COMPREHENSIVE MAINTENANCE TO CERTAIN BLDG AT ADHOC TRANSIT CAMP AT POULTRY FARM AREA UNDER GE NORTH DELHI CANTT10

Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified.

Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified.

Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site.

S&F factory made Pressed steel frames confirming to IS , having profile of size 125 x 60 mm, 1.25mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate, etc. and fixing only 100mm size hinges,with one shop coat of zinc chromate primer and fixing complete all as specified.

S&F factory made Pressed steel frames confirming to IS , having profile of size 105 x 60 mm, 1.25mm thick MS Sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate, etc. and fixing only 100mm size hinges,with one shop coat of zinc chromate primer and fixing complete all as specified.

M&L for PCC type C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete in frame filling , gaps in between glazed & flyfproof steel window, cills, railling up to 60 cm in height etc including necessary form work as required all complete.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M&L factory made solid panel PVC plain colour door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site complete all as specified & directed.

S&F of factory made 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified.

S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed.

S&F of SS butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified .

S&F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified .

S&F aluminium anodised extruded fabricated type handle 150mm long complete all as specified.

S&F Aluminium alloy anodised sliding door bolt 250mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified .

S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified .

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified .

S&F steel window with side hung shutters incl. projecting type hinges with steel handles steel peg stay fixing lugs complete with glazing bar 10 cm devetailed or welded incl one shop coat red oxide primer incl taking down of old steel windows of any size complete all as specified and as directed.

Description all as per Item No. 18 above but without glazing bars complete all as Specified.

Description all as per Item No. 18 above but steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etc complete with or without glazing bars incl taking down of old steel ventilators of any size complete all as Specified.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as Specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed.

Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one.

S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

M&L for 5.5mm thick sheet glass ordinary quality and glazing in square exc. 0.5 Sqm in each pane as in Aluminium door & windows incl supplying and fixing of necessary aluminium cleats, rubber gaskets etc and making good complete all as specified

S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm

S&F in repair stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm

Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

M&L for brick works with fly ash bricks old size straight or curved on plain exc mean radius built in cement mortar 1:6 complete as directed.

Brickwork with subclass `B' bricks, straight or curved on plan exc mean radius built in cement mortar 1:6 complete as directed (Except brick)

Taking down cement plaster on wall of any desription incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for ready mix plaster of 15mm thick on old brick or concrete surface with bulk density 1.4 to 1.7 Kg,. Water ratio 17 to 19 % by weight compressive strength as per IS 4031 part 6 applied as per manufacturer instructions including taking down old cement plaster all as specified and directed.

M&L for preparation new internal wall surfaces with 1mm thick one coat wall putty and applying two coats of distemper acrylic emulsion over one coat of primer complete all as specified and directed .

M&L for one coat of acrylic distemper over 1mm thick wall putty on old surface of wall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots

M&L for for preparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as diracted.

M&L for preparation of new surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L for preparation of old decorative surface of wall and applying two coat of of colour/white wash to match the colour of existing surface all as specified as diracted.

M&L for washing,rubbing down and scraping of old decorated surface and preparation of old ceiling plastered surfaces for applying one coats of white wash on wall as specified as diracted.

M&L for washing,rubbing down and scraping of old decorated surface and preparation of old wall plastered surfaces for applying one coats of white/colour wash on wall as specified as diracted..

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking down cement plaster.

M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed.

S&F for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match complete all as specified and as directed

M&L Glazed ceramic / Digital elevation coloured tiles in vertical surface 600x300x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to match as specified as diracted.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to recive a wall tiles using cement morter 1:4 as specified as diracted.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick cement plaster (1:6) including roundingt the exposed surfaces of granite complete all as specified.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) Type C-2 (20mm graded aggregate) as in plinth protection incl finishing the concrete surface even and smooth w/o using extra cement complete all as specified. Note:- The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12mm wide and 50mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume.

M&L for 75mm thick cement concrete type D2, 1:4:8 using 40mm graded crushed stone aggregate as in sub base to flooring etc similar works,complete all as specified.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore complete all as specified.

S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete.

Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 15mm bore complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore complete all as specified.

S&F of Tubes, medium grade, 20mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified.

Dismantling water tank exc 250 & n.exc 1000 ltr capacity and removing to store complete all as specified.

Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20mm dia and (Minimum weight 20mm - 210 gms ) . Note:- (i) GI inlet, outlet & wash out pipe will be measured paid for separately.

S&F in repairs 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .Make-ESSCO, COS-CHR-103037 or equivalent complete all as specified.

S&F in repair consealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe.Make -ESSCO ,TQT-CHR-514E or equivalent complete all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair 15mm bore CP Stop cock of any colour high pressure screwed for iron pipe and fixed.complete all as specified.

S&F in repairs of CP swivel shower of any coloured for fixing with 15mm pipe complete all as specified.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400mm size including CP waste coupling, PVC connection 450mm long,waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand.

Supply and Fix in repairs 15mm bore pillar taps, capstan head, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F vitreous china squatting pan"Orissa" pattern size 580x440mm white with intgeral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S" trap fron or back inlet etc including connection to trap tand flushing pipe and provision of lime concrete bedding complete all as specified and as directed in repairs including demolition of existing one

S&F in repairs vitreous china wash down water closet pedstal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium/PVC hinging complete all as specified. Make : Hindware, Parryware, CERA

S&F in repair PVC low level dual flushing cistern 10 ltr capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour complete all as specified & directed Make:- Hindware or equivalent in Parryware.

S&F in repair Vitreous China Urinal, Half stall type, white with flush pipe,connecting pipe & waste pipe, CP urinal spreader complete all as specified.

S&F in repair Urinal 8mm thick glass partition of size 450 x 900mm incl all fittings and fixture complete all as specified.

S&F in repair 15mm dia brass chromium plated angle cock with flange.(Make-ESSCO , Code-APR CHR-101053) complete all as specified.

S&F grating doom 125mm dia with waste hole of CP (min wt 40 gms)

Taking down PVC/AC pipe of any dia & any description incl all fittings complete all as specified.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified.

S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified.

S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed

S&F 110mm dia PVC (SWR) junction single 'T' equal or unequal with access door Complete all as specified and as directed.

S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like

Formwork to Fins, fascias, louvres, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like Fair finished surfaces of concrete flat complete

M&L Mild steel TMT bars 6mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality

Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl roughening of old concrete suirface of roof by wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed .

M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for laying APP base plymeric membrane, finished even and smooth without using extra cement complete all as speified and as directed.

M&l for Cleaning the entire area first by broom, chipping unwanted area using chisel and hammer, cleaning/ smoothening by wire brush, washing the entire surface using waterjet and finally by broom and airjet and Applying one layer of cement and Nushar make CCP mix in the ratio Cement:CCP:Water::1:1:0.2 and mixing it thoroughly using electric mixer coating to be done atleast 1’ longitudinally to secure edges and Filling all visible cracks using Nushar crack pack master/ Nushar make Cladofix. Laying 66 gsm non woven fiber along with 2nd and 3rd coat of CCP mix and cement mixture as in step 2 . Filling overlapping joints using Nushar make Master adhesive. Apply 1st coat of Nushar make Polymembrane coat using brush across the area. After curing of above layer apply second coat of Polymembrane coat. Apply 1st coat of Nushar make Nano top coat. Ponding test to be done by filling atleast ½” water in the entire area. Removing the water after the test is successfully completed. Apply 2nd layer of Nushar make Nano top coat to finish the work.

M&L for water proofing treatrment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top :- (a) Applying bitumenous primer @ 0.4 ltrs per Sqm over plastered surfaces of roof incl parapet surface. Note:- Bituminuous primer shall be "TANK MASTIC" manufactured by "EMUFALTE" manufactured by M/s Texsa India Ltd. or equivalent (b) Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3mm thick weight not less than 3.5 Kgs per Sqm reinforced with non woven polyester febric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note :- (i) Laying APP bassed polymenic membrane shall be done torch on methed or as per manufacturer's instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer's instruction. (iii) Applying two coats of Aluminium paint over APP membrane.) (iv) Cutting groove in brick wall 75mm wide and 65mm deep and shoping horizontal face of groove with cement mortar 1:3

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed.

S&F powder coated anodised aluminium frame of size 100mm x 44mm x 1.8mm thick made of Square/tubular Aluminium section for Door with one or more rebates jointing cleat for fixing etc and provision of aluminium shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodised snap beading, screws, hold fast, Aluminium hinges 2Nos 100mm long for each shutter, stopper, locking arrangements handle 5.5mm thick tinted glass fixed in panels and all as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) area not exceeding 2.00 sqm each all as specified as directed by Engineer In Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprisin of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) all as spd and as directed. Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately.

S&F powder coated aluminium grill (DG 104) guard bar mesh size not less than 65mmX65mm with dia of bar not less than 8mm thick fixed to flat aluminium windows complete all as specified and as directed.

M&L for providing & fixing factory made solid PVC cup board/kitchen cabinet shutter (Flush type) of 24mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardant and having good screw holding capacity complete all as specified and directed.

M&L for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich panel with 1mm thick plain PVC sheet on both sides suitably fixed in complete all as specified and directed

S&F SS in repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed.

S&F SS in repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (cup and saucers basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed.

S&F SS in repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (plate basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed.

S&F in repair SS wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (cutlery basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc,complete all as specified and as directed.

S&F SS in repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (Grain trolley basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed.

S&F magnetic catcher as approved by GE, fixed with nut and bolt complete all as specifed and directed.

M&L for water proofing treatment to sunken floor with the following course of treatment/ specification: (i) Cleaning top surface of floors /slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufactrrer's instruction laid in slope 1:20 towards spouts including coveting corners (ii) 15mm thick plastering in CM (1:4) on sides mixed with WPC as pe rmanufacturer's instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed wth acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs. (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with accrylic based polymer modified cementenous compound @ 0.126 kg/sqm.This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyutethene paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drainout accumulated water. (vii) Sunken floor shall be tested for water tighness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone agreegate

S&F 25mm dia SS curtain rod with require brackets, decorative peace on ends with teak finish apearance as in repairs

Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet

S&F false ceilling with Gl powder coated frame work and 4mm thick,(E-board) non asbesto fibre reinforced cement board, reinforced design board tiles conforming to IS-14862,of approved texture at aii height duly suspended ceilling laid on hot dip galvanised iron imposed drid of size 600mm x600mm ,T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details. (a) 27mm x 27mm angle 0.55mm thickness,GI powder coated hot dip glvanised plugged at the rate 600mm centreto center alongwith te perimeter of wall. (b) 25 mmx 25mm Tee 0.55mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6mm dia GI wire suspendrs (not exc 1.2 mtr length) with ajustable clamps and dash true fastners plugged in RCC slab or angle iron runner of slopped roof placed at the rate 600mm centre to centre alongwith the premeter of wall. Note:- The work shall be carried out as per manufacturer instruction and as directed.

Taking down Wall panelling and similar work as specified as diracted..

S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings .

S&F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section ,Tube etc), including distance pieces, cleats etc. confirming to Fe - 410- W including cutting, welding & necessary fittings such as nut bolt, plate etc. complete all as specified and directed.

M&L providing WPC jallies 24mm thick incl fixing materials and frame work & taking down old RCC jallies complete all as specified and directed.

S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for dismentaling/demolition of RCC fins/parapets of any size incl. cutting down rusted reinforcement and makig good with CM 1:3 and provided drip course 25 mmx10mm deep with CM 1:3 at edges of RCC slab/chajjas etc complete all as specified and directed.