubical Size 1200mm high, 900mm wide and 350mm deep with platform dimensions 1000mm x 450mm x 450mm 336 nos Excess(+) Full Conversion INR

336 Supply, Erection of LED Street Light 45w (including LED driver) in aluminium pressure die cast housing with toughned glass cover (IP66 Protection) having efficiency of LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270volt, input frequency 50Hz + 3% complete along with erection of the same with connections, testing etc. fitting should install on existing pole complete in all respects as approved and desired by the Engineer-in-charge at site. The certification and Specification of the LED fitting should be as approved by O/o Advisor(Technical), Govt. of Punjab vide Letter no. AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 337 nos Excess(+) Full Conversion INR

337 Supply and erection of LED Flood Light 120watt (including LED driver),Pressure Die cast aluminium with efficacy of LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 1 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Techlical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. 338 nos Excess(+) Full Conversion INR

338 Supply and erection of LED Post top 40/45 watt Opal Diffuser Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with pressure die cast or extruded aluminium housing with control gear (IP 66 protection), THD<10%, CRI minimum 70, High power LED with wattage 1 to 5 Watt with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, Min IK07, efficacy of LED fixture minimum 120 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab. 339 nos Excess(+) Full Conversion INR

340 S/E of Microprocessor Based Street Light Controller with digital time switch daily programmed with stand by lithium battery with back up of 6 years with min. time between 2 switching operations is 1 minute, three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer and other accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelite sheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheet metal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as per satisfaction of Engineer-in-charge:- 341

341 Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp. (2NO+2NC) with coil voltage 220V AC, 3 Nos. MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) 342 nos Excess(+) Full Conversion INR

342 D3-Supply, Installation, Testing and Commissioning of 1 Nos. Lift of 13 Passengers Machine Room Less. 343

343 Supply, Installation, Testing and Commissioning of 1 Nos. Lift of 13 Passengers Machine Room Less. Type and Capacity: Approximately 884 Kg. 13 Passengers "Speed: 1.0 Meter per second "Type of drive: AC Variable Voltage Variable Frequency with 16-Bit Microprocessor. "Motor: Permanent Magnet Gearless Machine to be hoisted on the top of guide rail within the elevator hoist way *Travel: Approximately 8 meter Serving: 3 Floors_3 Stops_3 Openings_3 Levels (All on the same side) "Hoist way Required: 2600mm (Wide) x 1900mm (Deep) Clear dimensions "Headroom Height (HR): 5000 mm beyond finished floor level of last landing *Pit Depth: 1600mm below the finish floor level of first landing "Car Size Area: Minimum 2.06 square meter and Maximum 2.20 square meter Car Enclosure: Constructed out of stainless steel Scratch proof Finish (Vandal Proof). Car Entrance: Center Opening Automatic Doors with vision panel (40% area should be visible by glass) of Stainless steel finish panel in Scratch Resistance/ Vandal proof with a clear opening of 900mm (wide) x 2000mm (high) "Door operation: Automatic DC Door operation with adjustable door opening and closing timings "Control: Simplex full selective collective control with and without attentdent "Operation: Automatic *Power Supply: 415 Volts, 3-phase, 50Hz Alternating Current *Flooring: Floor Skid - Resistant as per standard *Fan: Blower Fan in Car for ventilation with Auto cut off "Lighting: LED for Car Lighting "Indicators: LED Dot matrix / Digital 3 segement direction and position indicators in the car and at all landings *Hand Rail: Stainless Steel round Hand rail not less than 600mm long at 900mm above floor level (Side LH, Side RH & Rear) Call Button Height: Call button (Outside the lift) placed at a height between 800mm-1meter from the floor level "Control Panel Height: Control panel placed at a height between 800mm-1meter from the floor level "All std. Govt. features. 344

344 Other Features 1. Battery operated emergency light with rechargeable battery 2. Battery operated emergency alarm with rechargeable battery 3. Adjustable Guide shoes 4. Micro movement LED based buttons 5. Door Open and Close buttons 6. Emergency Intercom provided inside the elevator 7. Emergency Intercom usable without the voice communication 8. Load weighing device with overload bypass feature and Overload function with Audio Visual indication 9. Steel items, door frames sill angle's, fascia plates, spring buffers 10. Automatic phase reversal device and Phase Failure protection 11. Call registration 12. Audio & Video System installted in the lift indicating arrival at a floor 13. Manual break lever 14. Additional car gate lock 15. Automatic break testing infrared safety curten 16. Braille Buttons (Inside and outside) with Braille instructions for the communication system 17. Kick plate/Skirting 18. Lift anoucement system to announce floor level's in english language only and indication of door for entrance/exit is either Open or Close 19. Car Operating Panel 20. Car plateform constructed out of cold rolled grain oreinted formed sheets of steel 21. Phase two device fire man drive 22. Fire Man switch at main lobby 23. Car false ceiling in stainless steel 24. Pit ladder 25. Anti Nuisance car call protection 26. Door Nudging 27. Automated Resuce Device to bring the elevator to the nearest landing in case of power failure. 28. The provision of mirror on the wall of the lift car opposite the lift door not extend below 900mm from the lift floor to avoid confusing people with impaired sight. 29. The emergency communication system should be coupled with an induction loop system installed all around the lift. Telephone units, where provided, should have an inbuilt inductive coupler to assist persons using hearing aids. 30. The floor of the lift car should be slip resistant and have similar frictional qualities to the floor of the lift landing to decrease the risk of stumbling. 31. The use of visually and acaustically reflection wall surface should be minimum with in the lift car as visual reflection can cause discomfort and effect the visula ability of people with impairements. 345 Job Excess(+) Full Conversion INR

345 COPPER EARTHING (Upto 14 metre in Length): 346

346 Earthing with electrolytic Copper Tape rivetted (with 5Nos. copper rivets)/Steel Nut & bolts (with 4Nos. 32mm long, 8mm thick with washer and double nut) to 30cm x 120cm x 2mm thick copper plate (made cylindrical) burried 10.50 metre (34.44 feet) below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the Copper Tape recessed in wall and in floor etc., up to 14metre in Length (including bore Length). G.I. pipe 20mm dia. (A-class), 9metre long should be laid in the hole of excavation 1 feet below ground level and having GI Reducer 50mm x 20mm with PVC Cap (For pouring water) fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of First class bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm (Heavy) around the hole of excavation:- 347

347 Earthing with 20mm x 3mm Copper Tape (upto 14Metre in Length) 348 Each Excess(+) Full Conversion INR

348 COPPER EARTHING STRIP (As Additional Length): Fixing additional Length of earthing with Copper Tape (On Surface/Flushed) with petty material as required etc.:- 349

349 Additional Length 20mm x 3mm thick Copper Tape 350 mtr. Excess(+) Full Conversion INR

350 PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 351

351 Overall size 6sq.mm (Un-sheathed) 352 mtr. Excess(+) Full Conversion INR

352 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 353

353 Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed 354 mtr. Excess(+) Full Conversion INR

354 MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: 355

355 MINIATURE CIRCUIT BREAKERS: 356

356 Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- 357

357 MCB Single Pole 6-32amp. (10kA, Curve-C) 358 nos Excess(+) Full Conversion INR

358 MCB Four Pole 50, 63amp. (10kA, Curve-C) 359 nos Excess(+) Full Conversion INR

359 SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's: 360

360 Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- 361

361 SP&N Double Door Distribution Board 8 way each 362 nos Excess(+) Full Conversion INR

362 Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site 363 Each Excess(+) Full Conversion INR

363 Supply and erection of LED batten 20watt LED (including LED driver) with High quality extruded aluminium with efficacy of LED fixture minimum 100 lumens per watt and operating voltage between 140 to 270 volt, input AC frequency 50 Hz ± 3 % complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site.The certification and Specifications of the LED Fitting's should be as approved by O/o Advisor (Technical), Govt of Punjab vide Letter no.AT/2021/GL/1410-1422 Dated 06/05/2021. 364 Each Excess(+) Full Conversion INR

364 D4- CCTV 365

365 Supply, erection, testing & commissioning of IP Bullet/Dome Vari Focal CAMERA 5MP IP Camera STQC Approved with Audio Input Support and following features Resolution - 5 MP (2592 x 1944), Sensor Type and Size-1/2.8" SONY - CMOS 5MP Active Pixel Progressive Scan, Back Illuminated Image sensor, Minimum Illumination Color - 0.01 Lux @F1.2 (AGC ON), Monochrome - 0 Lux, Focal Length 2.8mm – 12mm Focus Range - 0.3m to infinity, Field of View (FOV) HFOV – 106 - 32°,VFOV- 73-23,DFOV 142-39, Focus-Automatic focus Aperture (F#) F 1.6 - F 2.8,Iris Type Motorized varifocal, IR Range Up to 50m, IR Led Wavelength 850nm, IR Switching Auto/ Manual , Audio IN 1,Audio OUT 1,Two-way Audio Supported, Audio Compression G.726 and G.711μ Alarm In Yes, Alarm Out Yes, SD Card Up to 512GB, Camera Adjustment Angle Pan: 0° to 360° Tilt: 0° to 90° Rotate: 0° to 360°,No of Stream Profiles 4, Stream Profiles- Profile 1: Mainstream - 2592*1944@ 30fps (H.265/H.264), Profile 2: Sub stream - D1@30fps (H.265/ H.264), Profile 3: MJPEG - 2048*1536@8fps (MJPEG) or D1/VGA@15fps(H.264/H.265) Profile 4:1920*1080@30fps (H.265/H.264/MJPEG) Available Resolutions 2592 x 1944, 2592 x 1520, 2048 x 1536, 1920 x 1080, 720p, D1, VGA, 2CIF, CIF, Max Resolution 2592 x 1944, Bitrate 128 kbps-16Mbps, Bitrate Type CBR, VBR, Video Compression H.265, H.264, MJPEG, Frame Rate 1-30fps, Shutter Speed 1/15s -1/100000s,Adaptive Streaming Yes, ONVIF Profiles S, G, and T, Edge Recording Yes, Alarm Recording Pre and Post, Motion Recording Yes, Time Triggered Yes, Video Parameters Snapshot, Region of Interest (ROI), BLC, HLC, Day/Night Settings, Privacy Masks 8, WDR True WDR (120dB), SNR >70dB Image Enhancement Saturation/ Contrast/ Sharpness/Brightness/Auto Exposure/HVS- Forensics/ Smart IR DNR 2D &3D Video Analytics, Motion/No Motion Detection, Tamper Detection, Trip/No Trip Detection, Object Intrusion/Zone Intrusion, Audio Exception, IP Conflict Yes, Network Disconnect Yes, Storage Full Yes, Upload Image SD, NAS, SFTP, Upload Clip SD, NAS, SFTP Notifications E-mail, SMS, TCP, Supported protocols, TCP/IP, UDP, HTTP, HTTPS, DHCP, DNS, Dyn DNS, DDNS, RTP, RTCP, RTSP, PPPOE, SMTP, NTP, SNMP, FTP, TLS/SSL, SFTP, ICMP, IGMPv2 & v3, ARP, 802.1x, IPv4, IPv6, QoS Layer 3, DSCP, CIFS, SSH, UPnP, Bonjour, Web Viewer Supported in IE 8.0-11.0, Firefox 15.0-47.0, Chrome 20.0-54.0, Browser IE, Chrome, Mozilla, CYBER SECURITY as per ISO/IEC 27402-Secure boot Yes, Signed firmware Yes, Data Encryption All data, including sensitive data, is encrypted with AES 256 and RSA 2048, IP Address Filtering Yes, HTTPs Streaming Yes, using TLS 1.2, Edge Data Encryption Yes, Network Authentication Yes,802.1x Network authentication, Secure Firmware Upgrade Yes, Anti-roll back firmware Yes, Web login Password protection Yes, Unused debug interface protection Yes, Power Supply 12V (DC); 802.3af (PoE), Power Consumption Approximately 7W, Operating Humidity Less than 95% RH (non- condensing), Operating Temperature -30°C to 60°C,Storage NAS, SD Card, BIS, CE, IP67, FCC Part- 15 Subpart – B, ONVIF S, G & T, IK10, UL, NEMA 4X* complete in all respect as per satisfaction of the Engineer in charge of the work. 366 Each Excess(+) Full Conversion INR

366 Supply, erection, testing & commissioning of OF 32 Channel IP INPUT 12MP NVR 4K with 4 SATA having following features:- Up to 32 Channel Input, 4 Sata Interfaces, Up To 12TB each, H.265/H.264 Video Formats, 1 HDMI Port , USB2.0*1, USB2.0*2 Support,2×RJ45 Self-adaptive 10/100/1000 Mbps Network Interfaces, Supports live view, storage and playback of the connected camera at up to 12MP resolution, Connectable to the Third Party Network Cameras, Incoming Bandwidth -200M, Outgoing Bandwidth- 200M, Recording Resolution-12 MP/8 MP/5 MP/4 MP/3 MP/1080p/720p, Recording Compression, Audio: G.711a,G.711u, Video : H.264/H.265, H.264+/H.265+, Speed -12MP:30fps 8MP:120fps 4MP:240fps 2MP:480fps, Playback- 1080P:480fps Max 16CH, WEB -IE10/11, Safari V12.1 above, Firefox V.52 above, Google chrome V.57 above, Edge V.79 above, Protocols-TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, UPnP, HTTP, HTTPS, API -Onvif (profile S/G/T HDMI -1(1024*768, 1280*720, 1280*1024, 1440*900, 1920*1080, 2560*1440(2K), 3840*2160(4K)) 0 /EDID) Async out, Ethernet-2 RJ45 100/1000 Base-T USB USB2.0*1(front), USB 2.0 *1 USB 2.0 *1 (rear), Audio-1 in / 1 out, E-sata-1 ,HDD 4, each up to 12TB, OSD Language English, Input Voltage/ Current 12V/5A, Power consumption (excluding hard disk) -8W Operating Temperature/Humidity-Temperature :- 10°C~+50°C (14°F ~ 122°F) Humidity : Less than 90%RH complete in all respects as approved and desired by the Engineer-in-charge at site. 367 Each Excess(+) Full Conversion INR

367 Supply, erection, testing & commissioning of 6000GB Audio Video HDD 3.5 Inches Connector SATA, Interface SATA, Operating Temperature 0°C to 65°C, Transfer Rate minimum 160MB/s, Recording Technology – CMR, Certifications BSMI, ICES-003/NMB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB- Scheme, TUV, UL for NVR recording and playbac complete in all respects as approved and desired by the Engineer in-charge at site. 368 Each Excess(+) Full Conversion INR

368 Supply, erection, testing & commissioning of 08 Port POE 60+ Watts L2 managed 10/100/1000 Mbps Data switch with 2 RJ45/SFP 1G Ports • IEEE 802.3u 100BASE-TX Fast Ethernet• IEEE 802.3ab 1000BASET Gigabit Ethernet• IEEE 802.3az Energy- Efficient Ethernet (EEE)• ANSI/IEEE 802.3 NWay autonegotiation• IEEE 802.3x Flow Control, Standards • IEEE 802.3 10BASE-T Ethernet Switching Fabric • 50 Gbps Data Transfer Rates • Gigabit Ethernet • 2000 Mbps (full- duplex) • Fast Ethernet • 100 Mbps (half-duplex) • 200 Mbps (full-duplex)• Ethernet • 10 Mbps (half-duplex)• 20 Mbps (full-duplex), PoE Standards • IEEE 802.3af • IEEE 802.3at PoE-capable Ports • Ports 1 to 2 Power 60W • 60+ W (30 W max. per PoE port). CPU RAM 256MB or above Certification - FCC class A, CE class A, VCCI, BSMI, CCC, CE, LVD, UL, CB Oper Temp- -5 to 50 °C (23 to 122 °F) complete in all respects as approved and desired by the Engineer-in-charge at site. 369 Each Excess(+) Full Conversion INR

369 Supply, erection, testing & commissioning of Smart 55” LED Commercial Panel /Regular with 2 HDMI Port, TV Input, 3 Years Warranty, 2 HDMI Port, TV Input, 3 Years Warranty, Resolution 4K, Brightness 300 cd/m2 Support 4K Ultra HD 20 Watt 2.0 Audio Output Web Browser Soft AP, WiFi (bandwidth) Screen Share (Miracast) Samsung TV Plus App USB Cloning, 2 No. Of HDMI Port,2 no USB Port .complete in all respects as approved and desired by the Engineer-in-charge at site. 370 Each Excess(+) Full Conversion INR

370 Supply, Installation, Testing & Commissioning of 10 meter long superior quality 4K HDMI Cable having speed upto 10gbps support all types of HDMI Devices complete in all respects as approved and desired by the Engineer in-charge at site. 371 Each Excess(+) Full Conversion INR

371 Supply, erection, testing & commissioning of RJ-45 Male connector . complete in all respect as per satisfaction of the Engineer in charge of the work. 372 Each Excess(+) Full Conversion INR

372 Supply, erection, testing & commissioning of 9U Wall mount 19’’ Rack with glass door,lock & key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks. complete in all respects as approved and desired by the Engineer in-charge at site. 373 Each Excess(+) Full Conversion INR

373 Supply, Installation, Testing & Commissioning of 1000VA LIT UPS/ Power Plant with SMF batteries having 30 Minutes backup time, Cold Start, 3 No. plug Indian style, Automatic Voltage Controller, Overload protection, Over charging Protection, 2 No. 12v 7Ah Batteries, Wide Input Range, Fan Less Cooling system, Transfer time less than 8ms,Audible Alarm etc. complete in all respects as approved and desired by the Engineer in-charge at site. 374 Each Excess(+) Full Conversion INR

374 COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES: 375

375 Supply and erection of CAT 6 with 23AWG solid bare copper conductor, special grade PE insulation with star separator, 4pair Unshielded Twisted Pair (UTP) industrial cable, FR PVC sheathed, Class-E, 250 MHz of bandwidth, supporting data transfer speeds of up to 10 Gbps (10GBASE-T) for distances up to approximately 180 feet, cables are manufactured and tested to meet the ANSI/TIA 568-C.2 and ISO/IEC 11801 Class E standards left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 376

376 CAT 6 LAN cable 377 mtr. Excess(+) Full Conversion INR

377 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 378

378 Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed 379 mtr. Excess(+) Full Conversion INR

379 D5-PA System 380

380 Supply & erection of 23” Gooseneck Microphone with stand having on/off switch, frequency response 20- 18,000Hz, Sensitivity 7.5mV/Pa, Power Source 1.5V- 9VDC, Impedance 1000Ω with 10 meter long Twin core shielded low noise cable with XLR connector & 6.3mm phone jack, heavy duty metal base with anti skid feet, Built in cell housing, 2 no. AA size cell. 381 Each Excess(+) Full Conversion INR

381 Supply & erection of Advanced PA Amplifier with Built-in Digital Player System comprises of following features:- 220V AC & 12V DC operation ,125 watt PA Amplifier, 5 Mic & 2 Aux input MP3 Recorder & player USB & Card Reader Remote control Intelligent sound reinforcement Speaker output @ 4Ω 8 Ω & 70V /100V Active Bass & Treble Control LED Display with Multimedia control 2.5” built-in speaker to programme check 1 Year onsite warranty. 382 Each Excess(+) Full Conversion INR

382 Supply & erection of wall mounting column speaker 15W/100V, frequency response 150-15,000Hz, 23 Watt max, SPL at 1kHz-91.5db/1W/1M, Power Tap 15/10/5/2.5Watt. 383 Each Excess(+) Full Conversion INR

383 Supply & erection superior quality 2 core copperconductor transparent Speaker wire 1 sqmm. 384 mtr. Excess(+) Full Conversion INR

384 Supply, erection, testing & commissioning of 9U Wall mount 19’’ Rack with glass door,lock & key facility 400/450/500mm depth AC Fan having 10 no. mounting hardware, Cable entry/exit provision at top and bottom panels, Ventilation slots on top, bottom and side panels, Fixed side panels, Comply IS Standard of Racks. complete in all respects as approved and desired by the Engineer in-charge at site. 385 Each Excess(+) Full Conversion INR

385 PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- 386

386 Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed 387 mtr. Excess(+) Full Conversion INR

387 D6- Providing Manually Operated Fire Alarms System Including Exit Signage : 388

388 Supply Installation, Testing & Commissioning of Conventional 2 Zone Fire Alarm Control Panel Fully confirms IS 2189 with 2 Nos. of 12v,7Ah batteries and with built in charger,LCD display and LED indication for zonewise Fire, Open, Short,Zone isolation,Mains on,Battery Low, Fuse blown, AC Fail.The enclosure of shouls be fire proof and constructed by CRCA sheet with powder coated finish. The 20mm knock out are given for cable entry at the top of the cabinet complete in all respects as approved and desired by the Engineer in-charge at site. 389 Nos Excess(+) Full Conversion INR

389 Supply,installation, testing & Commissioning of Red Conventional Call Point with LED Resistor 470 OHM Flush Mounting Flexi Element complete in all respects as approved and desired by the Engineer in-charge at site. 390 Nos Excess(+) Full Conversion INR

390 Supply, installation, testing & Commissioning of Red Mini Horn Red UL certified India complete in all respects as approved and desired by the Engineer in-charge at site. 391 Nos Excess(+) Full Conversion INR

391 Supply, installation, testing & Commissioning of ExiLED M ST LED LED based exit sign with dimming function, Reading distance, exit sign Two-sided 25m, Voltage 220-240VAC / 50-60Hz, Power consumption 3.3W / 3.5VA, Battery 3.6V/1.2Ah NiMH, Battery protection Over charge protection /deep discharge protection, Charging Time 16 hours, Battery back-up time 1 hour / 3 hours / 8 hours (from dip switch), Light source 15 LED, Approvals EN 60598-1, EN 60598-2-22, EN 55015, EN 61547, EN 61000-3-2, EN 61000-3-3, Ambient temperature 5 to 40 °C, Humidity Up to 95%, IK rating IK09, IP rating IP40, Dimensions 265 x 53 x 222 mm, Weight 540 / 742 gr , Colour Anodized aluminum / black plastic, Materials Aluminum, Acrylic Plate, Mounting method Ceiling, wall bracket, suspended, pendulum, flag mount, Delivered as self-contained/auto test luminaire Choice of 1, 3 or 8 hour autonomy via DIP switch IP 40 – dustproof luminaire Reading distance upto 25 meters.High lumen output – 1h = 180lm / 3h = 110lm /8h = 40lm Technical lifetime of LED > 100 000 hours , 4 Pictograms (left, right, down, up) are included in the luminaire ordering part code complete in all respects as approved and desired by the Engineer in-charge at site. 392 Nos Excess(+) Full Conversion INR

392 Supply, Installation, Testing & Commissioning of 1000VA LIT UPS/ Power Plant with SMF batteries having 30 Minutes backup time, Cold Start, 3 No. plug Indian style, Automatic Voltage Controller, Overload protection, Over charging Protection, 2 No. 12v 7Ah Batteries, Wide Input Range, Fan Less Cooling system, Transfer time less than 8ms,Audible Alarm etc. complete in all respects as approved and desired by the Engineer in-charge at site. 393 Nos Excess(+) Full Conversion INR

393 PVC INSULATED FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- 394

394 Overall size 1.5sq.mm (Un-sheathed) 395 mtr. Excess(+) Full Conversion INR

395 HEAVY GUAGE WELDED CONDUIT PIPES: Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:- 396

396 Heavy gauge welded conduit pipe 25mm dia. (ISI marked 1.60mm thick) Flushed 397 mtr. Excess(+) Full Conversion INR

397 D7-Providing Advance Lightning Protection System: 398

398 Supply, erection, testing & commisioning of Early Streamer Emission (ESE) type Lightning ProtectionComplete with Lightning Air Terminal. The System should be corrosion resistant stainless steelchrome body capable of working in hazardous atmosphere and protecting against direct Lightning point as well conducting /diverting it to earth completely after tracing the Lightning in advance. As perNF C 17-102:2011 the air terminal should be tested for Lightning impulse current (10/350 micro sec)=100 KA and for local certification the air terminal should be tested for switching impulse current of 40 KA (8/20 micro sec) as per CPRI with 5 positive and 5 negative impulse. The ESE Terminals shalloffer a protection radius of 79mtr., Level-1 High Protection and preferably to be mounted on roof topand center of the building / blocks with the highly insulated polyplastic adaptor with the Mast. (Its working principle evolves from local electrostatic field that develops naturally around the system as athunderstorm begins to gather. In the event of descending lightning, an inbuilt triggering devicegenerates high tension pulses at the conductor tip, causing a ‘corona effect’.) Protection radius of 79Mtr at level 1 & 107 Mtr at level 4 .Complete in all respects as per satisfcation of the Engineer incharge at site. 399 Nos Excess(+) Full Conversion INR

399 Supply and fixing of GI Mast 5 mtr. height along with suitable base plate for mounting the terminal along with highly insulated adopter to mount ESE Air Terminal with the Mast.The Adapter shall have suitable Metal connector /Connecting point in such a way the top portion shall be electrically connected to the central tip of the ESE terminal and bottom portion connected to the down conducto, stray wires along with support shall be securely fixed with base plate and gauge wires where ever required.Complete in all respects as per satisfcation of the Engineer in-charge at site. 400 Nos Excess(+) Full Conversion INR

400 Supply and installation of Lightning Strike Counter (6 digit display) of non-resettable(electromechanical) type which allows the automatic counting of the strikes received by the lightning protection system. This information is used to enhance lightning protection security & increase the effectiveness of inspection & maintenance procedures. It should be in IP-65 enclosure with minimum sensitivity of 1KA and maximum capacity 100KA. No external power source is required. It should be installed always 2 mtrs. above the ground level.Complete in all respects as per satisfcation of the Engineer in-charge at site. 401 Nos Excess(+) Full Conversion INR

401 Supply & erection of test Link of non-corroding, weather proof, water proof polycarbonate IP 65/55 enclosure including providing of 2 Nos. of insulated supports with suitable holes prefitted nuts & bolts to fix the down conductor & earth wire. The transparent cover fitted at approximately 500-1000mm from ground level shall be provided on each down conductor.Complete in all respects as per satisfcation of the Engineer in-charge at site. 402 Nos Excess(+) Full Conversion INR

402 Supply, installation & testing of chemical earthing (Maintenance Free Earthing) system with UL approved copper bonded rod and exothermically welded copper busbar both tested by CPRI at 50kA Fault Current. A copper bonded steel rod shall have 3000 mm length and 17.2 mm dia. with copper coating thickness of minimum 250 microns. Along with earth enhancement compound tested by ROHS complying IEC 62561-7 in a sealed bag of minimum 50 kg (25 kg Bag x 2). A copper clad steel solid ground wire of 8 mm dia. for interconnecting earth pits. Each earth pit shall be covered with heavy duty weather proof environment friendly polyplastic earth pit chamber. The grounding minerals should not be pollute the ground water. The grounding minerals shall be tested & certified for the resistivity of less than 0.12 ohm-mtr.Complete in all respects as per satisfcation of the Engineer incharge at site. 403 Nos Excess(+) Full Conversion INR

403 Cost of pole foundation with earth work in excavation in foundations trenches etc. 0.25 meter below ground level, Cement Concrete 1:4:8 with stone ballast, Reinforced cement concrete M-20,Cold twisted deformed (Ribbed/tor Steel Bar) Bars Fe 500 grade as per IS 1786-2008 complete in all respect as desired by engineer in charge. 404 Nos Excess(+) Full Conversion INR

404 PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- 405

405 Overall size 70sq.mm (Un-sheathed) (Conductor connected the air terminal to earthing) 406 mtr. Excess(+) Full Conversion INR

406 D7-Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant 407

407 Supply, Installation, testing & Commissioing of Grid interactive PV System Solar Power Plant 24KW (i.e connected to utility grid) of +500 watt including required quantities of SPV modules (High power density Perc Bifacial Monocrytalline based) formed into arrays, their mounting arrangement, Power conditioning units (i.e String Solar Inverter), required DC & AC distribution panels with surge protection units, cabling from terrace to main distribution board through Cable tray, Bi Directional Energy Meter, Required Earthing (i.e. 2 Nos.GI Strip Earthing for GI Structure, 2Nos. GI Strip Earthing for String Inverter, AC & DC Distribution System), ESE Stroke master (As per NFC 17 102 Standard with suitable radius of protection) & 3 Nos. chemical earthing with copper bonded rods along with high rise GPSP structure (Rated Wind Speed 170Kph) including mounting height upto 8 feet Complete with transportaion, fabrication, labour & Civil Work. Features:- 1. Solar PV Module Warranty 25 Years & Certified Under IS/IEC 61730 I & II, IS/ IEC 61701 & IS/IEC 14286 2. Power Conditioning Unit (String Solar Inverter) & Certified under IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-3, IEC 61683, EN 50530, IEC 60068-2-1, 2, 14, 30, EN 60529 3. Structure : 25 Years Service Life with AMC & Certified under IS 2062:2011 4. Complete Plant Insurance for the period of 5 Years 5. Annual Maintenance Contarct for the period of 10 Years The Work will got done from approved MNRE (Ministry of New and Renewable Energy)/ PEDA (Punjab Energy Development Agency) Contractors/ PWD enlisted contractor, subject to condition that he will get work alone from PEDA/MNRE approved contractor. The rates are inclusive of bi- directional meter testing charge, PSPCL connection charges, unidirectional meter cost and all type of taxes including G.S.T. 408 KW Excess(+) Full Conversion INR

408 PUBLIC HEALTH WORK 409

409 Sub Head-1 Internal Sewerage System 410

410 Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. 411

411 Single Socket Type B 412

412 110mm o/d SWR UPVC pipe lines laid complete 413 mtr Excess(+) Full Conversion INR

413 Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. 414

414 qty as per Table Atached 415

415 For 110mm o/d pipes 416

416 Elbow 90 Degree (All side socketed) 417 Nos Excess(+) Full Conversion INR

417 Vent Cowls 418 Nos Excess(+) Full Conversion INR

418 Coupler 419 Nos Excess(+) Full Conversion INR

419 P Trap/Floor Trap 110mm x 110mm 420 Nos Excess(+) Full Conversion INR

420 Single Y-Junction with door 421 26 Nos Excess(+) Full Conversion INR

421 Single Tee 422 40 Nos Excess(+) Full Conversion INR

422 Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) 423

423 110mm o/d 424 330 Nos Excess(+) Full Conversion INR

424 Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification of reputed firm of the self cleaning design with S.S. grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. 425

425 With 100mm x 75mm i/d Floor Trap (weighing 5.8 Kg) 426 Nos Excess(+) Full Conversion INR

426 Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. . 427

427 M.S. Holder bats clamps for 100mm i/d H.C.I. pipes 428 Nos Excess(+) Full Conversion INR

428 Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm 429

429 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm 430 Nos Excess(+) Full Conversion INR

430 Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming toI.S.I complete as per standard design. 431

431 600mm x 900mm inside with 455mm x 455mm cover and frame light duty double seal 432 Nos Excess(+) Full Conversion INR

432 Extra for every 0.30 metre depth of inspection chamber. 433

433 600mm x 900mm inside 434 Nos Excess(+) Full Conversion INR

434 Cement concrete 1:2:4 435

435 a With stone ballast or shingle 436

436 mixing by mechanical means using concrete mixer volumetric type 437 cum Excess(+) Full Conversion INR

437 Sub Head-1 Estate Sewerage System 438

438 Providing, laying in trenches to correct gradient and alignment and jointing of UPVC pipes having ISI specification IS:15328-2003 class-SN-8 marked make Supreme, Finolex, Kissan, Jain, Prince or equivalent good on them and laying the same in trenches to correct alignment and gradients, cutting and jointing, testing for water tightness and making good the leakages and defects including cost of specials (Specials and Solvent should be of same make as that of pipes) complete in all respects. 439

439 110mm O/D Foe IC to Manhole Connection 440 mtr. Excess(+) Full Conversion INR

440 160mm o/d pipe 441 mtr. Excess(+) Full Conversion INR

441 200mm i/d pipe 442 mtr. Excess(+) Full Conversion INR

442 Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I. pipes in external work 443

443 For 200mm O/D pipe 444 cum Excess(+) Full Conversion INR

444 For 160mm O/D pipe 445 cum Excess(+) Full Conversion INR

445 Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer- in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. 446

446 For depths not exceeding 3.0 metre B.G.L. For all classes of soil except rocky 447

447 For Sewer Line 200 mm dia 448 cum Excess(+) Full Conversion INR

448 Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. 449

449 Inside size 75x120 cm with depth 120 cm deep 450 No Excess(+) Full Conversion INR

450 Inside size 90x150 cm with depth 120 cm deep 451 No Excess(+) Full Conversion INR

451 Making connection of newly laid sewer in walls of existing manhole of fully charge sewer including cost of pluging sewer, desilting, removal of sullage water and making good of khudda 452

452 Sewer connections upto 300 mm id 453 No Excess(+) Full Conversion INR

453 Sub Head-1 Internal Water Supply System 454

454 CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in- Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. 455

455 CPVC SDR 11 Pipe & fitting 16mm o/d 456 mtr Excess(+) Full Conversion INR

456 SDR 11 CPVC pipes & fittings 20mm o/d 457 mtr Excess(+) Full Conversion INR

457 CPVC SDR 11 Pipe & fitting 25mmo/d 458 481 mtr Excess(+) Full Conversion INR

458 CPVC SDR 11 Pipe & fitting 32mm o/d 459 mtr Excess(+) Full Conversion INR

459 CPVC SDR 11 Pipe & fitting 40mm o/d 460 mtr Excess(+) Full Conversion INR

460 Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition.Size 75mm x 75mm 461

461 qty same as CPVC P 15mm +20mm +25 mm +32 mm 462 mtr Excess(+) Full Conversion INR

462 Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. 463

463 Through wall 11.43 cm thick 464 nos Excess(+) Full Conversion INR

464 Through wall 22.86 cm thick 465 nos Excess(+) Full Conversion INR

465 Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 466

466 20mm i/d Brass Ball valves 467 3 Each Excess(+) Full Conversion INR

467 25mm i/d Brass Ball valves 468 16 Each Excess(+) Full Conversion INR

468 32mm i/d Brass Ball valves 469 9 Each Excess(+) Full Conversion INR

469 40mm i/d Brass Ball valves 470 4 Each Excess(+) Full Conversion INR

470 50mm i/d Brass Ball valves 471 2 Each Excess(+) Full Conversion INR

471 Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. 472 1 Each Excess(+) Full Conversion INR

472 Providing and fixing in position G.I tank nipple of approved make in pvc water storage tank complete 473

473 25mm i/d 474 8 each Excess(+) Full Conversion INR

474 32mm i/d 475 6 each Excess(+) Full Conversion INR

475 40mm i/d 476 2 each Excess(+) Full Conversion INR

476 Providing and fixing jointing G.I Union coupling as per IS 1879 in GI pipe lines complete. 477

477 25mm i/d 478 8 each Excess(+) Full Conversion INR

478 32mm i/d 479 6 each Excess(+) Full Conversion INR

479 40mm i/d 480 2 each Excess(+) Full Conversion INR

480 Sub Head-2 Estate Water Supply 481

481 Providing & fixing PVC Pipes & Specials 10Kg / cm2 including cost of earth work in excavation & back filing complete as per analysis A-14 A (By Manually) 482

482 For 90 mm o/d PVC Pipe 483 mtr Excess(+) Full Conversion INR

483 Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge) Class PN-1 as per ISI 484

484 80 mm i/d Sluice Valves Flanged 485 Each Excess(+) Full Conversion INR

485 Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department each of size 0.6m x 0.6m 486 Each Excess(+) Full Conversion INR

486 Sub Work - 3 Sanitary Installation & Water Cooler 487

487 Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge. 488 Nos Excess(+) Full Conversion INR

488 Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. 489 Nos Excess(+) Full Conversion INR

489 Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut 490 Nos Excess(+) Full Conversion INR

490 Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. 491

491 Size 550 mm x 400 mm x 815 mm 492 Nos Excess(+) Full Conversion INR

492 Providing and fixing in position SS Grab Bar Grade 304 of approved make (to the approval of the Engineer-in-charge) fixed in to wall with brass screws complete in all respect. 493

493 Foldable U Type 762mm long 494 Nos Excess(+) Full Conversion INR

494 35mm dia 1200mm (48”) long 495 Nos Excess(+) Full Conversion INR

495 35mm dia 600mm (24”) long 496 Nos Excess(+) Full Conversion INR

496 Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect. 497 Nos Excess(+) Full Conversion INR

497 Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. 498

498 Vitreous chinaware standard white pedestal for wash hand basin 499 Nos Excess(+) Full Conversion INR

499 Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (e) PVC tube connection of size 15 mm x 300 mm with C.P. Brass nut 500 Nos Excess(+) Full Conversion INR

500 Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.. 501 Nos Excess(+) Full Conversion INR

501 Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. 502 Nos Excess(+) Full Conversion INR

502 Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. 503

503 C.P. brass Bib cock long nose/ long body foam flow without flange 504 Nos Excess(+) Full Conversion INR

504 C.P. brass Bib cock foam flow without flange 505 Nos Excess(+) Full Conversion INR

505 Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. 506

506 C.P.brass 15mm Concealed stop cock with flange. 507 Nos Excess(+) Full Conversion INR

507 C.P.brass 15mm Angle valve without flange 508 Nos Excess(+) Full Conversion INR

508 Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. 509 each Excess(+) Full Conversion INR

509 Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. i) C.P. Brass extension piece, 25mm long to 50mm long 510 each Excess(+) Full Conversion INR

510 Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) (a) Size 600mmx450mm 511 Nos Excess(+) Full Conversion INR

511 Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks 512

512 2000 ltr Capacity 513 ltr Excess(+) Full Conversion INR

513 Providing and fixing in position automatic brass Ball Cock in tanks. 25mm i/d B Brass Ball Cock with rod and Plastic Ball 514 Nos Excess(+) Full Conversion INR

514 Construction of Plateform for 2000 ltr capacity complete as per specification & as desired by Enginer-in-charge 515 Nos Excess(+) Full Conversion INR

515 Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect. 516

516 Sink with drain board overall size 1070x464mm bowl size 430x355x200mm and waste coupling 517 Nos Excess(+) Full Conversion INR

517 Double bowl Sink without drain board Overall size 1114 x 490 mm with bowl size 460x385x200mm including waste coupling 518 Nos Excess(+) Full Conversion INR

518 Providing & fixing in position C.P brass Sink mixer swivel spout (Wall mounted) of approved make (to the approval of Engineer- in-charge) complete in all respect. 519 Nos Excess(+) Full Conversion INR

519 Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. 520 Nos Excess(+) Full Conversion INR

520 Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer- in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. 521

521 C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm 522 Nos Excess(+) Full Conversion INR

522 Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. 523

523 C.P. brass towel Rails size 15mm dia 610mm long 524 24 Each Excess(+) Full Conversion INR

524 C.P brass towel ring 525 37 Each Excess(+) Full Conversion INR

525 Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. 526 21 Each Excess(+) Full Conversion INR

526 Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. 527

527 25 litre capacity water heater 528 18 Each Excess(+) Full Conversion INR

528 Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 40 80 G, cooling capacity Ltrs/hr. 40, storage type capacity 80 Ltrs. Stainless Steel Tank including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site.Make...USHA / Blue Star / Bajaj – or its equivalent. 529 Nos Excess(+) Full Conversion INR

529 AUTOMATIC VOLTAGE STABLIZER: 530

530 Supply and erection of Single phase copper wound Automatic voltage stablizer of suitable capacity electronically controlled circuit with input voltage 140-260 volts single phase AC supply and output voltage 220 ± 5% volts single phase AC supply having main silicon core copper wound step up transformer with suitable nos. of turns on primary side and secondary side the transformer should be fully insulated inside the MS sheet box of suitable size. There should be power control relay and single pole MCB (C-curve, 10kA) of suitable capacity complete with internal copper wiring along with amp. meter and volt meter, high voltage cut off 280 volt input (240 volt output) and 90 volt maximum boost and overloading protection to be provided:- 531

531 Automatic Voltage Stablizer 2 KVA 532 Each Excess(+) Full Conversion INR

532 Providing & fixing in position Commercial RO without reservoir with four no cartridge/ membrane having flow rate 50 ltr/hr with 6 stage purification process of approved make (to the approval of Engineer-in-charge ) including carriage and fixing in position complete in all respect. 533 Nos Excess(+) Full Conversion INR

533 Sub Work-4 Flooring and Wall Tile 534

534 Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of cement) 535 sqm Excess(+) Full Conversion INR

535 Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material 536 sqm Excess(+) Full Conversion INR

536 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 537

537 Area same as screed of all the floors 538 sqm Excess(+) Full Conversion INR

538 Providing and laying Rectified Porcelin floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 ( 1 Cement : 4 Fine sand) for new flooring or laid with cement based high polymer modified quick set tile adhesive (water based) of approved make IS 15477 marked using 5 Kg adhesive per Sqm of tile area in average 3mm thickness over existing floor, including pointing the joints with white cement and matching pigments etc., complete 539 sqm Excess(+) Full Conversion INR

539 Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 540 sqm Excess(+) Full Conversion INR

540 Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. 541 mtr. Excess(+) Full Conversion INR

541 Roof Top Rain Water harvesting System 542

542 Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 543

543 200mm o/d pipe of 4 Kgf. / sqcm 544 mtr. Excess(+) Full Conversion INR

544 For Rain water Line 160mm i/d PVC pipe 6 Kgf. / sqcm For connection of Road gully and sewer @ 7mtr. Each per road gully 545 mtr. Excess(+) Full Conversion INR

545 Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses, sumps, screening chambers and other similar works having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer- in-charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in all respects. 546

546 For depths not exceeding 3.0 metre but not excluding 4.5 m B.G.L. For all classes of soil except rocky 547 cum Excess(+) Full Conversion INR

547 Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge 548 nos Excess(+) Full Conversion INR

548 Constructing brick masonry road gully chambers as per standard drawings (as per sizes given below) including dressing of beds and sides of chambers to exact profiles, 15cm thick C.C 1:6:12 in foundation, first class brick work laid in cement sand mortar 1:5, 40mm thick cement concrete 1:2:4 topping inside the chamber with a floating coat of 1.5mm thick neat cement laid in one operation to the topping, the entire inner surface of the chamber rendered with neat cement not less than 12.50mm in thickness of 1:2 cement sand plaster and finished with a floating coat of neat cement 1mm thick left absolutely smooth polished and correct to template including cost of precasted RCC road gully grating and frame including paint with coal tar (as specified in item No. 29.49) complete and to the requirement of the 549

549 Size 610mm x 457mm x 800mm No. of Road Gully @ 15mtr. C/c Distance 550 nos Excess(+) Full Conversion INR

550 Construction of Rain water recharge well 3.00mtr dia with working depth 2.50 mtr dia consisting of drilling bore 300mm dia 100mtr, supplying and lowering pvc perforated housing pipe 150 mm dia 55mtr sorrunded with filtermedia , PVC 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 6 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2Nos RCC Man hole cover conneted with collecting chamber size 1.5mtr x 3mtr x 2.5 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates). 551 No Excess(+) Full Conversion INR

551 Sub Work 3 Fire Fighting Arrangements 552

552 Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 4.5kg capacity 553 Each Excess(+) Full Conversion INR

553 Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect. 6kg Capacity 554 Each Excess(+) Full Conversion INR

554 SITC of MS Pipe Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. 555

555 80mm internal diameter 556 Mtr Excess(+) Full Conversion INR

556 Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank). 557

557 two Way inlet connection 558 Each Excess(+) Full Conversion INR

558 Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect. 559 Each Excess(+) Full Conversion INR

559 Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required 560 Each Excess(+) Full Conversion INR

560 XLPE INSULATED ARMOURED CABLES (UNDERGROUND): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid 1metre below ground level including excavation, sand cushioning, covering with sand & First Class bricks and back filling the trench etc., of the required size as per PWD General Specifications:- 561

561 Overall size 16sq.mm (3Core) Armoured (Underground) 562 Mtr Excess(+) Full Conversion INR

562 Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Tripple Layer Tanks 563

563 10000 ltr Capacity 564 ltr Excess(+) Full Conversion INR

564 Providing and fixing in position automatic brass Ball Cock in tanks. Brass Ball Cock with rod and Plastic Ball 565

565 Brass Ball Cock with rod and Plastic Ball 32mm i/d 566 Each Excess(+) Full Conversion INR

566 Providing and fixing in position cPVC. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. 567

567 63mm i/d Cpvc Tank Nipple 568 Each Excess(+) Full Conversion INR

568 Construction of Plateform complete as per specification & as desired by Enginer-in-charge 569

569 For 10000 ltr Water Tank 570 Job Excess(+) Full Conversion INR

570 Supply Installation, testing & commissioning of pump having 65mm suction, 50mm delivery, CI casing, bronze impeller and C-40 shaft with gland packed arrangement coupled on common base plate to Make Kirloskar/ABB/CGL (at our option) 7.5 kw/10HP, 2935RPM TEFC sq cage induction motor supply confirming to through suitable flexible coupling The pump set is suitable for following duties the pump is designed following duties total head 35 mtr flow 450 LPM including cost of Electrical control panel complete in all respect as per specifications. 571 Job Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information